iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mvebu drivers changes for v3.12

Browse Source 
- MBus devicetree bindings
  - devbus update for address decoding window, cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQEcBAABAgAGBQJSC9AMAAoJEAi3KVZQDZAeEskH+gLbu4awN//ItLxqdOjCffs1
 o3N7C21SjAuGrueSxLFcYxLXk6XhM1x3mAEjvvbd1ze1yyKIY21PQGkwtjrxQxr5
 DbRtz8slgFte9jnOtUQ9gfSM8Q4PsOT4oPtj6tFc9DREIhX8uZtDxLn5YVNsD1MI
 hLxKbL9OHUxtwQ6aM7IdyMmYXkmLVaBUZFJ7f86CH8oVRJXLcqYzVdLrOUmbRdBX
 GpB6hAnSqx2spfAYxI928Od+3PIRVW4qm724t0iLI+8xQmjCxIbIDz8sS2NKVM9G
 YowJ+im5dUI3Wv7l/huVi/r0mvQJJi6BL36c+O0YJUY7KeKT615zdeG3AekvB5g=
 =6spO
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.12' of git://git.infradead.org/linux-mvebu into next/soc

From Jason Cooper:
mvebu drivers changes for v3.12

 - MBus devicetree bindings
 - devbus update for address decoding window, cleanup

* tag 'drivers-3.12' of git://git.infradead.org/linux-mvebu: (35 commits)
  memory: mvebu-devbus: Remove unused variable
  ARM: mvebu: Relocate PCIe node in Armada 370 RD board
  ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding
  ARM: mvebu: add support for the AXP WiFi AP board
  ARM: mvebu: use dts pre-processor for mv78230
  PCI: mvebu: Adapt to the new device tree layout
  bus: mvebu-mbus: Add devicetree binding
  ARM: kirkwood: Relocate PCIe device tree nodes
  ARM: kirkwood: Introduce MBUS_ID
  ARM: kirkwood: Introduce MBus DT node
  ARM: kirkwood: Use the preprocessor on device tree files
  ARM: kirkwood: Split DT and legacy MBus initialization
  ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes
  ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes
  ARM: mvebu: Add BootROM to Armada 370/XP device tree
  ARM: mvebu: Add MBus to Armada 370/XP device tree
  ARM: mvebu: Use the preprocessor on Armada 370/XP device tree files
  ARM: mvebu: Initialize MBus using the DT binding
  ARM: mvebu: Remove the harcoded BootROM window allocation
  bus: mvebu-mbus: Factorize Armada 370/XP data structures
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2013-08-15 23:10:31 -07:00
commit f668adebf4
87 changed files with 2216 additions and 1408 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

276
Documentation/devicetree/bindings/bus/mvebu-mbus.txt Normal file
View File

@ -0,0 +1,276 @@
* Marvell MBus
Required properties:
- compatible: Should be set to one of the following:
marvell,armada370-mbus
marvell,armadaxp-mbus
marvell,armada370-mbus
marvell,armadaxp-mbus
marvell,kirkwood-mbus
marvell,dove-mbus
marvell,orion5x-88f5281-mbus
marvell,orion5x-88f5182-mbus
marvell,orion5x-88f5181-mbus
marvell,orion5x-88f6183-mbus
marvell,mv78xx0-mbus
- address-cells: Must be '2'. The first cell for the MBus ID encoding,
the second cell for the address offset within the window.
- size-cells: Must be '1'.
- ranges: Must be set up to provide a proper translation for each child.
See the examples below.
- controller: Contains a single phandle referring to the MBus controller
node. This allows to specify the node that contains the
registers that control the MBus, which is typically contained
within the internal register window (see below).
Optional properties:
- pcie-mem-aperture: This optional property contains the aperture for
the memory region of the PCIe driver.
If it's defined, it must encode the base address and
size for the address decoding windows allocated for
the PCIe memory region.
- pcie-io-aperture: Just as explained for the above property, this
optional property contains the aperture for the
I/O region of the PCIe driver.
* Marvell MBus controller
Required properties:
- compatible: Should be set to "marvell,mbus-controller".
- reg: Device's register space.
Two entries are expected (see the examples below):
the first one controls the devices decoding window and
the second one controls the SDRAM decoding window.
Example:
soc {
compatible = "marvell,armada370-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x8000000>;
pcie-io-aperture = <0xe8000000 0x100000>;
internal-regs {
compatible = "simple-bus";
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
};
/* more children ...*/
};
};
** MBus address decoding window specification
The MBus children address space is comprised of two cells: the first one for
the window ID and the second one for the offset within the window.
In order to allow to describe valid and non-valid window entries, the
following encoding is used:
0xSIAA0000 0x00oooooo
Where:
S = 0x0 for a MBus valid window
S = 0xf for a non-valid window (see below)
If S = 0x0, then:
I = 4-bit window target ID
AA = windpw attribute
If S = 0xf, then:
I = don't care
AA = 1 for internal register
Following the above encoding, for each ranges entry for a MBus valid window
(S = 0x0), an address decoding window is allocated. On the other side,
entries for translation that do not correspond to valid windows (S = 0xf)
are skipped.
soc {
compatible = "marvell,armada370-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
ranges = <0xf0010000 0 0 0xd0000000 0x100000
0x01e00000 0 0 0xfff00000 0x100000>;
bootrom {
compatible = "marvell,bootrom";
reg = <0x01e00000 0 0x100000>;
};
/* other children */
...
internal-regs {
compatible = "simple-bus";
ranges = <0 0xf0010000 0 0x100000>;
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
};
/* more children ...*/
};
};
In the shown example, the translation entry in the 'ranges' property is what
makes the MBus driver create a static decoding window for the corresponding
given child device. Note that the binding does not require child nodes to be
present. Of course, child nodes are needed to probe the devices.
Since each window is identified by its target ID and attribute ID there's
a special macro that can be use to simplify the translation entries:
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
Using this macro, the above example would be:
soc {
compatible = "marvell,armada370-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
bootrom {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
/* other children */
...
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
};
/* other children */
...
};
};
** About the window base address
Remember the MBus controller allows a great deal of flexibility for choosing
the decoding window base address. When planning the device tree layout it's
possible to choose any address as the base address, provided of course there's
a region large enough available, and with the required alignment.
Yet in other words: there's nothing preventing us from setting a base address
of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
unused.
** Window allocation policy
The mbus-node ranges property defines a set of mbus windows that are expected
to be set by the operating system and that are guaranteed to be free of overlaps
with one another or with the system memory ranges.
Each entry in the property refers to exactly one window. If the operating system
choses to use a different set of mbus windows, it must ensure that any address
translations performed from downstream devices are adapted accordingly.
The operating system may insert additional mbus windows that do not conflict
with the ones listed in the ranges, e.g. for mapping PCIe devices.
As a special case, the internal register window must be set up by the boot
loader at the address listed in the ranges property, since access to that region
is needed to set up the other windows.
** Example
See the example below, where a more complete device tree is shown:
soc {
compatible = "marvell,armadaxp-mbus", "simple-bus";
controller = <&mbusc>;
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
bootrom {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
devbus-bootcs {
status = "okay";
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
/* NOR */
nor {
compatible = "cfi-flash";
reg = <0 0x8000000>;
bank-width = <2>;
};
};
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "okay";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
mbusc: mbus-controller@20000 {
reg = <0x20000 0x100>, <0x20180 0x20>;
};
interrupt-controller@20000 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
};
};

145
Documentation/devicetree/bindings/pci/mvebu-pci.txt
View File

@ -1,6 +1,7 @@
* Marvell EBU PCIe interfaces
Mandatory properties:
- compatible: one of the following values:
marvell,armada-370-pcie
marvell,armada-xp-pcie
@ -10,11 +11,49 @@ Mandatory properties:
- #interrupt-cells, set to <1>
- bus-range: PCI bus numbers covered
- device_type, set to "pci"
- ranges: ranges for the PCI memory and I/O regions, as well as the
MMIO registers to control the PCIe interfaces.
- ranges: ranges describing the MMIO registers to control the PCIe
interfaces, and ranges describing the MBus windows needed to access
the memory and I/O regions of each PCIe interface.
In addition, the Device Tree node must have sub-nodes describing each
The ranges describing the MMIO registers have the following layout:
0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
where:
* r is a 32-bits value that gives the offset of the MMIO
registers of this PCIe interface, from the base of the internal
registers.
* s is a 32-bits value that give the size of this MMIO
registers area. This range entry translates the '0x82000000 0 r' PCI
address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
of the internal register window (as identified by MBUS_ID(0xf0,
0x01)).
The ranges describing the MBus windows have the following layout:
0x8t000000 s 0 MBUS_ID(w, a) 0 1 0
where:
* t is the type of the MBus window (as defined by the standard PCI DT
bindings), 1 for I/O and 2 for memory.
* s is the PCI slot that corresponds to this PCIe interface
* w is the 'target ID' value for the MBus window
* a the 'attribute' value for the MBus window.
Since the location and size of the different MBus windows is not fixed in
hardware, and only determined in runtime, those ranges cover the full first
4 GB of the physical address space, and do not translate into a valid CPU
address.
In addition, the device tree node must have sub-nodes describing each
PCIe interface, having the following mandatory properties:
- reg: used only for interrupt mapping, so only the first four bytes
are used to refer to the correct bus number and device number.
- assigned-addresses: reference to the MMIO registers used to control
@ -26,7 +65,8 @@ PCIe interface, having the following mandatory properties:
- #address-cells, set to <3>
- #size-cells, set to <2>
- #interrupt-cells, set to <1>
- ranges, empty property.
- ranges, translating the MBus windows ranges of the parent node into
standard PCI addresses.
- interrupt-map-mask and interrupt-map, standard PCI properties to
define the mapping of the PCIe interface to interrupt numbers.
@ -47,27 +87,50 @@ pcie-controller {
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
@ -78,12 +141,13 @@ pcie-controller {
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
@ -94,12 +158,13 @@ pcie-controller {
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
@ -110,12 +175,13 @@ pcie-controller {
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
@ -126,12 +192,13 @@ pcie-controller {
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
@ -142,12 +209,13 @@ pcie-controller {
pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
@ -158,12 +226,13 @@ pcie-controller {
pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
@ -174,12 +243,13 @@ pcie-controller {
pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
@ -187,14 +257,16 @@ pcie-controller {
clocks = <&gateclk 12>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
@ -205,12 +277,13 @@ pcie-controller {
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;

