iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

net: caif: Remove unused caif SPI driver

Browse Source 
While chasing in_interrupt() (ab)use in drivers it turned out that the
caif_spi driver has never been in use since the driver was merged 10 years
ago. There never was any matching code which provides a platform device.

The driver has not seen any update (asided of treewide changes and
cleanups) since 8 years and the maintainers vanished from the planet.

So analysing the potential contexts and the (in)correctness of
in_interrupt() usage is just a pointless exercise.

Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Thomas Gleixner 2020-09-29 22:25:11 +02:00 committed by David S. Miller
parent a53b59ece8
commit f2bf88c4af
7 changed files with 0 additions and 1536 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/networking/caif/index.rst
View File

@ -10,4 +10,3 @@ Contents:
linux_caif linux_caif
caif caif
spi_porting

229
Documentation/networking/caif/spi_porting.rst
View File

@ -1,229 +0,0 @@
.. SPDX-License-Identifier: GPL-2.0
================
CAIF SPI porting
================
CAIF SPI basics
===============
Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
Two extra GPIOs have been added in order to negotiate the transfers
between the master and the slave. The minimum requirement for running
CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
Please note that running as a slave implies that you need to keep up
with the master clock. An overrun or underrun event is fatal.
CAIF SPI framework
==================
To make porting as easy as possible, the CAIF SPI has been divided in
two parts. The first part (called the interface part) deals with all
generic functionality such as length framing, SPI frame negotiation
and SPI frame delivery and transmission. The other part is the CAIF
SPI slave device part, which is the module that you have to write if
you want to run SPI CAIF on a new hardware. This part takes care of
the physical hardware, both with regard to SPI and to GPIOs.
- Implementing a CAIF SPI device:
- Functionality provided by the CAIF SPI slave device:
In order to implement a SPI device you will, as a minimum,
need to implement the following
functions:
::
int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
This function is called by the CAIF SPI interface to give
you a chance to set up your hardware to be ready to receive
a stream of data from the master. The xfer structure contains
both physical and logical addresses, as well as the total length
of the transfer in both directions.The dev parameter can be used
to map to different CAIF SPI slave devices.
::
void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
This function is called by the CAIF SPI interface when the output
(SPI_INT) GPIO needs to change state. The boolean value of the xfer
variable indicates whether the GPIO should be asserted (HIGH) or
deasserted (LOW). The dev parameter can be used to map to different CAIF
SPI slave devices.
- Functionality provided by the CAIF SPI interface:
::
void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
This function is called by the CAIF SPI slave device in order to
signal a change of state of the input GPIO (SS) to the interface.
Only active edges are mandatory to be reported.
This function can be called from IRQ context (recommended in order
not to introduce latency). The ifc parameter should be the pointer
returned from the platform probe function in the SPI device structure.
::
void (*xfer_done_cb) (struct cfspi_ifc *ifc);
This function is called by the CAIF SPI slave device in order to
report that a transfer is completed. This function should only be
called once both the transmission and the reception are completed.
This function can be called from IRQ context (recommended in order
not to introduce latency). The ifc parameter should be the pointer
returned from the platform probe function in the SPI device structure.
- Connecting the bits and pieces:
- Filling in the SPI slave device structure:
Connect the necessary callback functions.
Indicate clock speed (used to calculate toggle delays).
Chose a suitable name (helps debugging if you use several CAIF
SPI slave devices).
Assign your private data (can be used to map to your
structure).
- Filling in the SPI slave platform device structure:
Add name of driver to connect to ("cfspi_sspi").
Assign the SPI slave device structure as platform data.
Padding
=======
In order to optimize throughput, a number of SPI padding options are provided.
Padding can be enabled independently for uplink and downlink transfers.
Padding can be enabled for the head, the tail and for the total frame size.
The padding needs to be correctly configured on both sides of the link.
The padding can be changed via module parameters in cfspi_sspi.c or via
the sysfs directory of the cfspi_sspi driver (before device registration).
- CAIF SPI device template::
/*
* Copyright (C) ST-Ericsson AB 2010
* Author: Daniel Martensson / Daniel.Martensson@stericsson.com
* License terms: GNU General Public License (GPL), version 2.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <net/caif/caif_spi.h>
MODULE_LICENSE("GPL");
struct sspi_struct {
struct cfspi_dev sdev;
struct cfspi_xfer *xfer;
};
static struct sspi_struct slave;
static struct platform_device slave_device;
static irqreturn_t sspi_irq(int irq, void *arg)
{
/* You only need to trigger on an edge to the active state of the
* SS signal. Once a edge is detected, the ss_cb() function should be
* called with the parameter assert set to true. It is OK
* (and even advised) to call the ss_cb() function in IRQ context in
* order not to add any delay. */
return IRQ_HANDLED;
}
static void sspi_complete(void *context)
{
/* Normally the DMA or the SPI framework will call you back
* in something similar to this. The only thing you need to
* do is to call the xfer_done_cb() function, providing the pointer
* to the CAIF SPI interface. It is OK to call this function
* from IRQ context. */
}
static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
{
/* Store transfer info. For a normal implementation you should
* set up your DMA here and make sure that you are ready to
* receive the data from the master SPI. */
struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
sspi->xfer = xfer;
return 0;
}
void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
{
/* If xfer is true then you should assert the SPI_INT to indicate to
* the master that you are ready to receive the data from the master
* SPI. If xfer is false then you should de-assert SPI_INT to indicate
* that the transfer is done.
*/
struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
}
static void sspi_release(struct device *dev)
{
/*
* Here you should release your SPI device resources.
*/
}
static int __init sspi_init(void)
{
/* Here you should initialize your SPI device by providing the
* necessary functions, clock speed, name and private data. Once
* done, you can register your device with the
* platform_device_register() function. This function will return
* with the CAIF SPI interface initialized. This is probably also
* the place where you should set up your GPIOs, interrupts and SPI
* resources. */
int res = 0;
/* Initialize slave device. */
slave.sdev.init_xfer = sspi_init_xfer;
slave.sdev.sig_xfer = sspi_sig_xfer;
slave.sdev.clk_mhz = 13;
slave.sdev.priv = &slave;
slave.sdev.name = "spi_sspi";
slave_device.dev.release = sspi_release;
/* Initialize platform device. */
slave_device.name = "cfspi_sspi";
slave_device.dev.platform_data = &slave.sdev;
/* Register platform device. */
res = platform_device_register(&slave_device);
if (res) {
printk(KERN_WARNING "sspi_init: failed to register dev.\n");
return -ENODEV;
}
return res;
}
static void __exit sspi_exit(void)
{
platform_device_del(&slave_device);
}
module_init(sspi_init);
module_exit(sspi_exit);

