ARM SoC device tree changes

These changes from 30 individual branches for the most part update device
 tree files, but there are also a few source code changes that have crept
 in this time, usually in order to atomically move over a driver from
 using hardcoded data to DT probing.
 
 A number of platforms change their DT files to use the C preprocessor,
 which is causing a bit of churn, but that is hopefully only this once.
 
 There are a few conflicts with the other branches unfortunately:
 
 * in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added
   from multiple branches. Need to be careful to have the right
   set of closing braces as git gets this one wrong.
 
 * In kirkwood.dtsi, one 'ranges' line got split into two lines, while
   another line got added. Order of the lines does not matter.
 
 * in sama5d3.dtsi, some cleanup was merged the wrong way, causing
   a bogus conflict. We want the 'dmas' and 'dma-names' properties
   to get added here.
 
 * Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c
 
 * Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpGCrR//JCVInAQI50RAAsXbH1SGvjKJemXhRkFloPDYpCbgdDUFr
 ChUbjNV1xsY/jaNCfMa5/Qo7lgz/Ot7BpJef9fZn7ret+dc7nchqe/4iIkAokAUh
 E4ao9D1dP5aAA0ihdbSQHCZtR/0SUR81h6BoOVuo/1mvEiBaFbWAeYe8/6LJd9II
 OU1w9bDmjfZWYFUXs+j2VF76ueZQ+kz69XDKZUGtkqN76m1AL8lGDurj5jxvyllF
 VJns8d9q2nr2q9PferfajK6rkOIPaTpwKblxZHUgobCyOitZaiZM0NgF733TsNM6
 HXmhDhkcn7T81+SiHVfigJ/nxo9UgU4zNJCODF3WZIwGIj3FbxvCOpdCYi2NhCO8
 oLcgDk57tpoKpB3gvAmYVQHP9FIepFa/WAWyPIADA7PkpYrwgc4v+cLEHXpd8SRv
 viLLIa5QuNdMeaK+Md9OKmKZFd7uFD9jiMtmdm6IpEVDDjMgoteb2XSoEtNebmtY
 MfbW4okn118a2dFKKaPTKcXVW/a5FRp2JGfB0A58RQHaJWj3JsY1bFn/xWPEpTOA
 IWB/HHMln0LYTL2AXN9HcaL1jnGI1Wq5eWBurX+cXQ/ij1A6jfoRKYglx7AQqOHj
 iWcGYtKLLJCgiWFnLSwcljZhfoYr0/z7rhns6yo7/vhN0riy+M84OgN4HbAmUzc1
 Bgy9PnJTNo8=
 =8PtJ
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -56,3 +56,6 @@ Boards:
 
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
+
+- AM43x EPOS EVM
+  compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"

Documentation/devicetree/bindings/arm/ste-nomadik.txt

@@ -3,6 +3,11 @@ ST-Ericsson Nomadik Device Tree Bindings
 For various board the "board" node may contain specific properties
 that pertain to this particular board, such as board-specific GPIOs.
 
+Required root node property: src
+- Nomadik System and reset controller used for basic chip control, clock
+  and reset line control.
+- compatible: must be "stericsson,nomadik,src"
+
 Boards with the Nomadik SoC include:
 
 S8815 "MiniKit" manufactured by Calao Systems:

Documentation/devicetree/bindings/bus/imx-weim.txt

@@ -0,0 +1,49 @@
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term "wireless" does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+
+Required properties:
+
+ - compatible:		Should be set to "fsl,imx6q-weim"
+ - reg:			A resource specifier for the register space
+			(see the example below)
+ - clocks:		the clock, see the example below.
+ - #address-cells:	Must be set to 2 to allow memory address translation
+ - #size-cells:		Must be set to 1 to allow CS address passing
+ - ranges:		Must be set up to reflect the memory layout with four
+			integer values for each chip-select line in use:
+
+			   <cs-number> 0 <physical address of mapping> <size>
+
+Timing property for child nodes. It is mandatory, not optional.
+
+ - fsl,weim-cs-timing:	The timing array, contains 6 timing values for the
+			child node. We can get the CS index from the child
+			node's "reg" property. This property contains the values
+			for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1,
+			EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order.
+
+Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
+
+	weim: weim@021b8000 {
+		compatible = "fsl,imx6q-weim";
+		reg = <0x021b8000 0x4000>;
+		clocks = <&clks 196>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x08000000>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+					0x0000c000 0x1404a38e 0x00000000>;
+		};
+	};

Documentation/devicetree/bindings/clock/altr_socfpga.txt

@@ -9,6 +9,9 @@ Required properties:
 	"altr,socfpga-pll-clock" - for a PLL clock
 	"altr,socfpga-perip-clock" - The peripheral clock divided from the
 		PLL clock.
+	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+		can get gated.
+
 - reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
 - clocks : shall be the input parent clock phandle for the clock. This is
 	either an oscillator or a pll output.
@@ -16,3 +19,7 @@ Required properties:
 
 Optional properties:
 - fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+        and the bit index.
+- div-reg : For "socfpga-gate-clk", div-reg contains the divider register, bit shift,
+        and width.

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -102,6 +102,7 @@ Exynos4 SoC and this is specified where applicable.
   sclk_spi0_isp       174     Exynos4x12
   sclk_spi1_isp       175     Exynos4x12
   sclk_uart_isp       176     Exynos4x12
+  sclk_fimg2d         177
 
 	      [Peripheral Clock Gates]
 
@@ -129,7 +130,7 @@ Exynos4 SoC and this is specified where applicable.
   smmu_mfcl           274
   smmu_mfcr           275
   g3d                 276
-  g2d                 277     Exynos4210
+  g2d                 277
   rotator             278     Exynos4210
   mdma                279     Exynos4210
   smmu_g2d            280     Exynos4210

Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt

@@ -12,253 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
+  In clock consumers, this cell represents the clock ID exposed by the
-
+  CAR. The assignments may be found in header file
-  The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  <dt-bindings/clock/tegra114-car.h>.
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 160 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
-  above.
-
-  0	unassigned
-  1	unassigned
-  2	unassigned
-  3	unassigned
-  4	rtc
-  5	timer
-  6	uarta
-  7	unassigned	(register bit affects uartb and vfir)
-  8	unassigned
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	unassigned
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	unassigned
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	i2s0
-  31	unassigned
-
-  32	unassigned
-  33	unassigned
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	unassigned
-  38	unassigned
-  39	unassigned	(register bit affects fuse and fuse_burn)
-  40	kfuse
-  41	sbc1
-  42	nor
-  43	unassigned
-  44	sbc2
-  45	unassigned
-  46	sbc3
-  47	i2c5
-  48	dsia
-  49	unassigned
-  50	mipi
-  51	hdmi
-  52	csi
-  53	unassigned
-  54	i2c2
-  55	uartc
-  56	mipi-cal
-  57	emc
-  58	usb2
-  59	usb3
-  60	msenc
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	unassigned
-  65	uartd
-  66	unassigned
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	unassigned
-  71	owr
-  72	afi
-  73	csite
-  74	unassigned
-  75	unassigned
-  76	la
-  77	trace
-  78	soc_therm
-  79	dtv
-  80	ndspeed
-  81	i2cslow
-  82	dsib
-  83	tsec
-  84	unassigned
-  85	unassigned
-  86	unassigned
-  87	unassigned
-  88	unassigned
-  89	xusb_host
-  90	unassigned
-  91	msenc
-  92	csus
-  93	unassigned
-  94	unassigned
-  95	unassigned	(bit affects xusb_dev and xusb_dev_src)
-
-  96	unassigned
-  97	unassigned
-  98	unassigned
-  99	mselect
-  100	tsensor
-  101	i2s3
-  102	i2s4
-  103	i2c4
-  104	sbc5
-  105	sbc6
-  106	d_audio
-  107	apbif
-  108	dam0
-  109	dam1
-  110	dam2
-  111	hda2codec_2x
-  112	unassigned
-  113	audio0_2x
-  114	audio1_2x
-  115	audio2_2x
-  116	audio3_2x
-  117	audio4_2x
-  118	spdif_2x
-  119	actmon
-  120	extern1
-  121	extern2
-  122	extern3
-  123	unassigned
-  124	unassigned
-  125	hda
-  126	unassigned
-  127	se
-
-  128	hda2hdmi
-  129	unassigned
-  130	unassigned
-  131	unassigned
-  132	unassigned
-  133	unassigned
-  134	unassigned
-  135	unassigned
-  136	unassigned
-  137	unassigned
-  138	unassigned
-  139	unassigned
-  140	unassigned
-  141	unassigned
-  142	unassigned
-  143	unassigned	(bit affects xusb_falcon_src, xusb_fs_src,
-			 xusb_host_src and xusb_ss_src)
-  144	cilab
-  145	cilcd
-  146	cile
-  147	dsialp
-  148	dsiblp
-  149	unassigned
-  150	dds
-  151	unassigned
-  152	dp2
-  153	amx
-  154	adx
-  155	unassigned	(bit affects dfll_ref and dfll_soc)
-  156	xusb_ss
-
-  192	uartb
-  193	vfir
-  194	spdif_in
-  195	spdif_out
-  196	vi
-  197	vi_sensor
-  198	fuse
-  199	fuse_burn
-  200	clk_32k
-  201	clk_m
-  202	clk_m_div2
-  203	clk_m_div4
-  204	pll_ref
-  205	pll_c
-  206	pll_c_out1
-  207	pll_c2
-  208	pll_c3
-  209	pll_m
-  210	pll_m_out1
-  211	pll_p
-  212	pll_p_out1
-  213	pll_p_out2
-  214	pll_p_out3
-  215	pll_p_out4
-  216	pll_a
-  217	pll_a_out0
-  218	pll_d
-  219	pll_d_out0
-  220	pll_d2
-  221	pll_d2_out0
-  222	pll_u
-  223	pll_u_480M
-  224	pll_u_60M
-  225	pll_u_48M
-  226	pll_u_12M
-  227	pll_x
-  228	pll_x_out0
-  229	pll_re_vco
-  230	pll_re_out
-  231	pll_e_out0
-  232	spdif_in_sync
-  233	i2s0_sync
-  234	i2s1_sync
-  235	i2s2_sync
-  236	i2s3_sync
-  237	i2s4_sync
-  238	vimclk_sync
-  239	audio0
-  240	audio1
-  241	audio2
-  242	audio3
-  243	audio4
-  244	spdif
-  245	clk_out_1
-  246	clk_out_2
-  247	clk_out_3
-  248	blink
-  252	xusb_host_src
-  253	xusb_falcon_src
-  254	xusb_fs_src
-  255	xusb_ss_src
-  256	xusb_dev_src
-  257	xusb_dev
-  258	xusb_hs_src
-  259	sclk
-  260	hclk
-  261	pclk
-  262	cclk_g
-  263	cclk_lp
-  264	dfll_ref
-  265	dfll_soc
 
 Example SoC include file:
 
@@ -270,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA114_CLK_USB2>;
 	};
 };
 

