arm64: dts: qcom: sc8280xp-x13s: enable eDP display

Enable the eDP display on MDSS0 DP3, including backlight control.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111133128.31813-1-johan+linaro@kernel.org

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -21,7 +21,7 @@
 	model = "Lenovo ThinkPad X13s";
 	compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pmc8280c_lpg 3 1000000>;
 		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
@@ -46,6 +46,22 @@
 		};
 	};
 
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_reg_en>;
+
+		regulator-boot-on;
+	};
+
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";
 
@@ -233,7 +249,6 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-boot-on;
-			regulator-always-on;	/* FIXME: VDD_A_EDP_0_0P9 */
 		};
 	};
 
@@ -314,6 +329,55 @@
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+			power-supply = <&vreg_edp_3p3>;
+
+			ports {
+				port {
+					edp_panel_in: endpoint {
+						remote-endpoint = <&mdss0_dp3_out>;
+					};
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
 &pcie2a {
 	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
@@ -878,6 +942,13 @@
 &tlmm {
 	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
 
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
 	hall_int_n_default: hall-int-n-state {
 		pins = "gpio107";
 		function = "gpio";