iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

bonding: make USES_PRIMARY inline functions

Browse Source 
Change the name a bit to better reflect its scope, and update some
comments. Two functions added - one which takes bond as a param and the
other which takes the mode.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Veaceslav Falico 2014-05-15 21:39:54 +02:00 committed by David S. Miller
parent 267bed777a
commit ec0865a949
4 changed files with 32 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
drivers/net/bonding/bond_main.c
View File

@ -497,7 +497,7 @@ static int bond_set_promiscuity(struct bonding *bond, int inc)
struct list_head *iter;
int err = 0;
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_promiscuity(bond->curr_active_slave->dev,
@ -523,7 +523,7 @@ static int bond_set_allmulti(struct bonding *bond, int inc)
struct list_head *iter;
int err = 0;
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
/* write lock already acquired */
if (bond->curr_active_slave) {
err = dev_set_allmulti(bond->curr_active_slave->dev,
@ -585,8 +585,8 @@ static void bond_hw_addr_flush(struct net_device *bond_dev,
/*--------------------------- Active slave change ---------------------------*/
/* Update the hardware address list and promisc/allmulti for the new and
* old active slaves (if any). Modes that are !USES_PRIMARY keep all
* slaves up date at all times; only the USES_PRIMARY modes need to call
* old active slaves (if any). Modes that are not using primary keep all
* slaves up date at all times; only the modes that use primary need to call
* this function to swap these settings during a failover.
*/
static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active,
@ -801,7 +801,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
new_active->last_link_up = jiffies;
if (new_active->link == BOND_LINK_BACK) {
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
pr_info("%s: making interface %s the new active one %d ms earlier\n",
bond->dev->name, new_active->dev->name,
(bond->params.updelay - new_active->delay) * bond->params.miimon);
@ -816,14 +816,14 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
if (bond_is_lb(bond))
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
pr_info("%s: making interface %s the new active one\n",
bond->dev->name, new_active->dev->name);
}
}
}
if (USES_PRIMARY(bond->params.mode))
if (bond_uses_primary(bond))
bond_hw_addr_swap(bond, new_active, old_active);
if (bond_is_lb(bond)) {
@ -876,7 +876,7 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
* resend only if bond is brought up with the affected
* bonding modes and the retransmission is enabled */
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
((USES_PRIMARY(bond->params.mode) && new_active) ||
((bond_uses_primary(bond) && new_active) ||
bond->params.mode == BOND_MODE_ROUNDROBIN)) {
bond->igmp_retrans = bond->params.resend_igmp;
queue_delayed_work(bond->wq, &bond->mcast_work, 1);
@ -1381,10 +1381,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
goto err_close;
}
/* If the mode USES_PRIMARY, then the following is handled by
/* If the mode uses primary, then the following is handled by
* bond_change_active_slave().
*/
if (!USES_PRIMARY(bond->params.mode)) {
if (!bond_uses_primary(bond)) {
/* set promiscuity level to new slave */
if (bond_dev->flags & IFF_PROMISC) {
res = dev_set_promiscuity(slave_dev, 1);
@ -1480,7 +1480,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
new_slave->link == BOND_LINK_DOWN ? "DOWN" :
(new_slave->link == BOND_LINK_UP ? "UP" : "BACK"));
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
if (bond_uses_primary(bond) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond->primary_slave = new_slave;
@ -1569,7 +1569,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
bond_compute_features(bond);
bond_set_carrier(bond);
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
block_netpoll_tx();
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
@ -1593,7 +1593,7 @@ err_unregister:
netdev_rx_handler_unregister(slave_dev);
err_detach:
if (!USES_PRIMARY(bond->params.mode))
if (!bond_uses_primary(bond))
bond_hw_addr_flush(bond_dev, slave_dev);
vlan_vids_del_by_dev(slave_dev, bond_dev);
@ -1778,10 +1778,10 @@ static int __bond_release_one(struct net_device *bond_dev,
/* must do this from outside any spinlocks */
vlan_vids_del_by_dev(slave_dev, bond_dev);
/* If the mode USES_PRIMARY, then this cases was handled above by
/* If the mode uses primary, then this cases was handled above by
* bond_change_active_slave(..., NULL)
*/
if (!USES_PRIMARY(bond->params.mode)) {
if (!bond_uses_primary(bond)) {
/* unset promiscuity level from slave
* NOTE: The NETDEV_CHANGEADDR call above may change the value
* of the IFF_PROMISC flag in the bond_dev, but we need the
@ -2915,7 +2915,7 @@ static int bond_slave_netdev_event(unsigned long event,
break;
case NETDEV_CHANGENAME:
/* we don't care if we don't have primary set */
if (!USES_PRIMARY(bond->params.mode) ||
if (!bond_uses_primary(bond) ||
!bond->params.primary[0])
break;
@ -3105,7 +3105,7 @@ static int bond_open(struct net_device *bond_dev)
if (bond_has_slaves(bond)) {
read_lock(&bond->curr_slave_lock);
bond_for_each_slave(bond, slave, iter) {
if (USES_PRIMARY(bond->params.mode)
if (bond_uses_primary(bond)
&& (slave != bond->curr_active_slave)) {
bond_set_slave_inactive_flags(slave,
BOND_SLAVE_NOTIFY_NOW);
@ -3343,7 +3343,7 @@ static void bond_set_rx_mode(struct net_device *bond_dev)
rcu_read_lock();
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
slave = rcu_dereference(bond->curr_active_slave);
if (slave) {
dev_uc_sync(slave->dev, bond_dev);
@ -4268,7 +4268,7 @@ static int bond_check_params(struct bond_params *params)
pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n");
}
if (primary && !USES_PRIMARY(bond_mode)) {
if (primary && !bond_mode_uses_primary(bond_mode)) {
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/