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt

@@ -12,155 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
+  In clock consumers, this cell represents the clock ID exposed by the
-
+  CAR. The assignments may be found in header file
-  The first 96 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  <dt-bindings/clock/tegra20-car.h>.
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 95 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 96 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	ac97
-  4	rtc
-  5	tmr
-  6	uart1
-  7	unassigned	(register bit affects uart2 and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	twc
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	ide
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	unassigned
-  31	cache2
-
-  32	mem
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	stat_mon
-  38	pmc
-  39	fuse
-  40	kfuse
-  41	sbc1
-  42	snor
-  43	spi1
-  44	sbc2
-  45	xio
-  46	sbc3
-  47	dvc
-  48	dsi
-  49	unassigned	(register bit affects tvo and cve)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uart3
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uart4
-  66	uart5
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	unassigned
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	unassigned
-  80	unassigned
-  81	unassigned
-  82	unassigned
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	audio_2x	a/k/a audio_2x_sync_clk
-  90	clk_d
-  91	unassigned
-  92	sus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	uart2
-  97	vfir
-  98	spdif_in
-  99	spdif_out
-  100	vi
-  101	vi_sensor
-  102	tvo
-  103	cve
-  104	osc
-  105	clk_32k		a/k/a clk_s
-  106	clk_m
-  107	sclk
-  108	cclk
-  109	hclk
-  110	pclk
-  111	blink
-  112	pll_a
-  113	pll_a_out0
-  114	pll_c
-  115	pll_c_out1
-  116	pll_d
-  117	pll_d_out0
-  118	pll_e
-  119	pll_m
-  120	pll_m_out1
-  121	pll_p
-  122	pll_p_out1
-  123	pll_p_out2
-  124	pll_p_out3
-  125	pll_p_out4
-  126	pll_s
-  127	pll_u
-  128	pll_x
-  129	cop		a/k/a avp
-  130	audio		a/k/a audio_sync_clk
-  131	pll_ref
-  132	twd
 
 Example SoC include file:
 
@@ -172,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
 	};
 };
 

Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

@@ -12,212 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
+  In clock consumers, this cell represents the clock ID exposed by the
-
+  CAR. The assignments may be found in header file
-  The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  <dt-bindings/clock/tegra30-car.h>.
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 160 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	unassigned
-  4	rtc
-  5	timer
-  6	uarta
-  7	unassigned	(register bit affects uartb and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	unassigned
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	unassigned
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	i2s0
-  31	cop_cache
-
-  32	mc
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	statmon
-  38	pmc
-  39	unassigned	(register bit affects fuse and fuse_burn)
-  40	kfuse
-  41	sbc1
-  42	nor
-  43	unassigned
-  44	sbc2
-  45	unassigned
-  46	sbc3
-  47	i2c5
-  48	dsia
-  49	unassigned	(register bit affects cve and tvo)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uartc
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uartd
-  66	uarte
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	pciex
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	dtv
-  80	ndspeed
-  81	i2cslow
-  82	dsib
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	unassigned
-  90	audio_2x	a/k/a audio_2x_sync_clk
-  91	unassigned
-  92	csus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	cpu_g
-  97	cpu_lp
-  98	3d2
-  99	mselect
-  100	tsensor
-  101	i2s3
-  102	i2s4
-  103	i2c4
-  104	sbc5
-  105	sbc6
-  106	d_audio
-  107	apbif
-  108	dam0
-  109	dam1
-  110	dam2
-  111	hda2codec_2x
-  112	atomics
-  113	audio0_2x
-  114	audio1_2x
-  115	audio2_2x
-  116	audio3_2x
-  117	audio4_2x
-  118	audio5_2x
-  119	actmon
-  120	extern1
-  121	extern2
-  122	extern3
-  123	sata_oob
-  124	sata
-  125	hda
-  127	se
-  128	hda2hdmi
-  129	sata_cold
-
-  160	uartb
-  161	vfir
-  162	spdif_in
-  163	spdif_out
-  164	vi
-  165	vi_sensor
-  166	fuse
-  167	fuse_burn
-  168	cve
-  169	tvo
-
-  170	clk_32k
-  171	clk_m
-  172	clk_m_div2
-  173	clk_m_div4
-  174	pll_ref
-  175	pll_c
-  176	pll_c_out1
-  177	pll_m
-  178	pll_m_out1
-  179	pll_p
-  180	pll_p_out1
-  181	pll_p_out2
-  182	pll_p_out3
-  183	pll_p_out4
-  184	pll_a
-  185	pll_a_out0
-  186	pll_d
-  187	pll_d_out0
-  188	pll_d2
-  189	pll_d2_out0
-  190	pll_u
-  191	pll_x
-  192	pll_x_out0
-  193	pll_e
-  194	spdif_in_sync
-  195	i2s0_sync
-  196	i2s1_sync
-  197	i2s2_sync
-  198	i2s3_sync
-  199	i2s4_sync
-  200	vimclk
-  201	audio0
-  202	audio1
-  203	audio2
-  204	audio3
-  205	audio4
-  206	audio5
-  207	clk_out_1 (extern1)
-  208	clk_out_2 (extern2)
-  209	clk_out_3 (extern3)
-  210	sclk
-  211	blink
-  212	cclk_g
-  213	cclk_lp
-  214	twd
-  215	cml0
-  216	cml1
-  217	hclk
-  218	pclk
 
 Example SoC include file:
 
@@ -229,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
 	};
 };
 

Documentation/devicetree/bindings/clock/st,nomadik.txt

@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+  i.e. the driver output for the slow 32kHz chrystal, if the
+  board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+  i.e. the driver output for the main (~19.2 MHz) chrystal,
+  if the board has its own circuitry for providing this
+  osciallator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+  this table:
+
+	0:  HCLKDMA0
+	1:  HCLKSMC
+	2:  HCLKSDRAM
+	3:  HCLKDMA1
+	4:  HCLKCLCD
+	5:  PCLKIRDA
+	6:  PCLKSSP
+	7:  PCLKUART0
+	8:  PCLKSDI
+	9:  PCLKI2C0
+	10: PCLKI2C1
+	11: PCLKUART1
+	12: PCLMSP0
+	13: HCLKUSB
+	14: HCLKDIF
+	15: HCLKSAA
+	16: HCLKSVA
+	17: PCLKHSI
+	18: PCLKXTI
+	19: PCLKUART2
+	20: PCLKMSP1
+	21: PCLKMSP2
+	22: PCLKOWM
+	23: HCLKHPI
+	24: PCLKSKE
+	25: PCLKHSEM
+	26: HCLK3D
+	27: HCLKHASH
+	28: HCLKCRYP
+	29: PCLKMSHC
+	30: HCLKUSBM
+	31: HCLKRNG
+	(32, 33, 34, 35 RESERVED)
+	36: CLDCLK
+	37: IRDACLK
+	38: SSPICLK
+	39: UART0CLK
+	40: SDICLK
+	41: I2C0CLK
+	42: I2C1CLK
+	43: UART1CLK
+	44: MSPCLK0
+	45: USBCLK
+	46: DIFCLK
+	47: IPI2CCLK
+	48: IPBMCCLK
+	49: HSICLKRX
+	50: HSICLKTX
+	51: UART2CLK
+	52: MSPCLK1
+	53: MSPCLK2
+	54: OWMCLK
+	(55 RESERVED)
+	56: SKECLK
+	(57 RESERVED)
+	58: 3DCLK
+	59: PCLKMSP3
+	60: MSPCLK3
+	61: MSHCCLK
+	62: USBMCLK
+	63: RNGCCLK

Documentation/devicetree/bindings/gpu/samsung-g2d.txt

@@ -10,11 +10,16 @@ Required properties:
 	  mapped region.
 
   - interrupts : G2D interrupt number to the CPU.
+  - clocks : from common clock binding: handle to G2D clocks.
+  - clock-names : from common clock binding: must contain "sclk_fimg2d" and
+		  "fimg2d", corresponding to entries in the clocks property.
 
 Example:
 	g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
+		clocks = <&clock 177>, <&clock 277>;
+		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};

Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt

@@ -0,0 +1,16 @@
+DT bindings for the R-/SH-Mobile irqpin controller
+
+Required properties:
+
+- compatible: has to be "renesas,intc-irqpin"
+- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
+  interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+  properties
+- sense-bitfield-width: width of a single sense bitfield in the SENSE register,
+  if different from the default 4 bits
+- control-parent: disable and enable interrupts on the parent interrupt
+  controller, needed for some broken implementations

Documentation/devicetree/bindings/media/s5p-mfc.txt

@@ -15,6 +15,9 @@ Required properties:
 	  mapped region.
 
   - interrupts : MFC interrupt number to the CPU.
+  - clocks : from common clock binding: handle to mfc clocks.
+  - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
+		  corresponding to entries in the clocks property.
 
   - samsung,mfc-r : Base address of the first memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
@@ -34,6 +37,8 @@ mfc: codec@13400000 {
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
 	samsung,power-domain = <&pd_mfc>;
+	clocks = <&clock 170>, <&clock 273>;
+	clock-names = "sclk_mfc", "mfc";
 };
 
 Board specific DT entry:

Documentation/devicetree/bindings/mfd/ab8500.txt

@@ -120,7 +120,7 @@ ab8500 {
                                   "USB_LINK_STATUS",
                                   "USB_ADP_PROBE_PLUG",
                                   "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
                 v-ape-supply = <&db8500_vape_reg>;
                 musb_1v8-supply = <&db8500_vsmps2_reg>;
         };

Documentation/devicetree/bindings/mmc/bcm,kona-sdhci.txt

@@ -0,0 +1,16 @@
+Broadcom BCM281xx SDHCI
+
+This file documents differences between the core properties in mmc.txt
+and the properties present in the bcm281xx SDHCI
+
+Required properties:
+- compatible : Should be "bcm,kona-sdhci"
+
+Example:
+
+sdio2: sdio@0x3f1a0000 {
+	compatible = "bcm,kona-sdhci";
+	reg = <0x3f1a0000 0x10000>;
+	interrupts = <0x0 74 0x4>;
+};
+

Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt

@@ -58,7 +58,7 @@ Some requirements for using fsl,imx-pinctrl binding:
 
 Examples:
 usdhc@0219c000 { /* uSDHC4 */
-	fsl,card-wired;
+	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 	pinctrl-names = "default";

Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt

@@ -21,8 +21,18 @@ Required Properties:
 
   - gpio-controller: identifies the node as a gpio controller and pin bank.
   - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See generic
+    binding is used, the amount of cells must be specified as 2. See the below
-    GPIO binding documentation for description of particular cells.
+    mentioned gpio binding representation for description of particular cells.
+
+	Eg: <&gpx2 6 0>
+	<[phandle of the gpio controller node]
+	[pin number within the gpio controller]
+	[flags]>
+
+	Values for gpio specifier:
+	- Pin number: is a value between 0 to 7.
+	- Flags: 0 - Active High
+		 1 - Active Low
 
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
   mode) and pin config (pull up/down, driver strength) settings are represented
@@ -266,3 +276,33 @@ Example 4: Set up the default pin state for uart controller.
 
