dt-bindings: net: Convert ath10k to YAML
Convert the ath10k bindings to YAML. Dropped properties that are absent at the current state of mainline: - qcom,msi_addr - qcom,msi_base Somewhat based on the ath11k bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v4-1-9f67a6bb0d56@linaro.org
This commit is contained in:
Konrad Dybcio
Kalle Valo
parent
e04e4b6e01
commit
ed09c61eb1
@ -1,215 +0,0 @@
|
||||
* Qualcomm Atheros ath10k wireless devices
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be one of the following:
|
||||
* "qcom,ath10k"
|
||||
* "qcom,ipq4019-wifi"
|
||||
* "qcom,wcn3990-wifi"
|
||||
|
||||
PCI based devices uses compatible string "qcom,ath10k" and takes calibration
|
||||
data along with board specific data via "qcom,ath10k-calibration-data".
|
||||
Rest of the properties are not applicable for PCI based devices.
|
||||
|
||||
AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
|
||||
and also uses most of the properties defined in this doc (except
|
||||
"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
|
||||
to carry pre calibration data.
|
||||
|
||||
In general, entry "qcom,ath10k-pre-calibration-data" and
|
||||
"qcom,ath10k-calibration-data" conflict with each other and only one
|
||||
can be provided per device.
|
||||
|
||||
SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
|
||||
|
||||
- reg: Address and length of the register set for the device.
|
||||
- reg-names: Must include the list of following reg names,
|
||||
"membase"
|
||||
- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
|
||||
compatible target.
|
||||
reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
|
||||
compatible target.
|
||||
Must contain interrupt-names property per entry for
|
||||
"qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
|
||||
|
||||
- interrupt-names: Must include the entries for MSI interrupt
|
||||
names ("msi0" to "msi15") and legacy interrupt
|
||||
name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
|
||||
compatible targets.
|
||||
|
||||
Optional properties:
|
||||
- resets: Must contain an entry for each entry in reset-names.
|
||||
See ../reset/reseti.txt for details.
|
||||
- reset-names: Must include the list of following reset names,
|
||||
"wifi_cpu_init"
|
||||
"wifi_radio_srif"
|
||||
"wifi_radio_warm"
|
||||
"wifi_radio_cold"
|
||||
"wifi_core_warm"
|
||||
"wifi_core_cold"
|
||||
- clocks: List of clock specifiers, must contain an entry for each required
|
||||
entry in clock-names.
|
||||
- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
|
||||
"wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
|
||||
"cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
|
||||
compatible target.
|
||||
- qcom,msi_addr: MSI interrupt address.
|
||||
- qcom,msi_base: Base value to add before writing MSI data into
|
||||
MSI address register.
|
||||
- qcom,ath10k-calibration-variant: string to search for in the board-2.bin
|
||||
variant list with the same bus and device
|
||||
specific ids
|
||||
- qcom,ath10k-calibration-data : calibration data + board specific data
|
||||
as an array, the length can vary between
|
||||
hw versions.
|
||||
- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
|
||||
the length can vary between hw versions.
|
||||
- <supply-name>-supply: handle to the regulator device tree node
|
||||
optional "supply-name" are "vdd-0.8-cx-mx",
|
||||
"vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
|
||||
and "vdd-3.3-ch1".
|
||||
- memory-region:
|
||||
Usage: optional
|
||||
Value type: <phandle>
|
||||
Definition: reference to the reserved-memory for the msa region
|
||||
used by the wifi firmware running in Q6.
|
||||
- iommus:
|
||||
Usage: optional
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A list of phandle and IOMMU specifier pairs.
|
||||
- ext-fem-name:
|
||||
Usage: Optional
|
||||
Value type: string
|
||||
Definition: Name of external front end module used. Some valid FEM names
|
||||
for example: "microsemi-lx5586", "sky85703-11"
|
||||
and "sky85803" etc.
|
||||
- qcom,snoc-host-cap-8bit-quirk:
|
||||
Usage: Optional
|
||||
Value type: <empty>
|
||||
Definition: Quirk specifying that the firmware expects the 8bit version
|
||||
of the host capability QMI request
|
||||
- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
|
||||
|
||||
- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
|
||||
mapped msa region.
|
||||
|
||||
- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
|
||||
support by the hardware.
|
||||
- qcom,coexist-gpio-pin : gpio pin number information to support coex
|
||||
which will be used by wifi firmware.