1
arch/arm/boot/dts/Makefile
View File

@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-rd.dtb \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
armada-xp-openblocks-ax3-4.dtb

5
arch/arm/boot/dts/armada-370-db.dts
View File

@ -14,7 +14,7 @@
*/
/dts-v1/;
/include/ "armada-370.dtsi"
#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Evaluation Board";
@ -30,6 +30,9 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
internal-regs {
serial@12000 {
clock-frequency = <200000000>;

37
arch/arm/boot/dts/armada-370-mirabox.dts
View File

@ -9,7 +9,7 @@
*/
/dts-v1/;
/include/ "armada-370.dtsi"
#include "armada-370.dtsi"
/ {
model = "Globalscale Mirabox";
@ -25,6 +25,25 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected on the PCB to a USB 3.0 XHCI controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@ -120,22 +139,6 @@
reg = <0x25>;
};
};
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected on the PCB to a USB 3.0 XHCI controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
};

37
arch/arm/boot/dts/armada-370-rd.dts
View File

@ -12,7 +12,7 @@
*/
/dts-v1/;
/include/ "armada-370.dtsi"
#include "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Reference Design";
@ -28,6 +28,25 @@
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Internal mini-PCIe connector */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
clock-frequency = <200000000>;
@ -85,22 +104,6 @@
gpios = <&gpio0 6 1>;
};
};
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Internal mini-PCIe connector */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
};
};
};

111
arch/arm/boot/dts/armada-370-xp.dtsi
View File

@ -18,6 +18,8 @@
/include/ "skeleton64.dtsi"
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
model = "Marvell Armada 370 and XP SoC";
compatible = "marvell,armada-370-xp";
@ -38,18 +40,73 @@
};
soc {
#address-cells = <1>;
#address-cells = <2>;
#size-cells = <1>;
compatible = "simple-bus";
controller = <&mbusc>;
interrupt-parent = <&mpic>;
ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
pcie-mem-aperture = <0xe0000000 0x8000000>;
pcie-io-aperture = <0xe8000000 0x100000>;
devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
};
mpic: interrupt-controller@20000 {
compatible = "marvell,mpic";
@ -195,50 +252,6 @@
status = "disabled";
};
devbus-bootcs@10400 {
compatible = "marvell,mvebu-devbus";
reg = <0x10400 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs0@10408 {
compatible = "marvell,mvebu-devbus";
reg = <0x10408 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs1@10410 {
compatible = "marvell,mvebu-devbus";
reg = <0x10410 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs2@10418 {
compatible = "marvell,mvebu-devbus";
reg = <0x10418 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
devbus-cs3@10420 {
compatible = "marvell,mvebu-devbus";
reg = <0x10420 0x8>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&coreclk 0>;
status = "disabled";
};
};
};
};

112
arch/arm/boot/dts/armada-370.dtsi
View File

@ -15,7 +15,7 @@
* common to all Armada SoCs.
*/
/include/ "armada-370-xp.dtsi"
#include "armada-370-xp.dtsi"
/include/ "skeleton.dtsi"
/ {
@ -29,8 +29,66 @@
};
soc {
ranges = <0 0xd0000000 0x0100000 /* internal registers */
0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
compatible = "marvell,armada370-mbus", "simple-bus";
bootrom {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
};
pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
};
};
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
@ -169,54 +227,6 @@
0x18304 0x4>;
status = "okay";
};
pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
};
};
};
};
};

164
arch/arm/boot/dts/armada-xp-axpwifiap.dts Normal file
View File

@ -0,0 +1,164 @@
/*
* Device Tree file for Marvell RD-AXPWiFiAP.
*
* Note: this board is shipped with a new generation boot loader that
* remaps internal registers at 0xf1000000. Therefore, if earlyprintk
* is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
* used.
*
* Copyright (C) 2013 Marvell
*
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
#include "armada-xp-mv78230.dtsi"
/ {
model = "Marvell RD-AXPWiFiAP";
compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/* First mini-PCIe port */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Second mini-PCIe port */
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
};
/* Renesas uPD720202 USB 3.0 controller */
pcie@3,0 {
/* Port 0, Lane 3 */
status = "okay";
};
};
internal-regs {
pinctrl {
pinctrl-0 = <&pmx_phy_int>;
pinctrl-names = "default";
pmx_ge0: pmx-ge0 {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1: pmx-ge1 {
marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
pmx_keys: pmx-keys {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
pmx_spi: pmx-spi {
marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
marvell,function = "spi";
};
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
};
serial@12000 {
clock-frequency = <250000000>;
status = "okay";
};
serial@12100 {
clock-frequency = <250000000>;
status = "okay";
};
sata@a0000 {
nr-ports = <1>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@70000 {
pinctrl-0 = <&pmx_ge0>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&pmx_ge1>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
spi0: spi@10600 {
status = "okay";
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
button@1 {
label = "Factory Reset Button";
linux,code = <141>; /* KEY_SETUP */
gpios = <&gpio1 1 1>;
};
};
};

131
arch/arm/boot/dts/armada-xp-db.dts
View File

@ -14,7 +14,7 @@
*/
/dts-v1/;
/include/ "armada-xp-mv78460.dtsi"
#include "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Evaluation Board";
@ -30,9 +30,70 @@
};
soc {
ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
0xf0000000 0 0xf0000000 0x1000000>; /* Device Bus, NOR 16MiB */
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
devbus-bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 16 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x1000000>;
bank-width = <2>;
};
};
pcie-controller {
status = "okay";
/*
* All 6 slots are physically present as
* standard PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
};
pcie@3,0 {
/* Port 0, Lane 2 */
status = "okay";
};
pcie@4,0 {
/* Port 0, Lane 3 */
status = "okay";
};
pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
@ -127,68 +188,6 @@
spi-max-frequency = <20000000>;
};
};
pcie-controller {
status = "okay";
/*
* All 6 slots are physically present as
* standard PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@2,0 {
/* Port 0, Lane 1 */
status = "okay";
};
pcie@3,0 {
/* Port 0, Lane 2 */
status = "okay";
};
pcie@4,0 {
/* Port 0, Lane 3 */
status = "okay";
};
pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
devbus-bootcs@10400 {
status = "okay";
ranges = <0 0xf0000000 0x1000000>;
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 16 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x1000000>;
bank-width = <2>;
};
};
};
};
};

107
arch/arm/boot/dts/armada-xp-gp.dts
View File

@ -14,7 +14,7 @@
*/
/dts-v1/;
/include/ "armada-xp-mv78460.dtsi"
#include "armada-xp-mv78460.dtsi"
/ {
model = "Marvell Armada XP Development Board DB-MV784MP-GP";
@ -39,9 +39,58 @@
};
soc {
ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>;
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
devbus-bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 16 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x1000000>;
bank-width = <2>;
};
};
pcie-controller {
status = "okay";
/*
* The 3 slots are physically present as
* standard PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
@ -126,56 +175,6 @@
spi-max-frequency = <108000000>;
};
};
devbus-bootcs@10400 {
status = "okay";
ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 16 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x1000000>;
bank-width = <2>;
};
};
pcie-controller {
status = "okay";
/*
* The 3 slots are physically present as
* standard PCIe slots on the board.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
pcie@9,0 {
/* Port 2, Lane 0 */
status = "okay";
};
pcie@10,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
};
};
};

224
arch/arm/boot/dts/armada-xp-mv78230.dtsi
View File

@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
/include/ "armada-xp.dtsi"
#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78230 SoC";
@ -44,6 +44,124 @@
};
soc {
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
};
internal-regs {
pinctrl {
compatible = "marvell,mv78230-pinctrl";
@ -77,110 +195,6 @@
#interrupts-cells = <2>;
interrupts = <87>, <88>, <89>;
};
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
};
};
};
};

263
arch/arm/boot/dts/armada-xp-mv78260.dtsi
View File

@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
/include/ "armada-xp.dtsi"
#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78260 SoC";
@ -45,6 +45,145 @@
};
soc {
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
status = "disabled";
};
};
internal-regs {
pinctrl {
compatible = "marvell,mv78260-pinctrl";
@ -97,128 +236,6 @@
clocks = <&gateclk 1>;
status = "disabled";
};
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
status = "disabled";
};
};
};
};
};

