spi/tegra114: add spi driver

Add SPI driver for NVIDIA's Tegra114 SPI controller. This controller
is different than the older SoCs SPI controller in internal design as
well as register interface.

This driver supports the:
- non DMA based transfer for smaller transfer i.e. less than FIFO depth.
- APB DMA based transfer for larger transfer i.e. more than FIFO depth.
- Clock gating through runtime PM callbacks.
- registration through DT only.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt

@@ -0,0 +1,26 @@
+NVIDIA Tegra114 SPI controller.
+
+Required properties:
+- compatible : should be "nvidia,tegra114-spi".
+- reg: Should contain SPI registers location and length.
+- interrupts: Should contain SPI interrupts.
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for this SPI controller.
+- This is also require clock named "spi" as per binding document
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+Example:
+
+spi@7000d600 {
+	compatible = "nvidia,tegra114-spi";
+	reg = <0x7000d600 0x200>;
+	interrupts = <0 82 0x04>;
+	nvidia,dma-request-selector = <&apbdma 16>;
+	spi-max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+};

drivers/spi/Kconfig

@@ -415,6 +415,14 @@ config SPI_MXS
 	help
 	  SPI driver for Freescale MXS devices.
 
+config SPI_TEGRA114
+	tristate "NVIDIA Tegra114 SPI Controller"
+	depends on ARCH_TEGRA && TEGRA20_APB_DMA
+	help
+	  SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
+	  is different than the older SoCs SPI controller and also register interface
+	  get changed with this controller.
+
 config SPI_TEGRA20_SFLASH
 	tristate "Nvidia Tegra20 Serial flash Controller"
 	depends on ARCH_TEGRA

drivers/spi/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_SPI_SH_HSPI)		+= spi-sh-hspi.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi-sh-msiof.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi-sh-sci.o
 obj-$(CONFIG_SPI_SIRF)		+= spi-sirf.o
+obj-$(CONFIG_SPI_TEGRA114)		+= spi-tegra114.o
 obj-$(CONFIG_SPI_TEGRA20_SFLASH)	+= spi-tegra20-sflash.o
 obj-$(CONFIG_SPI_TEGRA20_SLINK)		+= spi-tegra20-slink.o
 obj-$(CONFIG_SPI_TI_SSP)		+= spi-ti-ssp.o