iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

hwmon: Add Maxim MAX6620 hardware monitoring driver

Browse Source 
Add hardware monitoring driver for Maxim MAX6620 Fan controller

Originally-from: L. Grunenberg <contact@lgrunenberg.de>
Originally-from: Cumulus Networks <support@cumulusnetworks.com>
Originally-from: Shuotian Cheng <shuche@microsoft.com>
Signed-off-by: Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Arun Saravanan Balachandran 2021-09-13 13:40:15 +00:00 committed by Guenter Roeck
parent d73287eed7
commit e8ac01e5db
5 changed files with 572 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/hwmon/index.rst
View File

@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers
max31785
max31790
max34440
max6620
max6639
max6642
max6650

46
Documentation/hwmon/max6620.rst Normal file
View File

@ -0,0 +1,46 @@
.. SPDX-License-Identifier: GPL-2.0-or-later
Kernel driver max6620
=====================
Supported chips:
Maxim MAX6620
Prefix: 'max6620'
Addresses scanned: none
Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
Authors:
- L\. Grunenberg <contact@lgrunenberg.de>
- Cumulus Networks <support@cumulusnetworks.com>
- Shuotian Cheng <shuche@microsoft.com>
- Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
Description
-----------
This driver implements support for Maxim MAX6620 fan controller.
The driver configures the fan controller in RPM mode. To give the readings more
range or accuracy, the desired value can be set by a programmable register
(1, 2, 4, 8, 16 or 32). Set higher values for larger speeds.
The driver provides the following sensor access in sysfs:
================ ======= =====================================================
fan[1-4]_alarm ro Fan alarm.
fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values
are 1, 2, 4, 8, 16 and 32.
fan[1-4]_input ro Fan speed in RPM.
fan[1-4]_target rw Desired fan speed in RPM.
================ ======= =====================================================
Usage notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
details.

10
drivers/hwmon/Kconfig
View File

@ -1032,6 +1032,16 @@ config SENSORS_MAX31730
This driver can also be built as a module. If so, the module
will be called max31730.
config SENSORS_MAX6620
tristate "Maxim MAX6620 fan controller"
depends on I2C
help
If you say yes here you get support for the MAX6620
fan controller.
This driver can also be built as a module. If so, the module
will be called max6620.
config SENSORS_MAX6621
tristate "Maxim MAX6621 sensor chip"
depends on I2C

1
drivers/hwmon/Makefile
View File

@ -135,6 +135,7 @@ obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
obj-$(CONFIG_SENSORS_MAX197) += max197.o
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
obj-$(CONFIG_SENSORS_MAX31730) += max31730.o
obj-$(CONFIG_SENSORS_MAX6620) += max6620.o
obj-$(CONFIG_SENSORS_MAX6621) += max6621.o
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o

