ide: move ide_rate_filter() calls to the upper layer (take 2)

* Move ide_rate_filter() calls from host drivers to IDE core.

* Make ide_rate_filter() static.

* Make 'speed' argument of ->speedproc const.

v2:
* Fix it8213_tune_chipset() comment.

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2007-10-11 23:53:59 +02:00
parent 3160d5416f
commit f212ff28f0
32 changed files with 59 additions and 123 deletions

View File

@ -248,15 +248,10 @@ static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
{
int on = 0, cycle_time = 0, use_dma_info = 0;
/*
* Limit the transfer speed to MW_DMA_2.
*/
xfer_mode = ide_rate_filter(drive, xfer_mode);
switch (xfer_mode) {
case XFER_MW_DMA_2:
cycle_time = 250;

View File

@ -722,12 +722,10 @@ static void tune_cris_ide(ide_drive_t *drive, u8 pio)
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int speed_cris_ide(ide_drive_t *drive, u8 speed)
static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
{
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
speed = ide_rate_filter(drive, speed);
if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
tune_cris_ide(drive, speed - XFER_PIO_0);
return ide_config_drive_speed(drive, speed);

View File

@ -79,7 +79,7 @@ EXPORT_SYMBOL(ide_xfer_verbose);
* TODO: check device PIO capabilities
*/
u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
u8 mode = ide_find_dma_mode(drive, speed);
@ -96,8 +96,6 @@ u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
return min(speed, mode);
}
EXPORT_SYMBOL(ide_rate_filter);
int ide_use_fast_pio(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
@ -364,13 +362,14 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
#ifndef CONFIG_BLK_DEV_IDEDMA
rate = min(rate, (u8) XFER_PIO_4);
#endif
if(HWIF(drive)->speedproc)
return HWIF(drive)->speedproc(drive, rate);
else
ide_hwif_t *hwif = drive->hwif;
if (hwif->speedproc == NULL)
return -1;
rate = ide_rate_filter(drive, rate);
return hwif->speedproc(drive, rate);
}
static void ide_dump_opcode(ide_drive_t *drive)

View File

@ -175,13 +175,11 @@ static void auide_tune_drive(ide_drive_t *drive, byte pio)
ide_config_drive_speed(drive, speed);
}
static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
static int auide_tune_chipset(ide_drive_t *drive, const u8 speed)
{
int mem_sttime;
int mem_stcfg;
speed = ide_rate_filter(drive, speed);
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);

View File

@ -87,12 +87,11 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
return chipset_table->ultra_settings;
}
static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u16 d_conf = 0;
u8 speed = ide_rate_filter(drive, xferspeed);
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
unsigned long flags;
@ -115,11 +114,10 @@ static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return(ide_config_drive_speed(drive, speed));
}
static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;

View File

@ -409,17 +409,16 @@ static u8 ali_udma_filter(ide_drive_t *drive)
/**
* ali15x3_tune_chipset - set up chipset/drive for new speed
* @drive: drive to configure for
* @xferspeed: desired speed
* @speed: desired speed
*
* Configure the hardware for the desired IDE transfer mode.
* We also do the needed drive configuration through helpers
*/
static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;

View File

@ -234,14 +234,12 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
* by upper layers.
*/
static int amd_set_drive(ide_drive_t *drive, u8 speed)
static int amd_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
speed = ide_rate_filter(drive, speed);
if (speed != XFER_PIO_SLOW)
ide_config_drive_speed(drive, speed);

View File

@ -163,23 +163,21 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
/**
* atiixp_tune_chipset - tune a ATIIXP interface
* @drive: IDE drive to tune
* @xferspeed: speed to configure
* @speed: speed to configure
*
* Set a ATIIXP interface channel to the desired speeds. This involves
* requires the right timing data into the ATIIXP configuration space
* then setting the drive parameters appropriately
*/
static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
static int atiixp_speedproc(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 tmp32;
u16 tmp16;
u8 speed, pio;
speed = ide_rate_filter(drive, xferspeed);
u8 pio;
if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
atiixp_tune_pio(drive, speed - XFER_PIO_0);