19
drivers/net/caif/Kconfig
View File

@ -20,25 +20,6 @@ config CAIF_TTY
identified as N_CAIF. When this ldisc is opened from user space identified as N_CAIF. When this ldisc is opened from user space
it will redirect the TTY's traffic into the CAIF stack. it will redirect the TTY's traffic into the CAIF stack.
config CAIF_SPI_SLAVE
tristate "CAIF SPI transport driver for slave interface"
depends on CAIF && HAS_DMA
default n
help
The CAIF Link layer SPI Protocol driver for Slave SPI interface.
This driver implements a platform driver to accommodate for a
platform specific SPI device. A sample CAIF SPI Platform device is
provided in <file:Documentation/networking/caif/spi_porting.rst>.
config CAIF_SPI_SYNC
bool "Next command and length in start of frame"
depends on CAIF_SPI_SLAVE
default n
help
Putting the next command and length in the start of the frame can
help to synchronize to the next transfer in case of over or under-runs.
This option also needs to be enabled on the modem.
config CAIF_HSI config CAIF_HSI
tristate "CAIF HSI transport driver" tristate "CAIF HSI transport driver"
depends on CAIF depends on CAIF

4
drivers/net/caif/Makefile
View File

@ -4,10 +4,6 @@ ccflags-$(CONFIG_CAIF_DEBUG) := -DDEBUG
# Serial interface # Serial interface
obj-$(CONFIG_CAIF_TTY) += caif_serial.o obj-$(CONFIG_CAIF_TTY) += caif_serial.o
# SPI slave physical interfaces module
cfspi_slave-objs := caif_spi.o caif_spi_slave.o
obj-$(CONFIG_CAIF_SPI_SLAVE) += cfspi_slave.o
# HSI interface # HSI interface
obj-$(CONFIG_CAIF_HSI) += caif_hsi.o obj-$(CONFIG_CAIF_HSI) += caif_hsi.o