411
arch/arm/boot/dts/armada-xp-mv78460.dtsi
View File

@ -13,7 +13,7 @@
* common to all Armada XP SoCs.
*/
/include/ "armada-xp.dtsi"
#include "armada-xp.dtsi"
/ {
model = "Marvell Armada XP MV78460 SoC";
@ -61,6 +61,227 @@
};
soc {
/*
* MV78460 has 4 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
};
pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
};
pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
0x81000000 0 0 0x81000000 0x7 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
};
pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
0x81000000 0 0 0x81000000 0x8 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
0x81000000 0 0 0x81000000 0x9 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
0x81000000 0 0 0x81000000 0xa 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
status = "disabled";
};
};
internal-regs {
pinctrl {
compatible = "marvell,mv78460-pinctrl";
@ -113,194 +334,6 @@
clocks = <&gateclk 1>;
status = "disabled";
};
/*
* MV78460 has 4 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. Two units are
* x4/x1.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 58>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
status = "disabled";
};
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 60>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 7>;
status = "disabled";
};
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 61>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 8>;
status = "disabled";
};
pcie@5,0 {
device_type = "pci";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 62>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 9>;
status = "disabled";
};
pcie@6,0 {
device_type = "pci";
assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 63>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 10>;
status = "disabled";
};
pcie@7,0 {
device_type = "pci";
assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
reg = <0x3800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 64>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <2>;
clocks = <&gateclk 11>;
status = "disabled";
};
pcie@8,0 {
device_type = "pci";
assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
reg = <0x4000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 65>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <3>;
clocks = <&gateclk 12>;
status = "disabled";
};
pcie@9,0 {
device_type = "pci";
assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
reg = <0x4800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 99>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 26>;
status = "disabled";
};
pcie@10,0 {
device_type = "pci";
assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
reg = <0x5000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 103>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 27>;
status = "disabled";
};
};
};
};
};

88
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
View File

@ -11,7 +11,7 @@
*/
/dts-v1/;
/include/ "armada-xp-mv78260.dtsi"
#include "armada-xp-mv78260.dtsi"
/ {
model = "PlatHome OpenBlocks AX3-4 board";
@ -27,9 +27,46 @@
};
soc {
ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>;
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
devbus-bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 128 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x8000000>;
bank-width = <2>;
};
};
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
internal-regs {
serial@12000 {
@ -148,49 +185,6 @@
usb@51000 {
status = "okay";
};
/* USB interface in the mini-PCIe connector */
usb@52000 {
status = "okay";
};
devbus-bootcs@10400 {
status = "okay";
ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
/* NOR 128 MiB */
nor@0 {
compatible = "cfi-flash";
reg = <0 0x8000000>;
bank-width = <2>;
};
};
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
};
};
};
};

9
arch/arm/boot/dts/armada-xp.dtsi
View File

@ -16,7 +16,7 @@
* common to all Armada SoCs.
*/
/include/ "armada-370-xp.dtsi"
#include "armada-370-xp.dtsi"
/ {
model = "Marvell Armada XP family SoC";
@ -27,6 +27,13 @@
};
soc {
compatible = "marvell,armadaxp-mbus", "simple-bus";
bootrom {
compatible = "marvell,bootrom";
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
};
internal-regs {
L2: l2-cache {
compatible = "marvell,aurora-system-cache";

66
arch/arm/boot/dts/kirkwood-6281.dtsi
View File

@ -1,4 +1,39 @@
/ {
mbus {
pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
compatible = "marvell,88f6281-pinctrl";
@ -41,37 +76,6 @@
};
};
pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;

102
arch/arm/boot/dts/kirkwood-6282.dtsi
View File

@ -1,4 +1,59 @@
/ {
mbus {
pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 10>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 18>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@ -94,52 +149,5 @@
status = "disabled";
};
pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */
0x82000000 0 0x00044000 0x00044000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 10>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 18>;
status = "disabled";
};
};
};
};

4
arch/arm/boot/dts/kirkwood-cloudbox.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "LaCie CloudBox";

7
arch/arm/boot/dts/kirkwood-db-88f6281.dts
View File

@ -11,14 +11,15 @@
/dts-v1/;
/include/ "kirkwood-db.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood-db.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Marvell DB-88F6281-BP Development Board";
compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
ocp@f1000000 {
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

7
arch/arm/boot/dts/kirkwood-db-88f6282.dts
View File

@ -11,14 +11,15 @@
/dts-v1/;
/include/ "kirkwood-db.dtsi"
/include/ "kirkwood-6282.dtsi"
#include "kirkwood-db.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Marvell DB-88F6282-BP Development Board";
compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
ocp@f1000000 {
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";

10
arch/arm/boot/dts/kirkwood-db.dtsi
View File

@ -12,7 +12,7 @@
* and 6282 variants of the Marvell Kirkwood Development Board.
*/
/include/ "kirkwood.dtsi"
#include "kirkwood.dtsi"
/ {
memory {
@ -77,13 +77,5 @@
cd-gpios = <&gpio1 6 0>;
status = "okay";
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
};

2
arch/arm/boot/dts/kirkwood-dns320.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-dnskw.dtsi"
#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-320 NAS (Rev A1)";

2
arch/arm/boot/dts/kirkwood-dns325.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-dnskw.dtsi"
#include "kirkwood-dnskw.dtsi"
/ {
model = "D-Link DNS-325 NAS (Rev A1)";

4
arch/arm/boot/dts/kirkwood-dnskw.dtsi
View File

@ -1,5 +1,5 @@
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS NASes (kirkwood-based)";

4
arch/arm/boot/dts/kirkwood-dockstar.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Seagate FreeAgent Dockstar";

4
arch/arm/boot/dts/kirkwood-dreamplug.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Dreamplug";

4
arch/arm/boot/dts/kirkwood-goflexnet.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Seagate GoFlex Net";

4
arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Guruplug Server Plus";

4
arch/arm/boot/dts/kirkwood-ib62x0.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";

23
arch/arm/boot/dts/kirkwood-iconnect.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Iomega Iconnect";
@ -18,6 +18,17 @@
linux,initrd-end = <0x4800000>;
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_button_reset: pmx-button-reset {
@ -101,14 +112,6 @@
reg = <0x980000 0x1f400000>;
};
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {

4
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Iomega StorCenter ix2-200";

2
arch/arm/boot/dts/kirkwood-is2.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Internet Space v2";

4
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-98dx4122.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-98dx4122.dtsi"
/ {
model = "Keymile Kirkwood Reference Design";

2
arch/arm/boot/dts/kirkwood-lschlv2.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-lsxl.dtsi"
#include "kirkwood-lsxl.dtsi"
/ {
model = "Buffalo Linkstation LS-CHLv2";

2
arch/arm/boot/dts/kirkwood-lsxhl.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-lsxl.dtsi"
#include "kirkwood-lsxl.dtsi"
/ {
model = "Buffalo Linkstation LS-XHL";

4
arch/arm/boot/dts/kirkwood-lsxl.dtsi
View File

@ -1,5 +1,5 @@
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
chosen {

23
arch/arm/boot/dts/kirkwood-mplcec4.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
@ -16,6 +16,17 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_led_health: pmx-led-health {
@ -134,14 +145,6 @@
cd-gpios = <&gpio1 15 1>;
/* No WP GPIO */
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {

23
arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6282.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "NETGEAR ReadyNAS Duo v2";
@ -16,6 +16,17 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_button_power: pmx-button-power {
@ -101,14 +112,6 @@
status = "okay";
nr-ports = <2>;
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {

4
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
View File

@ -1,5 +1,5 @@
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
chosen {

2
arch/arm/boot/dts/kirkwood-ns2.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space v2";

2
arch/arm/boot/dts/kirkwood-ns2lite.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space Lite v2";

2
arch/arm/boot/dts/kirkwood-ns2max.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
#include "kirkwood-ns2-common.dtsi"
/ {
model = "LaCie Network Space Max v2";

2
arch/arm/boot/dts/kirkwood-ns2mini.dts
View File

@ -1,6 +1,6 @@
/dts-v1/;
/include/ "kirkwood-ns2-common.dtsi"
#include "kirkwood-ns2-common.dtsi"
/ {
/* This machine is embedded in the first LaCie CloudBox product. */

23
arch/arm/boot/dts/kirkwood-nsa310.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "ZyXEL NSA310";
@ -16,6 +16,17 @@
bootargs = "console=ttyS0,115200";
};
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = <&pmx_unknown>;
@ -162,14 +173,6 @@
reg = <0x5040000 0x2fc0000>;
};
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio_keys {

4
arch/arm/boot/dts/kirkwood-openblocks_a6.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6282.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Plat'Home OpenBlocksA6";

4
arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
View File

@ -6,8 +6,8 @@
* Licensed under GPLv2
*/
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
memory {

2
arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
View File

@ -8,7 +8,7 @@
/dts-v1/;
/include/ "kirkwood-sheevaplug-common.dtsi"
#include "kirkwood-sheevaplug-common.dtsi"
/ {
model = "Globalscale Technologies eSATA SheevaPlug";

2
arch/arm/boot/dts/kirkwood-sheevaplug.dts
View File

@ -8,7 +8,7 @@
/dts-v1/;
/include/ "kirkwood-sheevaplug-common.dtsi"
#include "kirkwood-sheevaplug-common.dtsi"
/ {
model = "Globalscale Technologies SheevaPlug";

4
arch/arm/boot/dts/kirkwood-topkick.dts
View File

@ -1,7 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6282.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
/ {
model = "Univeral Scientific Industrial Co. Topkick-1281P2";