514
drivers/hwmon/max6620.c Normal file
View File

@ -0,0 +1,514 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware monitoring driver for Maxim MAX6620
*
* Originally from L. Grunenberg.
* (C) 2012 by L. Grunenberg <contact@lgrunenberg.de>
*
* Copyright (c) 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
*
* based on code written by :
* 2007 by Hans J. Koch <hjk@hansjkoch.de>
* John Morris <john.morris@spirentcom.com>
* Copyright (c) 2003 Spirent Communications
* and Claus Gindhart <claus.gindhart@kontron.com>
*
* This module has only been tested with the MAX6620 chip.
*
* The datasheet was last seen at:
*
* http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
*
*/
#include <linux/bits.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
/*
* MAX 6620 registers
*/
#define MAX6620_REG_CONFIG 0x00
#define MAX6620_REG_FAULT 0x01
#define MAX6620_REG_CONF_FAN0 0x02
#define MAX6620_REG_CONF_FAN1 0x03
#define MAX6620_REG_CONF_FAN2 0x04
#define MAX6620_REG_CONF_FAN3 0x05
#define MAX6620_REG_DYN_FAN0 0x06
#define MAX6620_REG_DYN_FAN1 0x07
#define MAX6620_REG_DYN_FAN2 0x08
#define MAX6620_REG_DYN_FAN3 0x09
#define MAX6620_REG_TACH0 0x10
#define MAX6620_REG_TACH1 0x12
#define MAX6620_REG_TACH2 0x14
#define MAX6620_REG_TACH3 0x16
#define MAX6620_REG_VOLT0 0x18
#define MAX6620_REG_VOLT1 0x1A
#define MAX6620_REG_VOLT2 0x1C
#define MAX6620_REG_VOLT3 0x1E
#define MAX6620_REG_TAR0 0x20
#define MAX6620_REG_TAR1 0x22
#define MAX6620_REG_TAR2 0x24
#define MAX6620_REG_TAR3 0x26
#define MAX6620_REG_DAC0 0x28
#define MAX6620_REG_DAC1 0x2A
#define MAX6620_REG_DAC2 0x2C
#define MAX6620_REG_DAC3 0x2E
/*
* Config register bits
*/
#define MAX6620_CFG_RUN BIT(7)
#define MAX6620_CFG_POR BIT(6)
#define MAX6620_CFG_TIMEOUT BIT(5)
#define MAX6620_CFG_FULLFAN BIT(4)
#define MAX6620_CFG_OSC BIT(3)
#define MAX6620_CFG_WD_MASK (BIT(2) | BIT(1))
#define MAX6620_CFG_WD_2 BIT(1)
#define MAX6620_CFG_WD_6 BIT(2)
#define MAX6620_CFG_WD10 (BIT(2) | BIT(1))
#define MAX6620_CFG_WD BIT(0)
/*
* Failure status register bits
*/
#define MAX6620_FAIL_TACH0 BIT(4)
#define MAX6620_FAIL_TACH1 BIT(5)
#define MAX6620_FAIL_TACH2 BIT(6)
#define MAX6620_FAIL_TACH3 BIT(7)
#define MAX6620_FAIL_MASK0 BIT(0)
#define MAX6620_FAIL_MASK1 BIT(1)
#define MAX6620_FAIL_MASK2 BIT(2)
#define MAX6620_FAIL_MASK3 BIT(3)
#define MAX6620_CLOCK_FREQ 8192 /* Clock frequency in Hz */
#define MAX6620_PULSE_PER_REV 2 /* Tachometer pulses per revolution */
/* Minimum and maximum values of the FAN-RPM */
#define FAN_RPM_MIN 240
#define FAN_RPM_MAX 30000
static const u8 config_reg[] = {
MAX6620_REG_CONF_FAN0,
MAX6620_REG_CONF_FAN1,
MAX6620_REG_CONF_FAN2,
MAX6620_REG_CONF_FAN3,
};
static const u8 dyn_reg[] = {
MAX6620_REG_DYN_FAN0,
MAX6620_REG_DYN_FAN1,
MAX6620_REG_DYN_FAN2,
MAX6620_REG_DYN_FAN3,
};
static const u8 tach_reg[] = {
MAX6620_REG_TACH0,
MAX6620_REG_TACH1,
MAX6620_REG_TACH2,
MAX6620_REG_TACH3,
};
static const u8 target_reg[] = {
MAX6620_REG_TAR0,
MAX6620_REG_TAR1,
MAX6620_REG_TAR2,
MAX6620_REG_TAR3,
};
/*
* Client data (each client gets its own)
*/
struct max6620_data {
struct i2c_client *client;
struct mutex update_lock;
bool valid; /* false until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* register values */
u8 fancfg[4];
u8 fandyn[4];
u8 fault;
u16 tach[4];
u16 target[4];
};
static u8 max6620_fan_div_from_reg(u8 val)
{
return BIT((val & 0xE0) >> 5);
}
static u16 max6620_fan_rpm_to_tach(u8 div, int rpm)
{