|
||||
|
||||
* Subnodes
|
||||
The ath10k wifi node can contain one optional firmware subnode.
|
||||
Firmware subnode is needed when the platform does not have TustZone.
|
||||
The firmware subnode must have:
|
||||
|
||||
- iommus:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A list of phandle and IOMMU specifier pairs.
|
||||
|
||||
|
||||
Example (to supply PCI based wifi block details):
|
||||
|
||||
In this example, the node is defined as child node of the PCI controller.
|
||||
|
||||
pci {
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
|
||||
wifi@0,0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
|
||||
ext-fem-name = "microsemi-lx5586";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Example (to supply ipq4019 SoC wifi block details):
|
||||
|
||||
wifi0: wifi@a000000 {
|
||||
compatible = "qcom,ipq4019-wifi";
|
||||
reg = <0xa000000 0x200000>;
|
||||
resets = <&gcc WIFI0_CPU_INIT_RESET>,
|
||||
<&gcc WIFI0_RADIO_SRIF_RESET>,
|
||||
<&gcc WIFI0_RADIO_WARM_RESET>,
|
||||
<&gcc WIFI0_RADIO_COLD_RESET>,
|
||||
<&gcc WIFI0_CORE_WARM_RESET>,
|
||||
<&gcc WIFI0_CORE_COLD_RESET>;
|
||||
reset-names = "wifi_cpu_init",
|
||||
"wifi_radio_srif",
|
||||
"wifi_radio_warm",
|
||||
"wifi_radio_cold",
|
||||
"wifi_core_warm",
|
||||
"wifi_core_cold";
|
||||
clocks = <&gcc GCC_WCSS2G_CLK>,
|
||||
<&gcc GCC_WCSS2G_REF_CLK>,
|
||||
<&gcc GCC_WCSS2G_RTC_CLK>;
|
||||
clock-names = "wifi_wcss_cmd",
|
||||
"wifi_wcss_ref",
|
||||
"wifi_wcss_rtc";
|
||||
interrupts = <0 0x20 0x1>,
|
||||
<0 0x21 0x1>,
|
||||
<0 0x22 0x1>,
|
||||
<0 0x23 0x1>,
|
||||
<0 0x24 0x1>,
|
||||
<0 0x25 0x1>,
|
||||
<0 0x26 0x1>,
|
||||
<0 0x27 0x1>,
|
||||
<0 0x28 0x1>,
|
||||
<0 0x29 0x1>,
|
||||
<0 0x2a 0x1>,
|
||||
<0 0x2b 0x1>,
|
||||
<0 0x2c 0x1>,
|
||||
<0 0x2d 0x1>,
|
||||
<0 0x2e 0x1>,
|
||||
<0 0x2f 0x1>,
|
||||
<0 0xa8 0x0>;
|
||||
interrupt-names = "msi0", "msi1", "msi2", "msi3",
|
||||
"msi4", "msi5", "msi6", "msi7",
|
||||
"msi8", "msi9", "msi10", "msi11",
|
||||
"msi12", "msi13", "msi14", "msi15",
|
||||
"legacy";
|
||||
qcom,msi_addr = <0x0b006040>;
|
||||
qcom,msi_base = <0x40>;
|
||||
qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
|
||||
qcom,coexist-support = <1>;
|
||||
qcom,coexist-gpio-pin = <0x33>;
|
||||
};
|
||||
|
||||
Example (to supply wcn3990 SoC wifi block details):
|
||||
|
||||
wifi@18000000 {
|
||||
compatible = "qcom,wcn3990-wifi";
|
||||
reg = <0x18800000 0x800000>;
|
||||
reg-names = "membase";
|
||||
clocks = <&clock_gcc clk_rf_clk2_pin>;
|
||||
clock-names = "cxo_ref_clk_pin";
|
||||
interrupts =
|
||||
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
|
||||
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
|
||||
memory-region = <&wifi_msa_mem>;
|
||||
iommus = <&apps_smmu 0x0040 0x1>;
|
||||
qcom,msa-fixed-perm;
|
||||
wifi-firmware {
|
||||
iommus = <&apps_iommu 0xc22 0x1>;
|
||||
};
|
||||
};
|
||||
358
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
Normal file
358
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
Normal file
@ -0,0 +1,358 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies ath10k wireless devices
|
||||
|
||||
maintainers:
|
||||
- Kalle Valo <kvalo@kernel.org>
|
||||
|
||||
description:
|
||||
Qualcomm Technologies, Inc. IEEE 802.11ac devices.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,ath10k # SDIO-based devices
|
||||
- qcom,ipq4019-wifi
|
||||
- qcom,wcn3990-wifi # SNoC-based devices
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: membase
|
||||
|
||||
interrupts:
|
||||
minItems: 12
|
||||
maxItems: 17
|
||||
|
||||
interrupt-names:
|
||||
minItems: 12
|
||||
maxItems: 17
|
||||
|
||||
memory-region:
|
||||
maxItems: 1
|
||||
description:
|
||||
Reference to the MSA memory region used by the Wi-Fi firmware
|
||||
running on the Q6 core.