 		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	}
+
+Example 5: A display port client node that supports 'default' pinctrl state
+	   and gpio binding.
+
+	display-port-controller {
+		/* ... */
+
+		samsung,hpd-gpio = <&gpx2 6 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
+	};
+
+Example 6: Request the gpio for display port controller
+
+	static int exynos_dp_probe(struct platform_device *pdev)
+	{
+		int hpd_gpio, ret;
+		struct device *dev = &pdev->dev;
+		struct device_node *dp_node = dev->of_node;
+
+		/* ... */
+
+		hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
+
+		/* ... */
+
+		ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
+					    "hpd_gpio");
+		/* ... */
+	}

Documentation/devicetree/bindings/usb/exynos-usb.txt

@@ -48,3 +48,37 @@ Example:
 		clocks = <&clock 285>;
 		clock-names = "usbhost";
 	};
+
+DWC3
+Required properties:
+ - compatible: should be "samsung,exynos5250-dwusb3" for USB 3.0 DWC3
+	       controller.
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+				 with 'reg' property.
+ - ranges: allows valid 1:1 translation between child's address space and
+	   parent's address space
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Exynos dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock 286>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dwc3 {
+			compatible = "synopsys,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			usb-phy = <&usb2_phy &usb3_phy>;
+		};
+	};

Documentation/devicetree/bindings/video/exynos_dp.txt

@@ -21,6 +21,10 @@ Required properties for dp-controller:
 		of memory mapped region.
 	-interrupts:
 		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
 	-interrupt-parent:
 		phandle to Interrupt combiner node.
 	-samsung,color-space:
@@ -61,6 +65,8 @@ SOC specific portion:
 		reg = <0x145b0000 0x10000>;
 		interrupts = <10 3>;
 		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
 
 		dptx-phy {
 			reg = <0x10040720>;

arch/arm/boot/dts/Makefile

@@ -16,11 +16,13 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
 dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
 # sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
 dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
 dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
 dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
 # sam9g45
 dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
@@ -86,6 +88,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-ns2max.dtb \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb \
@@ -105,13 +109,15 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
 	imx27-pdk.dtb \
-	imx27-phytec-phycore.dtb \
+	imx27-phytec-phycore-som.dtb \
+	imx27-phytec-phycore-rdk.dtb \
 	imx31-bug.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \
+	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
@@ -119,10 +125,13 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
+	imx6q-phytec-pbab01.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
-	imx6q-sbc6x.dtb
+	imx6q-sbc6x.dtb \
+	imx6sl-evk.dtb \
+	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
@@ -132,6 +141,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10036.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10057.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
@@ -151,19 +162,26 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap4-panda-es.dtb \
 	omap4-var-som.dtb \
 	omap4-sdp.dtb \
-	omap5-evm.dtb \
+	omap4-sdp-es23plus.dtb \
+	omap5-uevm.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
-	am335x-bone.dtb
+	am335x-bone.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
+	am43x-epos-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	hrefprev60.dtb \
 	hrefv60plus.dtb \
+	ccu8540.dtb \
 	ccu9540.dtb
+dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
+	r8a7740-armadillo800eva-reference.dtb \
 	r8a7779-marzen-reference.dtb \
 	r8a7790-lager.dtb \
 	sh73a0-kzm9g.dtb \
@@ -183,6 +201,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-hackberry.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -210,8 +229,11 @@ dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
 dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb \
+	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zed.dtb
 
 targets += dtbs
 targets += $(dtb-y)

arch/arm/boot/dts/am335x-bone.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x BeagleBone";
@@ -26,24 +26,104 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
-				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -55,31 +135,34 @@
 	};
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
 		compatible = "gpio-leds";
 
 		led@2 {
 			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 0>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 0>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 0>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
@@ -136,3 +219,16 @@
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 };
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am335x-evm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x EVM";
@@ -26,32 +26,143 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 
 		matrix_keypad_s0: matrix_keypad_s0 {
 			pinctrl-single,pins = <
-				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 			>;
 		};
 
 		volume_keys_s0: volume_keys_s0 {
 			pinctrl-single,pins = <
-				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+				0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		i2c1_pins: pinmux_i2c1_pins {
+			pinctrl-single,pins = <
+				0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+				0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		nandflash_pins_s0: nandflash_pins_s0 {
+			pinctrl-single,pins = <
+				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -61,6 +172,9 @@
 		};
 
 		i2c1: i2c@4802a000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+
 			status = "okay";
 			clock-frequency = <100000>;
 
@@ -102,6 +216,101 @@
 				reg = <0x48>;
 			};
 		};
+
+		elm: elm@48080000 {
+			status = "okay";
+		};
+
+		epwmss0: epwmss@48300000 {
+			status = "okay";
+
+			ecap0: ecap@48300100 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&ecap0_pins>;
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nandflash_pins_s0>;
+			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+			nand@0,0 {
+				reg = <0 0 0>; /* CS0, offset 0 */
+				nand-bus-width = <8>;
+				ti,nand-ecc-opt = "bch8";
+				gpmc,device-nand = "true";
+				gpmc,device-width = <1>;
+				gpmc,sync-clk-ps = <0>;
+				gpmc,cs-on-ns = <0>;
+				gpmc,cs-rd-off-ns = <44>;
+				gpmc,cs-wr-off-ns = <44>;
+				gpmc,adv-on-ns = <6>;
+				gpmc,adv-rd-off-ns = <34>;
+				gpmc,adv-wr-off-ns = <44>;
+				gpmc,we-on-ns = <0>;
+				gpmc,we-off-ns = <40>;
+				gpmc,oe-on-ns = <0>;
+				gpmc,oe-off-ns = <54>;
+				gpmc,access-ns = <64>;
+				gpmc,rd-cycle-ns = <82>;
+				gpmc,wr-cycle-ns = <82>;
+				gpmc,wait-on-read = "true";
+				gpmc,wait-on-write = "true";
+				gpmc,bus-turnaround-ns = <0>;
+				gpmc,cycle2cycle-delay-ns = <0>;
+				gpmc,clk-activation-ns = <0>;
+				gpmc,wait-monitoring-ns = <0>;
+				gpmc,wr-access-ns = <40>;
+				gpmc,wr-data-mux-bus-ns = <0>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				elm_id = <&elm>;
+
+				/* MTD partition table */
+				partition@0 {
+					label = "SPL1";
+					reg = <0x00000000 0x000020000>;
+				};
+
+				partition@1 {
+					label = "SPL2";
+					reg = <0x00020000 0x00020000>;
+				};
+
+				partition@2 {
+					label = "SPL3";
+					reg = <0x00040000 0x00020000>;
+				};
+
+				partition@3 {
+					label = "SPL4";
+					reg = <0x00060000 0x00020000>;
+				};
+
+				partition@4 {
+					label = "U-boot";
+					reg = <0x00080000 0x001e0000>;
+				};
+
+				partition@5 {
+					label = "environment";
+					reg = <0x00260000 0x00020000>;
+				};
+
+				partition@6 {
+					label = "Kernel";
+					reg = <0x00280000 0x00500000>;
+				};
+
+				partition@7 {
+					label = "File-System";
+					reg = <0x00780000 0x0F880000>;
+				};
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -123,12 +332,12 @@
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
 
-		row-gpios = <&gpio1 25 0	/* Bank1, pin25 */
+		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 0	/* Bank1, pin26 */
+			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 0>;	/* Bank1, pin27 */
+			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
 
-		col-gpios = <&gpio1 21 0	/* Bank1, pin21 */
+		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 0>;	/* Bank1, pin22 */
+			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
 
 		linux,keymap = <0x0000008b	/* MENU */
 				0x0100009e	/* BACK */
@@ -147,20 +356,27 @@
 		switch@9 {
 			label = "volume-up";
 			linux,code = <115>;
-			gpios = <&gpio0 2 1>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
-			gpios = <&gpio0 3 1>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 		};
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
 };
 
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
@@ -237,6 +453,18 @@
 	};
 };
 
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 };

arch/arm/boot/dts/am335x-evmsk.dts

@@ -13,7 +13,7 @@
 
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x EVM-SK";
@@ -32,33 +32,145 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
-				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+				0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+				0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+				0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+				0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 			>;
 		};
 
 		gpio_keys_s0: gpio_keys_s0 {
 			pinctrl-single,pins = <
-				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+				0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+				0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+				0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+				0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		ecap2_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+				/* Slave 2 */
+				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+				0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+				0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+				0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+				/* Slave 2 reset value*/
+				0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -94,6 +206,16 @@
 				st,max-limit-z = <750>;
 			};
 		};
+
+		epwmss2: epwmss@48304000 {
+			status = "okay";
+
+			ecap2: ecap@48304100 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&ecap2_pins>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -111,30 +233,33 @@
 	};
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
 		compatible = "gpio-leds";
 
 		led@1 {
 			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 0>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@2 {
 			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 0>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 0>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
@@ -148,31 +273,38 @@
 		switch@1 {
 			label = "button0";
 			linux,code = <0x100>;
-			gpios = <&gpio2 3 0>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		switch@2 {
 			label = "button1";
 			linux,code = <0x101>;
-			gpios = <&gpio2 2 0>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		switch@3 {
 			label = "button2";
 			linux,code = <0x102>;
-			gpios = <&gpio0 30 0>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			gpio-key,wakeup;
 		};
 
 		switch@4 {
 			label = "button3";
 			linux,code = <0x103>;
-			gpios = <&gpio2 5 0>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 50000 1>;
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <8>;
+	};
 };
 
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
@@ -248,3 +380,15 @@
 		};
 	};
 };
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am33xx.dtsi

@@ -8,26 +8,33 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
 
 	aliases {
-		serial0 = &uart1;
+		serial0 = &uart0;
-		serial1 = &uart2;
+		serial1 = &uart1;
-		serial2 = &uart3;
+		serial2 = &uart2;
-		serial3 = &uart4;
+		serial3 = &uart3;
-		serial4 = &uart5;
+		serial4 = &uart4;
-		serial5 = &uart6;
+		serial5 = &uart5;
 		d_can0 = &dcan0;
 		d_can1 = &dcan1;
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
 
 			/*
 			 * To consider voltage drop between PMIC and SoC,
@@ -133,7 +140,7 @@
 			interrupts = <62>;
 		};
 
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
@@ -142,7 +149,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@48022000 {
+		uart1: serial@48022000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
@@ -151,7 +158,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@48024000 {
+		uart2: serial@48024000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
@@ -160,7 +167,7 @@
 			status = "disabled";
 		};
 
-		uart4: serial@481a6000 {
+		uart3: serial@481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
@@ -169,7 +176,7 @@
 			status = "disabled";
 		};
 
-		uart5: serial@481a8000 {
+		uart4: serial@481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
@@ -178,7 +185,7 @@
 			status = "disabled";
 		};
 
-		uart6: serial@481aa000 {
+		uart5: serial@481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
@@ -343,6 +350,90 @@
 			ti,hwmods = "usb_otg_hs";
 		};
 
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+				  0x48300180 0x48300180 0x80   /* EQEP */
+				  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
+				  0x48302180 0x48302180 0x80   /* EQEP */
+				  0x48302200 0x48302200 0x80>; /* EHRPWM */
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
+				  0x48304180 0x48304180 0x80   /* EQEP */
+				  0x48304200 0x48304200 0x80>; /* EHRPWM */
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
 		mac: ethernet@4a100000 {
 			compatible = "ti,cpsw";
 			ti,hwmods = "cpgmac0";
@@ -403,6 +494,14 @@
 			ti,hwmods = "wkup_m3";
 		};
 
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";

arch/arm/boot/dts/am3517-evm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TI AM3517 EVM (AM3517/05)";

arch/arm/boot/dts/am3517_mt_ventoux.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TeeJet Mt.Ventoux";

arch/arm/boot/dts/am4372.dtsi

@@ -0,0 +1,68 @@
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&gic>;
+
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		uart0: serial@44e09000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x44e09000 0x2000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000  {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48040000  0x400>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		counter32k: counter@44e86000 {
+			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+			reg = <0x44e86000 0x40>;
+		};
+	};
+};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+
+/ {
+	model = "TI AM43x EPOS EVM";
+	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+};

arch/arm/boot/dts/armada-370-db.dts

@@ -74,6 +74,7 @@
 				 */
 				status = "disabled";
 				/* No CD or WP GPIOs */
+				broken-cd;
 			};
 
 			usb@50000 {

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -99,6 +99,7 @@
 				 * No CD or WP GPIOs: SDIO interface used for
 				 * Wifi/Bluetooth chip
 				 */
+				 broken-cd;
 			};
 
 			usb@50000 {

arch/arm/boot/dts/armada-370-rd.dts

@@ -64,6 +64,7 @@
 				pinctrl-names = "default";
 				status = "okay";
 				/* No CD or WP GPIOs */
+				broken-cd;
 			};
 
 			usb@50000 {
@@ -84,6 +85,22 @@
 					gpios = <&gpio0 6 1>;
 				};
 			};
+
+			pcie-controller {
+				status = "okay";
+
+				/* Internal mini-PCIe connector */
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+
+				/* Internal mini-PCIe connector */
+				pcie@2,0 {
+					/* Port 1, Lane 0 */
+					status = "okay";
+				};
+			};
 		};
 	};
  };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -22,9 +22,18 @@
 	model = "Marvell Armada 370 and XP SoC";
 	compatible = "marvell,armada-370-xp";
 