View File

@ -288,15 +288,13 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
speed = ide_rate_filter(drive, speed);
if (speed >= XFER_SW_DMA_0) {
(void) pci_read_config_byte(dev, pciU, &regU);
regU &= ~(unit ? 0xCA : 0x35);

View File

@ -66,11 +66,10 @@ static struct pio_clocks cs5520_pio_clocks[]={
{1, 2, 1}
};
static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
int pio = speed;
u8 reg;
int controller = drive->dn > 1 ? 1 : 0;

View File

@ -143,13 +143,11 @@ static int cs5530_config_dma(ide_drive_t *drive)
return 1;
}
static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode)
{
unsigned long basereg;
unsigned int reg, timings = 0;
mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/

View File

@ -75,7 +75,7 @@ static unsigned int cs5535_udma_timings[5] =
*
* cs5535_set_speed() configures the chipset to a new speed.
*/
static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
{
u32 reg = 0, dummy;
@ -141,7 +141,6 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
*/
static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
{
speed = ide_rate_filter(drive, speed);
ide_config_drive_speed(drive, speed);
cs5535_set_speed(drive, speed);

View File

@ -43,10 +43,9 @@
#define HPT343_DEBUG_DRIVE_INFO 0
static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;

View File

@ -600,12 +600,11 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
return (*info->settings)[i];
}
static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = drive->dn ? 0x44 : 0x40;
u32 old_itr = 0;
u32 itr_mask, new_itr;
@ -628,12 +627,11 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
return ide_config_drive_speed(drive, speed);
}
static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
u32 itr_mask, new_itr;

View File

@ -115,20 +115,16 @@ static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
/**
* it8213_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
* @speed: speed we want to achieve
*
* Tune the ITE chipset for the desired mode. If we can't achieve
* the desired mode then tune for a lower one, but ultimately
* make the thing work.
* Tune the ITE chipset for the desired mode.
*/
static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = 0x40;
u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;

View File

@ -405,23 +405,19 @@ static int it821x_dma_end(ide_drive_t *drive)
return ret;
}
/**
* it821x_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
* @speed: speed we want to achieve
*
* Tune the ITE chipset for the desired mode. If we can't achieve
* the desired mode then tune for a lower one, but ultimately
* make the thing work.
* Tune the ITE chipset for the desired mode.
*/
static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int it821x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
u8 speed = ide_rate_filter(drive, xferspeed);
switch (speed) {
case XFER_PIO_4:

View File

@ -92,17 +92,14 @@ static void jmicron_tuneproc(ide_drive_t *drive, u8 pio)
/**
* jmicron_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
* @speed: speed we want to achieve
*
* As the JMicron snoops for timings all we actually need to do is
* make sure we don't set an invalid mode. We do need to honour
* the cable detect here.
* set the transfer mode on the device.
*/
static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int jmicron_tune_chipset(ide_drive_t *drive, const u8 speed)
{
u8 speed = ide_rate_filter(drive, xferspeed);
return ide_config_drive_speed(drive, speed);
}

View File

@ -146,14 +146,12 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
};
static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
int err;
speed = ide_rate_filter(drive, speed);
/*
* Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
* automatically set the timing registers based on 100 MHz PLL output.

View File

@ -63,12 +63,11 @@ static const char *pdc_quirk_drives[] = {
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;

View File

@ -221,19 +221,18 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
/**
* piix_tune_chipset - tune a PIIX interface
* @drive: IDE drive to tune
* @xferspeed: speed to configure
* @speed: speed to configure
*
* Set a PIIX interface channel to the desired speeds. This involves
* requires the right timing data into the PIIX configuration space
* then setting the drive parameters appropriately
*/
static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int piix_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;

View File

@ -138,7 +138,7 @@ out:
return mask;
}
static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
@ -146,8 +146,6 @@ static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/