|
||||
|
||||
iommus:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
resets:
|
||||
maxItems: 6
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
- const: wifi_cpu_init
|
||||
- const: wifi_radio_srif
|
||||
- const: wifi_radio_warm
|
||||
- const: wifi_radio_cold
|
||||
- const: wifi_core_warm
|
||||
- const: wifi_core_cold
|
||||
|
||||
ext-fem-name:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description: Name of external front end module used.
|
||||
enum:
|
||||
- microsemi-lx5586
|
||||
- sky85703-11
|
||||
- sky85803
|
||||
|
||||
wifi-firmware:
|
||||
type: object
|
||||
additionalProperties: false
|
||||
description: |
|
||||
The ath10k Wi-Fi node can contain one optional firmware subnode.
|
||||
Firmware subnode is needed when the platform does not have Trustzone.
|
||||
properties:
|
||||
iommus:
|
||||
maxItems: 1
|
||||
required:
|
||||
- iommus
|
||||
|
||||
qcom,ath10k-calibration-data:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description:
|
||||
Calibration data + board-specific data as a byte array. The length
|
||||
can vary between hardware versions.
|
||||
|
||||
qcom,ath10k-calibration-variant:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description:
|
||||
Unique variant identifier of the calibration data in board-2.bin
|
||||
for designs with colliding bus and device specific ids
|
||||
|
||||
qcom,ath10k-pre-calibration-data:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8-array
|
||||
description:
|
||||
Pre-calibration data as a byte array. The length can vary between
|
||||
hardware versions.
|
||||
|
||||
qcom,coexist-support:
|
||||
$ref: /schemas/types.yaml#/definitions/uint8
|
||||
enum: [0, 1]
|
||||
description:
|
||||
Indicate coex support by the hardware.
|
||||
|
||||
qcom,coexist-gpio-pin:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
COEX GPIO number provided to the Wi-Fi firmware.
|
||||
|
||||
qcom,msa-fixed-perm:
|
||||
type: boolean
|
||||
description:
|
||||
Whether to skip executing an SCM call that reassigns the memory
|
||||
region ownership.
|
||||
|
||||
qcom,smem-states:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: State bits used by the AP to signal the WLAN Q6.
|
||||
items:
|
||||
- description: Signal bits used to enable/disable low power mode
|
||||
on WCN in the case of WoW (Wake on Wireless).
|
||||
|
||||
qcom,smem-state-names:
|
||||
description: The names of the state bits used for SMP2P output.
|
||||
items:
|
||||
- const: wlan-smp2p-out
|
||||
|
||||
qcom,snoc-host-cap-8bit-quirk:
|
||||
type: boolean
|
||||
description:
|
||||
Quirk specifying that the firmware expects the 8bit version
|
||||
of the host capability QMI request
|
||||
|
||||
qcom,xo-cal-data:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
XO cal offset to be configured in XO trim register.