+	aliases {
+		eth0 = &eth0;
+		eth1 = &eth1;
+	};
+
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
 			compatible = "marvell,sheeva-v7";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -94,7 +103,7 @@
 				reg = <0x72004 0x4>;
 			};
 
-			ethernet@70000 {
+			eth0: ethernet@70000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x70000 0x4000>;
 				interrupts = <8>;
@@ -102,7 +111,7 @@
 				status = "disabled";
 			};
 
-			ethernet@74000 {
+			eth1: ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x74000 0x4000>;
 				interrupts = <10>;
@@ -143,6 +152,10 @@
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
 				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/armada-370.dtsi

@@ -180,10 +180,6 @@
 
 				bus-range = <0x00 0xff>;
 
-				reg = <0x40000 0x2000>, <0x80000 0x2000>;
-
-				reg-names = "pcie0.0", "pcie1.0";
-
 				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
 					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
 					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */

arch/arm/boot/dts/armada-xp-db.dts

@@ -30,6 +30,10 @@
 	};
 
 	soc {
+		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
+			  0xf0000000 0 0xf0000000 0x1000000>;	/* Device Bus, NOR 16MiB   */
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <250000000>;
@@ -97,6 +101,7 @@
 				pinctrl-names = "default";
 				status = "okay";
 				/* No CD or WP GPIOs */
+				broken-cd;
 			};
 
 			usb@50000 {
@@ -155,6 +160,35 @@
 					status = "okay";
 				};
 			};
+
+			devbus-bootcs@10400 {
+				status = "okay";
+				ranges = <0 0xf0000000 0x1000000>;
+
+				/* Device Bus parameters are required */
+
+				/* Read parameters */
+				devbus,bus-width    = <8>;
+				devbus,turn-off-ps  = <60000>;
+				devbus,badr-skew-ps = <0>;
+				devbus,acc-first-ps = <124000>;
+				devbus,acc-next-ps  = <248000>;
+				devbus,rd-setup-ps  = <0>;
+				devbus,rd-hold-ps   = <0>;
+
+				/* Write parameters */
+				devbus,sync-enable = <0>;
+				devbus,wr-high-ps  = <60000>;
+				devbus,wr-low-ps   = <60000>;
+				devbus,ale-wr-ps   = <60000>;
+
+				/* NOR 16 MiB */
+				nor@0 {
+					compatible = "cfi-flash";
+					reg = <0 0x1000000>;
+					bank-width = <2>;
+				};
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-gp.dts

@@ -105,6 +105,16 @@
 				phy-mode = "rgmii-id";
 			};
 
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
 			spi0: spi@10600 {
 				status = "okay";
 

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -23,6 +23,7 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		eth3 = &eth3;
 	};
 
 
@@ -105,7 +106,7 @@
 				interrupts = <91>;
 			};
 
-			ethernet@34000 {
+			eth3: ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -138,13 +138,22 @@
 				nr-ports = <2>;
 				status = "okay";
 			};
+
+			/* Front side USB 0 */
 			usb@50000 {
 				status = "okay";
 			};
+
+			/* Front side USB 1 */
 			usb@51000 {
 				status = "okay";
 			};
 
+			/* USB interface in the mini-PCIe connector */
+			usb@52000 {
+				status = "okay";
+			};
+
 			devbus-bootcs@10400 {
 				status = "okay";
 				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */

arch/arm/boot/dts/armada-xp.dtsi

@@ -22,6 +22,10 @@
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
+	aliases {
+		eth2 = &eth2;
+	};
+
 	soc {
 		internal-regs {
 			L2: l2-cache {
@@ -86,7 +90,7 @@
 				reg = <0x18200 0x500>;
 			};
 
-			ethernet@30000 {
+			eth2: ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x30000 0x4000>;
 				interrupts = <12>;

arch/arm/boot/dts/at91-ariag25.dts

@@ -21,6 +21,7 @@
 		serial3 = &usart2;
 		serial4 = &usart3;
 		serial5 = &uart0;
+		serial6 = &uart1;
 	};
 
 	chosen {
@@ -112,13 +113,17 @@
 				status = "okay";
 			};
 
+			/*
+			 * UART0/1 pins are marked as GPIO on
+			 * Aria documentation.
+			 * Change to "okay" if you need additional serial ports
+			 */
 			uart0: serial@f8040000 {
-				compatible = "atmel,at91sam9260-usart";
+				status = "disabled";
-				reg = <0xf8040000 0x200>;
+			};
-				interrupts = <15 4 5>;
+
-				pinctrl-names = "default";
+			uart1: serial@f8044000 {
-				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
-				status = "okay";
 			};
 
 			adc0: adc@f804c000 {
@@ -138,6 +143,10 @@
 					};
 				};
 			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00600000 {

arch/arm/boot/dts/at91-foxg20.dts

@@ -0,0 +1,157 @@
+/*
+ * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
+ *
+ * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Acme Systems FoxG20";
+	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			uart0: serial@fffd4000 {
+				status = "okay";
+			};
+
+			uart1: serial@fffd8000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* red LED marked "PC7" near mini USB (device) receptacle */
+		user_led {
+			label = "user_led";
+			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn {
+			label = "Button";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/boot/dts/at91rm9200.dtsi

@@ -38,8 +38,12 @@
 		ssc2 = &ssc2;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
 			compatible = "arm,arm920t";
+			device_type = "cpu";
 		};
 	};
 
@@ -398,6 +402,91 @@
 					};
 				};
 
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -498,6 +587,17 @@
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
 				status = "disabled";
 			};
+
+			spi0: spi@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffe0000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91rm9200ek.dts

@@ -53,6 +53,16 @@
 				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
+
+			spi0: spi@fffe0000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
 		};
 
 		usb0: ohci@00300000 {

arch/arm/boot/dts/at91sam9260.dtsi

@@ -35,8 +35,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -347,6 +351,90 @@
 					};
 				};
 
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -599,6 +687,8 @@
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/at91sam9263.dtsi

@@ -32,8 +32,12 @@
 		ssc1 = &ssc1;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -324,6 +328,44 @@
 					};
 				};
 
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;

arch/arm/boot/dts/at91sam9263ek.dts

@@ -89,6 +89,10 @@
 					reg = <0>;
 				};
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -104,6 +104,10 @@
 					reg = <1>;
 				};
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -38,8 +39,12 @@
 		ssc1 = &ssc1;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -344,6 +349,82 @@
 					};
 				};
 
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -537,7 +618,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -548,7 +629,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 13>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -582,6 +663,68 @@
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
 			};
+
+			usb2: gadget@fff78000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+
+				ep0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -59,6 +59,10 @@
 				status = "okay";
 			};
 
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
 			mmc0: mmc@fff80000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -112,6 +116,11 @@
 					reg = <0>;
 				};
 			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -34,8 +35,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -93,7 +98,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma 1 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -286,6 +291,82 @@
 					};
 				};
 
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -385,8 +466,8 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 13>,
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
-				       <&dma 1 14>;
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -397,8 +478,8 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma 1 15>,
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
-				       <&dma 1 16>;
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -411,6 +492,9 @@
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0000000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -422,10 +506,19 @@
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0004000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
 			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -77,6 +77,10 @@
 					reg = <0>;
 				};
 			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -10,6 +10,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -36,8 +37,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -414,6 +419,82 @@
 					};
 				};
 
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -470,7 +551,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 1 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -481,7 +562,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xf000c000 0x600>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma1 1 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -544,8 +625,8 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8010000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 7>,
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
-				       <&dma0 1 8>;
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -558,8 +639,8 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8014000 0x100>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma1 1 5>,
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
-				       <&dma1 1 6>;
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -572,8 +653,8 @@
 				compatible = "atmel,at91sam9x5-i2c";
 				reg = <0xf8018000 0x100>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
-				dmas = <&dma0 1 9>,
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
-				       <&dma0 1 10>;
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -582,6 +663,24 @@
 				status = "disabled";
 			};
 
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				status = "disabled";
+			};
+
 			adc0: adc@f804c000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xf804c000 0x100>;
@@ -629,6 +728,9 @@
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0000000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
 				status = "disabled";
@@ -640,13 +742,84 @@
 				compatible = "atmel,at91rm9200-spi";
 				reg = <0xf0004000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
 				status = "disabled";
 			};
 
+			usb2: gadget@f803c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				status = "disabled";
+
+				ep0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				status = "disabled";
+			};
+
 			rtc@fffffeb0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,at91sam9x5-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9x5ek.dtsi

@@ -52,6 +52,11 @@
 				status = "okay";
 			};
 
+			usb2: gadget@f803c000 {
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
 			};
@@ -81,6 +86,10 @@
 					reg = <0>;
 				};
 			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00600000 {

arch/arm/boot/dts/bcm11351-brt.dts

@@ -13,7 +13,7 @@
 
 /dts-v1/;
 
-/include/ "bcm11351.dtsi"
+#include "bcm11351.dtsi"
 
 / {
 	model = "BCM11351 BRT board";
@@ -27,4 +27,21 @@
 		status = "okay";
 	};
 
+	sdio0: sdio@0x3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio1: sdio@0x3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio3: sdio@0x3f1b0000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+
 };

arch/arm/boot/dts/bcm11351.dtsi

@@ -11,7 +11,10 @@
  * GNU General Public License for more details.
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
 
 / {
 	model = "BCM11351 SoC";
@@ -33,7 +36,7 @@
 
 	smc@0x3404c000 {
 		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
-		reg = <0x3404c000 0x400>; //1 KiB in SRAM
+		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
 	uart@3e000000 {
@@ -41,7 +44,7 @@
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clock-frequency = <13000000>;
-		interrupts = <0x0 67 0x4>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 	};
@@ -56,8 +59,36 @@
 	timer@35006000 {
 		compatible = "bcm,kona-timer";
 		reg = <0x35006000 0x1000>;
-		interrupts = <0x0 7 0x4>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <32768>;
 	};
 
+	sdio0: sdio@0x3f180000 {
+		compatible = "bcm,kona-sdhci";
+		reg = <0x3f180000 0x10000>;
+		interrupts = <0x0 77 0x4>;
+		status = "disabled";
+	};
+
+	sdio1: sdio@0x3f190000 {
+		compatible = "bcm,kona-sdhci";
+		reg = <0x3f190000 0x10000>;
+		interrupts = <0x0 76 0x4>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@0x3f1a0000 {
+		compatible = "bcm,kona-sdhci";
+		reg = <0x3f1a0000 0x10000>;
+		interrupts = <0x0 74 0x4>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@0x3f1b0000 {
+		compatible = "bcm,kona-sdhci";
+		reg = <0x3f1b0000 0x10000>;
+		interrupts = <0x0 73 0x4>;
+		status = "disabled";
+	};
+
 };

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -8,6 +8,17 @@
 	memory {
 		reg = <0 0x10000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		act {
+			label = "ACT";
+			gpios = <&gpio 16 1>;
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
 
 &gpio {

arch/arm/boot/dts/ccu8540.dts

@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson U8540 platform with Device Tree";
+	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+	memory@0 {
+		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+	};
+
+	soc {
+		prcmu@80157000 {
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+		};
+
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/ccu9540.dts

@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
 
 / {
 	model = "ST-Ericsson CCU9540 platform with Device Tree";
@@ -20,7 +20,7 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
-	soc-u9500 {
+	soc {
 		uart@80120000 {
 			status = "okay";
 		};
@@ -52,7 +52,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";

arch/arm/boot/dts/dbx5x0.dtsi

@@ -9,10 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
 
 / {
-	soc-u9500 {
+	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "stericsson,db8500";
@@ -31,33 +32,33 @@
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		timer@a0410600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
 		};
 