874
drivers/net/caif/caif_spi.c
View File

@ -1,874 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson AB 2010
* Author: Daniel Martensson
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/debugfs.h>
#include <linux/if_arp.h>
#include <net/caif/caif_layer.h>
#include <net/caif/caif_spi.h>
#ifndef CONFIG_CAIF_SPI_SYNC
#define FLAVOR "Flavour: Vanilla.\n"
#else
#define FLAVOR "Flavour: Master CMD&LEN at start.\n"
#endif /* CONFIG_CAIF_SPI_SYNC */
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Daniel Martensson");
MODULE_DESCRIPTION("CAIF SPI driver");
/* Returns the number of padding bytes for alignment. */
#define PAD_POW2(x, pow) ((((x)&((pow)-1))==0) ? 0 : (((pow)-((x)&((pow)-1)))))
static bool spi_loop;
module_param(spi_loop, bool, 0444);
MODULE_PARM_DESC(spi_loop, "SPI running in loopback mode.");
/* SPI frame alignment. */
module_param(spi_frm_align, int, 0444);
MODULE_PARM_DESC(spi_frm_align, "SPI frame alignment.");
/*
* SPI padding options.
* Warning: must be a base of 2 (& operation used) and can not be zero !
*/
module_param(spi_up_head_align, int, 0444);
MODULE_PARM_DESC(spi_up_head_align, "SPI uplink head alignment.");
module_param(spi_up_tail_align, int, 0444);
MODULE_PARM_DESC(spi_up_tail_align, "SPI uplink tail alignment.");
module_param(spi_down_head_align, int, 0444);
MODULE_PARM_DESC(spi_down_head_align, "SPI downlink head alignment.");
module_param(spi_down_tail_align, int, 0444);
MODULE_PARM_DESC(spi_down_tail_align, "SPI downlink tail alignment.");
#ifdef CONFIG_ARM
#define BYTE_HEX_FMT "%02X"
#else
#define BYTE_HEX_FMT "%02hhX"
#endif
#define SPI_MAX_PAYLOAD_SIZE 4096
/*
* Threshold values for the SPI packet queue. Flowcontrol will be asserted
* when the number of packets exceeds HIGH_WATER_MARK. It will not be
* deasserted before the number of packets drops below LOW_WATER_MARK.
*/
#define LOW_WATER_MARK 100
#define HIGH_WATER_MARK (LOW_WATER_MARK*5)
#ifndef CONFIG_HAS_DMA
/*
* We sometimes use UML for debugging, but it cannot handle
* dma_alloc_coherent so we have to wrap it.
*/
static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr)
{
return kmalloc(SPI_DMA_BUF_LEN, GFP_KERNEL);
}
static inline void dma_free(struct cfspi *cfspi, void *cpu_addr,
dma_addr_t handle)
{
kfree(cpu_addr);
}
#else
static inline void *dma_alloc(struct cfspi *cfspi, dma_addr_t *daddr)
{
return dma_alloc_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, daddr,
GFP_KERNEL);
}
static inline void dma_free(struct cfspi *cfspi, void *cpu_addr,
dma_addr_t handle)
{
dma_free_coherent(&cfspi->pdev->dev, SPI_DMA_BUF_LEN, cpu_addr, handle);
}
#endif /* CONFIG_HAS_DMA */
#ifdef CONFIG_DEBUG_FS
#define DEBUGFS_BUF_SIZE 4096
static struct dentry *dbgfs_root;
static inline void driver_debugfs_create(void)
{
dbgfs_root = debugfs_create_dir(cfspi_spi_driver.driver.name, NULL);
}
static inline void driver_debugfs_remove(void)
{
debugfs_remove(dbgfs_root);
}
static inline void dev_debugfs_rem(struct cfspi *cfspi)
{
debugfs_remove(cfspi->dbgfs_frame);
debugfs_remove(cfspi->dbgfs_state);
debugfs_remove(cfspi->dbgfs_dir);
}
static ssize_t dbgfs_state(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char *buf;
int len = 0;
ssize_t size;
struct cfspi *cfspi = file->private_data;
buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL);
if (!buf)
return 0;
/* Print out debug information. */
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"CAIF SPI debug information:\n");
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len), FLAVOR);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"STATE: %d\n", cfspi->dbg_state);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Previous CMD: 0x%x\n", cfspi->pcmd);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Current CMD: 0x%x\n", cfspi->cmd);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Previous TX len: %d\n", cfspi->tx_ppck_len);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Previous RX len: %d\n", cfspi->rx_ppck_len);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Current TX len: %d\n", cfspi->tx_cpck_len);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Current RX len: %d\n", cfspi->rx_cpck_len);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Next TX len: %d\n", cfspi->tx_npck_len);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Next RX len: %d\n", cfspi->rx_npck_len);
if (len > DEBUGFS_BUF_SIZE)
len = DEBUGFS_BUF_SIZE;
size = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return size;
}
static ssize_t print_frame(char *buf, size_t size, char *frm,
size_t count, size_t cut)
{
int len = 0;
int i;
for (i = 0; i < count; i++) {
len += scnprintf((buf + len), (size - len),
"[0x" BYTE_HEX_FMT "]",
frm[i]);
if ((i == cut) && (count > (cut * 2))) {
/* Fast forward. */
i = count - cut;
len += scnprintf((buf + len), (size - len),
"--- %zu bytes skipped ---\n",
count - (cut * 2));
}
if ((!(i % 10)) && i) {
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"\n");
}
}
