iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

First round of IIO fixes for the 4.8 cycle.

Browse Source 
This is somewhat of a bumper set due to my unavailabilty earlier in the
 month.  The only slightly unusual ones are the dts updates for the
 rockchip adc reset.  The fix in the driver only makes sense with these
 and the rockchip maintainer is happy with them going through IIO to
 reach mainline.
 
 Core stuff
 
 * Fix an issue with a blocking op when !TASK_RUNNING. This been there
   a while and snuck in with seemingly minor additions to some core
   code paths.
 * Tools
   - generic_buffer failed to initialize the channel array pointer thus
     in the case of no channels blows up trying to free a random memory
     address.
 * sw-trigger:
   - Fix config group initialization when configfs is built as a module.
 
 Drivers
 
 * ad5933
   - Fix an incorrect overwrite of an error value.
 * ad799x
   - A missed assignment of the update_scan_mode callback means buffered mode
     doesn't work on the ad7991, ad7995 or ad7999.
 * ads1015
   - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
 * am2315
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
   - missing buffer selects in Kconfig
 * am335x adc
   - Protect fifo1 from concurrent access.
   - Increase timeout waiting for ADC to be long enough in all cases.
 * as3935
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
 * at91
   - Fix reading of channel 3.
 * atlas-ph-sensor
   - Typo means that the scale of electrical conductivity readings is way off.
 * bma220
   - Timestamps are reported, but never actually acquired from anywhere
     (so always 0)
   - Missing buffer selects in Kconfig
 * bmp280
   - pass the write pointer to PTR_ERR (i.e. the one that was just checked
     with IS_ERR).
   - suspend /resume crash due to wrong assumption about what dev_get_drvdata
     would return.
 * hdc100x
   - It superficially appeared that smbus_read_byte commands would allow
   reading of the outputs in two goes.  In reality it doesn't work, but
   instead returns the same for the upper and lower bytes (nice catch from
   Alison!)
 * kxsd9
   - Fix raw read return value to ensure it actually reports the value rather
   than a blank string.
 * max44000
   - Missing buffer selects in Kconfig
 * rockchip_saradc
   - Add use of reset controller to enforce a clean state of the ADC.
     Some bootloaders can leave it in an 'intersting' state and effectively
     frozen without this. A couple of associated dts updates.
 * stk8ba50
   - Missing buffer selects in Kconfig
 * stx104
   - Fix a possible race due to use of devm_iio_device_register when there
     was other stuff in the remove function.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIuBAABCAAYBQJXvJbQERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaIgQoP
 /05c7WzyhRxobrQGMIJShTA5/SMwrZa8Lc9z5rbjc7WEB0oPk+gw53ajWoEJYrj0
 oC5V2iYWhqsQOQ52OgD7jng85Z1LOXW2gWZW/rd4H27iCpBJqDQNjdOo8tbFjfDe
 oOVyhXvqmq8TPddAjX1gWJS9QC46rMAbTQpKtyJ75acttsRS+Hmn12ZdTiz6SDjm
 SGKgZM9RvhBephb33u75S4u8kkcsv3M+1dAOz4Uf1lSzTZq2wBdSoePwaPCb35sL
 9fbo8qTGUUa85rkwWmnGqnds0/v6ZNW0rcLaChb5YE8eQBQ+JCNDDF+p9HqQestj
 gzBHKOGampc/feNY4kB/aClzq/9fmS+eYPGUOiCM5Lv5Ck9lko/kUbequJbXgOoS
 87/BOTytNMmd5K4Sagm92vOl0piXSZAzhxiq2njaipIeqo0nfdNSrpWn91pEKWag
 sjcoPKhHukxXXJutaWRXNey1pGGJjflkFC9T6RJUVBS4/IuBvRCTQGvxVidzsgrT
 2bZ3ZIzz/nFjQ0dub+YEtN2t+tESKZDBuFgyYefULIpUKTmoSgrq0R8Pa8XZLNxq
 BpHbHQuJjL/hcFz6h8wgv16IFhjK3qT71VcGF78XQDyQhHXdwHAr/ioZ5M6kIgU4
 tRzBe0+wQsVqAr0cryptlWXsMskDzC9prRf5viYYiNuu
 =Hra7
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus

Jonathan writes:

First round of IIO fixes for the 4.8 cycle.

This is somewhat of a bumper set due to my unavailabilty earlier in the
month.  The only slightly unusual ones are the dts updates for the
rockchip adc reset.  The fix in the driver only makes sense with these
and the rockchip maintainer is happy with them going through IIO to
reach mainline.