6
arch/arm/boot/dts/kirkwood-ts219-6281.dts
View File

@ -1,8 +1,8 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/include/ "kirkwood-ts219.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
#include "kirkwood-ts219.dtsi"
/ {
ocp@f1000000 {

25
arch/arm/boot/dts/kirkwood-ts219-6282.dts
View File

@ -1,10 +1,21 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6282.dtsi"
/include/ "kirkwood-ts219.dtsi"
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
#include "kirkwood-ts219.dtsi"
/ {
mbus {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
pcie-controller {
status = "okay";
pcie@2,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@ -30,14 +41,6 @@
marvell,function = "gpio";
};
};
pcie-controller {
status = "okay";
pcie@2,0 {
status = "okay";
};
};
};
gpio_keys {

17
arch/arm/boot/dts/kirkwood-ts219.dtsi
View File

@ -11,6 +11,16 @@
bootargs = "console=ttyS0,115200n8";
};
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
i2c@11000 {
status = "okay";
@ -87,12 +97,5 @@
status = "okay";
nr-ports = <2>;
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
};

17
arch/arm/boot/dts/kirkwood.dtsi
View File

@ -1,5 +1,7 @@
/include/ "skeleton.dtsi"
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
@ -28,15 +30,28 @@
<0xf1020214 0x04>;
};
mbus {
compatible = "marvell,kirkwood-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
};
ocp@f1000000 {
compatible = "simple-bus";
ranges = <0x00000000 0xf1000000 0x0100000
0xe0000000 0xe0000000 0x8100000 /* PCIE */
0xf4000000 0xf4000000 0x0000400
0xf5000000 0xf5000000 0x0000400>;
#address-cells = <1>;
#size-cells = <1>;
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x80>, <0x1500 0x20>;
};
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;

68
arch/arm/mach-dove/common.c
View File

@ -27,6 +27,22 @@
#include <plat/time.h>
#include "common.h"
/* These can go away once Dove uses the mvebu-mbus DT binding */
#define DOVE_MBUS_PCIE0_MEM_TARGET 0x4
#define DOVE_MBUS_PCIE0_MEM_ATTR 0xe8
#define DOVE_MBUS_PCIE0_IO_TARGET 0x4
#define DOVE_MBUS_PCIE0_IO_ATTR 0xe0
#define DOVE_MBUS_PCIE1_MEM_TARGET 0x8
#define DOVE_MBUS_PCIE1_MEM_ATTR 0xe8
#define DOVE_MBUS_PCIE1_IO_TARGET 0x8
#define DOVE_MBUS_PCIE1_IO_ATTR 0xe0
#define DOVE_MBUS_CESA_TARGET 0x3
#define DOVE_MBUS_CESA_ATTR 0x1
#define DOVE_MBUS_BOOTROM_TARGET 0x1
#define DOVE_MBUS_BOOTROM_ATTR 0xfd
#define DOVE_MBUS_SCRATCHPAD_TARGET 0xd
#define DOVE_MBUS_SCRATCHPAD_ATTR 0x0
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void)
{
/*
* The PCIe windows will no longer be statically allocated
* here once Dove is migrated to the pci-mvebu driver.
* here once Dove is migrated to the pci-mvebu driver. The
* non-PCIe windows will no longer be created here once Dove
* fully moves to DT.
*/
mvebu_mbus_add_window_remap_flags("pcie0.0",
mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET,
DOVE_MBUS_PCIE0_IO_ATTR,
DOVE_PCIE0_IO_PHYS_BASE,
DOVE_PCIE0_IO_SIZE,
DOVE_PCIE0_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pcie1.0",
DOVE_PCIE0_IO_BUS_BASE);
mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET,
DOVE_MBUS_PCIE1_IO_ATTR,
DOVE_PCIE1_IO_PHYS_BASE,
DOVE_PCIE1_IO_SIZE,
DOVE_PCIE1_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pcie0.0",
DOVE_PCIE0_MEM_PHYS_BASE,
DOVE_PCIE0_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window_remap_flags("pcie1.0",
DOVE_PCIE1_MEM_PHYS_BASE,
DOVE_PCIE1_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
DOVE_CESA_SIZE);
mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
DOVE_BOOTROM_SIZE);
mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
DOVE_SCRATCHPAD_SIZE);
DOVE_PCIE1_IO_BUS_BASE);
mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET,
DOVE_MBUS_PCIE0_MEM_ATTR,
DOVE_PCIE0_MEM_PHYS_BASE,
DOVE_PCIE0_MEM_SIZE);
mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET,
DOVE_MBUS_PCIE1_MEM_ATTR,
DOVE_PCIE1_MEM_PHYS_BASE,
DOVE_PCIE1_MEM_SIZE);
mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET,
DOVE_MBUS_CESA_ATTR,
DOVE_CESA_PHYS_BASE,
DOVE_CESA_SIZE);
mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET,
DOVE_MBUS_BOOTROM_ATTR,
DOVE_BOOTROM_PHYS_BASE,
DOVE_BOOTROM_SIZE);
mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET,
DOVE_MBUS_SCRATCHPAD_ATTR,
DOVE_SCRATCHPAD_PHYS_BASE,
DOVE_SCRATCHPAD_SIZE);
}
void __init dove_init(void)

1
arch/arm/mach-kirkwood/board-dt.c
View File

@ -87,6 +87,7 @@ static void __init kirkwood_dt_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
BUG_ON(mvebu_mbus_dt_init());
kirkwood_setup_wins();
kirkwood_l2_init();

26
arch/arm/mach-kirkwood/common.c
View File

@ -37,6 +37,12 @@
#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
#define KIRKWOOD_MBUS_NAND_TARGET 0x01
#define KIRKWOOD_MBUS_NAND_ATTR 0x2f
#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
#define KIRKWOOD_MBUS_SRAM_ATTR 0x01
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void)
void __init kirkwood_init_early(void)
{
orion_time_set_base(TIMER_VIRT_BASE);
mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
}
int kirkwood_tclk;
@ -672,10 +674,14 @@ char * __init kirkwood_id(void)
void __init kirkwood_setup_wins(void)
{
mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
KIRKWOOD_NAND_MEM_SIZE);
mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
KIRKWOOD_SRAM_SIZE);
mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
KIRKWOOD_MBUS_NAND_ATTR,
KIRKWOOD_NAND_MEM_PHYS_BASE,
KIRKWOOD_NAND_MEM_SIZE);
mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
KIRKWOOD_MBUS_SRAM_ATTR,
KIRKWOOD_SRAM_PHYS_BASE,
KIRKWOOD_SRAM_SIZE);
}
void __init kirkwood_l2_init(void)
@ -703,6 +709,10 @@ void __init kirkwood_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
kirkwood_setup_wins();
kirkwood_l2_init();

40
arch/arm/mach-kirkwood/pcie.c
View File

@ -20,6 +20,16 @@
#include <mach/bridge-regs.h>
#include "common.h"
/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET 0x4
#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR 0xe8
#define KIRKWOOD_MBUS_PCIE0_IO_TARGET 0x4
#define KIRKWOOD_MBUS_PCIE0_IO_ATTR 0xe0
#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET 0x4
#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR 0xd8
#define KIRKWOOD_MBUS_PCIE1_IO_TARGET 0x4
#define KIRKWOOD_MBUS_PCIE1_IO_ATTR 0xd0
static void kirkwood_enable_pcie_clk(const char *port)
{
struct clk *clk;
@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base)
void __init kirkwood_pcie_init(unsigned int portmask)
{
mvebu_mbus_add_window_remap_flags("pcie0.0",
mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
KIRKWOOD_MBUS_PCIE0_IO_ATTR,
KIRKWOOD_PCIE_IO_PHYS_BASE,
KIRKWOOD_PCIE_IO_SIZE,
KIRKWOOD_PCIE_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pcie0.0",
KIRKWOOD_PCIE_MEM_PHYS_BASE,
KIRKWOOD_PCIE_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window_remap_flags("pcie1.0",
KIRKWOOD_PCIE_IO_BUS_BASE);
mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
KIRKWOOD_PCIE_MEM_PHYS_BASE,
KIRKWOOD_PCIE_MEM_SIZE);
mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
KIRKWOOD_MBUS_PCIE1_IO_ATTR,
KIRKWOOD_PCIE1_IO_PHYS_BASE,
KIRKWOOD_PCIE1_IO_SIZE,
KIRKWOOD_PCIE1_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pcie1.0",
KIRKWOOD_PCIE1_MEM_PHYS_BASE,
KIRKWOOD_PCIE1_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
KIRKWOOD_PCIE1_IO_BUS_BASE);
mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
KIRKWOOD_PCIE1_MEM_PHYS_BASE,
KIRKWOOD_PCIE1_MEM_SIZE);
vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;

23
arch/arm/mach-mv78xx0/pcie.c
View File

@ -18,6 +18,11 @@
#include <mach/mv78xx0.h>
#include "common.h"
#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane) (0xf8 & ~(0x10 << (lane)))
#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane) ((port) ? 8 : 4)
#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane) (0xf0 & ~(0x10 << (lane)))
struct pcie_port {
u8 maj;
u8 min;
@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void)
start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d.%d MEM", pp->maj, pp->min);
@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void)
if (request_resource(&iomem_resource, &pp->res))
panic("can't allocate PCIe MEM sub-space");
snprintf(winname, sizeof(winname), "pcie%d.%d",
pp->maj, pp->min);
mvebu_mbus_add_window_remap_flags(winname,
pp->res.start,
resource_size(&pp->res),
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window_remap_flags(winname,
i * SZ_64K, SZ_64K,
0, MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
pp->res.start, resource_size(&pp->res));
mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
i * SZ_64K, SZ_64K, 0);
}
}