|
||||
|
||||
vdd-0.8-cx-mx-supply:
|
||||
description: Main logic power rail
|
||||
|
||||
vdd-1.8-xo-supply:
|
||||
description: Crystal oscillator supply
|
||||
|
||||
vdd-1.3-rfa-supply:
|
||||
description: RFA supply
|
||||
|
||||
vdd-3.3-ch0-supply:
|
||||
description: Primary Wi-Fi antenna supply
|
||||
|
||||
vdd-3.3-ch1-supply:
|
||||
description: Secondary Wi-Fi antenna supply
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,ipq4019-wifi
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
minItems: 17
|
||||
maxItems: 17
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: msi0
|
||||
- const: msi1
|
||||
- const: msi2
|
||||
- const: msi3
|
||||
- const: msi4
|
||||
- const: msi5
|
||||
- const: msi6
|
||||
- const: msi7
|
||||
- const: msi8
|
||||
- const: msi9
|
||||
- const: msi10
|
||||
- const: msi11
|
||||
- const: msi12
|
||||
- const: msi13
|
||||
- const: msi14
|
||||
- const: msi15
|
||||
- const: legacy
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Wi-Fi command clock
|
||||
- description: Wi-Fi reference clock
|
||||
- description: Wi-Fi RTC clock
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: wifi_wcss_cmd
|
||||
- const: wifi_wcss_ref
|
||||
- const: wifi_wcss_rtc
|
||||
|
||||
required:
|
||||
- clocks
|
||||
- clock-names
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- resets
|
||||
- reset-names
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,wcn3990-wifi
|
||||
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: XO reference clock
|
||||
- description: Qualcomm Debug Subsystem clock
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: cxo_ref_clk_pin
|
||||
- const: qdss
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: CE0
|
||||
- description: CE1
|
||||
- description: CE2
|
||||
- description: CE3
|
||||
- description: CE4
|
||||
- description: CE5
|
||||
- description: CE6
|
||||
- description: CE7
|
||||
- description: CE8
|
||||
- description: CE9
|
||||
- description: CE10
|
||||
- description: CE11
|
||||
|
||||
interrupt-names: false
|
||||
|
||||
required:
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
# SNoC
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
wifi@18800000 {
|
||||
compatible = "qcom,wcn3990-wifi";
|
||||
reg = <0x18800000 0x800000>;
|
||||
reg-names = "membase";
|
||||
memory-region = <&wlan_msa_mem>;
|
||||
clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
|
||||
clock-names = "cxo_ref_clk_pin";
|
||||
interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
|
||||
iommus = <&anoc2_smmu 0x1900>,
|
||||
<&anoc2_smmu 0x1901>;
|
||||
qcom,snoc-host-cap-8bit-quirk;
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
||||
|
||||
wifi-firmware {
|
||||
iommus = <&apps_smmu 0x1c02 0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
# AHB
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
|
||||
|
||||
wifi@a000000 {
|
||||
compatible = "qcom,ipq4019-wifi";
|
||||
reg = <0xa000000 0x200000>;
|
||||
resets = <&gcc WIFI0_CPU_INIT_RESET>,
|
||||
<&gcc WIFI0_RADIO_SRIF_RESET>,
|
||||
<&gcc WIFI0_RADIO_WARM_RESET>,
|
||||
<&gcc WIFI0_RADIO_COLD_RESET>,
|
||||
<&gcc WIFI0_CORE_WARM_RESET>,
|
||||
<&gcc WIFI0_CORE_COLD_RESET>;
|
||||
reset-names = "wifi_cpu_init",
|
||||
"wifi_radio_srif",
|
||||
"wifi_radio_warm",
|
||||
"wifi_radio_cold",
|
||||
"wifi_core_warm",
|
||||
"wifi_core_cold";
|
||||
clocks = <&gcc GCC_WCSS2G_CLK>,
|
||||
<&gcc GCC_WCSS2G_REF_CLK>,
|
||||
<&gcc GCC_WCSS2G_RTC_CLK>;
|
||||
clock-names = "wifi_wcss_cmd",
|
||||
"wifi_wcss_ref",
|
||||
"wifi_wcss_rtc";
|
||||
interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi0",
|
||||
"msi1",
|
||||
"msi2",
|
||||
"msi3",
|
||||
"msi4",
|
||||
"msi5",
|
||||
"msi6",
|
||||
"msi7",
|
||||
"msi8",
|
||||
"msi9",
|
||||
"msi10",
|
||||
"msi11",
|
||||
"msi12",
|
||||
"msi13",
|
||||
"msi14",
|
||||
"msi15",
|
||||
"legacy";
|
||||
};
|
||||
@ -17196,7 +17196,7 @@ S: Supported
|
||||
W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
|
||||
F: drivers/net/wireless/ath/ath10k/
|
||||
F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
|
||||
F: Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
|
||||
|
||||
QUALCOMM ATHEROS ATH11K WIRELESS DRIVER
|
||||
M: Kalle Valo <kvalo@kernel.org>
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user