Core stuff

* Fix an issue with a blocking op when !TASK_RUNNING. This been there
  a while and snuck in with seemingly minor additions to some core
  code paths.
* Tools
  - generic_buffer failed to initialize the channel array pointer thus
    in the case of no channels blows up trying to free a random memory
    address.
* sw-trigger:
  - Fix config group initialization when configfs is built as a module.

Drivers

* ad5933
  - Fix an incorrect overwrite of an error value.
* ad799x
  - A missed assignment of the update_scan_mode callback means buffered mode
    doesn't work on the ad7991, ad7995 or ad7999.
* ads1015
  - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
* am2315
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
  - missing buffer selects in Kconfig
* am335x adc
  - Protect fifo1 from concurrent access.
  - Increase timeout waiting for ADC to be long enough in all cases.
* as3935
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
* at91
  - Fix reading of channel 3.
* atlas-ph-sensor
  - Typo means that the scale of electrical conductivity readings is way off.
* bma220
  - Timestamps are reported, but never actually acquired from anywhere
    (so always 0)
  - Missing buffer selects in Kconfig
* bmp280
  - pass the write pointer to PTR_ERR (i.e. the one that was just checked
    with IS_ERR).
  - suspend /resume crash due to wrong assumption about what dev_get_drvdata
    would return.
* hdc100x
  - It superficially appeared that smbus_read_byte commands would allow
  reading of the outputs in two goes.  In reality it doesn't work, but
  instead returns the same for the upper and lower bytes (nice catch from
  Alison!)
* kxsd9
  - Fix raw read return value to ensure it actually reports the value rather
  than a blank string.
* max44000
  - Missing buffer selects in Kconfig
* rockchip_saradc
  - Add use of reset controller to enforce a clean state of the ADC.
    Some bootloaders can leave it in an 'intersting' state and effectively
    frozen without this. A couple of associated dts updates.
* stk8ba50
  - Missing buffer selects in Kconfig
* stx104
  - Fix a possible race due to use of devm_iio_device_register when there
    was other stuff in the remove function.
This commit is contained in:
Greg Kroah-Hartman 2016-08-23 17:39:31 -04:00
commit eafe5cfe71
27 changed files with 141 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
View File

@ -16,6 +16,11 @@ Required properties:
- vref-supply: The regulator supply ADC reference voltage.
- #io-channel-cells: Should be 1, see ../iio-bindings.txt
Optional properties:
- resets: Must contain an entry for each entry in reset-names if need support
this option. See ../reset/reset.txt for details.
- reset-names: Must include the name "saradc-apb".
Example:
saradc: saradc@2006c000 {
compatible = "rockchip,saradc";
@ -23,6 +28,8 @@ Example:
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
#io-channel-cells = <1>;
vref-supply = <&vcc18>;
};

2
arch/arm/boot/dts/rk3066a.dtsi
View File

@ -197,6 +197,8 @@
clock-names = "saradc", "apb_pclk";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

2
arch/arm/boot/dts/rk3288.dtsi
View File

@ -279,6 +279,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

2
arch/arm/boot/dts/rk3xxx.dtsi
View File

@ -399,6 +399,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

2
arch/arm64/boot/dts/rockchip/rk3368.dtsi
View File

@ -270,6 +270,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

5
drivers/iio/accel/Kconfig
View File

@ -20,6 +20,8 @@ config BMA180
config BMA220
tristate "Bosch BMA220 3-Axis Accelerometer Driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to add support for the Bosch BMA220 triaxial
acceleration sensor.
@ -234,7 +236,8 @@ config STK8312
config STK8BA50
tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
depends on I2C
depends on IIO_TRIGGER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8BA50 3-axis
accelerometer.

2
drivers/iio/accel/bma220_spi.c
View File

@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi)
if (ret < 0)
return ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
bma220_trigger_handler, NULL);
if (ret < 0) {
dev_err(&spi->dev, "iio triggered buffer setup failed\n");

1
drivers/iio/accel/kxsd9.c
View File

@ -160,6 +160,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
if (ret < 0)
goto error_ret;
*val = ret;
ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));

1
drivers/iio/adc/Kconfig
View File

@ -389,6 +389,7 @@ config QCOM_SPMI_VADC
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
depends on RESET_CONTROLLER
help
Say yes here to build support for the SARADC found in SoCs from
Rockchip.