return (60 * div * MAX6620_CLOCK_FREQ) / (rpm * MAX6620_PULSE_PER_REV);
}
static int max6620_fan_tach_to_rpm(u8 div, u16 tach)
{
return (60 * div * MAX6620_CLOCK_FREQ) / (tach * MAX6620_PULSE_PER_REV);
}
static int max6620_update_device(struct device *dev)
{
struct max6620_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int i;
int ret = 0;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
for (i = 0; i < 4; i++) {
ret = i2c_smbus_read_byte_data(client, config_reg[i]);
if (ret < 0)
goto error;
data->fancfg[i] = ret;
ret = i2c_smbus_read_byte_data(client, dyn_reg[i]);
if (ret < 0)
goto error;
data->fandyn[i] = ret;
ret = i2c_smbus_read_byte_data(client, tach_reg[i]);
if (ret < 0)
goto error;
data->tach[i] = (ret << 3) & 0x7f8;
ret = i2c_smbus_read_byte_data(client, tach_reg[i] + 1);
if (ret < 0)
goto error;
data->tach[i] |= (ret >> 5) & 0x7;
ret = i2c_smbus_read_byte_data(client, target_reg[i]);
if (ret < 0)
goto error;
data->target[i] = (ret << 3) & 0x7f8;
ret = i2c_smbus_read_byte_data(client, target_reg[i] + 1);
if (ret < 0)
goto error;
data->target[i] |= (ret >> 5) & 0x7;
}
/*
* Alarms are cleared on read in case the condition that
* caused the alarm is removed. Keep the value latched here
* for providing the register through different alarm files.
*/
ret = i2c_smbus_read_byte_data(client, MAX6620_REG_FAULT);
if (ret < 0)
goto error;
data->fault |= (ret >> 4) & (ret & 0x0F);
data->last_updated = jiffies;
data->valid = true;
}
error:
mutex_unlock(&data->update_lock);
return ret;
}
static umode_t
max6620_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
int channel)
{
switch (type) {
case hwmon_fan:
switch (attr) {
case hwmon_fan_alarm:
case hwmon_fan_input:
return 0444;
case hwmon_fan_div:
case hwmon_fan_target:
return 0644;
default:
break;
}
break;
default:
break;
}
return 0;
}
static int
max6620_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, long *val)
{
struct max6620_data *data;
struct i2c_client *client;
int ret;
u8 div;
u8 val1;
u8 val2;
ret = max6620_update_device(dev);
if (ret < 0)
return ret;
data = dev_get_drvdata(dev);
client = data->client;
switch (type) {
case hwmon_fan:
switch (attr) {
case hwmon_fan_alarm:
mutex_lock(&data->update_lock);
*val = !!(data->fault & BIT(channel));
/* Setting TACH count to re-enable fan fault detection */
if (*val == 1) {
val1 = (data->target[channel] >> 3) & 0xff;
val2 = (data->target[channel] << 5) & 0xe0;
ret = i2c_smbus_write_byte_data(client,
target_reg[channel], val1);
if (ret < 0) {
mutex_unlock(&data->update_lock);
return ret;
}
ret = i2c_smbus_write_byte_data(client,
target_reg[channel] + 1, val2);
if (ret < 0) {
mutex_unlock(&data->update_lock);
return ret;
}
data->fault &= ~BIT(channel);
}
mutex_unlock(&data->update_lock);
break;
case hwmon_fan_div:
*val = max6620_fan_div_from_reg(data->fandyn[channel]);
break;
case hwmon_fan_input:
if (data->tach[channel] == 0) {
*val = 0;
} else {
div = max6620_fan_div_from_reg(data->fandyn[channel]);
*val = max6620_fan_tach_to_rpm(div, data->tach[channel]);
}
break;
case hwmon_fan_target:
if (data->target[channel] == 0) {
*val = 0;
} else {
div = max6620_fan_div_from_reg(data->fandyn[channel]);
*val = max6620_fan_tach_to_rpm(div, data->target[channel]);
}
break;
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int
max6620_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, long val)
{
struct max6620_data *data;
struct i2c_client *client;
int ret;
u8 div;