34
arch/arm/mach-mvebu/armada-370-xp.c
View File

@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void)
debug_ll_io_init();
}
/*
* This initialization will be replaced by a DT-based
* initialization once the mvebu-mbus driver gains DT support.
*/
#define ARMADA_370_XP_MBUS_WINS_OFFS 0x20000
#define ARMADA_370_XP_MBUS_WINS_SIZE 0x100
#define ARMADA_370_XP_SDRAM_WINS_OFFS 0x20180
#define ARMADA_370_XP_SDRAM_WINS_SIZE 0x20
static void __init armada_370_xp_mbus_init(void)
{
char *mbus_soc_name;
struct device_node *dn;
const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS);
const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS);
if (of_machine_is_compatible("marvell,armada370"))
mbus_soc_name = "marvell,armada370-mbus";
else
mbus_soc_name = "marvell,armadaxp-mbus";
dn = of_find_node_by_name(NULL, "internal-regs");
BUG_ON(!dn);
mvebu_mbus_init(mbus_soc_name,
of_translate_address(dn, &mbus_wins_offs),
ARMADA_370_XP_MBUS_WINS_SIZE,
of_translate_address(dn, &sdram_wins_offs),
ARMADA_370_XP_SDRAM_WINS_SIZE);
}
static void __init armada_370_xp_timer_and_clk_init(void)
{
of_clk_init(NULL);
armada_370_xp_timer_init();
coherency_init();
armada_370_xp_mbus_init();
BUG_ON(mvebu_mbus_dt_init());
#ifdef CONFIG_CACHE_L2X0
l2x0_of_init(0, ~0UL);
#endif

25
arch/arm/mach-mvebu/platsmp.c
View File

@ -21,6 +21,7 @@
#include <linux/smp.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/mbus.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
@ -29,6 +30,9 @@
#include "pmsu.h"
#include "coherency.h"
#define AXP_BOOTROM_BASE 0xfff00000
#define AXP_BOOTROM_SIZE 0x100000
void __init set_secondary_cpus_clock(void)
{
int thiscpu;
@ -114,10 +118,29 @@ static void __init armada_xp_smp_init_cpus(void)
void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *node;
struct resource res;
int err;
set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
/*
* In order to boot the secondary CPUs we need to ensure
* the bootROM is mapped at the correct address.
*/
node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
if (!node)
panic("Cannot find 'marvell,bootrom' compatible node");
err = of_address_to_resource(node, 0, &res);
if (err < 0)
panic("Cannot get 'bootrom' node address");
if (res.start != AXP_BOOTROM_BASE ||
resource_size(&res) != AXP_BOOTROM_SIZE)
panic("The address for the BootROM is incorrect");
}
struct smp_operations armada_xp_smp_ops __initdata = {

36
arch/arm/mach-orion5x/common.c
View File

@ -174,8 +174,10 @@ void __init orion5x_xor_init(void)
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
ORION5X_SRAM_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
ORION_MBUS_SRAM_ATTR,
ORION5X_SRAM_PHYS_BASE,
ORION5X_SRAM_SIZE);
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}
@ -222,22 +224,24 @@ void orion5x_setup_wins(void)
* The PCIe windows will no longer be statically allocated
* here once Orion5x is migrated to the pci-mvebu driver.
*/
mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
ORION_MBUS_PCIE_IO_ATTR,
ORION5X_PCIE_IO_PHYS_BASE,
ORION5X_PCIE_IO_SIZE,
ORION5X_PCIE_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
ORION5X_PCIE_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
ORION5X_PCIE_IO_BUS_BASE);
mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
ORION_MBUS_PCIE_MEM_ATTR,
ORION5X_PCIE_MEM_PHYS_BASE,
ORION5X_PCIE_MEM_SIZE);
mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
ORION_MBUS_PCI_IO_ATTR,
ORION5X_PCI_IO_PHYS_BASE,
ORION5X_PCI_IO_SIZE,
ORION5X_PCI_IO_BUS_BASE,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
ORION5X_PCI_MEM_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
ORION5X_PCI_IO_BUS_BASE);
mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
ORION_MBUS_PCI_MEM_ATTR,
ORION5X_PCI_MEM_PHYS_BASE,
ORION5X_PCI_MEM_SIZE);
}
int orion5x_tclk;

17
arch/arm/mach-orion5x/common.h
View File

@ -7,6 +7,23 @@ struct dsa_platform_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
#define ORION_MBUS_PCIE_MEM_TARGET 0x04
#define ORION_MBUS_PCIE_MEM_ATTR 0x59
#define ORION_MBUS_PCIE_IO_TARGET 0x04
#define ORION_MBUS_PCIE_IO_ATTR 0x51
#define ORION_MBUS_PCIE_WA_TARGET 0x04
#define ORION_MBUS_PCIE_WA_ATTR 0x79
#define ORION_MBUS_PCI_MEM_TARGET 0x03
#define ORION_MBUS_PCI_MEM_ATTR 0x59
#define ORION_MBUS_PCI_IO_TARGET 0x03
#define ORION_MBUS_PCI_IO_ATTR 0x51
#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
#define ORION_MBUS_DEVBUS_BOOT_ATTR 0x0f
#define ORION_MBUS_DEVBUS_TARGET(cs) 0x01
#define ORION_MBUS_DEVBUS_ATTR(cs) (~(1 << cs))
#define ORION_MBUS_SRAM_TARGET 0x00
#define ORION_MBUS_SRAM_ATTR 0x00
/*
* Basic Orion init functions used early by machine-setup.
*/

6
arch/arm/mach-orion5x/d2net-setup.c
View File

@ -317,8 +317,10 @@ static void __init d2net_init(void)
d2net_sata_power_init();
orion5x_sata_init(&d2net_sata_data);
mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
D2NET_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
D2NET_NOR_BOOT_BASE,
D2NET_NOR_BOOT_SIZE);
platform_device_register(&d2net_nor_flash);
platform_device_register(&d2net_gpio_buttons);

24
arch/arm/mach-orion5x/db88f5281-setup.c
View File

@ -340,19 +340,27 @@ static void __init db88f5281_init(void)
orion5x_uart0_init();
orion5x_uart1_init();
mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
DB88F5281_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
DB88F5281_NOR_BOOT_BASE,
DB88F5281_NOR_BOOT_SIZE);
platform_device_register(&db88f5281_boot_flash);
mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
DB88F5281_7SEG_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
ORION_MBUS_DEVBUS_ATTR(0),
DB88F5281_7SEG_BASE,
DB88F5281_7SEG_SIZE);
mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
DB88F5281_NOR_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
ORION_MBUS_DEVBUS_ATTR(1),
DB88F5281_NOR_BASE,
DB88F5281_NOR_SIZE);
platform_device_register(&db88f5281_nor_flash);
mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
DB88F5281_NAND_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
ORION_MBUS_DEVBUS_ATTR(2),
DB88F5281_NAND_BASE,
DB88F5281_NAND_SIZE);
platform_device_register(&db88f5281_nand_flash);
i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);

6
arch/arm/mach-orion5x/dns323-setup.c
View File

@ -611,8 +611,10 @@ static void __init dns323_init(void)
/* setup flash mapping
* CS3 holds a 8 MB Spansion S29GL064M90TFIR4
*/
mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
DNS323_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
DNS323_NOR_BOOT_BASE,
DNS323_NOR_BOOT_SIZE);
platform_device_register(&dns323_nor_flash);
/* Sort out LEDs, Buttons and i2c devices */

6
arch/arm/mach-orion5x/edmini_v2-setup.c
View File

@ -154,8 +154,10 @@ void __init edmini_v2_init(void)
orion5x_ehci0_init();
orion5x_eth_init(&edmini_v2_eth_data);
mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
EDMINI_V2_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
EDMINI_V2_NOR_BOOT_BASE,
EDMINI_V2_NOR_BOOT_SIZE);
platform_device_register(&edmini_v2_nor_flash);
pr_notice("edmini_v2: USB device port, flash write and power-off "

12
arch/arm/mach-orion5x/kurobox_pro-setup.c
View File

@ -359,13 +359,17 @@ static void __init kurobox_pro_init(void)
orion5x_uart1_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
KUROBOX_PRO_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
KUROBOX_PRO_NOR_BOOT_BASE,
KUROBOX_PRO_NOR_BOOT_SIZE);
platform_device_register(&kurobox_pro_nor_flash);
if (machine_is_kurobox_pro()) {
mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
KUROBOX_PRO_NAND_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
ORION_MBUS_DEVBUS_ATTR(0),
KUROBOX_PRO_NAND_BASE,
KUROBOX_PRO_NAND_SIZE);
platform_device_register(&kurobox_pro_nand_flash);
}

6
arch/arm/mach-orion5x/ls-chl-setup.c
View File

@ -294,8 +294,10 @@ static void __init lschl_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
LSCHL_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
LSCHL_NOR_BOOT_BASE,
LSCHL_NOR_BOOT_SIZE);
platform_device_register(&lschl_nor_flash);
platform_device_register(&lschl_leds);