1
drivers/iio/adc/ad799x.c
View File

@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = {
static const struct iio_info ad7991_info = {
.read_raw = &ad799x_read_raw,
.driver_module = THIS_MODULE,
.update_scan_mode = ad799x_update_scan_mode,
};
static const struct iio_info ad7993_4_7_8_noirq_info = {

4
drivers/iio/adc/at91_adc.c
View File

@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
st->ts_bufferedmeasure = false;
input_report_key(st->ts_input, BTN_TOUCH, 0);
input_sync(st->ts_input);
} else if (status & AT91_ADC_EOC(3)) {
/* Conversion finished */
} else if (status & AT91_ADC_EOC(3) && st->ts_input) {
/* Conversion finished and we've a touchscreen */
if (st->ts_bufferedmeasure) {
/*
* Last measurement is always discarded, since it can

30
drivers/iio/adc/rockchip_saradc.c
View File

@ -21,6 +21,8 @@
#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/reset.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
@ -53,6 +55,7 @@ struct rockchip_saradc {
struct clk *clk;
struct completion completion;
struct regulator *vref;
struct reset_control *reset;
const struct rockchip_saradc_data *data;
u16 last_val;
};
@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
};
MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
/**
* Reset SARADC Controller.
*/
static void rockchip_saradc_reset_controller(struct reset_control *reset)
{
reset_control_assert(reset);
usleep_range(10, 20);
reset_control_deassert(reset);
}
static int rockchip_saradc_probe(struct platform_device *pdev)
{
struct rockchip_saradc *info = NULL;
@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
/*
* The reset should be an optional property, as it should work
* with old devicetrees as well
*/
info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
if (IS_ERR(info->reset)) {
ret = PTR_ERR(info->reset);
if (ret != -ENOENT)
return ret;
dev_dbg(&pdev->dev, "no reset control found\n");
info->reset = NULL;
}
init_completion(&info->completion);
irq = platform_get_irq(pdev, 0);
@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
return PTR_ERR(info->vref);
}
if (info->reset)
rockchip_saradc_reset_controller(info->reset);
/*
* Use a default value for the converter clock.
* This may become user-configurable in the future.

3
drivers/iio/adc/ti-ads1015.c
View File

@ -489,7 +489,8 @@ static struct iio_info ads1115_info = {
#ifdef CONFIG_OF
static int ads1015_get_channels_config_of(struct i2c_client *client)
{
struct ads1015_data *data = i2c_get_clientdata(client);
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct ads1015_data *data = iio_priv(indio_dev);
struct device_node *node;
if (!client->dev.of_node ||

16
drivers/iio/adc/ti_am335x_adc.c
View File

@ -32,6 +32,7 @@
struct tiadc_device {
struct ti_tscadc_dev *mfd_tscadc;
struct mutex fifo1_lock; /* to protect fifo access */
int channels;
u8 channel_line[8];
u8 channel_step[8];
@ -359,6 +360,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
int ret = IIO_VAL_INT;
int i, map_val;
unsigned int fifo1count, read, stepid;
bool found = false;
@ -372,13 +374,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
if (!step_en)
return -EINVAL;
mutex_lock(&adc_dev->fifo1_lock);
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
while (fifo1count--)
tiadc_readl(adc_dev, REG_FIFO1);
am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
timeout = jiffies + usecs_to_jiffies
timeout = jiffies + msecs_to_jiffies
(IDLE_TIMEOUT * adc_dev->channels);
/* Wait for Fifo threshold interrupt */
while (1) {
@ -388,7 +391,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
if (time_after(jiffies, timeout)) {
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
return -EAGAIN;
ret = -EAGAIN;
goto err_unlock;
}
}
map_val = adc_dev->channel_step[chan->scan_index];
@ -414,8 +418,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
if (found == false)
return -EBUSY;
return IIO_VAL_INT;
ret = -EBUSY;
err_unlock:
mutex_unlock(&adc_dev->fifo1_lock);
return ret;
}
static const struct iio_info tiadc_info = {
@ -483,6 +490,7 @@ static int tiadc_probe(struct platform_device *pdev)
tiadc_step_config(indio_dev);
tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
mutex_init(&adc_dev->fifo1_lock);
err = tiadc_channel_init(indio_dev, adc_dev->channels);
if (err < 0)

2
drivers/iio/chemical/atlas-ph-sensor.c
View File

@ -434,7 +434,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
break;
case IIO_ELECTRICALCONDUCTIVITY:
*val = 1; /* 0.00001 */
*val = 100000;
*val2 = 100000;
break;
case IIO_CONCENTRATION:
*val = 0; /* 0.000000001 */