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -70,7 +71,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -83,7 +84,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
+			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -96,7 +97,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
+			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -109,7 +110,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -122,7 +123,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
+			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -135,7 +136,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -148,7 +149,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -161,7 +162,7 @@
 			compatible = "stericsson,db8500-gpio",
 				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			st,supports-sleepmode;
@@ -171,29 +172,61 @@
 		};
 
 		pinctrl {
-			compatible = "stericsson,nmk-pinctrl";
+			compatible = "stericsson,db8500-pinctrl";
 			prcm = <&prcmu>;
 		};
 
-		usb@a03e0000 {
+		usb_per5@a03e0000 {
 			compatible = "stericsson,db8500-musb",
 				"mentor,musb";
 			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+
+			dr_mode = "otg";
+
+			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+			       <&dma 38 0 0x0>, /* Logical - MemToDev */
+			       <&dma 37 0 0x2>, /* Logical - DevToMem */
+			       <&dma 37 0 0x0>, /* Logical - MemToDev */
+			       <&dma 36 0 0x2>, /* Logical - DevToMem */
+			       <&dma 36 0 0x0>, /* Logical - MemToDev */
+			       <&dma 19 0 0x2>, /* Logical - DevToMem */
+			       <&dma 19 0 0x0>, /* Logical - MemToDev */
+			       <&dma 18 0 0x2>, /* Logical - DevToMem */
+			       <&dma 18 0 0x0>, /* Logical - MemToDev */
+			       <&dma 17 0 0x2>, /* Logical - DevToMem */
+			       <&dma 17 0 0x0>, /* Logical - MemToDev */
+			       <&dma 16 0 0x2>, /* Logical - DevToMem */
+			       <&dma 16 0 0x0>, /* Logical - MemToDev */
+			       <&dma 39 0 0x2>, /* Logical - DevToMem */
+			       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+			dma-names = "iep_1_9",  "oep_1_9",
+				    "iep_2_10", "oep_2_10",
+				    "iep_3_11", "oep_3_11",
+				    "iep_4_12", "oep_4_12",
+				    "iep_5_13", "oep_5_13",
+				    "iep_6_14", "oep_6_14",
+				    "iep_7_15", "oep_7_15",
+				    "iep_8",    "oep_8";
 		};
 
-		dma-controller@801C0000 {
+		dma: dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40",
+			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-					"stericsson,dma40";
 			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			interrupts = <0 25 0x4>;
+			reg-names = "base", "lcpa";
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <3>;
+			memcpy-channels = <56 57 58 59 60>;
 		};
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
 			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
 			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 0x4>;
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
@@ -208,7 +241,8 @@
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
-				interrupts = <21 0x4>, <22 0x4>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
 				status = "disabled";
 			 };
@@ -322,21 +356,21 @@
 			ab8500 {
 				compatible = "stericsson,ab8500";
 				interrupt-parent = <&intc>;
-				interrupts = <0 40 0x4>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 0x4
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-					              18 0x4>;
+						      18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 0x4
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 0x4>;
+						      39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 				};
@@ -369,13 +403,13 @@
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 0x4
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 0x4
+						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 0x4
+						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 0x4
+						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 0x4
+						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 0x4
+						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 0x4>;
+						       75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -383,15 +417,15 @@
 							  "USB_LINK_STATUS",
 							  "USB_ADP_PROBE_PLUG",
 							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
 					v-ape-supply = <&db8500_vape_reg>;
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 				};
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 0x4
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 0x4>;
+						      7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
@@ -410,6 +444,11 @@
 				codec: ab8500-codec {
 					compatible = "stericsson,ab8500-codec";
 
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -441,8 +480,8 @@
 					};
 
 					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-compatible = "ab8500_ldo_initcore";
+						regulator-compatible = "ab8500_ldo_intcore";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
@@ -460,14 +499,14 @@
 						regulator-compatible = "ab8500_ldo_audio";
 					};
 
-					// supply for v-anamic1 VAMic1-LDO
+					// supply for v-anamic1 VAMIC1 LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 						regulator-compatible = "ab8500_ldo_anamic1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-compatible = "ab8500_ldo_amamic2";
+						regulator-compatible = "ab8500_ldo_anamic2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
@@ -486,7 +525,7 @@
 		i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -499,7 +538,7 @@
 		i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
+			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -512,7 +551,7 @@
 		i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
+			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -525,7 +564,7 @@
 		i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -538,7 +577,7 @@
 		i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 			arm,primecell-periphid = <0x180024>;
 
 			#address-cells = <1>;
@@ -551,82 +590,114 @@
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 0x4>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
-				    &gpio6 22 0x4 &gpio7 0 0x4>;
-
 		};
 
 		uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+			       <&dma 13 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+			       <&dma 12 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
+
 		uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
+			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+			       <&dma 11 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
+			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+			       <&dma 29 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+			       <&dma 32 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
+			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+			       <&dma 28 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+			       <&dma 42 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
 			status = "disabled";
 		};
 
 		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 0x4>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 0x4>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -634,7 +705,7 @@
 		msp1: msp@80124000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -643,7 +714,7 @@
 		msp2: msp@80117000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 0x4>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -651,7 +722,7 @@
 		msp3: msp@80125000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 0x4>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 			v-ape-supply = <&db8500_vape_reg>;
 			status = "disabled";
 		};
@@ -686,5 +757,20 @@
 
 			status = "disabled";
 		};
+
+		cryp@a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+		};
+
+		hash@a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+		};
 	};
 };

arch/arm/boot/dts/dove-cubox.dts

@@ -44,11 +44,60 @@
 			gpio = <&gpio0 1 0>;
 		};
 	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+		};
+	};
+};
 
 &sdio0 {
 	status = "okay";

arch/arm/boot/dts/exynos4.dtsi

@@ -160,6 +160,8 @@
 		reg = <0x13400000 0x10000>;
 		interrupts = <0 94 0>;
 		samsung,power-domain = <&pd_mfc>;
+		clocks = <&clock 170>, <&clock 273>;
+		clock-names = "sclk_mfc", "mfc";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos4210-origen.dts

@@ -41,6 +41,10 @@
 		enable-active-high;
 	};
 
+	tmu@100C0000 {
+		status = "okay";
+	};
+
 	sdhci@12530000 {
 		bus-width = <4>;
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
@@ -83,6 +87,150 @@
 		status = "okay";
 	};
 
+	i2c@13860000 {
+		status = "okay";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+			reg = <0x66>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <4 0>, <3 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>;
+			max8997,pmic-buck2-dvs-voltage = <1100000>;
+			max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ABB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDD_ALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VMIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDD_RTC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD_AUD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt	= <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "DVDD_SWB_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt	= <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD_PLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD_AUD_3V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt	= <3000000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "AVDD18_SWB_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDD_SWB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt	= <3300000>;
+					regulator-always-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "VDD_MIF_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt	= <1200000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VDD_ARM_1.2V";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt	= <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VDD_INT_1.1V";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VDD_G3D_1.1V";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_M1M2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "VDD_LCD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -143,4 +291,25 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <50000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
 };

arch/arm/boot/dts/exynos4210-pinctrl.dtsi

@@ -330,6 +330,95 @@
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpd0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpd0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ctrl: lcd-ctrl {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_sync: lcd-sync {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_en: lcd-en {
+			samsung,pins = "gpe3-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_clk: lcd-clk {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data16: lcd-data-width16 {
+			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data18: lcd-data-width18 {
+			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+					"gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data24: lcd-data-width24 {
+			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@11000000 {

arch/arm/boot/dts/exynos4210.dtsi

@@ -112,12 +112,17 @@
 		interrupt-parent = <&combiner>;
 		reg = <0x100C0000 0x100>;
 		interrupts = <2 4>;
+		clocks = <&clock 383>;
+		clock-names = "tmu_apbif";
+		status = "disabled";
 	};
 
 	g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
+		clocks = <&clock 177>, <&clock 277>;
+		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/exynos4412-odroidx.dts

@@ -43,6 +43,7 @@
 		#size-cells = <0>;
 		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 		pinctrl-names = "default";
+		vmmc-supply = <&ldo20_reg &buck8_reg>;
 		status = "okay";
 
 		num-slots = <1>;
@@ -78,6 +79,7 @@
 		bus-width = <4>;
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 		pinctrl-names = "default";
+		vmmc-supply = <&ldo4_reg &ldo21_reg>;
 		status = "okay";
 	};
 
@@ -108,4 +110,199 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	i2c@13860000 {
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		max77686: pmic@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M1_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDQ_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_MMC2_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDDQ_MMC1_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_USB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_HSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "LDO20_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "LDO21_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDDQ_LCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-microvolt-offset = <50000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_CKEM1_2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "BUCK6_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "BUCK7_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "BUCK8_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
 };

arch/arm/boot/dts/exynos4412-origen.dts

@@ -36,6 +36,72 @@
 		enable-active-high;
 	};
 
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <3>;
+		samsung,keypad-num-columns = <2>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		key_home {
+			keypad,row = <0>;
+			keypad,column = <0>;
+			linux,code = <102>;
+		};
+
+		key_down {
+			keypad,row = <0>;
+			keypad,column = <1>;
+			linux,code = <108>;
+		};
+
+		key_up {
+			keypad,row = <1>;
+			keypad,column = <0>;
+			linux,code = <103>;
+		};
+
+		key_menu {
+			keypad,row = <1>;
+			keypad,column = <1>;
+			linux,code = <139>;
+		};
+
+		key_back {
+			keypad,row = <2>;
+			keypad,column = <0>;
+			linux,code = <158>;
+		};
+
+		key_enter {
+			keypad,row = <2>;
+			keypad,column = <1>;
+			linux,code = <28>;
+		};
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
 	sdhci@12530000 {
 		bus-width = <4>;
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;

arch/arm/boot/dts/exynos4412-smdk4412.dts

@@ -31,8 +31,91 @@
 		status = "okay";
 	};
 
-	g2d@10800000 {
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <3>;
+		samsung,keypad-num-columns = <8>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
+		pinctrl-names = "default";
 		status = "okay";
+
+		key_1 {
+			keypad,row = <1>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <1>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <1>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+
+		key_4 {
+			keypad,row = <1>;
+			keypad,column = <6>;
+			linux,code = <5>;
+		};
+
+		key_5 {
+			keypad,row = <1>;
+			keypad,column = <7>;
+			linux,code = <6>;
+		};
+
+		key_A {
+			keypad,row = <2>;
+			keypad,column = <6>;
+			linux,code = <30>;
+		};
+
+		key_B {
+			keypad,row = <2>;
+			keypad,column = <7>;
+			linux,code = <48>;
+		};
+
+		key_C {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <46>;
+		};
+
+		key_D {
+			keypad,row = <2>;
+			keypad,column = <5>;
+			linux,code = <32>;
+		};
+
+		key_E {
+			keypad,row = <0>;
+			keypad,column = <7>;
+			linux,code = <18>;
+		};
 	};
 
 	sdhci@12530000 {

arch/arm/boot/dts/exynos4x12-pinctrl.dtsi

@@ -778,62 +778,6 @@
 			samsung,pin-drv = <3>;
 		};
 
-		keypad_col0: keypad-col0 {
-			samsung,pins = "gpl2-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col1: keypad-col1 {
-			samsung,pins = "gpl2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col2: keypad-col2 {
-			samsung,pins = "gpl2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col3: keypad-col3 {
-			samsung,pins = "gpl2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col4: keypad-col4 {
-			samsung,pins = "gpl2-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col5: keypad-col5 {
-			samsung,pins = "gpl2-5";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col6: keypad-col6 {
-			samsung,pins = "gpl2-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_col7: keypad-col7 {
-			samsung,pins = "gpl2-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
 		cam_port_b: cam-port-b {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",

arch/arm/boot/dts/exynos4x12.dtsi

@@ -28,14 +28,6 @@
 		pinctrl3 = &pinctrl_3;
 	};
 
