iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: lx2160a-qds: Add mdio mux nodes

Browse Source 
The two external MDIO buses used to communicate with phy devices that
are external to SOC are muxed in LX2160AQDS board.  These buses can be
routed to any one of the eight IO slots on LX2160AQDS board depending on
value in fpga register 0x54.  Additionally the external MDIO1 is used to
communicate to the onboard RGMII phy devices.  The mdio1 is controlled
by bits 4-7 of fpga register and mdio2 is controlled by bits 4-7 of fpga
register.

Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Pankaj Bansal 2021-12-14 01:23:36 -06:00 committed by Shawn Guo
parent 519bace37b
commit eb70c4a3b1
1 changed files with 145 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

145
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
View File

@ -31,6 +31,130 @@
regulator-boot-on;
regulator-always-on;
};
mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
#address-cells=<1>;
#size-cells = <0>;
mdio@0 { /* On-board PHY #1 RGMI1*/
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@8 { /* On-board PHY #2 RGMI2*/
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@18 { /* Slot #1 */
reg = <0x18>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@19 { /* Slot #2 */
reg = <0x19>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1a { /* Slot #3 */
reg = <0x1a>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1b { /* Slot #4 */
reg = <0x1b>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1c { /* Slot #5 */
reg = <0x1c>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1d { /* Slot #6 */
reg = <0x1d>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1e { /* Slot #7 */
reg = <0x1e>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1f { /* Slot #8 */
reg = <0x1f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio-mux-2 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
#address-cells=<1>;
#size-cells = <0>;
mdio@0 { /* Slot #1 (secondary EMI) */
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1 { /* Slot #2 (secondary EMI) */
reg = <0x01>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@2 { /* Slot #3 (secondary EMI) */
reg = <0x02>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@3 { /* Slot #4 (secondary EMI) */
reg = <0x03>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@4 { /* Slot #5 (secondary EMI) */
reg = <0x04>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@5 { /* Slot #6 (secondary EMI) */
reg = <0x05>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@6 { /* Slot #7 (secondary EMI) */
reg = <0x06>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@7 { /* Slot #8 (secondary EMI) */
reg = <0x07>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&can0 {
@ -81,6 +205,14 @@
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&esdhc0 {
status = "okay";
};
@ -107,6 +239,19 @@
&i2c0 {
status = "okay";
fpga@66 {
compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
"simple-mfd";
reg = <0x66>;
mux: mux-controller {
compatible = "reg-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;