From e9ff6cdad87343447bf1a103068d91c0502e4629 Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Tue, 21 Nov 2023 13:50:25 +0100 Subject: [PATCH] arm64: dts: mediatek: mt8183: Change iospaces for thermal and svs The SVS iospace starts at 0x1100bc00 and not at 0x1100b000 as the latter is the thermal sensor iospace instead. Change the iospaces for both as following: - Thermal: 0x1100b000, length 0xc00 - SVS: 0x1100bc00, length 0x400 Please note that while this would be a breaking change for SVS (but not for thermal sensors), it doesn't matter because the svs driver never worked anyway because of the missing trips in tzts2, causing that thermal zone to never actually register, hence the SVS driver to fail probing anyway. Link: https://lore.kernel.org/r/20231121125044.78642-2-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 26 ++++++++++++------------ 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 41654530e165..980ff3e8c1c5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1183,22 +1183,10 @@ status = "disabled"; }; - svs: svs@1100b000 { - compatible = "mediatek,mt8183-svs"; - reg = <0 0x1100b000 0 0x1000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_THERM>; - clock-names = "main"; - nvmem-cells = <&svs_calibration>, - <&thermal_calibration>; - nvmem-cell-names = "svs-calibration-data", - "t-calibration-data"; - }; - thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; - reg = <0 0x1100b000 0 0x1000>; + reg = <0 0x1100b000 0 0xc00>; clocks = <&infracfg CLK_INFRA_THERM>, <&infracfg CLK_INFRA_AUXADC>; clock-names = "therm", "auxadc"; @@ -1210,6 +1198,18 @@ nvmem-cell-names = "calibration-data"; }; + svs: svs@1100bc00 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + thermal_zones: thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <100>;