-	combiner:interrupt-controller@10440000 {
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
-	};
-
 	clock: clock-controller@0x10030000 {
 		compatible = "samsung,exynos4412-clock";
 		reg = <0x10030000 0x20000>;
@@ -77,6 +69,8 @@
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
 		interrupts = <0 89 0>;
+		clocks = <&clock 177>, <&clock 277>;
+		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -449,4 +449,35 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
+
+	fimd: fimd@14400000 {
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				/* 2560x1600 DP panel */
+				clock-frequency = <50000>;
+				hactive = <2560>;
+				vactive = <1600>;
+				hfront-porch = <48>;
+				hback-porch = <80>;
+				hsync-len = <32>;
+				vback-porch = <16>;
+				vfront-porch = <8>;
+				vsync-len = <6>;
+			};
+		};
+	};
+
+	rtc {
+		status = "okay";
+	};
 };

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -553,6 +553,13 @@
 			samsung,pin-pud = <0>;
 			samaung,pin-drv = <0>;
 		};
+
+		dp_hpd: dp_hpd {
+			samsung,pins = "gpx0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samaung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@13400000 {

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -37,6 +37,30 @@
 		};
 	};
 
+	vdd:fixed-regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	dbvdd:fixed-regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spkvdd:fixed-regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	i2c@12C70000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
@@ -47,8 +71,17 @@
 		};
 
 		wm8994: wm8994@1a {
-			 compatible = "wlf,wm8994";
+			compatible = "wlf,wm8994";
-			 reg = <0x1a>;
+			reg = <0x1a>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			AVDD2-supply = <&vdd>;
+			CPVDD-supply = <&vdd>;
+			DBVDD-supply = <&dbvdd>;
+			SPKVDD1-supply = <&spkvdd>;
+			SPKVDD2-supply = <&spkvdd>;
 		};
 	};
 
@@ -224,6 +257,9 @@
 		samsung,color-depth = <1>;
 		samsung,link-rate = <0x0a>;
 		samsung,lane-count = <4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
 	};
 
 	display-timings {

arch/arm/boot/dts/exynos5250-snow.dts

@@ -171,6 +171,10 @@
 		};
 	};
 
+	rtc {
+		status = "okay";
+	};
+
 	/*
 	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
 	 * reduce EMI.

arch/arm/boot/dts/exynos5250.dtsi

@@ -479,6 +479,36 @@
 		pinctrl-0 = <&i2s2_bus>;
 	};
 
+	usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock 286>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dwc3 {
+			compatible = "synopsys,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			usb-phy = <&usb2_phy &usb3_phy>;
+		};
+	};
+
+	usb3_phy: usbphy@12100000 {
+		compatible = "samsung,exynos5250-usb3phy";
+		reg = <0x12100000 0x100>;
+		clocks = <&clock 1>, <&clock 286>;
+		clock-names = "ext_xtal", "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			reg = <0x10040704 0x8>;
+		};
+	};
+
 	usb@12110000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12110000 0x100>;
@@ -497,7 +527,7 @@
 		clock-names = "usbhost";
 	};
 
-	usbphy@12130000 {
+	usb2_phy: usbphy@12130000 {
 		compatible = "samsung,exynos5250-usb2phy";
 		reg = <0x12130000 0x100>;
 		clocks = <&clock 1>, <&clock 285>;
@@ -621,6 +651,8 @@
 		reg = <0x145b0000 0x1000>;
 		interrupts = <10 3>;
 		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
 		#address-cells = <1>;
 		#size-cells = <0>;
 

arch/arm/boot/dts/exynos5440-sd5v1.dts

@@ -17,7 +17,7 @@
 	compatible = "samsung,sd5v1", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
 	fixed-rate-clocks {

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -17,11 +17,46 @@
 	compatible = "samsung,ssdk5440", "samsung,exynos5440";
 
 	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
-	spi {
+	spi_0: spi@D0000 {
-		status = "disabled";
+
+		flash: w25q128@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "winbond,w25q128";
+			spi-max-frequency = <15625000>;
+			reg = <0>;
+			controller-data {
+				samsung,spi-feedback-delay = <0>;
+			};
+
+			partition@00000 {
+				label = "BootLoader";
+				reg = <0x60000 0x80000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "Recovery-Kernel";
+				reg = <0xe0000 0x300000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "CRAM-FS";
+				reg = <0x3e0000 0x700000>;
+				read-only;
+			};
+
+			partition@ae0000 {
+				label = "User-Data";
+				reg = <0xae0000 0x520000>;
+			};
+
+		};
+
 	};
 
 	fixed-rate-clocks {

arch/arm/boot/dts/exynos5440.dtsi

@@ -16,6 +16,10 @@
 
 	interrupt-parent = <&gic>;
 
+	aliases {
+		spi0 = &spi_0;
+	};
+
 	clock: clock-controller@0x160000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x1000>;
@@ -38,18 +42,22 @@
 		#size-cells = <0>;
 
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 		};
 		cpu@2 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 		};
 		cpu@3 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 		};
@@ -79,8 +87,13 @@
 		interrupts = <0 57 0>;
 		operating-points = <
 				/* KHz	  uV */
+				1500000 1100000
+				1400000 1075000
+				1300000 1050000
 				1200000 1025000
+				1100000 1000000
 				1000000 975000
+				900000  950000
 				800000  925000
 		>;
 	};
@@ -101,14 +114,14 @@
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
-	spi {
+	spi_0: spi@D0000 {
-		compatible = "samsung,exynos4210-spi";
+		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x1000>;
+		reg = <0xD0000 0x100>;
 		interrupts = <0 4 0>;
-		tx-dma-channel = <&pdma0 5>; /* preliminary */
-		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		samsung,spi-src-clk = <0>;
+		num-cs = <1>;
 		clocks = <&clock 21>, <&clock 16>;
 		clock-names = "spi", "spi_busclk0";
 	};
@@ -184,28 +197,6 @@
 		compatible = "arm,amba-bus";
 		interrupt-parent = <&gic>;
 		ranges;
-
-		pdma0: pdma@00121000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121000 0x1000>;
-			interrupts = <0 46 0>;
-			clocks = <&clock 8>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@00120000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x120000 0x1000>;
-			interrupts = <0 47 0>;
-			clocks = <&clock 8>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
 	};
 
 	rtc {
@@ -214,7 +205,30 @@
 		interrupts = <0 17 0>, <0 16 0>;
 		clocks = <&clock 21>;
 		clock-names = "rtc";
-		status = "disabled";
+	};
+
+	sata@210000 {
+		compatible = "snps,exynos5440-ahci";
+		reg = <0x210000 0x10000>;
+		interrupts = <0 30 0>;
+		clocks = <&clock 23>;
+		clock-names = "sata";
+	};
+
+	ohci@220000 {
+		compatible = "samsung,exynos5440-ohci";
+		reg = <0x220000 0x1000>;
+		interrupts = <0 29 0>;
+		clocks = <&clock 24>;
+		clock-names = "usbhost";
+	};
+
+	ehci@221000 {
+		compatible = "samsung,exynos5440-ehci";
+		reg = <0x221000 0x1000>;
+		interrupts = <0 29 0>;
+		clocks = <&clock 24>;
+		clock-names = "usbhost";
 	};
 
 	pcie@290000 {

arch/arm/boot/dts/href.dtsi

@@ -9,7 +9,8 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "dbx5x0.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dbx5x0.dtsi"
 
 / {
 	memory {
@@ -27,7 +28,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		uart@80120000 {
 			status = "okay";
 		};
@@ -45,14 +46,14 @@
 				compatible = "tc3589x";
 				reg = <0x42>;
 				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
 
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
 				tc3589x_gpio: tc3589x_gpio {
 					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+					interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -63,17 +64,43 @@
 		};
 
 		i2c@80128000 {
-			lp5521@0x33 {
+			lp5521@33 {
-				compatible = "lp5521";
+				compatible = "national,lp5521";
 				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
+			lp5521@34 {
-			lp5521@0x34 {
+				compatible = "national,lp5521";
-				compatible = "lp5521";
 				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
 			};
-
+			bh1780@29 {
-			bh1780@0x29 {
 				compatible = "rohm,bh1780gli";
 				reg = <0x33>;
 			};
@@ -82,7 +109,7 @@
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
@@ -97,7 +124,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
@@ -106,7 +133,7 @@
 		// PoP:ed eMMC
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 
@@ -116,7 +143,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -236,7 +263,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -256,7 +283,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};
 

arch/arm/boot/dts/hrefprev60.dts

@@ -10,9 +10,9 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
-/include/ "href.dtsi"
+#include "href.dtsi"
-/include/ "stuib.dtsi"
+#include "stuib.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
@@ -24,7 +24,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		prcmu@80157000 {
 			ab8500@5 {
 				ab8500-gpio {
@@ -41,7 +41,7 @@
 		};
 
 		i2c@80110000 {
-			bu21013_tp@0x5c {
+			bu21013_tp@5c {
 				reset-gpio = <&tc3589x_gpio 13 0x4>;
 			};
 		};

arch/arm/boot/dts/hrefv60plus.dts

@@ -10,9 +10,9 @@
  */
 
 /dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
-/include/ "href.dtsi"
+#include "href.dtsi"
-/include/ "stuib.dtsi"
+#include "stuib.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
@@ -24,7 +24,7 @@
 		};
 	};
 
-	soc-u9500 {
+	soc {
 		i2c@80110000 {
 			bu21013_tp@0x5c {
 				reset-gpio = <&gpio4 15 0x4>;
@@ -34,7 +34,7 @@
 		// External Micro SD slot
 		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 			mmc-cap-sd-highspeed;
 			mmc-cap-mmc-highspeed;
@@ -48,7 +48,7 @@
 		// WLAN SDIO channel
 		sdi1_per2@80118000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <4>;
 
 			status = "okay";
@@ -57,7 +57,7 @@
 		// PoP:ed eMMC
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <50000000>;
+			max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 
@@ -67,7 +67,7 @@
 		// On-board eMMC
 		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <50000000>;
+		        max-frequency = <100000000>;
 			bus-width = <8>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -172,7 +172,7 @@
 						regulator-name = "V-MMC-SD";
 					};
 
-					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 						regulator-name = "V-INTCORE";
 					};
 
@@ -192,7 +192,7 @@
 						regulator-name = "V-AMIC1";
 					};
 
-					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 						regulator-name = "V-AMIC2";
 					};
 

arch/arm/boot/dts/imx23.dtsi

@@ -23,8 +23,12 @@
 	};
 