2
drivers/net/bonding/bond_options.c
View File

@ -693,7 +693,7 @@ int bond_option_mode_set(struct bonding *bond, const struct bond_opt_value *newv
static struct net_device *__bond_option_active_slave_get(struct bonding *bond,
struct slave *slave)
{
return USES_PRIMARY(bond->params.mode) && slave ? slave->dev : NULL;
return bond_uses_primary(bond) && slave ? slave->dev : NULL;
}
struct net_device *bond_option_active_slave_get_rcu(struct bonding *bond)

2
drivers/net/bonding/bond_procfs.c
View File

@ -91,7 +91,7 @@ static void bond_info_show_master(struct seq_file *seq)
optval->string, bond->params.xmit_policy);
}
if (USES_PRIMARY(bond->params.mode)) {
if (bond_uses_primary(bond)) {
seq_printf(seq, "Primary Slave: %s",
(bond->primary_slave) ?
bond->primary_slave->dev->name : "None");

17
drivers/net/bonding/bonding.h
View File

@ -54,12 +54,6 @@
((slave)->link == BOND_LINK_UP) && \
bond_is_active_slave(slave))
#define USES_PRIMARY(mode) \
(((mode) == BOND_MODE_ACTIVEBACKUP) || \
((mode) == BOND_MODE_TLB) || \
((mode) == BOND_MODE_ALB))
#define IS_IP_TARGET_UNUSABLE_ADDRESS(a) \
((htonl(INADDR_BROADCAST) == a) || \
ipv4_is_zeronet(a))
@ -293,6 +287,17 @@ static inline bool bond_mode_uses_arp(int mode)
mode != BOND_MODE_ALB;
}
static inline bool bond_mode_uses_primary(int mode)
{
return mode == BOND_MODE_ACTIVEBACKUP || mode == BOND_MODE_TLB ||
mode == BOND_MODE_ALB;
}
static inline bool bond_uses_primary(struct bonding *bond)
{
return bond_mode_uses_primary(bond->params.mode);
}
static inline void bond_set_active_slave(struct slave *slave)
{
if (slave->backup) {