pwm: Add a driver for the STMPE PWM
This adds a driver for the PWM block found in chips of the STMPE 24xx series of multi-purpose I2C expanders. (I think STMPE means ST Microelectronics Multi-Purpose Expander.) This PWM was designed in accordance with Nokia specifications and is kind of weird and usually just switched between max and zero duty cycle. However it is indeed a PWM so it needs to live in the PWM subsystem. This PWM is mostly used for white LED backlight. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
Linus Walleij
Thierry Reding
parent
27e8c8f351
commit
ef1f09eca7
@ -372,6 +372,13 @@ config PWM_STI
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-sti.
|
||||
|
||||
config PWM_STMPE
|
||||
bool "STMPE expander PWM export"
|
||||
depends on MFD_STMPE
|
||||
help
|
||||
This enables support for the PWMs found in the STMPE I/O
|
||||
expanders.
|
||||
|
||||
config PWM_SUN4I
|
||||
tristate "Allwinner PWM support"
|
||||
depends on ARCH_SUNXI || COMPILE_TEST
|
||||
|
||||
@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o
|
||||
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
|
||||
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
|
||||
obj-$(CONFIG_PWM_STI) += pwm-sti.o
|
||||
obj-$(CONFIG_PWM_STMPE) += pwm-stmpe.o
|
||||
obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o
|
||||
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
|
||||
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
|
||||
|
||||
319
drivers/pwm/pwm-stmpe.c
Normal file
319
drivers/pwm/pwm-stmpe.c
Normal file
@ -0,0 +1,319 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Linaro Ltd.
|
||||
*
|
||||
* Author: Linus Walleij <linus.walleij@linaro.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2, as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/mfd/stmpe.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define STMPE24XX_PWMCS 0x30
|
||||
#define PWMCS_EN_PWM0 BIT(0)
|
||||
#define PWMCS_EN_PWM1 BIT(1)
|
||||
#define PWMCS_EN_PWM2 BIT(2)
|
||||
#define STMPE24XX_PWMIC0 0x38
|
||||
#define STMPE24XX_PWMIC1 0x39
|
||||
#define STMPE24XX_PWMIC2 0x3a
|
||||
|
||||
#define STMPE_PWM_24XX_PINBASE 21
|
||||
|
||||
struct stmpe_pwm {
|
||||
struct stmpe *stmpe;
|
||||
struct pwm_chip chip;
|
||||
u8 last_duty;
|
||||
};
|
||||
|
||||
static inline struct stmpe_pwm *to_stmpe_pwm(struct pwm_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct stmpe_pwm, chip);
|
||||
}
|
||||
|
||||
static int stmpe_24xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
||||
u8 value;
|
||||
int ret;
|
||||
|
||||
ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "error reading PWM#%u control\n",
|
||||
pwm->hwpwm);
|
||||
return ret;
|
||||
}
|
||||
|
||||
value = ret | BIT(pwm->hwpwm);
|
||||
|
||||
ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "error writing PWM#%u control\n",
|
||||
pwm->hwpwm);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void stmpe_24xx_pwm_disable(struct pwm_chip *chip,
|
||||
struct pwm_device *pwm)
|
||||
{
|
||||
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
||||
u8 value;
|
||||
int ret;
|
||||
|
||||