6
arch/arm/mach-orion5x/ls_hgl-setup.c
View File

@ -243,8 +243,10 @@ static void __init ls_hgl_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
LS_HGL_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
LS_HGL_NOR_BOOT_BASE,
LS_HGL_NOR_BOOT_SIZE);
platform_device_register(&ls_hgl_nor_flash);
platform_device_register(&ls_hgl_button_device);

6
arch/arm/mach-orion5x/lsmini-setup.c
View File

@ -244,8 +244,10 @@ static void __init lsmini_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
LSMINI_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
LSMINI_NOR_BOOT_BASE,
LSMINI_NOR_BOOT_SIZE);
platform_device_register(&lsmini_nor_flash);
platform_device_register(&lsmini_button_device);

6
arch/arm/mach-orion5x/mss2-setup.c
View File

@ -241,8 +241,10 @@ static void __init mss2_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
MSS2_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
MSS2_NOR_BOOT_BASE,
MSS2_NOR_BOOT_SIZE);
platform_device_register(&mss2_nor_flash);
platform_device_register(&mss2_button_device);

6
arch/arm/mach-orion5x/mv2120-setup.c
View File

@ -204,8 +204,10 @@ static void __init mv2120_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
MV2120_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
MV2120_NOR_BOOT_BASE,
MV2120_NOR_BOOT_SIZE);
platform_device_register(&mv2120_nor_flash);
platform_device_register(&mv2120_button_device);

6
arch/arm/mach-orion5x/net2big-setup.c
View File

@ -397,8 +397,10 @@ static void __init net2big_init(void)
net2big_sata_power_init();
orion5x_sata_init(&net2big_sata_data);
mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
NET2BIG_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
NET2BIG_NOR_BOOT_BASE,
NET2BIG_NOR_BOOT_SIZE);
platform_device_register(&net2big_nor_flash);
platform_device_register(&net2big_gpio_buttons);

9
arch/arm/mach-orion5x/pci.c
View File

@ -157,11 +157,10 @@ static int __init pcie_setup(struct pci_sys_data *sys)
if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
"read transaction workaround\n");
mvebu_mbus_add_window_remap_flags("pcie0.0",
ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_WA);
mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
ORION_MBUS_PCIE_WA_ATTR,
ORION5X_PCIE_WA_PHYS_BASE,
ORION5X_PCIE_WA_SIZE);
pcie_ops.read = pcie_rd_conf_wa;
}

6
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
View File

@ -123,8 +123,10 @@ static void __init rd88f5181l_fxo_init(void)
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
RD88F5181L_FXO_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
RD88F5181L_FXO_NOR_BOOT_BASE,
RD88F5181L_FXO_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}

6
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
View File

@ -130,8 +130,10 @@ static void __init rd88f5181l_ge_init(void)
orion5x_i2c_init();
orion5x_uart0_init();
mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
RD88F5181L_GE_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
RD88F5181L_GE_NOR_BOOT_BASE,
RD88F5181L_GE_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_ge_nor_boot_flash);
i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);

13
arch/arm/mach-orion5x/rd88f5182-setup.c
View File

@ -264,11 +264,14 @@ static void __init rd88f5182_init(void)
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
RD88F5182_NOR_BOOT_SIZE);
mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
RD88F5182_NOR_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
RD88F5182_NOR_BOOT_BASE,
RD88F5182_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
ORION_MBUS_DEVBUS_ATTR(1),
RD88F5182_NOR_BASE,
RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
platform_device_register(&rd88f5182_gpio_leds);

6
arch/arm/mach-orion5x/terastation_pro2-setup.c
View File

@ -329,8 +329,10 @@ static void __init tsp2_init(void)
/*
* Configure peripherals.
*/
mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
TSP2_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
TSP2_NOR_BOOT_BASE,
TSP2_NOR_BOOT_SIZE);
platform_device_register(&tsp2_nor_flash);
orion5x_ehci0_init();

6
arch/arm/mach-orion5x/ts209-setup.c
View File

@ -286,8 +286,10 @@ static void __init qnap_ts209_init(void)
/*
* Configure peripherals.
*/
mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
QNAP_TS209_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
QNAP_TS209_NOR_BOOT_BASE,
QNAP_TS209_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts209_nor_flash);
orion5x_ehci0_init();

6
arch/arm/mach-orion5x/ts409-setup.c
View File

@ -277,8 +277,10 @@ static void __init qnap_ts409_init(void)
/*
* Configure peripherals.
*/
mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
QNAP_TS409_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
QNAP_TS409_NOR_BOOT_BASE,
QNAP_TS409_NOR_BOOT_SIZE);
platform_device_register(&qnap_ts409_nor_flash);
orion5x_ehci0_init();

6
arch/arm/mach-orion5x/wnr854t-setup.c
View File

@ -127,8 +127,10 @@ static void __init wnr854t_init(void)
orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
WNR854T_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
WNR854T_NOR_BOOT_BASE,
WNR854T_NOR_BOOT_SIZE);
platform_device_register(&wnr854t_nor_flash);
}

6
arch/arm/mach-orion5x/wrt350n-v2-setup.c
View File

@ -213,8 +213,10 @@ static void __init wrt350n_v2_init(void)
orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
WRT350N_V2_NOR_BOOT_BASE,
WRT350N_V2_NOR_BOOT_SIZE);
platform_device_register(&wrt350n_v2_nor_flash);
platform_device_register(&wrt350n_v2_leds);
platform_device_register(&wrt350n_v2_button_device);

