From f2329886e567a877cf971d65bbae3c509c546a45 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 25 Oct 2022 17:41:16 +0300 Subject: [PATCH] arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers [ Upstream commit d78a57426e64fc4c61e6189e450a0432d24536ca ] Up until now, the external MDIO controller frequency values relied either on the default ones out of reset or on those setup by u-boot. Let's just properly specify the MDC frequency in the DTS so that even without u-boot's intervention Linux can drive the MDIO bus. Fixes: bbe75af7b092 ("arm64: dts: ls1088a: add external MDIO device nodes") Signed-off-by: Ioana Ciornei Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 605072317243..63441028622a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -758,6 +758,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; }; @@ -767,6 +770,9 @@ little-endian; #address-cells = <1>; #size-cells = <0>; + clock-frequency = <2500000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; status = "disabled"; };