ret = stmpe_reg_read(stmpe_pwm->stmpe, STMPE24XX_PWMCS);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "error reading PWM#%u control\n",
|
||||
pwm->hwpwm);
|
||||
return;
|
||||
}
|
||||
|
||||
value = ret & ~BIT(pwm->hwpwm);
|
||||
|
||||
ret = stmpe_reg_write(stmpe_pwm->stmpe, STMPE24XX_PWMCS, value);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "error writing PWM#%u control\n",
|
||||
pwm->hwpwm);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/* STMPE 24xx PWM instructions */
|
||||
#define SMAX 0x007f
|
||||
#define SMIN 0x00ff
|
||||
#define GTS 0x0000
|
||||
#define LOAD BIT(14) /* Only available on 2403 */
|
||||
#define RAMPUP 0x0000
|
||||
#define RAMPDOWN BIT(7)
|
||||
#define PRESCALE_512 BIT(14)
|
||||
#define STEPTIME_1 BIT(8)
|
||||
#define BRANCH (BIT(15) | BIT(13))
|
||||
|
||||
static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
int duty_ns, int period_ns)
|
||||
{
|
||||
struct stmpe_pwm *stmpe_pwm = to_stmpe_pwm(chip);
|
||||
unsigned int i, pin;
|
||||
u16 program[3] = {
|
||||
SMAX,
|
||||
GTS,
|
||||
GTS,
|
||||
};
|
||||
u8 offset;
|
||||
int ret;
|
||||
|
||||
/* Make sure we are disabled */
|
||||
if (pwm_is_enabled(pwm)) {
|
||||
stmpe_24xx_pwm_disable(chip, pwm);
|
||||
} else {
|
||||
/* Connect the PWM to the pin */
|
||||
pin = pwm->hwpwm;
|
||||
|
||||
/* On STMPE2401 and 2403 pins 21,22,23 are used */
|
||||
if (stmpe_pwm->stmpe->partnum == STMPE2401 ||
|
||||
stmpe_pwm->stmpe->partnum == STMPE2403)
|
||||
pin += STMPE_PWM_24XX_PINBASE;
|
||||
|
||||
ret = stmpe_set_altfunc(stmpe_pwm->stmpe, BIT(pin),
|
||||
STMPE_BLOCK_PWM);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "unable to connect PWM#%u to pin\n",
|
||||
pwm->hwpwm);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
/* STMPE24XX */
|
||||
switch (pwm->hwpwm) {
|
||||
case 0:
|
||||
offset = STMPE24XX_PWMIC0;
|
||||
break;
|
||||
|
||||
case 1:
|
||||
offset = STMPE24XX_PWMIC1;
|
||||
break;
|
||||
|
||||
case 2:
|
||||
offset = STMPE24XX_PWMIC1;
|
||||
break;
|
||||
|
||||
default:
|
||||
/* Should not happen as npwm is 3 */
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
dev_dbg(chip->dev, "PWM#%u: config duty %d ns, period %d ns\n",
|
||||
pwm->hwpwm, duty_ns, period_ns);
|
||||
|
||||
if (duty_ns == 0) {
|
||||
if (stmpe_pwm->stmpe->partnum == STMPE2401)
|
||||
program[0] = SMAX; /* off all the time */
|
||||
|
||||
if (stmpe_pwm->stmpe->partnum == STMPE2403)
|
||||
program[0] = LOAD | 0xff; /* LOAD 0xff */
|
||||
|
||||
stmpe_pwm->last_duty = 0x00;
|
||||
} else if (duty_ns == period_ns) {
|
||||
if (stmpe_pwm->stmpe->partnum == STMPE2401)
|
||||
program[0] = SMIN; /* on all the time */
|
||||
|
||||
if (stmpe_pwm->stmpe->partnum == STMPE2403)
|
||||
program[0] = LOAD | 0x00; /* LOAD 0x00 */
|
||||
|
||||
stmpe_pwm->last_duty = 0xff;
|
||||
} else {
|
||||
u8 value, last = stmpe_pwm->last_duty;
|
||||
unsigned long duty;
|
||||
|
||||
/*
|
||||
* Counter goes from 0x00 to 0xff repeatedly at 32768 Hz,
|
||||
* (means a period of 30517 ns) then this is compared to the
|
||||
* counter from the ramp, if this is >= PWM counter the output
|
||||
* is high. With LOAD we can define how much of the cycle it
|
||||
* is on.