447
drivers/bus/mvebu-mbus.c
View File

@ -35,13 +35,9 @@
*
* - Provides an API for platform code or device drivers to
* dynamically add or remove address decoding windows for the CPU ->
* device accesses. This API is mvebu_mbus_add_window(),
* mvebu_mbus_add_window_remap_flags() and
* mvebu_mbus_del_window(). Since the (target, attribute) values
* differ from one SoC family to another, the API uses a 'const char
* *' string to identify devices, and this driver is responsible for
* knowing the mapping between the name of a device and its
* corresponding (target, attribute) in the current SoC family.
* device accesses. This API is mvebu_mbus_add_window_by_id(),
* mvebu_mbus_add_window_remap_by_id() and
* mvebu_mbus_del_window().
*
* - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
* see the list of CPU -> SDRAM windows and their configuration
@ -97,33 +93,6 @@
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
struct mvebu_mbus_mapping {
const char *name;
u8 target;
u8 attr;
u8 attrmask;
};
/*
* Masks used for the 'attrmask' field of mvebu_mbus_mapping. They
* allow to get the real attribute value, discarding the special bits
* used to select a PCI MEM region or a PCI WA region. This allows the
* debugfs code to reverse-match the name of a device from its
* target/attr values.
*
* For all devices except PCI, all bits of 'attr' must be
* considered. For most SoCs, only bit 3 should be ignored (it allows
* to select between PCI MEM and PCI I/O). On Orion5x however, there
* is the special bit 5 to select a PCI WA region.
*/
#define MAPDEF_NOMASK 0xff
#define MAPDEF_PCIMASK 0xf7
#define MAPDEF_ORIONPCIMASK 0xd7
/* Macro used to define one mvebu_mbus_mapping entry */
#define MAPDEF(__n, __t, __a, __m) \
{ .name = __n, .target = __t, .attr = __a, .attrmask = __m }
struct mvebu_mbus_state;
struct mvebu_mbus_soc_data {
@ -133,7 +102,6 @@ struct mvebu_mbus_soc_data {
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
int (*show_cpu_target)(struct mvebu_mbus_state *s,
struct seq_file *seq, void *v);
const struct mvebu_mbus_mapping *map;
};
struct mvebu_mbus_state {
@ -142,6 +110,8 @@ struct mvebu_mbus_state {
struct dentry *debugfs_root;
struct dentry *debugfs_sdram;
struct dentry *debugfs_devs;
struct resource pcie_mem_aperture;
struct resource pcie_io_aperture;
const struct mvebu_mbus_soc_data *soc;
int hw_io_coherency;
};
@ -428,8 +398,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
u64 wbase, wremap;
u32 wsize;
u8 wtarget, wattr;
int enabled, i;
const char *name;
int enabled;
mvebu_mbus_read_window(mbus, win,
&enabled, &wbase, &wsize,
@ -440,18 +409,9 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
continue;
}
for (i = 0; mbus->soc->map[i].name; i++)
if (mbus->soc->map[i].target == wtarget &&
mbus->soc->map[i].attr ==
(wattr & mbus->soc->map[i].attrmask))
break;
name = mbus->soc->map[i].name ?: "unknown";
seq_printf(seq, "[%02d] %016llx - %016llx : %s",
seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x",
win, (unsigned long long)wbase,
(unsigned long long)(wbase + wsize), name);
(unsigned long long)(wbase + wsize), wtarget, wattr);
if (win < mbus->soc->num_remappable_wins) {
seq_printf(seq, " (remap %016llx)\n",
@ -576,62 +536,12 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
mvebu_mbus_dram_info.num_cs = cs;
}
static const struct mvebu_mbus_mapping armada_370_map[] = {
MAPDEF("bootrom", 1, 0xe0, MAPDEF_NOMASK),
MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
{},
};
static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
.num_wins = 20,
.num_remappable_wins = 8,
.win_cfg_offset = armada_370_xp_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = armada_370_map,
};
static const struct mvebu_mbus_mapping armada_xp_map[] = {
MAPDEF("bootrom", 1, 0x1d, MAPDEF_NOMASK),
MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
MAPDEF("devbus-cs0", 1, 0x3e, MAPDEF_NOMASK),
MAPDEF("devbus-cs1", 1, 0x3d, MAPDEF_NOMASK),
MAPDEF("devbus-cs2", 1, 0x3b, MAPDEF_NOMASK),
MAPDEF("devbus-cs3", 1, 0x37, MAPDEF_NOMASK),
MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
{},
};
static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
.num_wins = 20,
.num_remappable_wins = 8,
.win_cfg_offset = armada_370_xp_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = armada_xp_map,
};
static const struct mvebu_mbus_mapping kirkwood_map[] = {
MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK),
MAPDEF("sram", 3, 0x01, MAPDEF_NOMASK),
MAPDEF("nand", 1, 0x2f, MAPDEF_NOMASK),
{},
};
static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
@ -640,16 +550,6 @@ static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = kirkwood_map,
};
static const struct mvebu_mbus_mapping dove_map[] = {
MAPDEF("pcie0.0", 0x4, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie1.0", 0x8, 0xe0, MAPDEF_PCIMASK),
MAPDEF("cesa", 0x3, 0x01, MAPDEF_NOMASK),
MAPDEF("bootrom", 0x1, 0xfd, MAPDEF_NOMASK),
MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK),
{},
};
static const struct mvebu_mbus_soc_data dove_mbus_data = {
@ -658,18 +558,6 @@ static const struct mvebu_mbus_soc_data dove_mbus_data = {
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_dove,
.map = dove_map,
};
static const struct mvebu_mbus_mapping orion5x_map[] = {
MAPDEF("pcie0.0", 4, 0x51, MAPDEF_ORIONPCIMASK),
MAPDEF("pci0.0", 3, 0x51, MAPDEF_ORIONPCIMASK),
MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK),
MAPDEF("devbus-cs0", 1, 0x1e, MAPDEF_NOMASK),
MAPDEF("devbus-cs1", 1, 0x1d, MAPDEF_NOMASK),
MAPDEF("devbus-cs2", 1, 0x1b, MAPDEF_NOMASK),
MAPDEF("sram", 0, 0x00, MAPDEF_NOMASK),
{},
};
/*
@ -682,7 +570,6 @@ static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = orion5x_map,
};
static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
@ -691,21 +578,6 @@ static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
.win_cfg_offset = orion_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = orion5x_map,
};
static const struct mvebu_mbus_mapping mv78xx0_map[] = {
MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
{},
};
static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
@ -714,7 +586,6 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
.win_cfg_offset = mv78xx0_mbus_win_offset,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
.map = mv78xx0_map,
};
/*
@ -725,9 +596,9 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
*/
static const struct of_device_id of_mvebu_mbus_ids[] = {
{ .compatible = "marvell,armada370-mbus",
.data = &armada_370_mbus_data, },
.data = &armada_370_xp_mbus_data, },
{ .compatible = "marvell,armadaxp-mbus",
.data = &armada_xp_mbus_data, },
.data = &armada_370_xp_mbus_data, },
{ .compatible = "marvell,kirkwood-mbus",
.data = &kirkwood_mbus_data, },
{ .compatible = "marvell,dove-mbus",
@ -748,48 +619,27 @@ static const struct of_device_id of_mvebu_mbus_ids[] = {
/*
* Public API of the driver
*/
int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
size_t size, phys_addr_t remap,
unsigned int flags)
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
unsigned int attribute,
phys_addr_t base, size_t size,
phys_addr_t remap)
{
struct mvebu_mbus_state *s = &mbus_state;
u8 target, attr;
int i;
if (!s->soc->map)
return -ENODEV;
for (i = 0; s->soc->map[i].name; i++)
if (!strcmp(s->soc->map[i].name, devname))
break;
if (!s->soc->map[i].name) {
pr_err("unknown device '%s'\n", devname);
return -ENODEV;
}
target = s->soc->map[i].target;
attr = s->soc->map[i].attr;
if (flags == MVEBU_MBUS_PCI_MEM)
attr |= 0x8;
else if (flags == MVEBU_MBUS_PCI_WA)
attr |= 0x28;
if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) {
pr_err("cannot add window '%s', conflicts with another window\n",
devname);
if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
pr_err("cannot add window '%x:%x', conflicts with another window\n",
target, attribute);
return -EINVAL;
}
return mvebu_mbus_alloc_window(s, base, size, remap, target, attr);
return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
}
int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size)
int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
phys_addr_t base, size_t size)
{
return mvebu_mbus_add_window_remap_flags(devname, base, size,
MVEBU_MBUS_NO_REMAP, 0);
return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
size, MVEBU_MBUS_NO_REMAP);
}
int mvebu_mbus_del_window(phys_addr_t base, size_t size)
@ -804,6 +654,20 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size)
return 0;
}
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
{
if (!res)
return;
*res = mbus_state.pcie_mem_aperture;
}
void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
{
if (!res)
return;
*res = mbus_state.pcie_io_aperture;
}
static __init int mvebu_mbus_debugfs_init(void)
{
struct mvebu_mbus_state *s = &mbus_state;
@ -830,26 +694,14 @@ static __init int mvebu_mbus_debugfs_init(void)
}
fs_initcall(mvebu_mbus_debugfs_init);
int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
size_t mbuswins_size,
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
phys_addr_t mbuswins_phys_base,
size_t mbuswins_size,
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
{
struct mvebu_mbus_state *mbus = &mbus_state;
const struct of_device_id *of_id;
int win;
for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
if (!strcmp(of_id->compatible, soc))
break;
if (!of_id->compatible) {
pr_err("could not find a matching SoC family\n");
return -ENODEV;
}
mbus->soc = of_id->data;
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
if (!mbus->mbuswins_base)
return -ENOMEM;
@ -870,3 +722,218 @@ int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
return 0;
}
int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
size_t mbuswins_size,
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
{
const struct of_device_id *of_id;
for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
if (!strcmp(of_id->compatible, soc))
break;
if (!of_id->compatible) {
pr_err("could not find a matching SoC family\n");
return -ENODEV;
}
mbus_state.soc = of_id->data;
return mvebu_mbus_common_init(&mbus_state,
mbuswins_phys_base,
mbuswins_size,
sdramwins_phys_base,
sdramwins_size);
}
#ifdef CONFIG_OF
/*
* The window IDs in the ranges DT property have the following format:
* - bits 28 to 31: MBus custom field
* - bits 24 to 27: window target ID
* - bits 16 to 23: window attribute ID
* - bits 0 to 15: unused
*/
#define CUSTOM(id) (((id) & 0xF0000000) >> 24)
#define TARGET(id) (((id) & 0x0F000000) >> 24)
#define ATTR(id) (((id) & 0x00FF0000) >> 16)
static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
u32 base, u32 size,
u8 target, u8 attr)
{
if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
pr_err("cannot add window '%04x:%04x', conflicts with another window\n",
target, attr);
return -EBUSY;
}
if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP,
target, attr)) {
pr_err("cannot add window '%04x:%04x', too many windows\n",
target, attr);
return -ENOMEM;
}
return 0;
}
static int __init
mbus_parse_ranges(struct device_node *node,
int *addr_cells, int *c_addr_cells, int *c_size_cells,
int *cell_count, const __be32 **ranges_start,
const __be32 **ranges_end)
{
const __be32 *prop;
int ranges_len, tuple_len;
/* Allow a node with no 'ranges' property */
*ranges_start = of_get_property(node, "ranges", &ranges_len);
if (*ranges_start == NULL) {
*addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0;
*ranges_start = *ranges_end = NULL;
return 0;
}
*ranges_end = *ranges_start + ranges_len / sizeof(__be32);
*addr_cells = of_n_addr_cells(node);
prop = of_get_property(node, "#address-cells", NULL);
*c_addr_cells = be32_to_cpup(prop);
prop = of_get_property(node, "#size-cells", NULL);
*c_size_cells = be32_to_cpup(prop);
*cell_count = *addr_cells + *c_addr_cells + *c_size_cells;
tuple_len = (*cell_count) * sizeof(__be32);
if (ranges_len % tuple_len) {
pr_warn("malformed ranges entry '%s'\n", node->name);
return -EINVAL;
}
return 0;
}
static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus,
struct device_node *np)
{
int addr_cells, c_addr_cells, c_size_cells;
int i, ret, cell_count;
const __be32 *r, *ranges_start, *ranges_end;
ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells,
&c_size_cells, &cell_count,
&ranges_start, &ranges_end);
if (ret < 0)
return ret;
for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) {
u32 windowid, base, size;
u8 target, attr;
/*
* An entry with a non-zero custom field do not
* correspond to a static window, so skip it.
*/
windowid = of_read_number(r, 1);
if (CUSTOM(windowid))
continue;
target = TARGET(windowid);
attr = ATTR(windowid);
base = of_read_number(r + c_addr_cells, addr_cells);
size = of_read_number(r + c_addr_cells + addr_cells,
c_size_cells);
ret = mbus_dt_setup_win(mbus, base, size, target, attr);
if (ret < 0)
return ret;
}
return 0;
}
static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
struct resource *mem,
struct resource *io)
{
u32 reg[2];
int ret;
/*
* These are optional, so we clear them and they'll
* be zero if they are missing from the DT.
*/
memset(mem, 0, sizeof(struct resource));
memset(io, 0, sizeof(struct resource));
ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
if (!ret) {
mem->start = reg[0];
mem->end = mem->start + reg[1];
mem->flags = IORESOURCE_MEM;
}
ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
if (!ret) {
io->start = reg[0];
io->end = io->start + reg[1];
io->flags = IORESOURCE_IO;
}
}
int __init mvebu_mbus_dt_init(void)
{
struct resource mbuswins_res, sdramwins_res;
struct device_node *np, *controller;
const struct of_device_id *of_id;
const __be32 *prop;
int ret;
np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
if (!np) {
pr_err("could not find a matching SoC family\n");
return -ENODEV;
}
of_id = of_match_node(of_mvebu_mbus_ids, np);
mbus_state.soc = of_id->data;
prop = of_get_property(np, "controller", NULL);
if (!prop) {
pr_err("required 'controller' property missing\n");
return -EINVAL;
}
controller = of_find_node_by_phandle(be32_to_cpup(prop));
if (!controller) {
pr_err("could not find an 'mbus-controller' node\n");
return -ENODEV;
}
if (of_address_to_resource(controller, 0, &mbuswins_res)) {
pr_err("cannot get MBUS register address\n");
return -EINVAL;
}
if (of_address_to_resource(controller, 1, &sdramwins_res)) {
pr_err("cannot get SDRAM register address\n");
return -EINVAL;
}
/* Get optional pcie-{mem,io}-aperture properties */
mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
&mbus_state.pcie_io_aperture);
ret = mvebu_mbus_common_init(&mbus_state,
mbuswins_res.start,
resource_size(&mbuswins_res),
sdramwins_res.start,
resource_size(&sdramwins_res));
if (ret)
return ret;
/* Setup statically declared windows in the DT */
return mbus_dt_setup(&mbus_state, np);
}
#endif

