arm64: dts: rockchip: Add Powkiddy X55
Add support for the Powkiddy X55. The Powkiddy X55 is a handheld gaming device with a 720p 5.5 inch screen powered by the Rockchip RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC joysticks powered by 4 dedicated ADC channels, and several GPIO face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an 8GB internal eMMC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20231204185719.569021-11-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Chris Morgan
Heiko Stuebner
parent
18f413c5dc
commit
e99adc97e2
@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
||||
|
||||
926
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
Normal file
926
arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
Normal file
@ -0,0 +1,926 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Powkiddy x55";
|
||||
compatible = "powkiddy,x55", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc2;
|
||||
mmc3 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc_joystick: adc-joystick {
|
||||
compatible = "adc-joystick";
|
||||
io-channels = <&saradc 0>, <&saradc 1>,
|
||||
<&saradc 2>, <&saradc 3>;
|
||||
poll-interval = <60>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
axis@0 {
|
||||
reg = <0>;
|
||||
abs-flat = <30>;
|
||||
abs-fuzz = <20>;
|
||||
abs-range = <15 1023>;
|
||||
linux,code = <ABS_X>;
|
||||
};
|
||||
|
||||
axis@1 {
|
||||
reg = <1>;
|
||||
abs-flat = <30>;
|
||||
abs-fuzz = <20>;
|
||||
abs-range = <1023 15>;
|
||||
linux,code = <ABS_Y>;
|
||||
};
|
||||
|
||||
axis@2 {
|
||||
reg = <2>;
|
||||
abs-flat = <30>;
|
||||
abs-fuzz = <20>;
|
||||
abs-range = <15 1023>;
|
||||
linux,code = <ABS_RX>;
|
||||
};
|
||||
|
||||
axis@3 {
|
||||
reg = <3>;
|
||||
abs-flat = <30>;
|
||||
abs-fuzz = <20>;
|
||||
abs-range = <1023 15>;
|
||||
linux,code = <ABS_RY>;
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc_sys>;
|
||||
pwms = <&pwm4 0 25000 0>;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <4000000>;
|
||||
charge-term-current-microamp = <300000>;
|
||||
constant-charge-current-max-microamp = <2000000>;
|
||||
constant-charge-voltage-max-microvolt = <4300000>;
|
||||
factory-internal-resistance-micro-ohms = <91000>;
|
||||
voltage-max-design-microvolt = <4138000>;
|
||||
voltage-min-design-microvolt = <3400000>;
|
||||
|
||||
ocv-capacity-celsius = <20>;
|
||||
ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
|
||||
<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
|
||||
<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
|
||||
<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
|
||||
<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
|
||||
<3400000 0>;
|
||||
};
|
||||
|
||||
gpio_keys_control: gpio-keys-control {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&btn_pins_ctrl>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button-a {
|
||||
gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
label = "EAST";
|
||||
linux,code = <BTN_EAST>;
|
||||
};
|
||||
|
||||
button-b {
|
||||
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
|
||||
label = "SOUTH";
|
||||
linux,code = <BTN_SOUTH>;
|
||||
};
|
||||
|
||||
button-down {
|
||||
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-DOWN";
|
||||
linux,code = <BTN_DPAD_DOWN>;
|
||||
};
|
||||
|
||||
button-l1 {
|
||||
gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
|
||||
label = "TL";
|
||||
linux,code = <BTN_TL>;
|
||||
};
|
||||
|
||||
button-l2 {
|
||||
gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
|
||||
label = "TL2";
|
||||
linux,code = <BTN_TL2>;
|
||||
};
|
||||
|
||||
button-left {
|
||||
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-LEFT";
|
||||
linux,code = <BTN_DPAD_LEFT>;
|
||||
};
|
||||
|
||||
button-right {
|
||||
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-RIGHT";
|
||||
linux,code = <BTN_DPAD_RIGHT>;
|
||||
};
|
||||
|
||||
button-select {
|
||||
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
label = "SELECT";
|
||||
linux,code = <BTN_SELECT>;
|
||||
};
|
||||
|
||||
button-start {
|
||||
gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
label = "START";
|
||||
linux,code = <BTN_START>;
|
||||
};
|
||||
|
||||
button-thumbl {
|
||||
gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
label = "THUMBL";
|
||||
linux,code = <BTN_THUMBL>;
|
||||
};
|
||||
|
||||
button-thumbr {
|
||||
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
label = "THUMBR";
|
||||
linux,code = <BTN_THUMBR>;
|
||||
};
|
||||
|
||||
button-r1 {
|
||||
gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
label = "TR";
|
||||
linux,code = <BTN_TR>;
|
||||
};
|
||||
|
||||
button-r2 {
|
||||
gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
label = "TR2";
|
||||
linux,code = <BTN_TR2>;
|
||||
};
|
||||
|
||||
button-up {
|
||||
gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "DPAD-UP";
|
||||
linux,code = <BTN_DPAD_UP>;
|
||||
};
|
||||
|
||||
button-x {
|
||||
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
label = "NORTH";
|
||||
linux,code = <BTN_NORTH>;
|
||||
};
|
||||
|
||||
button-y {
|
||||
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
label = "WEST";
|
||||
linux,code = <BTN_WEST>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys_vol: gpio-keys-vol {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-0 = <&btn_pins_vol>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button-voldown {
|
||||
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
label = "VOLUMEDOWN";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
button-volup {
|
||||
gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "VOLUMEUP";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
red_led: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
green_led: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
};
|
||||
|
||||
amber_led: led-2 {
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