|
||||
*
|
||||
* Prescale = 0 -> 2 kHz -> T = 1/f = 488281.25 ns
|
||||
*/
|
||||
|
||||
/* Scale to 0..0xff */
|
||||
duty = duty_ns * 256;
|
||||
duty = DIV_ROUND_CLOSEST(duty, period_ns);
|
||||
value = duty;
|
||||
|
||||
if (value == last) {
|
||||
/* Run the old program */
|
||||
if (pwm_is_enabled(pwm))
|
||||
stmpe_24xx_pwm_enable(chip, pwm);
|
||||
|
||||
return 0;
|
||||
} else if (stmpe_pwm->stmpe->partnum == STMPE2403) {
|
||||
/* STMPE2403 can simply set the right PWM value */
|
||||
program[0] = LOAD | value;
|
||||
program[1] = 0x0000;
|
||||
} else if (stmpe_pwm->stmpe->partnum == STMPE2401) {
|
||||
/* STMPE2401 need a complex program */
|
||||
u16 incdec = 0x0000;
|
||||
|
||||
if (last < value)
|
||||
/* Count up */
|
||||
incdec = RAMPUP | (value - last);
|
||||
else
|
||||
/* Count down */
|
||||
incdec = RAMPDOWN | (last - value);
|
||||
|
||||
/* Step to desired value, smoothly */
|
||||
program[0] = PRESCALE_512 | STEPTIME_1 | incdec;
|
||||
|
||||
/* Loop eternally to 0x00 */
|
||||
program[1] = BRANCH;
|
||||
}
|
||||
|
||||
dev_dbg(chip->dev,
|
||||
"PWM#%u: value = %02x, last_duty = %02x, program=%04x,%04x,%04x\n",
|
||||
pwm->hwpwm, value, last, program[0], program[1],
|
||||
program[2]);
|
||||
stmpe_pwm->last_duty = value;
|
||||
}
|
||||
|
||||
/*
|
||||
* We can write programs of up to 64 16-bit words into this channel.
|
||||
*/
|
||||
for (i = 0; i < ARRAY_SIZE(program); i++) {
|
||||
u8 value;
|
||||
|
||||
value = (program[i] >> 8) & 0xff;
|
||||
|
||||
ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "error writing register %02x: %d\n",
|
||||
offset, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
value = program[i] & 0xff;
|
||||
|
||||
ret = stmpe_reg_write(stmpe_pwm->stmpe, offset, value);
|
||||
if (ret) {
|
||||
dev_err(chip->dev, "error writing register %02x: %d\n",
|
||||
offset, ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
/* If we were enabled, re-enable this PWM */
|
||||
if (pwm_is_enabled(pwm))
|
||||
stmpe_24xx_pwm_enable(chip, pwm);
|
||||
|
||||
/* Sleep for 200ms so we're sure it will take effect */
|
||||
msleep(200);
|
||||
|
||||
dev_dbg(chip->dev, "programmed PWM#%u, %u bytes\n", pwm->hwpwm, i);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct pwm_ops stmpe_24xx_pwm_ops = {
|
||||
.config = stmpe_24xx_pwm_config,
|
||||
.enable = stmpe_24xx_pwm_enable,
|
||||
.disable = stmpe_24xx_pwm_disable,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int __init stmpe_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
|
||||
struct stmpe_pwm *pwm;
|
||||
int ret;
|
||||
|
||||
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
||||
if (!pwm)
|
||||
return -ENOMEM;
|
||||
|
||||
pwm->stmpe = stmpe;
|
||||
pwm->chip.dev = &pdev->dev;
|
||||
pwm->chip.base = -1;
|
||||
|
||||
if (stmpe->partnum == STMPE2401 || stmpe->partnum == STMPE2403) {
|
||||
pwm->chip.ops = &stmpe_24xx_pwm_ops;
|
||||
pwm->chip.npwm = 3;
|
||||
} else {
|
||||
if (stmpe->partnum == STMPE1601)
|
||||
dev_err(&pdev->dev, "STMPE1601 not yet supported\n");
|
||||
else
|
||||
dev_err(&pdev->dev, "Unknown STMPE PWM\n");
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ret = stmpe_enable(stmpe, STMPE_BLOCK_PWM);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = pwmchip_add(&pwm->chip);
|
||||
if (ret) {
|
||||
stmpe_disable(stmpe, STMPE_BLOCK_PWM);
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, pwm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver stmpe_pwm_driver = {
|
||||
.driver = {
|
||||
.name = "stmpe-pwm",
|
||||
},
|
||||
};
|
||||
builtin_platform_driver_probe(stmpe_pwm_driver, stmpe_pwm_probe);
|
||||
Loading…
Reference in New Issue
Block a user