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len), "\n");
return len;
}
static ssize_t dbgfs_frame(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char *buf;
int len = 0;
ssize_t size;
struct cfspi *cfspi;
cfspi = file->private_data;
buf = kzalloc(DEBUGFS_BUF_SIZE, GFP_KERNEL);
if (!buf)
return 0;
/* Print out debug information. */
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Current frame:\n");
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Tx data (Len: %d):\n", cfspi->tx_cpck_len);
len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len),
cfspi->xfer.va_tx[0],
(cfspi->tx_cpck_len + SPI_CMD_SZ), 100);
len += scnprintf((buf + len), (DEBUGFS_BUF_SIZE - len),
"Rx data (Len: %d):\n", cfspi->rx_cpck_len);
len += print_frame((buf + len), (DEBUGFS_BUF_SIZE - len),
cfspi->xfer.va_rx,
(cfspi->rx_cpck_len + SPI_CMD_SZ), 100);
size = simple_read_from_buffer(user_buf, count, ppos, buf, len);
kfree(buf);
return size;
}
static const struct file_operations dbgfs_state_fops = {
.open = simple_open,
.read = dbgfs_state,
.owner = THIS_MODULE
};
static const struct file_operations dbgfs_frame_fops = {
.open = simple_open,
.read = dbgfs_frame,
.owner = THIS_MODULE
};
static inline void dev_debugfs_add(struct cfspi *cfspi)
{
cfspi->dbgfs_dir = debugfs_create_dir(cfspi->pdev->name, dbgfs_root);
cfspi->dbgfs_state = debugfs_create_file("state", 0444,
cfspi->dbgfs_dir, cfspi,
&dbgfs_state_fops);
cfspi->dbgfs_frame = debugfs_create_file("frame", 0444,
cfspi->dbgfs_dir, cfspi,
&dbgfs_frame_fops);
}
inline void cfspi_dbg_state(struct cfspi *cfspi, int state)
{
cfspi->dbg_state = state;
};
#else
static inline void driver_debugfs_create(void)
{
}
static inline void driver_debugfs_remove(void)
{
}
static inline void dev_debugfs_add(struct cfspi *cfspi)
{
}
static inline void dev_debugfs_rem(struct cfspi *cfspi)
{
}
inline void cfspi_dbg_state(struct cfspi *cfspi, int state)
{
}
#endif /* CONFIG_DEBUG_FS */
static LIST_HEAD(cfspi_list);
static spinlock_t cfspi_list_lock;
/* SPI uplink head alignment. */
static ssize_t up_head_align_show(struct device_driver *driver, char *buf)
{
return sprintf(buf, "%d\n", spi_up_head_align);
}
static DRIVER_ATTR_RO(up_head_align);
/* SPI uplink tail alignment. */
static ssize_t up_tail_align_show(struct device_driver *driver, char *buf)
{
return sprintf(buf, "%d\n", spi_up_tail_align);
}
static DRIVER_ATTR_RO(up_tail_align);
/* SPI downlink head alignment. */
static ssize_t down_head_align_show(struct device_driver *driver, char *buf)
{
return sprintf(buf, "%d\n", spi_down_head_align);
}
static DRIVER_ATTR_RO(down_head_align);
/* SPI downlink tail alignment. */
static ssize_t down_tail_align_show(struct device_driver *driver, char *buf)
{
return sprintf(buf, "%d\n", spi_down_tail_align);
}
static DRIVER_ATTR_RO(down_tail_align);
/* SPI frame alignment. */
static ssize_t frame_align_show(struct device_driver *driver, char *buf)
{
return sprintf(buf, "%d\n", spi_frm_align);
}
static DRIVER_ATTR_RO(frame_align);
int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len)
{
u8 *dst = buf;
caif_assert(buf);
if (cfspi->slave && !cfspi->slave_talked)
cfspi->slave_talked = true;
do {
struct sk_buff *skb;
struct caif_payload_info *info;
int spad = 0;
int epad;
skb = skb_dequeue(&cfspi->chead);
if (!skb)
break;
/*
* Calculate length of frame including SPI padding.
* The payload position is found in the control buffer.
*/
info = (struct caif_payload_info *)&skb->cb;
/*
* Compute head offset i.e. number of bytes to add to
* get the start of the payload aligned.
*/
if (spi_up_head_align > 1) {
spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
*dst = (u8)(spad - 1);
dst += spad;
}
/* Copy in CAIF frame. */
skb_copy_bits(skb, 0, dst, skb->len);
dst += skb->len;
cfspi->ndev->stats.tx_packets++;
cfspi->ndev->stats.tx_bytes += skb->len;
/*
* Compute tail offset i.e. number of bytes to add to
* get the complete CAIF frame aligned.
*/
epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
dst += epad;
dev_kfree_skb(skb);
} while ((dst - buf) < len);
return dst - buf;
}
int cfspi_xmitlen(struct cfspi *cfspi)
{
struct sk_buff *skb = NULL;
int frm_len = 0;
int pkts = 0;
/*
* Decommit previously committed frames.
* skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead)
*/
while (skb_peek(&cfspi->chead)) {
skb = skb_dequeue_tail(&cfspi->chead);
skb_queue_head(&cfspi->qhead, skb);
}
do {
struct caif_payload_info *info = NULL;
int spad = 0;
int epad = 0;
skb = skb_dequeue(&cfspi->qhead);
if (!skb)
break;
/*
* Calculate length of frame including SPI padding.
* The payload position is found in the control buffer.
*/
info = (struct caif_payload_info *)&skb->cb;
/*
* Compute head offset i.e. number of bytes to add to
* get the start of the payload aligned.
*/
if (spi_up_head_align > 1)
spad = 1 + PAD_POW2((info->hdr_len + 1), spi_up_head_align);
/*
* Compute tail offset i.e. number of bytes to add to
* get the complete CAIF frame aligned.
*/