View File

@ -231,16 +231,15 @@ static void scc_tuneproc(ide_drive_t *drive, u8 pio)
/**
* scc_tune_chipset - tune a drive DMA mode
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
* @speed: speed we want to achieve
*
* Load the timing settings for this device mode into the
* controller.
*/
static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
static int scc_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
u8 speed = ide_rate_filter(drive, xferspeed);
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;

View File

@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
}
}
static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
{
static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
@ -153,7 +153,6 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(drive, xferspeed);
u8 unit = (drive->select.b.unit & 0x01);
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;

View File

@ -229,14 +229,12 @@ static void sil_tuneproc(ide_drive_t *drive, u8 pio)
/**
* siimage_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
* @speed: speed we want to achieve
*
* Tune the SII chipset for the desired mode. If we can't achieve
* the desired mode then tune for a lower one, but ultimately
* make the thing work.
* Tune the SII chipset for the desired mode.
*/
static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
{
u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
@ -245,7 +243,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
u8 speed = ide_rate_filter(drive, xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :

View File

@ -531,15 +531,12 @@ static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
(void)sis5513_tune_drive(drive, pio);
}
static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 drive_pci, reg, speed;
u32 regdw;
speed = ide_rate_filter(drive, xferspeed);
u8 drive_pci, reg;
/* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40;

View File

@ -113,7 +113,7 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
/*
* Configure the drive and chipset for a new transfer speed.
*/
static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
{
static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
u16 drv_ctrl;
@ -121,8 +121,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
drive->name, ide_xfer_verbose(speed)));
speed = ide_rate_filter(drive, speed);
switch (speed) {
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:

View File

@ -102,12 +102,11 @@ static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
u8 speed = ide_rate_filter(drive, xferspeed);
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
u16 reg4042, reg44, reg48, reg4a;

View File

@ -13,14 +13,12 @@
#include <linux/pci.h>
#include <linux/ide.h>
static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
u16 mode, scr = hwif->INW(scr_port);
speed = ide_rate_filter(drive, speed);
switch (speed) {
case XFER_UDMA_4: mode = 0x00c0; break;
case XFER_UDMA_3: mode = 0x00b0; break;

View File

@ -40,7 +40,7 @@
#include <linux/ide.h>
#include <linux/init.h>
static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -48,7 +48,6 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
u16 timing = 0;
u32 triflex_timings = 0;
u8 unit = (drive->select.b.unit & 0x01);
u8 speed = ide_rate_filter(drive, xferspeed);
pci_read_config_dword(dev, channel_offset, &triflex_timings);

View File

@ -158,15 +158,13 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
* by upper layers.
*/
static int via_set_drive(ide_drive_t *drive, u8 speed)
static int via_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
struct ide_timing t, p;
unsigned int T, UT;
speed = ide_rate_filter(drive, speed);
if (speed != XFER_PIO_SLOW)
ide_config_drive_speed(drive, speed);

View File

@ -411,7 +411,6 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
static int pmac_ide_tune_chipset(ide_drive_t *drive, u8 speed);
static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@ -920,16 +919,13 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
* our dedicated function is more precise as it uses the drive provided
* cycle time value. We should probably fix this one to deal with that too...
*/
static int
pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
u32 *timings, *timings2;
speed = ide_rate_filter(drive, speed);
if (pmif == NULL)
return 1;

View File

@ -705,7 +705,7 @@ typedef struct hwif_s {
/* routine to tune PIO mode for drives */
void (*tuneproc)(ide_drive_t *, u8);
/* routine to retune DMA modes for drives */
int (*speedproc)(ide_drive_t *, u8);
int (*speedproc)(ide_drive_t *, const u8);
/* tweaks hardware to select drive */
void (*selectproc)(ide_drive_t *);
/* chipset polling based on hba specifics */
@ -1378,7 +1378,6 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
}
/* ide-lib.c */
u8 ide_rate_filter(ide_drive_t *, u8);
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);