u16 tach;
u8 val1;
u8 val2;
ret = max6620_update_device(dev);
if (ret < 0)
return ret;
data = dev_get_drvdata(dev);
client = data->client;
mutex_lock(&data->update_lock);
switch (type) {
case hwmon_fan:
switch (attr) {
case hwmon_fan_div:
switch (val) {
case 1:
div = 0;
break;
case 2:
div = 1;
break;
case 4:
div = 2;
break;
case 8:
div = 3;
break;
case 16:
div = 4;
break;
case 32:
div = 5;
break;
default:
ret = -EINVAL;
goto error;
}
data->fandyn[channel] &= 0x1F;
data->fandyn[channel] |= div << 5;
ret = i2c_smbus_write_byte_data(client, dyn_reg[channel],
data->fandyn[channel]);
break;
case hwmon_fan_target:
val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX);
div = max6620_fan_div_from_reg(data->fandyn[channel]);
tach = max6620_fan_rpm_to_tach(div, val);
val1 = (tach >> 3) & 0xff;
val2 = (tach << 5) & 0xe0;
ret = i2c_smbus_write_byte_data(client, target_reg[channel], val1);
if (ret < 0)
break;
ret = i2c_smbus_write_byte_data(client, target_reg[channel] + 1, val2);
if (ret < 0)
break;
/* Setting TACH count re-enables fan fault detection */
data->fault &= ~BIT(channel);
break;
default:
ret = -EOPNOTSUPP;
break;
}
break;
default:
ret = -EOPNOTSUPP;
break;
}
error:
mutex_unlock(&data->update_lock);
return ret;
}
static const struct hwmon_channel_info *max6620_info[] = {
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM),
NULL
};
static const struct hwmon_ops max6620_hwmon_ops = {
.read = max6620_read,
.write = max6620_write,
.is_visible = max6620_is_visible,
};
static const struct hwmon_chip_info max6620_chip_info = {
.ops = &max6620_hwmon_ops,
.info = max6620_info,
};
static int max6620_init_client(struct max6620_data *data)
{
struct i2c_client *client = data->client;
int config;
int err;
int i;
int reg;
config = i2c_smbus_read_byte_data(client, MAX6620_REG_CONFIG);
if (config < 0) {
dev_err(&client->dev, "Error reading config, aborting.\n");
return config;
}
/*
* Set bit 4, disable other fans from going full speed on a fail
* failure.
*/
err = i2c_smbus_write_byte_data(client, MAX6620_REG_CONFIG, config | 0x10);
if (err < 0) {
dev_err(&client->dev, "Config write error, aborting.\n");
return err;
}
for (i = 0; i < 4; i++) {
reg = i2c_smbus_read_byte_data(client, config_reg[i]);
if (reg < 0)
return reg;
data->fancfg[i] = reg;
/* Enable RPM mode */
data->fancfg[i] |= 0xa8;
err = i2c_smbus_write_byte_data(client, config_reg[i], data->fancfg[i]);
if (err < 0)
return err;
/* 2 counts (001) and Rate change 100 (0.125 secs) */
data->fandyn[i] = 0x30;
err = i2c_smbus_write_byte_data(client, dyn_reg[i], data->fandyn[i]);
if (err < 0)
return err;
}
return 0;
}
static int max6620_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct max6620_data *data;
struct device *hwmon_dev;
int err;
data = devm_kzalloc(dev, sizeof(struct max6620_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
mutex_init(&data->update_lock);
err = max6620_init_client(data);
if (err)
return err;
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data,
&max6620_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id max6620_id[] = {
{ "max6620", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6620_id);
static struct i2c_driver max6620_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "max6620",
},
.probe_new = max6620_probe,
.id_table = max6620_id,
};
module_i2c_driver(max6620_driver);
MODULE_AUTHOR("Lucas Grunenberg");
MODULE_DESCRIPTION("MAX6620 sensor driver");
MODULE_LICENSE("GPL");