epad = PAD_POW2((skb->len + spad), spi_up_tail_align);
if ((skb->len + spad + epad + frm_len) <= CAIF_MAX_SPI_FRAME) {
skb_queue_tail(&cfspi->chead, skb);
pkts++;
frm_len += skb->len + spad + epad;
} else {
/* Put back packet. */
skb_queue_head(&cfspi->qhead, skb);
break;
}
} while (pkts <= CAIF_MAX_SPI_PKTS);
/*
* Send flow on if previously sent flow off
* and now go below the low water mark
*/
if (cfspi->flow_off_sent && cfspi->qhead.qlen < cfspi->qd_low_mark &&
cfspi->cfdev.flowctrl) {
cfspi->flow_off_sent = 0;
cfspi->cfdev.flowctrl(cfspi->ndev, 1);
}
return frm_len;
}
static void cfspi_ss_cb(bool assert, struct cfspi_ifc *ifc)
{
struct cfspi *cfspi = (struct cfspi *)ifc->priv;
/*
* The slave device is the master on the link. Interrupts before the
* slave has transmitted are considered spurious.
*/
if (cfspi->slave && !cfspi->slave_talked) {
printk(KERN_WARNING "CFSPI: Spurious SS interrupt.\n");
return;
}
if (!in_interrupt())
spin_lock(&cfspi->lock);
if (assert) {
set_bit(SPI_SS_ON, &cfspi->state);
set_bit(SPI_XFER, &cfspi->state);
} else {
set_bit(SPI_SS_OFF, &cfspi->state);
}
if (!in_interrupt())
spin_unlock(&cfspi->lock);
/* Wake up the xfer thread. */
if (assert)
wake_up_interruptible(&cfspi->wait);
}
static void cfspi_xfer_done_cb(struct cfspi_ifc *ifc)
{
struct cfspi *cfspi = (struct cfspi *)ifc->priv;
/* Transfer done, complete work queue */
complete(&cfspi->comp);
}
static netdev_tx_t cfspi_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct cfspi *cfspi = NULL;
unsigned long flags;
if (!dev)
return -EINVAL;
cfspi = netdev_priv(dev);
skb_queue_tail(&cfspi->qhead, skb);
spin_lock_irqsave(&cfspi->lock, flags);
if (!test_and_set_bit(SPI_XFER, &cfspi->state)) {
/* Wake up xfer thread. */
wake_up_interruptible(&cfspi->wait);
}
spin_unlock_irqrestore(&cfspi->lock, flags);
/* Send flow off if number of bytes is above high water mark */
if (!cfspi->flow_off_sent &&
cfspi->qhead.qlen > cfspi->qd_high_mark &&
cfspi->cfdev.flowctrl) {
cfspi->flow_off_sent = 1;
cfspi->cfdev.flowctrl(cfspi->ndev, 0);
}
return NETDEV_TX_OK;
}
int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len)
{
u8 *src = buf;
caif_assert(buf != NULL);
do {
int res;
struct sk_buff *skb = NULL;
int spad = 0;
int epad = 0;
int pkt_len = 0;
/*
* Compute head offset i.e. number of bytes added to
* get the start of the payload aligned.
*/
if (spi_down_head_align > 1) {
spad = 1 + *src;
src += spad;
}
/* Read length of CAIF frame (little endian). */
pkt_len = *src;
pkt_len |= ((*(src+1)) << 8) & 0xFF00;
pkt_len += 2; /* Add FCS fields. */
/* Get a suitable caif packet and copy in data. */
skb = netdev_alloc_skb(cfspi->ndev, pkt_len + 1);
caif_assert(skb != NULL);
skb_put_data(skb, src, pkt_len);
src += pkt_len;
skb->protocol = htons(ETH_P_CAIF);
skb_reset_mac_header(skb);
/*
* Push received packet up the stack.
*/
if (!spi_loop)
res = netif_rx_ni(skb);
else
res = cfspi_xmit(skb, cfspi->ndev);
if (!res) {
cfspi->ndev->stats.rx_packets++;
cfspi->ndev->stats.rx_bytes += pkt_len;
} else
cfspi->ndev->stats.rx_dropped++;
/*
* Compute tail offset i.e. number of bytes added to
* get the complete CAIF frame aligned.
*/
epad = PAD_POW2((pkt_len + spad), spi_down_tail_align);
src += epad;
} while ((src - buf) < len);
return src - buf;
}
static int cfspi_open(struct net_device *dev)
{
netif_wake_queue(dev);
return 0;
}
static int cfspi_close(struct net_device *dev)
{
netif_stop_queue(dev);
return 0;
}
static int cfspi_init(struct net_device *dev)
{
int res = 0;
struct cfspi *cfspi = netdev_priv(dev);
/* Set flow info. */
cfspi->flow_off_sent = 0;
cfspi->qd_low_mark = LOW_WATER_MARK;
cfspi->qd_high_mark = HIGH_WATER_MARK;
/* Set slave info. */
if (!strncmp(cfspi_spi_driver.driver.name, "cfspi_sspi", 10)) {
cfspi->slave = true;
cfspi->slave_talked = false;
} else {
cfspi->slave = false;
cfspi->slave_talked = false;
}
/* Allocate DMA buffers. */
cfspi->xfer.va_tx[0] = dma_alloc(cfspi, &cfspi->xfer.pa_tx[0]);
if (!cfspi->xfer.va_tx[0]) {
res = -ENODEV;
goto err_dma_alloc_tx_0;
}
cfspi->xfer.va_rx = dma_alloc(cfspi, &cfspi->xfer.pa_rx);
if (!cfspi->xfer.va_rx) {
res = -ENODEV;
goto err_dma_alloc_rx;
}
/* Initialize the work queue. */
INIT_WORK(&cfspi->work, cfspi_xfer);
/* Initialize spin locks. */
spin_lock_init(&cfspi->lock);
/* Initialize flow control state. */
cfspi->flow_stop = false;
/* Initialize wait queue. */
init_waitqueue_head(&cfspi->wait);
/* Create work thread. */
cfspi->wq = create_singlethread_workqueue(dev->name);
if (!cfspi->wq) {
printk(KERN_WARNING "CFSPI: failed to create work queue.\n");
res = -ENODEV;
goto err_create_wq;
}
/* Initialize work queue. */
init_completion(&cfspi->comp);
/* Create debugfs entries. */
dev_debugfs_add(cfspi);
/* Set up the ifc. */
cfspi->ifc.ss_cb = cfspi_ss_cb;
cfspi->ifc.xfer_done_cb = cfspi_xfer_done_cb;
cfspi->ifc.priv = cfspi;
/* Add CAIF SPI device to list. */
spin_lock(&cfspi_list_lock);
list_add_tail(&cfspi->list, &cfspi_list);
spin_unlock(&cfspi_list_lock);
/* Schedule the work queue. */
