Input updates for v6.8-rc2

- a fix for the fix to deal with newer laptops which get confused by the
   "GET ID" command when probing for PS/2 keyboards
 
 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops
 
 - a change to bcm5974 to validate that the device has appropriate
   endpoints
 
 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers
 
 - a quirk to Goodix controller to deal with extra GPIO described in ACPI
   tables on some devices.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZb1FdAAKCRBAj56VGEWX
 nHR/AQD9mGrzGWRHBx1GdtUdz54DwdcIomfufomNUPUOHj96TwD+OOzNL4AtpMEh
 YVddZKrt24OP2zE1yXRjujMahEBJHwk=
 =4yCm
 -----END PGP SIGNATURE-----

Merge tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a fix for the fix to deal with newer laptops which get confused by
   the "GET ID" command when probing for PS/2 keyboards

 - a couple of tweaks to i8042 to handle Clevo NS70PU and Lifebook U728
   laptops

 - a change to bcm5974 to validate that the device has appropriate
   endpoints

 - an addition of new product ID to xpad driver to recognize Lenovo
   Legion Go controllers

 - a quirk to Goodix controller to deal with extra GPIO described in
   ACPI tables on some devices.

* tag 'input-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
  Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
  Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
  Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
  Input: bcm5974 - check endpoint type before starting traffic
  Input: xpad - add Lenovo Legion Go controllers
  Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

drivers/input/joystick/xpad.c

@@ -294,6 +294,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -491,6 +492,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */

drivers/input/keyboard/atkbd.c

@@ -811,7 +811,6 @@ static int atkbd_probe(struct atkbd *atkbd)
 {
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[2];
-	bool skip_getid;
 
 /*
  * Some systems, where the bit-twiddling when testing the io-lines of the
@@ -825,6 +824,11 @@ static int atkbd_probe(struct atkbd *atkbd)
 				 "keyboard reset failed on %s\n",
 				 ps2dev->serio->phys);
 
+	if (atkbd_skip_getid(atkbd)) {
+		atkbd->id = 0xab83;
+		goto deactivate_kbd;
+	}
+
 /*
  * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
  * Some keyboards report different values, but the first byte is always 0xab or
@@ -833,18 +837,17 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
-	skip_getid = atkbd_skip_getid(atkbd);
-	if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+	if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
 
 /*
- * If the get ID command was skipped or failed, we check if we can at least set
+ * If the get ID command failed, we check if we can at least set
  * the LEDs on the keyboard. This should work on every keyboard out there.
  * It also turns the LEDs off, which we want anyway.
  */
 		param[0] = 0;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
 			return -1;
-		atkbd->id = skip_getid ? 0xab83 : 0xabba;
+		atkbd->id = 0xabba;
 		return 0;
 	}
 
@@ -860,6 +863,7 @@ static int atkbd_probe(struct atkbd *atkbd)
 		return -1;
 	}
 
+deactivate_kbd:
 /*
  * Make sure nothing is coming from the keyboard and disturbs our
  * internal state.

drivers/input/mouse/bcm5974.c

@@ -19,6 +19,7 @@
  * Copyright (C) 2006	   Nicolas Boichat (nicolas@boichat.ch)
  */
 
+#include "linux/usb.h"
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
@@ -193,6 +194,8 @@ enum tp_type {
 
 /* list of device capability bits */
 #define HAS_INTEGRATED_BUTTON	1
+/* maximum number of supported endpoints (currently trackpad and button) */
+#define MAX_ENDPOINTS	2
 
 /* trackpad finger data block size */
 #define FSIZE_TYPE1		(14 * sizeof(__le16))
@@ -891,6 +894,18 @@ static int bcm5974_resume(struct usb_interface *iface)
 	return error;
 }
 
+static bool bcm5974_check_endpoints(struct usb_interface *iface,
+				    const struct bcm5974_config *cfg)
+{
+	u8 ep_addr[MAX_ENDPOINTS + 1] = {0};
+
+	ep_addr[0] = cfg->tp_ep;
+	if (cfg->tp_type == TYPE1)
+		ep_addr[1] = cfg->bt_ep;
+
+	return usb_check_int_endpoints(iface, ep_addr);
+}
+
 static int bcm5974_probe(struct usb_interface *iface,
 			 const struct usb_device_id *id)
 {
@@ -903,6 +918,11 @@ static int bcm5974_probe(struct usb_interface *iface,
 	/* find the product index */
 	cfg = bcm5974_get_config(udev);
 
+	if (!bcm5974_check_endpoints(iface, cfg)) {
+		dev_err(&iface->dev, "Unexpected non-int endpoint\n");
+		return -ENODEV;
+	}
+
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
 	input_dev = input_allocate_device();

drivers/input/serio/i8042-acpipnpio.h

@@ -634,6 +634,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
 	},
+	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
@@ -1208,6 +1216,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
 					SERIO_QUIRK_NOPNP)
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),

drivers/input/touchscreen/goodix.c

@@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		}
 	}
 
-	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+	/* Some devices with gpio_int_idx 0 list a third unused GPIO */
+	if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {