From f0e0ada67dfd8342fd411da6e3bff10ff9bcc97b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 11 Aug 2017 13:03:05 +0200 Subject: [PATCH] reset: zx2967: use the reset-simple driver The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel Reviewed-by: Alexandru Gagniuc --- MAINTAINERS | 1 - drivers/reset/Kconfig | 10 +--- drivers/reset/Makefile | 1 - drivers/reset/reset-simple.c | 2 + drivers/reset/reset-zx2967.c | 99 ------------------------------------ 5 files changed, 4 insertions(+), 109 deletions(-) delete mode 100644 drivers/reset/reset-zx2967.c diff --git a/MAINTAINERS b/MAINTAINERS index 3b9887b3644e..d48d8a238fae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2124,7 +2124,6 @@ F: drivers/gpio/gpio-zx.c F: drivers/i2c/busses/i2c-zx2967.c F: drivers/mmc/host/dw_mmc-zx.* F: drivers/pinctrl/zte/ -F: drivers/reset/reset-zx2967.c F: drivers/soc/zte/ F: drivers/thermal/zx2967_thermal.c F: drivers/watchdog/zx2967_wdt.c diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 9bdb4fe1b03e..de0090c911cd 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -77,14 +77,14 @@ config RESET_PISTACHIO config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI + default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, exclusive register space. Currently this driver supports Altera SoCFPGAs, the RCC reset - controller in STM32 MCUs, and Allwinner SoCs. + controller in STM32 MCUs, Allwinner SoCs, and ZTE's zx2967 family. config RESET_SUNXI bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI @@ -121,12 +121,6 @@ config RESET_UNIPHIER Say Y if you want to control reset signals provided by System Control block, Media I/O block, Peripheral Block. -config RESET_ZX2967 - bool "ZTE ZX2967 Reset Driver" - depends on ARCH_ZX || COMPILE_TEST - help - This enables the reset controller driver for ZTE's zx2967 family. - config RESET_ZYNQ bool "ZYNQ Reset Driver" if COMPILE_TEST default ARCH_ZYNQ diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 98dd1eccc820..48b64d63b75a 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -17,6 +17,5 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o -obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 79c6ae3b743f..2d4f362ef025 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -123,6 +123,8 @@ static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "st,stm32-rcc", }, { .compatible = "allwinner,sun6i-a31-clock-reset", .data = &reset_simple_active_low }, + { .compatible = "zte,zx296718-reset", + .data = &reset_simple_active_low }, { /* sentinel */ }, }; diff --git a/drivers/reset/reset-zx2967.c b/drivers/reset/reset-zx2967.c deleted file mode 100644 index 4f319f7753d4..000000000000 --- a/drivers/reset/reset-zx2967.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * ZTE's zx2967 family reset controller driver - * - * Copyright (C) 2017 ZTE Ltd. - * - * Author: Baoyou Xie - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#include -#include -#include - -struct zx2967_reset { - void __iomem *reg_base; - spinlock_t lock; - struct reset_controller_dev rcdev; -}; - -static int zx2967_reset_act(struct reset_controller_dev *rcdev, - unsigned long id, bool assert) -{ - struct zx2967_reset *reset = NULL; - int bank = id / 32; - int offset = id % 32; - u32 reg; - unsigned long flags; - - reset = container_of(rcdev, struct zx2967_reset, rcdev); - - spin_lock_irqsave(&reset->lock, flags); - - reg = readl_relaxed(reset->reg_base + (bank * 4)); - if (assert) - reg &= ~BIT(offset); - else - reg |= BIT(offset); - writel_relaxed(reg, reset->reg_base + (bank * 4)); - - spin_unlock_irqrestore(&reset->lock, flags); - - return 0; -} - -static int zx2967_reset_assert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - return zx2967_reset_act(rcdev, id, true); -} - -static int zx2967_reset_deassert(struct reset_controller_dev *rcdev, - unsigned long id) -{ - return zx2967_reset_act(rcdev, id, false); -} - -static const struct reset_control_ops zx2967_reset_ops = { - .assert = zx2967_reset_assert, - .deassert = zx2967_reset_deassert, -}; - -static int zx2967_reset_probe(struct platform_device *pdev) -{ - struct zx2967_reset *reset; - struct resource *res; - - reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL); - if (!reset) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - reset->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(reset->reg_base)) - return PTR_ERR(reset->reg_base); - - spin_lock_init(&reset->lock); - - reset->rcdev.owner = THIS_MODULE; - reset->rcdev.nr_resets = resource_size(res) * 8; - reset->rcdev.ops = &zx2967_reset_ops; - reset->rcdev.of_node = pdev->dev.of_node; - - return devm_reset_controller_register(&pdev->dev, &reset->rcdev); -} - -static const struct of_device_id zx2967_reset_dt_ids[] = { - { .compatible = "zte,zx296718-reset", }, - {}, -}; - -static struct platform_driver zx2967_reset_driver = { - .probe = zx2967_reset_probe, - .driver = { - .name = "zx2967-reset", - .of_match_table = zx2967_reset_dt_ids, - }, -}; -builtin_platform_driver(zx2967_reset_driver);