queue_work(cfspi->wq, &cfspi->work);
return 0;
err_create_wq:
dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx);
err_dma_alloc_rx:
dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]);
err_dma_alloc_tx_0:
return res;
}
static void cfspi_uninit(struct net_device *dev)
{
struct cfspi *cfspi = netdev_priv(dev);
/* Remove from list. */
spin_lock(&cfspi_list_lock);
list_del(&cfspi->list);
spin_unlock(&cfspi_list_lock);
cfspi->ndev = NULL;
/* Free DMA buffers. */
dma_free(cfspi, cfspi->xfer.va_rx, cfspi->xfer.pa_rx);
dma_free(cfspi, cfspi->xfer.va_tx[0], cfspi->xfer.pa_tx[0]);
set_bit(SPI_TERMINATE, &cfspi->state);
wake_up_interruptible(&cfspi->wait);
destroy_workqueue(cfspi->wq);
/* Destroy debugfs directory and files. */
dev_debugfs_rem(cfspi);
return;
}
static const struct net_device_ops cfspi_ops = {
.ndo_open = cfspi_open,
.ndo_stop = cfspi_close,
.ndo_init = cfspi_init,
.ndo_uninit = cfspi_uninit,
.ndo_start_xmit = cfspi_xmit
};
static void cfspi_setup(struct net_device *dev)
{
struct cfspi *cfspi = netdev_priv(dev);
dev->features = 0;
dev->netdev_ops = &cfspi_ops;
dev->type = ARPHRD_CAIF;
dev->flags = IFF_NOARP | IFF_POINTOPOINT;
dev->priv_flags |= IFF_NO_QUEUE;
dev->mtu = SPI_MAX_PAYLOAD_SIZE;
dev->needs_free_netdev = true;
skb_queue_head_init(&cfspi->qhead);
skb_queue_head_init(&cfspi->chead);
cfspi->cfdev.link_select = CAIF_LINK_HIGH_BANDW;
cfspi->cfdev.use_frag = false;
cfspi->cfdev.use_stx = false;
cfspi->cfdev.use_fcs = false;
cfspi->ndev = dev;
}
int cfspi_spi_probe(struct platform_device *pdev)
{
struct cfspi *cfspi = NULL;
struct net_device *ndev;
struct cfspi_dev *dev;
int res;
dev = (struct cfspi_dev *)pdev->dev.platform_data;
if (!dev)
return -ENODEV;
ndev = alloc_netdev(sizeof(struct cfspi), "cfspi%d",
NET_NAME_UNKNOWN, cfspi_setup);
if (!ndev)
return -ENOMEM;
cfspi = netdev_priv(ndev);
netif_stop_queue(ndev);
cfspi->ndev = ndev;
cfspi->pdev = pdev;
/* Assign the SPI device. */
cfspi->dev = dev;
/* Assign the device ifc to this SPI interface. */
dev->ifc = &cfspi->ifc;
/* Register network device. */
res = register_netdev(ndev);
if (res) {
printk(KERN_ERR "CFSPI: Reg. error: %d.\n", res);
goto err_net_reg;
}
return res;
err_net_reg:
free_netdev(ndev);
return res;
}
int cfspi_spi_remove(struct platform_device *pdev)
{
/* Everything is done in cfspi_uninit(). */
return 0;
}
static void __exit cfspi_exit_module(void)
{
struct list_head *list_node;
struct list_head *n;
struct cfspi *cfspi = NULL;
list_for_each_safe(list_node, n, &cfspi_list) {
cfspi = list_entry(list_node, struct cfspi, list);
unregister_netdev(cfspi->ndev);
}
/* Destroy sysfs files. */
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_up_head_align);
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_up_tail_align);
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_down_head_align);
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_down_tail_align);
driver_remove_file(&cfspi_spi_driver.driver, &driver_attr_frame_align);
/* Unregister platform driver. */
platform_driver_unregister(&cfspi_spi_driver);
/* Destroy debugfs root directory. */
driver_debugfs_remove();
}
static int __init cfspi_init_module(void)
{
int result;
/* Initialize spin lock. */
spin_lock_init(&cfspi_list_lock);
/* Register platform driver. */
result = platform_driver_register(&cfspi_spi_driver);
if (result) {
printk(KERN_ERR "Could not register platform SPI driver.\n");
goto err_dev_register;
}
/* Create sysfs files. */
result =
driver_create_file(&cfspi_spi_driver.driver,
&driver_attr_up_head_align);
if (result) {
printk(KERN_ERR "Sysfs creation failed 1.\n");
goto err_create_up_head_align;
}
result =
driver_create_file(&cfspi_spi_driver.driver,
&driver_attr_up_tail_align);
if (result) {
printk(KERN_ERR "Sysfs creation failed 2.\n");
goto err_create_up_tail_align;
}
result =
driver_create_file(&cfspi_spi_driver.driver,
&driver_attr_down_head_align);
if (result) {
printk(KERN_ERR "Sysfs creation failed 3.\n");
goto err_create_down_head_align;
}
result =
driver_create_file(&cfspi_spi_driver.driver,
&driver_attr_down_tail_align);
if (result) {
printk(KERN_ERR "Sysfs creation failed 4.\n");
goto err_create_down_tail_align;
}
result =
driver_create_file(&cfspi_spi_driver.driver,
&driver_attr_frame_align);
if (result) {
printk(KERN_ERR "Sysfs creation failed 5.\n");
goto err_create_frame_align;
}
driver_debugfs_create();
return result;
err_create_frame_align:
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_down_tail_align);
err_create_down_tail_align:
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_down_head_align);
err_create_down_head_align:
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_up_tail_align);
err_create_up_tail_align:
driver_remove_file(&cfspi_spi_driver.driver,
&driver_attr_up_head_align);
err_create_up_head_align:
platform_driver_unregister(&cfspi_spi_driver);
err_dev_register:
return result;
}
module_init(cfspi_init_module);
module_exit(cfspi_exit_module);