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 

arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts

@@ -0,0 +1,37 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycore-som.dts"
+
+/ {
+	model = "Phytec pcm970";
+	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 29 0>;
+	wp-gpios = <&gpio3 28 0>;
+	vmmc-supply = <&vmmc1_reg>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};

arch/arm/boot/dts/imx27-phytec-phycore-som.dts

@@ -0,0 +1,179 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory {
+		reg = <0x0 0x0>;
+	};
+
+	soc {
+		aipi@10000000 { /* aipi1 */
+			serial@1000a000 {
+				status = "okay";
+			};
+
+			i2c@1001d000 {
+				clock-frequency = <400000>;
+				status = "okay";
+				at24@52 {
+					compatible = "at,24c32";
+					pagesize = <32>;
+					reg = <0x52>;
+				};
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+				lm75@4a {
+					compatible = "national,lm75";
+					reg = <0x4a>;
+				};
+			};
+		};
+
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
+				phy-reset-gpios = <&gpio3 30 0>;
+				status = "okay";
+			};
+		};
+	};
+
+	nor_flash@c0000000 {
+		compatible = "cfi-flash";
+		bank-width = <2>;
+		reg = <0xc0000000 0x02000000>;
+		linux,mtd-name = "physmap-flash.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 0>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mc13783";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 0x4>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b_reg: sw1b {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b_reg: sw2b {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};

arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -1,79 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0x0 0x0>;
-	};
-
-	soc {
-		aipi@10000000 { /* aipi1 */
-			serial@1000a000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			serial@1000b000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			serial@1000c000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			i2c@1001d000 {
-				clock-frequency = <400000>;
-				status = "okay";
-				at24@52 {
-					compatible = "at,24c32";
-					pagesize = <32>;
-					reg = <0x52>;
-				};
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-				lm75@4a {
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-		};
-
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
-				status = "okay";
-			};
-		};
-	};
-
-	nor_flash@c0000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0xc0000000 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};

arch/arm/boot/dts/imx27.dtsi

@@ -25,6 +25,9 @@
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+		spi2 = &cspi3;
 	};
 
 	avic: avic-interrupt-controller@e0000000 {
@@ -58,6 +61,16 @@
 			reg = <0x10000000 0x20000>;
 			ranges;
 
+			dma: dma@10001000 {
+				compatible = "fsl,imx27-dma";
+				reg = <0x10001000 0x1000>;
+				interrupts = <32>;
+				clocks = <&clks 50>, <&clks 70>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+				#dma-channels = <16>;
+			};
+
 			wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
@@ -89,6 +102,14 @@
 				clock-names = "ipg", "per";
 			};
 
+			pwm0: pwm@10006000 {
+				compatible = "fsl,imx27-pwm";
+				reg = <0x10006000 0x1000>;
+				interrupts = <23>;
+				clocks = <&clks 34>, <&clks 61>;
+				clock-names = "ipg", "per";
+			};
+
 			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
@@ -157,6 +178,28 @@
 				status = "disabled";
 			};
 
+			sdhci1: sdhci@10013000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10013000 0x1000>;
+				interrupts = <11>;
+				clocks = <&clks 30>, <&clks 60>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: sdhci@10014000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10014000 0x1000>;
+				interrupts = <10>;
+				clocks = <&clks 29>, <&clks 60>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@10015000 {
 				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 				reg = <0x10015000 0x100>;
@@ -272,6 +315,17 @@
 				status = "disabled";
 			};
 
+			sdhci3: sdhci@1001e000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x1001e000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks 28>, <&clks 60>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 36>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
 			gpt6: timer@1001f000 {
 				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
 				reg = <0x1001f000 0x1000>;
@@ -288,6 +342,21 @@
 			reg = <0x10020000 0x20000>;
 			ranges;
 
+			coda: coda@10023000 {
+				compatible = "fsl,imx27-vpu";
+				reg = <0x10023000 0x0200>;
+				interrupts = <53>;
+				clocks = <&clks 57>, <&clks 66>;
+				clock-names = "per", "ahb";
+				iram = <&iram>;
+			};
+
+			clks: ccm@10027000{
+				compatible = "fsl,imx27-ccm";
+				reg = <0x10027000 0x1000>;
+				#clock-cells = <1>;
+			};
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
@@ -296,19 +365,16 @@
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
-
-			clks: ccm@10027000{
-				compatible = "fsl,imx27-ccm";
-				reg = <0x10027000 0x1000>;
-				#clock-cells = <1>;
-			};
 		};
 
+		iram: iram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
 
 		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-
 			compatible = "fsl,imx27-nand";
 			reg = <0xd8000000 0x1000>;
 			interrupts = <29>;

arch/arm/boot/dts/imx28-apf28dev.dts

@@ -103,6 +103,7 @@
 
 		apbx@80040000 {
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/imx28-cfa10036.dts

@@ -45,6 +45,17 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				usb0_otg_cfa10036: otg-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 			};
 
 			ssp0: ssp@80010000 {
@@ -58,12 +69,6 @@
 		};
 
 		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_b>;
@@ -73,15 +78,30 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_b>;
+				clock-frequency = <400000>;
 				status = "okay";
 
-				ssd1307: oled@3c {
+				ssd1306: oled@3c {
-					compatible = "solomon,ssd1307fb-i2c";
+					compatible = "solomon,ssd1306fb-i2c";
 					reg = <0x3c>;
-					pwms = <&pwm 4 3000>;
 					reset-gpios = <&gpio2 7 0>;
+					solomon,height = <32>;
+					solomon,width = <128>;
+					solomon,page-offset = <0>;
 				};
 			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_cfa10036>;
+			status = "okay";
 		};
 	};
 

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -33,7 +33,7 @@
 						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
 						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
 						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
-						0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -166,8 +166,8 @@
 
 		apbx@80040000 {
 			pwm: pwm@80064000 {
-				pinctrl-names = "default", "default";
+				pinctrl-names = "default";
-				pinctrl-1 = <&pwm3_pins_b>;
+				pinctrl-0 = <&pwm3_pins_b>;
 				status = "okay";
 			};
 
@@ -265,7 +265,7 @@
 		gpio-sck = <&gpio2 16 0>;
 		gpio-mosi = <&gpio2 17 0>;
 		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 23 0>;
+		cs-gpios = <&gpio3 5 0>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/imx28-cfa10055.dts

@@ -0,0 +1,179 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+/include/ "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10055
+					&hog_pins_cfa10055_pullup>;
+
+				hog_pins_cfa10055: hog-10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_cfa10055: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+					     &lcdif_pins_cfa10055>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};

arch/arm/boot/dts/imx28-cfa10057.dts

@@ -0,0 +1,191 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10057
+					&hog_pins_cfa10057_pullup>;
+
+				hog_pins_cfa10057: hog-10057@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_cfa10057: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+					     &lcdif_pins_cfa10057>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hfront-porch = <12>;
+							hback-porch = <2>;
+							vfront-porch = <5>;
+							vback-porch = <3>;
+							hsync-len = <2>;
+							vsync-len = <2>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};

arch/arm/boot/dts/imx28-m28evk.dts

@@ -220,7 +220,19 @@
 
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_b>;
 				status = "okay";
 			};
 		};

arch/arm/boot/dts/imx28.dtsi

@@ -32,8 +32,12 @@
 	};
 
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
-			compatible = "arm,arm926ejs";
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -330,6 +334,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -354,6 +369,28 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -669,7 +706,7 @@
 			};
 
 			digctl@8001c000 {
-				compatible = "fsl,imx28-digctl";
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";

arch/arm/boot/dts/imx51-apf51.dts

@@ -45,6 +45,13 @@
 	status = "okay";
 };
 
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3_2>;

arch/arm/boot/dts/imx51.dtsi

@@ -175,10 +175,20 @@
 				};
 			};
 
+			usbphy0: usbphy@0 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks 124>;
+				clock-names = "main_clk";
+				status = "okay";
+			};
+
 			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
 			};
 
@@ -186,6 +196,8 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
 
@@ -193,6 +205,8 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -200,9 +214,18 @@
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@73f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx51-usbmisc";
+				reg = <0x73f80800 0x200>;
+				clocks = <&clks 108>;
+			};
+
 			gpio1: gpio@73f84000 {
 				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
 				reg = <0x73f84000 0x4000>;

arch/arm/boot/dts/imx53-m53evk.dts

@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "DENX M53EVK";
+	compatible = "denx,imx53-m53evk", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>;
+	};
+
+	soc {
+		display@di1 {
+			compatible = "fsl,imx-parallel-display";
+			crtcs = <&ipu 1>;
+			interface-pix-fmt = "bgr666";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+
+			display-timings {
+				800x480p60 {
+					native-mode;
+					clock-frequency = <31500000>;
+					hactive = <800>;
+					vactive = <480>;
+					hfront-porch = <40>;
+					hback-porch = <88>;
+					hsync-len = <128>;
+					vback-porch = <33>;
+					vfront-porch = <9>;
+					vsync-len = <3>;
+					vsync-active = <1>;
+				};
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		user1 {
+			label = "user1";
+			gpios = <&gpio2 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "user2";
+			gpios = <&gpio2 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p2v: 3p2v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-m53evk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-m53evk-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Ext Spk", "LINE_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_2>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_1>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio1 1 0>;
+	wp-gpios = <&gpio1 9 0>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_2>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	stmpe610@41 {
+		compatible = "st,stmpe610";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "stmpe,ts";
+			reg = <0>;
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <3>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "stm,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+
+			>;
+		};
+
+		led_pin_gpio: led_gpio@0 {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_1>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1_1>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-mba53.dts

@@ -16,27 +16,81 @@
 / {
 	model = "TQ MBa53 starter kit";
 	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+	reg_backlight: fixed@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		gpio = <&gpio2 5 0>;
+		startup-delay-us = <5000>;
+		enable-active-low;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0 0>;
+		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+		default-brightness-level = <10>;
+		enable-gpios = <&gpio7 7 0>;
+		power-supply = <&reg_backlight>;
+	};
+
+	disp1: display@disp1 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp1_1>;
+		crtcs = <&ipu 1>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+	};
+
+	reg_3p2v: 3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "tq,imx53-mba53-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-mba53-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_1>;
+	status = "disabled";
 };
 
 &iomuxc {
 	lvds1 {
 		pinctrl_lvds1_1: lvds1-grp1 {
 			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x10000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x10000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x10000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x10000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x10000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
 			>;
 		};
 
 		pinctrl_lvds1_2: lvds1-grp2 {
 			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x10000
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x10000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x10000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x10000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x10000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
 			>;
 		};
 	};
@@ -44,33 +98,44 @@
 	disp1 {
 		pinctrl_disp1_1: disp1-grp1 {
 			fsl,pins = <
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x10000 /* DISP1_DRDY */
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x10000 /* DISP1_HSYNC */
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x10000 /* DISP1_VSYNC */
+				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x10000
+				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x10000
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x10000
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x10000
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x10000
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x10000
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x10000
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x10000
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x10000
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x10000
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x10000
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x10000
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x10000
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x10000
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x10000
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x10000
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x10000
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x10000
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x10000
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x10000
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x10000
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x10000
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x10000
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x10000
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
+			>;
+		};
+	};
+
+	tve {
+		pinctrl_vga_sync_1: vgasync-grp1 {
+			fsl,pins = <
+				/* VGA_VSYNC, HSYNC with max drive strength */
+				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
 			>;
 		};
 	};
@@ -80,16 +145,27 @@
 	status = "okay";
 };
 
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
 &i2c2 {
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		clocks = <&clks 150>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
 	};
 
 	expander: pca9554@20 {
 		compatible = "pca9554";
 		reg = <0x20>;
 		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
 	};
 
 	sensor2: lm75@49 {
@@ -99,6 +175,7 @@
 };
 
 &fec {
+	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
 };
 
@@ -114,10 +191,24 @@
 	status = "okay";
 };
 
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
 &uart1 {
 	status = "okay";
 };
 
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -133,3 +224,13 @@
 &i2c3 {
 	status = "okay";
 };
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync_1>;
+	ddc = <&i2c3>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};

arch/arm/boot/dts/imx53-qsb.dts

@@ -21,6 +21,33 @@
 		reg = <0x70000000 0x40000000>;
 	};
 
+	display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0_1>;
+		status = "disabled";
+		display-timings {
+			claawvga {
+				native-mode;
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -147,6 +174,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks 150>;
 	};
 };
 
@@ -268,3 +296,11 @@
 	phy-reset-gpios = <&gpio7 6 0>;
 	status = "okay";
 };
+
+&usbh1 {
+       status = "okay";
+};
+
+&usbotg {
+       status = "okay";
+};