38
drivers/iio/dac/stx104.c
View File

@ -65,6 +65,16 @@ struct stx104_gpio {
unsigned int out_state;
};
/**
* struct stx104_dev - STX104 device private data structure
* @indio_dev: IIO device
* @chip: instance of the gpio_chip
*/
struct stx104_dev {
struct iio_dev *indio_dev;
struct gpio_chip *chip;
};
static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
static int stx104_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
/* GPIO 0-3 are input only, while the rest are output only */
if (offset < 4)
return 1;
@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
struct iio_dev *indio_dev;
struct stx104_iio *priv;
struct stx104_gpio *stx104gpio;
struct stx104_dev *stx104dev;
int err;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id)
if (!stx104gpio)
return -ENOMEM;
stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL);
if (!stx104dev)
return -ENOMEM;
if (!devm_request_region(dev, base[id], STX104_EXTENT,
dev_name(dev))) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id)
outw(0, base[id] + 4);
outw(0, base[id] + 6);
err = devm_iio_device_register(dev, indio_dev);
if (err) {
dev_err(dev, "IIO device registering failed (%d)\n", err);
return err;
}
stx104gpio->chip.label = dev_name(dev);
stx104gpio->chip.parent = dev;
stx104gpio->chip.owner = THIS_MODULE;
@ -220,7 +230,9 @@ static int stx104_probe(struct device *dev, unsigned int id)
spin_lock_init(&stx104gpio->lock);
dev_set_drvdata(dev, stx104gpio);
stx104dev->indio_dev = indio_dev;
stx104dev->chip = &stx104gpio->chip;
dev_set_drvdata(dev, stx104dev);
err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
if (err) {
@ -228,14 +240,22 @@ static int stx104_probe(struct device *dev, unsigned int id)
return err;
}
err = iio_device_register(indio_dev);
if (err) {
dev_err(dev, "IIO device registering failed (%d)\n", err);
gpiochip_remove(&stx104gpio->chip);
return err;
}
return 0;
}
static int stx104_remove(struct device *dev, unsigned int id)
{
struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
struct stx104_dev *const stx104dev = dev_get_drvdata(dev);
gpiochip_remove(&stx104gpio->chip);
iio_device_unregister(stx104dev->indio_dev);
gpiochip_remove(stx104dev->chip);
return 0;
}

2
drivers/iio/humidity/Kconfig
View File

@ -6,6 +6,8 @@ menu "Humidity sensors"
config AM2315
tristate "Aosong AM2315 relative humidity and temperature sensor"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the Aosong AM2315
relative humidity and ambient temperature sensor.

2
drivers/iio/humidity/am2315.c
View File

@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client,
indio_dev->channels = am2315_channels;
indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
ret = iio_triggered_buffer_setup(indio_dev, NULL,
ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
am2315_trigger_handler, NULL);
if (ret < 0) {
dev_err(&client->dev, "iio triggered buffer setup failed\n");

27
drivers/iio/humidity/hdc100x.c
View File

@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
struct i2c_client *client = data->client;
int delay = data->adc_int_us[chan->address];
int ret;
int val;
__be16 val;
/* start measurement */
ret = i2c_smbus_write_byte(client, chan->address);
@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
/* wait for integration time to pass */
usleep_range(delay, delay + 1000);
/*
* i2c_smbus_read_word_data cannot() be used here due to the command
* value not being understood and causes NAKs preventing any reading
* from being accessed.
*/
ret = i2c_smbus_read_byte(client);
/* read measurement */
ret = i2c_master_recv(data->client, (char *)&val, sizeof(val));
if (ret < 0) {
dev_err(&client->dev, "cannot read high byte measurement");
dev_err(&client->dev, "cannot read sensor data\n");
return ret;
}
val = ret << 8;
ret = i2c_smbus_read_byte(client);
if (ret < 0) {
dev_err(&client->dev, "cannot read low byte measurement");
return ret;
}
val |= ret;
return val;
return be16_to_cpu(val);
}
static int hdc100x_get_heater_status(struct hdc100x_data *data)
@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
struct hdc100x_data *data;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));