254
drivers/net/caif/caif_spi_slave.c
View File

@ -1,254 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson AB 2010
* Author: Daniel Martensson
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include <linux/semaphore.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/debugfs.h>
#include <net/caif/caif_spi.h>
#ifndef CONFIG_CAIF_SPI_SYNC
#define SPI_DATA_POS 0
static inline int forward_to_spi_cmd(struct cfspi *cfspi)
{
return cfspi->rx_cpck_len;
}
#else
#define SPI_DATA_POS SPI_CMD_SZ
static inline int forward_to_spi_cmd(struct cfspi *cfspi)
{
return 0;
}
#endif
int spi_frm_align = 2;
/*
* SPI padding options.
* Warning: must be a base of 2 (& operation used) and can not be zero !
*/
int spi_up_head_align = 1 << 1;
int spi_up_tail_align = 1 << 0;
int spi_down_head_align = 1 << 2;
int spi_down_tail_align = 1 << 1;
#ifdef CONFIG_DEBUG_FS
static inline void debugfs_store_prev(struct cfspi *cfspi)
{
/* Store previous command for debugging reasons.*/
cfspi->pcmd = cfspi->cmd;
/* Store previous transfer. */
cfspi->tx_ppck_len = cfspi->tx_cpck_len;
cfspi->rx_ppck_len = cfspi->rx_cpck_len;
}
#else
static inline void debugfs_store_prev(struct cfspi *cfspi)
{
}
#endif
void cfspi_xfer(struct work_struct *work)
{
struct cfspi *cfspi;
u8 *ptr = NULL;
unsigned long flags;
int ret;
cfspi = container_of(work, struct cfspi, work);
/* Initialize state. */
cfspi->cmd = SPI_CMD_EOT;
for (;;) {
cfspi_dbg_state(cfspi, CFSPI_STATE_WAITING);
/* Wait for master talk or transmit event. */
wait_event_interruptible(cfspi->wait,
test_bit(SPI_XFER, &cfspi->state) ||
test_bit(SPI_TERMINATE, &cfspi->state));
if (test_bit(SPI_TERMINATE, &cfspi->state))
return;
#if CFSPI_DBG_PREFILL
/* Prefill buffers for easier debugging. */
memset(cfspi->xfer.va_tx, 0xFF, SPI_DMA_BUF_LEN);
memset(cfspi->xfer.va_rx, 0xFF, SPI_DMA_BUF_LEN);
#endif /* CFSPI_DBG_PREFILL */
cfspi_dbg_state(cfspi, CFSPI_STATE_AWAKE);
/* Check whether we have a committed frame. */
if (cfspi->tx_cpck_len) {
int len;
cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT);
/* Copy committed SPI frames after the SPI indication. */
ptr = (u8 *) cfspi->xfer.va_tx;
ptr += SPI_IND_SZ;
len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len);
WARN_ON(len != cfspi->tx_cpck_len);
}
cfspi_dbg_state(cfspi, CFSPI_STATE_GET_NEXT);
/* Get length of next frame to commit. */
cfspi->tx_npck_len = cfspi_xmitlen(cfspi);
WARN_ON(cfspi->tx_npck_len > SPI_DMA_BUF_LEN);
/*
* Add indication and length at the beginning of the frame,
* using little endian.
*/
ptr = (u8 *) cfspi->xfer.va_tx;
*ptr++ = SPI_CMD_IND;
*ptr++ = (SPI_CMD_IND & 0xFF00) >> 8;
*ptr++ = cfspi->tx_npck_len & 0x00FF;
*ptr++ = (cfspi->tx_npck_len & 0xFF00) >> 8;
/* Calculate length of DMAs. */
cfspi->xfer.tx_dma_len = cfspi->tx_cpck_len + SPI_IND_SZ;
cfspi->xfer.rx_dma_len = cfspi->rx_cpck_len + SPI_CMD_SZ;
/* Add SPI TX frame alignment padding, if necessary. */
if (cfspi->tx_cpck_len &&
(cfspi->xfer.tx_dma_len % spi_frm_align)) {
cfspi->xfer.tx_dma_len += spi_frm_align -
(cfspi->xfer.tx_dma_len % spi_frm_align);
}
/* Add SPI RX frame alignment padding, if necessary. */
if (cfspi->rx_cpck_len &&
(cfspi->xfer.rx_dma_len % spi_frm_align)) {
cfspi->xfer.rx_dma_len += spi_frm_align -
(cfspi->xfer.rx_dma_len % spi_frm_align);
}
cfspi_dbg_state(cfspi, CFSPI_STATE_INIT_XFER);
/* Start transfer. */
ret = cfspi->dev->init_xfer(&cfspi->xfer, cfspi->dev);
WARN_ON(ret);
cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_ACTIVE);
/*
* TODO: We might be able to make an assumption if this is the
* first loop. Make sure that minimum toggle time is respected.
*/
udelay(MIN_TRANSITION_TIME_USEC);
cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);
/* Signal that we are ready to receive data. */
cfspi->dev->sig_xfer(true, cfspi->dev);
cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE);
/* Wait for transfer completion. */
wait_for_completion(&cfspi->comp);
cfspi_dbg_state(cfspi, CFSPI_STATE_XFER_DONE);
if (cfspi->cmd == SPI_CMD_EOT) {
/*
* Clear the master talk bit. A xfer is always at
* least two bursts.
*/
clear_bit(SPI_SS_ON, &cfspi->state);
}
cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_INACTIVE);
/* Make sure that the minimum toggle time is respected. */
if (SPI_XFER_TIME_USEC(cfspi->xfer.tx_dma_len,
cfspi->dev->clk_mhz) <
MIN_TRANSITION_TIME_USEC) {
udelay(MIN_TRANSITION_TIME_USEC -
SPI_XFER_TIME_USEC
(cfspi->xfer.tx_dma_len, cfspi->dev->clk_mhz));
}
cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_INACTIVE);
/* De-assert transfer signal. */
cfspi->dev->sig_xfer(false, cfspi->dev);
/* Check whether we received a CAIF packet. */
if (cfspi->rx_cpck_len) {
int len;
cfspi_dbg_state(cfspi, CFSPI_STATE_DELIVER_PKT);
/* Parse SPI frame. */
ptr = ((u8 *)(cfspi->xfer.va_rx + SPI_DATA_POS));
len = cfspi_rxfrm(cfspi, ptr, cfspi->rx_cpck_len);
WARN_ON(len != cfspi->rx_cpck_len);
}
/* Check the next SPI command and length. */
ptr = (u8 *) cfspi->xfer.va_rx;
ptr += forward_to_spi_cmd(cfspi);
cfspi->cmd = *ptr++;
cfspi->cmd |= ((*ptr++) << 8) & 0xFF00;
cfspi->rx_npck_len = *ptr++;
cfspi->rx_npck_len |= ((*ptr++) << 8) & 0xFF00;
WARN_ON(cfspi->rx_npck_len > SPI_DMA_BUF_LEN);
WARN_ON(cfspi->cmd > SPI_CMD_EOT);
debugfs_store_prev(cfspi);
/* Check whether the master issued an EOT command. */
if (cfspi->cmd == SPI_CMD_EOT) {
/* Reset state. */
cfspi->tx_cpck_len = 0;
cfspi->rx_cpck_len = 0;
} else {
/* Update state. */
cfspi->tx_cpck_len = cfspi->tx_npck_len;
cfspi->rx_cpck_len = cfspi->rx_npck_len;
}
/*
* Check whether we need to clear the xfer bit.
* Spin lock needed for packet insertion.
* Test and clear of different bits
* are not supported.
*/
spin_lock_irqsave(&cfspi->lock, flags);
if (cfspi->cmd == SPI_CMD_EOT && !cfspi_xmitlen(cfspi)
&& !test_bit(SPI_SS_ON, &cfspi->state))
clear_bit(SPI_XFER, &cfspi->state);
spin_unlock_irqrestore(&cfspi->lock, flags);
}
}
struct platform_driver cfspi_spi_driver = {
.probe = cfspi_spi_probe,
.remove = cfspi_spi_remove,
.driver = {
.name = "cfspi_sspi",
.owner = THIS_MODULE,
},
};