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -35,7 +35,9 @@
 
 &esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	pinctrl-0 = <&pinctrl_esdhc2_1>,
+		    <&pinctrl_tqma53_esdhc2_2>;
+	vmmc-supply = <&reg_3p3v>;
 	wp-gpios = <&gpio1 2 0>;
 	cd-gpios = <&gpio1 4 0>;
 	status = "disabled";
@@ -69,14 +71,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	esdhc2_2 {
+		pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+			>;
+		};
+	};
+
 	i2s {
 		pinctrl_i2s_1: i2s-grp1 {
 			fsl,pins = <
-				 MX53_PAD_GPIO_19__GPIO4_5           0x10000 /* I2S_MCLK */
+				 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC  0x80000000 /* I2S_SCLK */
-				 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC  0x10000 /* I2S_SCLK */
+				 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD  0x80000000 /* I2S_DOUT */
-				 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD  0x10000 /* I2S_DOUT */
+				 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
-				 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */
+				 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x80000000 /* I2S_DIN */
-				 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x10000 /* I2S_DIN */
 			>;
 		};
 	};
@@ -84,16 +94,17 @@
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				 MX53_PAD_EIM_CS1__IPU_DI1_PIN6  0x10000 /* VSYNC */
+				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */
+				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x10000 /* LCD_BLT_EN */
+				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x10000 /* LCD_RESET */
+				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x10000 /* LCD_POWER */
+				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x10000 /* PMIC_INT */
+				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x10000 /* CSI_RST */
+				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x10000 /* CSI_PWDN */
+				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_0__GPIO1_0        0x10000 /* SYSTEM_DOWN */
+				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_GPIO_3__GPIO1_3        0x10000
+				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
+				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
 			>;
 		};
 	};
@@ -149,7 +160,7 @@
 		reg = <0x8>;
 		fsl,mc13xxx-uses-rtc;
 		interrupt-parent = <&gpio2>;
-		interrupts = <6 8>; /* PDATA_DATA6, low active */
+		interrupts = <6 4>; /* PATA_DATA6, active high */
 	};
 
 	sensor1: lm75@48 {

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -0,0 +1,122 @@
+/*
+ * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "imx53.dtsi"
+
+/ {
+	model = "Ka-Ro TX53";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_2>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_1>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	status = "disabled";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_2>;
+	status = "disabled";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2_1>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "disabled";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire_1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_1>;
+	status = "disabled";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+	status = "disabled";
+};
+
+&ssi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_2>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_2>,
+		    <&pinctrl_uart1_3>;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_2>;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};

arch/arm/boot/dts/imx53.dtsi

@@ -27,6 +27,9 @@
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
 		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
@@ -163,10 +166,27 @@
 				};
 			};
 
+			usbphy0: usbphy@0 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks 124>;
+				clock-names = "main_clk";
+				status = "okay";
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks 125>;
+				clock-names = "main_clk";
+				status = "okay";
+			};
+
 			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
 			};
 
@@ -174,6 +194,9 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
 			};
 
@@ -181,6 +204,8 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -188,9 +213,18 @@
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
+				clocks = <&clks 108>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks 108>;
+			};
+
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
@@ -267,6 +301,24 @@
 							MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x80000000
 						>;
 					};
+
+					pinctrl_audmux_2: audmuxgrp-2 {
+						fsl,pins = <
+							MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+							MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+							MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+							MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+						>;
+					};
+
+					pinctrl_audmux_3: audmuxgrp-3 {
+						fsl,pins = <
+							MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+							MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+							MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+							MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+						>;
+					};
 				};
 
 				fec {
@@ -284,6 +336,29 @@
 							MX53_PAD_FEC_TXD0__FEC_TDATA_0   0x80000000
 						>;
 					};
+
+					pinctrl_fec_2: fecgrp-2 {
+						fsl,pins = <
+							MX53_PAD_FEC_MDC__FEC_MDC	 0x80000000
+							MX53_PAD_FEC_MDIO__FEC_MDIO	 0x80000000
+							MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+							MX53_PAD_FEC_RX_ER__FEC_RX_ER    0x80000000
+							MX53_PAD_FEC_CRS_DV__FEC_RX_DV   0x80000000
+							MX53_PAD_FEC_RXD1__FEC_RDATA_1   0x80000000
+							MX53_PAD_FEC_RXD0__FEC_RDATA_0   0x80000000
+							MX53_PAD_FEC_TX_EN__FEC_TX_EN    0x80000000
+							MX53_PAD_FEC_TXD1__FEC_TDATA_1   0x80000000
+							MX53_PAD_FEC_TXD0__FEC_TDATA_0   0x80000000
+							MX53_PAD_KEY_ROW1__FEC_COL	 0x80000000
+							MX53_PAD_KEY_COL3__FEC_CRS	 0x80000000
+							MX53_PAD_KEY_COL2__FEC_RDATA_2	 0x80000000
+							MX53_PAD_KEY_COL0__FEC_RDATA_3	 0x80000000
+							MX53_PAD_KEY_COL1__FEC_RX_CLK	 0x80000000
+							MX53_PAD_KEY_ROW2__FEC_TDATA_2	 0x80000000
+							MX53_PAD_GPIO_19__FEC_TDATA_3	 0x80000000
+							MX53_PAD_KEY_ROW0__FEC_TX_ER	 0x80000000
+						>;
+					};
 				};
 
 				csi {
@@ -312,6 +387,22 @@
 							MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK   0x1d5
 						>;
 					};
+
+					pinctrl_csi_2: csigrp-2 {
+						fsl,pins = <
+							MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC	0x1d5
+							MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC	0x1d5
+							MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK	0x1d5
+							MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19	0x1d5
+							MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18	0x1d5
+							MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17	0x1d5
+							MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16	0x1d5
+							MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15	0x1d5
+							MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14	0x1d5
+							MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13	0x1d5
+							MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12	0x1d5
+						>;
+					};
 				};
 
 				cspi {
@@ -322,6 +413,14 @@
 							MX53_PAD_SD1_CLK__CSPI_SCLK   0x1d5
 						>;
 					};
+
+					pinctrl_cspi_2: cspigrp-2 {
+						fsl,pins = <
+							MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
+							MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
+							MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
+						>;
+					};
 				};
 
 				ecspi1 {
@@ -332,6 +431,27 @@
 							MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
 						>;
 					};
+
+					pinctrl_ecspi1_2: ecspi1grp-2 {
+						fsl,pins = <
+							MX53_PAD_GPIO_19__ECSPI1_RDY	0x80000000
+							MX53_PAD_EIM_EB2__ECSPI1_SS0	0x80000000
+							MX53_PAD_EIM_D16__ECSPI1_SCLK	0x80000000
+							MX53_PAD_EIM_D17__ECSPI1_MISO	0x80000000
+							MX53_PAD_EIM_D18__ECSPI1_MOSI	0x80000000
+							MX53_PAD_EIM_D19__ECSPI1_SS1	0x80000000
+						>;
+					};
+				};
+
+				ecspi2 {
+					pinctrl_ecspi2_1: ecspi2grp-1 {
+						fsl,pins = <
+							MX53_PAD_EIM_OE__ECSPI2_MISO  0x80000000
+							MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
+							MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
+						>;
+					};
 				};
 
 				esdhc1 {
@@ -406,6 +526,13 @@
 							MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
 						>;
 					};
+
+					pinctrl_can1_3: can1grp-3 {
+						fsl,pins = <
+							MX53_PAD_GPIO_7__CAN1_TXCAN	0x80000000
+							MX53_PAD_GPIO_8__CAN1_RXCAN	0x80000000
+						>;
+					};
 				};
 
 				can2 {
@@ -424,6 +551,13 @@
 							MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
 						>;
 					};
+
+					pinctrl_i2c1_2: i2c1grp-2 {
+						fsl,pins = <
+							MX53_PAD_EIM_D21__I2C1_SCL	0xc0000000
+							MX53_PAD_EIM_D28__I2C1_SDA	0xc0000000
+						>;
+					};
 				};
 
 				i2c2 {
@@ -433,6 +567,13 @@
 							MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
 						>;
 					};
+
+					pinctrl_i2c2_2: i2c2grp-2 {
+						fsl,pins = <
+							MX53_PAD_EIM_D16__I2C2_SDA	0xc0000000
+							MX53_PAD_EIM_EB2__I2C2_SCL	0xc0000000
+						>;
+					};
 				};
 
 				i2c3 {
@@ -444,6 +585,119 @@
 					};
 				};
 
+				ipu_disp0 {
+					pinctrl_ipu_disp0_1: ipudisp0grp-1 {
+						fsl,pins = <
+						MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+						MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+						MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+						MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 		0x5
+						MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+						MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+						MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+						MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+						MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+						MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+						MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+						MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+						MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+						MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+						MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+						MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+						MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+						MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+						MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+						MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+						MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+						MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+						MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+						MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+						MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+						MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+						MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+						MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+						>;
+					};
+				};
+
+				ipu_disp1 {
+					pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+						fsl,pins = <
+							MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+							MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+							MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+							MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+							MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+							MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+							MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+							MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+							MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+							MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+							MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+							MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+							MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+							MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+							MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+							MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+							MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+							MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+							MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+							MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+							MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+							MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+							MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+							MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+							MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+							MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+							MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+							MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+							MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+							MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+							MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+							MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+						>;
+					};
+				};
+
+				ipu_disp2 {
+					pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+						fsl,pins = <
+							MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+							MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+							MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+							MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+							MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+							MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0	0x80000000
+							MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1	0x80000000
+							MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2	0x80000000
+							MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3	0x80000000
+							MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK	0x80000000
+						>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_1: nandgrp-1 {
+						fsl,pins = <
+							MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+							MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+							MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+							MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+							MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+							MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+							MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+							MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+							MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+							MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+							MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+							MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+							MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+							MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+							MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+						>;
+					};
+				};
+
 				owire {
 					pinctrl_owire_1: owiregrp-1 {
 						fsl,pins = <
@@ -452,6 +706,22 @@
 					};
 				};
 
+				pwm1 {
+					pinctrl_pwm1_1: pwm1grp-1 {
+						fsl,pins = <
+							MX53_PAD_DISP0_DAT8__PWM1_PWMO	0x5
+						>;
+					};
+				};
+
+				pwm2 {
+					pinctrl_pwm2_1: pwm2grp-1 {
+						fsl,pins = <
+							MX53_PAD_GPIO_1__PWM2_PWMO	0x80000000
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -466,6 +736,13 @@
 							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
 						>;
 					};
+
+					pinctrl_uart1_3: uart1grp-3 {
+						fsl,pins = <
+							MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
+							MX53_PAD_PATA_IORDY__UART1_RTS	 0x1c5
+						>;
+					};
 				};
 
 				uart2 {
@@ -475,6 +752,15 @@
 							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1c5
 						>;
 					};
+
+					pinctrl_uart2_2: uart2grp-2 {
+						fsl,pins = <
+							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+							MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+							MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+						>;
+					};
 				};
 
 				uart3 {
@@ -513,7 +799,6 @@
 						>;
 					};
 				};
-
 			};
 
 			gpr: iomuxc-gpr@53fa8000 {
@@ -781,6 +1066,16 @@
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
+
+			tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks 69>, <&clks 116>;
+				clock-names = "tve", "di_sel";
+				crtcs = <&ipu 1>;
+				status = "disabled";
+			};
 		};
 	};
 };

arch/arm/boot/dts/imx6dl-sabreauto.dts

@@ -28,4 +28,12 @@
 			>;
 		};
 	};
+
+	ecspi1 {
+		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+			fsl,pins = <
+				MX6DL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+			>;
+		};
+	};
 };

arch/arm/boot/dts/imx6dl-sabresd.dts

@@ -29,6 +29,7 @@
 				MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
 				MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
 				MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+				MX6DL_PAD_GPIO_0__CCM_CLKO1    0x130b0
 			>;
 		};
 	};