type = "c";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk817 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* Channels reversed for both headphones and speakers. */
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
pinctrl-names = "default";
|
||||
simple-audio-card,name = "rk817_ext";
|
||||
simple-audio-card,aux-devs = <&spk_amp>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Internal Speakers";
|
||||
simple-audio-card,routing =
|
||||
"MICL", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"Internal Speakers", "Speaker Amp OUTL",
|
||||
"Internal Speakers", "Speaker Amp OUTR",
|
||||
"Speaker Amp INL", "HPOL",
|
||||
"Speaker Amp INR", "HPOR";
|
||||
simple-audio-card,pin-switches = "Internal Speakers";
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk817>;
|
||||
};
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
};
|
||||
|
||||
spk_amp: audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&spk_amp_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vcc5v0_host";
|
||||
vin-supply = <&dcdc_boost>;
|
||||
};
|
||||
|
||||
vcc_lcd: regulator-vcc-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc_lcd_en>;
|
||||
pinctrl-names = "default";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_lcd";
|
||||
};
|
||||
|
||||
vcc_sys: regulator-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
regulator-name = "vcc_sys";
|
||||
};
|
||||
|
||||
vcc_wifi: regulator-vcc-wifi {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&vcc_wifi_h>;
|
||||
pinctrl-names = "default";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_wifi";
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cru {
|
||||
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
|
||||
<&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
|
||||
assigned-clock-rates = <32768>, <1200000000>,
|
||||
<200000000>, <126400000>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&dsi_dphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ports {
|
||||
dsi0_in: port@0 {
|
||||
reg = <0>;
|
||||
dsi0_in_vp1: endpoint {
|
||||
remote-endpoint = <&vp1_out_dsi0>;
|
||||
};
|
||||
};
|
||||
|
||||
dsi0_out: port@1 {
|
||||
reg = <1>;
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
panel: panel@0 {
|
||||
compatible = "powkiddy,x55-panel", "himax,hx8394";
|
||||
reg = <0>;
|
||||
backlight = <&backlight>;
|
||||
iovcc-supply = <&vcc_lcd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_rst>;
|
||||
reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
rotation = <270>;
|
||||
vcc-supply = <&vcc_lcd>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c5>;
|
||||
pinctrl-0 = <&hdmitxm0_cec>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk817: pmic@20 {
|
||||
compatible = "rockchip,rk817";
|
||||
reg = <0x20>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
clock-names = "mclk";
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc5-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&dcdc_boost>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc2v8_dvp: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
dcdc_boost: BOOST {
|
||||
regulator-min-microvolt = <4700000>;
|
||||
regulator-max-microvolt = <5400000>;
|
||||
regulator-name = "boost";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
otg_switch: OTG_SWITCH {
|
||||
regulator-name = "otg_switch";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rk817_charger: charger {
|
||||
monitored-battery = <&battery>;
|
||||
rockchip,resistor-sense-micro-ohms = <10000>;
|
||||
rockchip,sleep-enter-current-microamp = <150000>;
|
||||
rockchip,sleep-filter-current-microamp = <100000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m1_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
|
||||
<&i2s1m0_sdo0>;
|
||||
pinctrl-names = "default";
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
audio-amplifier {
|
||||
spk_amp_enable_h: spk-amp-enable-h {
|
||||
rockchip,pins =
|
||||
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-control {
|
||||
btn_pins_ctrl: btn-pins-ctrl {
|
||||
rockchip,pins =
|
||||
<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
btn_pins_vol: btn-pins-vol {
|
||||
rockchip,pins =
|
||||
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
|
||||
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-lcd {
|
||||
lcd_rst: lcd-rst {
|
||||
rockchip,pins =
|
||||
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
led_pins: led-pins {
|
||||
rockchip,pins =
|
||||
<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
hp-detect {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins =
|
||||
<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins =
|
||||
<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc-lcd {
|
||||
vcc_lcd_en: vcc-lcd-en {
|
||||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc-wifi {
|
||||
vcc_wifi_h: vcc-wifi-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcca1v8_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcca1v8_pmu>;
|
||||
vccio5-supply = <&vcc2v8_dvp>;
|
||||
vccio6-supply = <&vcc1v8_dvp>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
|
||||
<&emmc_datastrobe>, <&emmc_rstnout>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
|
||||
<&sdmmc0_det>;
|
||||
pinctrl-names = "default";
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
|
||||
pinctrl-names = "default";
|
||||
vmmc-supply = <&vcc_wifi>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
|
||||
<&sdmmc2m1_det>;
|
||||
pinctrl-names = "default";
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vcc2v8_dvp>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
|
||||
device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
phys = <&usb2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&vp1 {
|
||||
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
|
||||
remote-endpoint = <&dsi0_in_vp1>;
|
||||
};
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user