155
include/net/caif/caif_spi.h
View File

@ -1,155 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) ST-Ericsson AB 2010
* Author: Daniel Martensson / Daniel.Martensson@stericsson.com
*/
#ifndef CAIF_SPI_H_
#define CAIF_SPI_H_
#include <net/caif/caif_device.h>
#define SPI_CMD_WR 0x00
#define SPI_CMD_RD 0x01
#define SPI_CMD_EOT 0x02
#define SPI_CMD_IND 0x04
#define SPI_DMA_BUF_LEN 8192
#define WL_SZ 2 /* 16 bits. */
#define SPI_CMD_SZ 4 /* 32 bits. */
#define SPI_IND_SZ 4 /* 32 bits. */
#define SPI_XFER 0
#define SPI_SS_ON 1
#define SPI_SS_OFF 2
#define SPI_TERMINATE 3
/* Minimum time between different levels is 50 microseconds. */
#define MIN_TRANSITION_TIME_USEC 50
/* Defines for calculating duration of SPI transfers for a particular
* number of bytes.
*/
#define SPI_MASTER_CLK_MHZ 13
#define SPI_XFER_TIME_USEC(bytes, clk) (((bytes) * 8) / clk)
/* Normally this should be aligned on the modem in order to benefit from full
* duplex transfers. However a size of 8188 provokes errors when running with
* the modem. These errors occur when packet sizes approaches 4 kB of data.
*/
#define CAIF_MAX_SPI_FRAME 4092
/* Maximum number of uplink CAIF frames that can reside in the same SPI frame.
* This number should correspond with the modem setting. The application side
* CAIF accepts any number of embedded downlink CAIF frames.
*/
#define CAIF_MAX_SPI_PKTS 9
/* Decides if SPI buffers should be prefilled with 0xFF pattern for easier
* debugging. Both TX and RX buffers will be filled before the transfer.
*/
#define CFSPI_DBG_PREFILL 0
/* Structure describing a SPI transfer. */
struct cfspi_xfer {
u16 tx_dma_len;
u16 rx_dma_len;
void *va_tx[2];
dma_addr_t pa_tx[2];
void *va_rx;
dma_addr_t pa_rx;
};
/* Structure implemented by the SPI interface. */
struct cfspi_ifc {
void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
void (*xfer_done_cb) (struct cfspi_ifc *ifc);
void *priv;
};
/* Structure implemented by SPI clients. */
struct cfspi_dev {
int (*init_xfer) (struct cfspi_xfer *xfer, struct cfspi_dev *dev);
void (*sig_xfer) (bool xfer, struct cfspi_dev *dev);
struct cfspi_ifc *ifc;
char *name;
u32 clk_mhz;
void *priv;
};
/* Enumeration describing the CAIF SPI state. */
enum cfspi_state {
CFSPI_STATE_WAITING = 0,
CFSPI_STATE_AWAKE,
CFSPI_STATE_FETCH_PKT,
CFSPI_STATE_GET_NEXT,
CFSPI_STATE_INIT_XFER,
CFSPI_STATE_WAIT_ACTIVE,
CFSPI_STATE_SIG_ACTIVE,
CFSPI_STATE_WAIT_XFER_DONE,
CFSPI_STATE_XFER_DONE,
CFSPI_STATE_WAIT_INACTIVE,
CFSPI_STATE_SIG_INACTIVE,
CFSPI_STATE_DELIVER_PKT,
CFSPI_STATE_MAX,
};
/* Structure implemented by SPI physical interfaces. */
struct cfspi {
struct caif_dev_common cfdev;
struct net_device *ndev;
struct platform_device *pdev;
struct sk_buff_head qhead;
struct sk_buff_head chead;
u16 cmd;
u16 tx_cpck_len;
u16 tx_npck_len;
u16 rx_cpck_len;
u16 rx_npck_len;
struct cfspi_ifc ifc;
struct cfspi_xfer xfer;
struct cfspi_dev *dev;
unsigned long state;
struct work_struct work;
struct workqueue_struct *wq;
struct list_head list;
int flow_off_sent;
u32 qd_low_mark;
u32 qd_high_mark;
struct completion comp;
wait_queue_head_t wait;
spinlock_t lock;
bool flow_stop;
bool slave;
bool slave_talked;
#ifdef CONFIG_DEBUG_FS
enum cfspi_state dbg_state;
u16 pcmd;
u16 tx_ppck_len;
u16 rx_ppck_len;
struct dentry *dbgfs_dir;
struct dentry *dbgfs_state;
struct dentry *dbgfs_frame;
#endif /* CONFIG_DEBUG_FS */
};
extern int spi_frm_align;
extern int spi_up_head_align;
extern int spi_up_tail_align;
extern int spi_down_head_align;
extern int spi_down_tail_align;
extern struct platform_driver cfspi_spi_driver;
void cfspi_dbg_state(struct cfspi *cfspi, int state);
int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len);
int cfspi_xmitlen(struct cfspi *cfspi);
int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len);
int cfspi_spi_remove(struct platform_device *pdev);
int cfspi_spi_probe(struct platform_device *pdev);
int cfspi_xmitfrm(struct cfspi *cfspi, u8 *buf, size_t len);
int cfspi_xmitlen(struct cfspi *cfspi);
int cfspi_rxfrm(struct cfspi *cfspi, u8 *buf, size_t len);
void cfspi_xfer(struct work_struct *work);
#endif /* CAIF_SPI_H_ */