23
drivers/iio/industrialio-buffer.c
View File

@ -107,6 +107,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
{
struct iio_dev *indio_dev = filp->private_data;
struct iio_buffer *rb = indio_dev->buffer;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
size_t datum_size;
size_t to_wait;
int ret;
@ -131,19 +132,29 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
else
to_wait = min_t(size_t, n / datum_size, rb->watermark);
add_wait_queue(&rb->pollq, &wait);
do {
ret = wait_event_interruptible(rb->pollq,
iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size));
if (ret)
return ret;
if (!indio_dev->info) {
ret = -ENODEV;
break;
}
if (!indio_dev->info)
return -ENODEV;
if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) {
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
wait_woken(&wait, TASK_INTERRUPTIBLE,
MAX_SCHEDULE_TIMEOUT);
continue;
}
ret = rb->access->read_first_n(rb, n, buf);
if (ret == 0 && (filp->f_flags & O_NONBLOCK))
ret = -EAGAIN;
} while (ret == 0);
remove_wait_queue(&rb->pollq, &wait);
return ret;
}

2
drivers/iio/light/Kconfig
View File

@ -238,6 +238,8 @@ config MAX44000
tristate "MAX44000 Ambient and Infrared Proximity Sensor"
depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build support for Maxim Integrated's
MAX44000 ambient and infrared proximity sensor device.

8
drivers/iio/pressure/bmp280-core.c
View File

@ -970,7 +970,7 @@ int bmp280_common_probe(struct device *dev,
data->vdda = devm_regulator_get(dev, "vdda");
if (IS_ERR(data->vdda)) {
dev_err(dev, "failed to get VDDA regulator\n");
ret = PTR_ERR(data->vddd);
ret = PTR_ERR(data->vdda);
goto out_disable_vddd;
}
ret = regulator_enable(data->vdda);
@ -1079,7 +1079,8 @@ EXPORT_SYMBOL(bmp280_common_remove);
#ifdef CONFIG_PM
static int bmp280_runtime_suspend(struct device *dev)
{
struct bmp280_data *data = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmp280_data *data = iio_priv(indio_dev);
int ret;
ret = regulator_disable(data->vdda);
@ -1090,7 +1091,8 @@ static int bmp280_runtime_suspend(struct device *dev)
static int bmp280_runtime_resume(struct device *dev)
{
struct bmp280_data *data = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmp280_data *data = iio_priv(indio_dev);
int ret;
ret = regulator_enable(data->vddd);

2
drivers/iio/proximity/as3935.c
View File

@ -397,7 +397,7 @@ static int as3935_probe(struct spi_device *spi)
return ret;
}
ret = iio_triggered_buffer_setup(indio_dev, NULL,
ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
&as3935_trigger_handler, NULL);
if (ret) {

2
drivers/staging/iio/impedance-analyzer/ad5933.c
View File

@ -419,6 +419,7 @@ static ssize_t ad5933_store(struct device *dev,
mutex_lock(&indio_dev->mlock);
switch ((u32)this_attr->address) {
case AD5933_OUT_RANGE:
ret = -EINVAL;
for (i = 0; i < 4; i++)
if (val == st->range_avail[i]) {
st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
@ -426,7 +427,6 @@ static ssize_t ad5933_store(struct device *dev,
ret = ad5933_cmd(st, 0);
break;
}
ret = -EINVAL;
break;
case AD5933_IN_PGA_GAIN:
if (sysfs_streq(buf, "1")) {

2
include/linux/iio/sw_trigger.h
View File

@ -62,7 +62,7 @@ void iio_swt_group_init_type_name(struct iio_sw_trigger *t,
const char *name,
struct config_item_type *type)
{
#ifdef CONFIG_CONFIGFS_FS
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
config_group_init_type_name(&t->group, name, type);
#endif
}

8
include/linux/mfd/ti_am335x_tscadc.h
View File

@ -138,16 +138,16 @@
/*
* time in us for processing a single channel, calculated as follows:
*
* num cycles = open delay + (sample delay + conv time) * averaging
* max num cycles = open delay + (sample delay + conv time) * averaging
*
* num cycles: 152 + (1 + 13) * 16 = 376
* max num cycles: 262143 + (255 + 13) * 16 = 266431
*
* clock frequency: 26MHz / 8 = 3.25MHz
* clock period: 1 / 3.25MHz = 308ns
*
* processing time: 376 * 308ns = 116us
* max processing time: 266431 * 308ns = 83ms(approx)
*/
#define IDLE_TIMEOUT 116 /* microsec */
#define IDLE_TIMEOUT 83 /* milliseconds */
#define TSCADC_CELLS 2

2
tools/iio/iio_generic_buffer.c
View File

@ -348,7 +348,7 @@ int main(int argc, char **argv)
int notrigger = 0;
char *dummy;
struct iio_channel_info *channels;
struct iio_channel_info *channels = NULL;
register_cleanup();