72
drivers/memory/mvebu-devbus.c
View File

@ -44,14 +44,6 @@
#define READ_PARAM_OFFSET 0x0
#define WRITE_PARAM_OFFSET 0x4
static const char * const devbus_wins[] = {
"devbus-boot",
"devbus-cs0",
"devbus-cs1",
"devbus-cs2",
"devbus-cs3",
};
struct devbus_read_params {
u32 bus_width;
u32 badr_skew;
@ -208,16 +200,11 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
struct device_node *parent;
struct devbus *devbus;
struct resource *res;
struct clk *clk;
unsigned long rate;
const __be32 *ranges;
int err, cs;
int addr_cells, p_addr_cells, size_cells;
int ranges_len, tuple_len;
u32 base, size;
int err;
devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
if (!devbus)
@ -247,69 +234,14 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
if (err < 0)
return err;
/*
* Allocate an address window for this device.
* If the device probing fails, then we won't be able to
* remove the allocated address decoding window.
*
* FIXME: This is only a temporary hack! We need to do this here
* because we still don't have device tree bindings for mbus.
* Once that support is added, we will declare these address windows
* statically in the device tree, and remove the window configuration
* from here.
*/
/*
* Get the CS to choose the window string.
* This is a bit hacky, but it will be removed once the
* address windows are declared in the device tree.
*/
cs = (((unsigned long)devbus->base) % 0x400) / 8;
/*
* Parse 'ranges' property to obtain a (base,size) window tuple.
* This will be removed once the address windows
* are declared in the device tree.
*/
parent = of_get_parent(node);
if (!parent)
return -EINVAL;
p_addr_cells = of_n_addr_cells(parent);
of_node_put(parent);
addr_cells = of_n_addr_cells(node);
size_cells = of_n_size_cells(node);
tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32);
ranges = of_get_property(node, "ranges", &ranges_len);
if (ranges == NULL || ranges_len != tuple_len)
return -EINVAL;
base = of_translate_address(node, ranges + addr_cells);
if (base == OF_BAD_ADDR)
return -EINVAL;
size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells);
/*
* Create an mbus address windows.
* FIXME: Remove this, together with the above code, once the
* address windows are declared in the device tree.
*/
err = mvebu_mbus_add_window(devbus_wins[cs], base, size);
if (err < 0)
return err;
/*
* We need to create a child device explicitly from here to
* guarantee that the child will be probed after the timing
* parameters for the bus are written.
*/
err = of_platform_populate(node, NULL, NULL, dev);
if (err < 0) {
mvebu_mbus_del_window(base, size);
if (err < 0)
return err;
}
return 0;
}

117
drivers/pci/host/pci-mvebu.c
View File

@ -123,6 +123,10 @@ struct mvebu_pcie_port {
u32 port;
u32 lane;
int devfn;
unsigned int mem_target;
unsigned int mem_attr;
unsigned int io_target;
unsigned int io_attr;
struct clk *clk;
struct mvebu_sw_pci_bridge bridge;
struct device_node *dn;
@ -307,10 +311,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
(port->bridge.iolimitupper << 16)) -
iobase);
mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
port->iowin_size,
iobase,
MVEBU_MBUS_PCI_IO);
mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
port->iowin_base, port->iowin_size,
iobase);
pci_ioremap_io(iobase, port->iowin_base);
}
@ -342,10 +345,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
port->memwin_base;
mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
port->memwin_size,
MVEBU_MBUS_NO_REMAP,
MVEBU_MBUS_PCI_MEM);
mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
port->memwin_base, port->memwin_size);
}
/*
@ -661,6 +662,8 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
for (i = 0; i < pcie->nports; i++) {
struct mvebu_pcie_port *port = &pcie->ports[i];
if (!port->base)
continue;
mvebu_pcie_setup_hw(port);
}
@ -755,12 +758,54 @@ mvebu_pcie_map_registers(struct platform_device *pdev,
return devm_request_and_ioremap(&pdev->dev, &regs);
}
#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
#define DT_TYPE_IO 0x1
#define DT_TYPE_MEM32 0x2
#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
unsigned long type, int *tgt, int *attr)
{
const int na = 3, ns = 2;
const __be32 *range;
int rlen, nranges, rangesz, pna, i;
range = of_get_property(np, "ranges", &rlen);
if (!range)
return -EINVAL;
pna = of_n_addr_cells(np);
rangesz = pna + na + ns;
nranges = rlen / sizeof(__be32) / rangesz;
for (i = 0; i < nranges; i++) {
u32 flags = of_read_number(range, 1);
u32 slot = of_read_number(range, 2);
u64 cpuaddr = of_read_number(range + na, pna);
unsigned long rtype;
if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
rtype = IORESOURCE_IO;
else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
rtype = IORESOURCE_MEM;
if (slot == PCI_SLOT(devfn) && type == rtype) {
*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
return 0;
}
range += rangesz;
}
return -ENOENT;
}
static int __init mvebu_pcie_probe(struct platform_device *pdev)
{
struct mvebu_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
struct of_pci_range range;
struct of_pci_range_parser parser;
struct device_node *child;
int i, ret;
@ -771,29 +816,25 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
pcie->pdev = pdev;
if (of_pci_range_parser_init(&parser, np))
/* Get the PCIe memory and I/O aperture */
mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
if (resource_size(&pcie->mem) == 0) {
dev_err(&pdev->dev, "invalid memory aperture size\n");
return -EINVAL;
/* Get the I/O and memory ranges from DT */
for_each_of_pci_range(&parser, &range) {
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
if (restype == IORESOURCE_IO) {
of_pci_range_to_resource(&range, np, &pcie->io);
of_pci_range_to_resource(&range, np, &pcie->realio);
pcie->io.name = "I/O";
pcie->realio.start = max_t(resource_size_t,
PCIBIOS_MIN_IO,
range.pci_addr);
pcie->realio.end = min_t(resource_size_t,
IO_SPACE_LIMIT,
range.pci_addr + range.size);
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pcie->mem);
pcie->mem.name = "MEM";
}
}
mvebu_mbus_get_pcie_io_aperture(&pcie->io);
if (resource_size(&pcie->io) == 0) {
dev_err(&pdev->dev, "invalid I/O aperture size\n");
return -EINVAL;
}
pcie->realio.flags = pcie->io.flags;
pcie->realio.start = PCIBIOS_MIN_IO;
pcie->realio.end = min_t(resource_size_t,
IO_SPACE_LIMIT,
resource_size(&pcie->io));
/* Get the bus range */
ret = of_pci_parse_bus_range(np, &pcie->busn);
if (ret) {
@ -841,6 +882,22 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
if (port->devfn < 0)
continue;
ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM,
&port->mem_target, &port->mem_attr);
if (ret < 0) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n",
port->port, port->lane);
continue;
}
ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
&port->io_target, &port->io_attr);
if (ret < 0) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
port->port, port->lane);
continue;
}
port->base = mvebu_pcie_map_registers(pdev, child, port);
if (!port->base) {
dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",

16
include/linux/mbus.h
View File

@ -11,6 +11,8 @@
#ifndef __LINUX_MBUS_H
#define __LINUX_MBUS_H
struct resource;
struct mbus_dram_target_info
{
/*
@ -59,14 +61,18 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
}
#endif
int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
size_t size, phys_addr_t remap,
unsigned int flags);
int mvebu_mbus_add_window(const char *devname, phys_addr_t base,
size_t size);
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
unsigned int attribute,
phys_addr_t base, size_t size,
phys_addr_t remap);
int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
phys_addr_t base, size_t size);
int mvebu_mbus_del_window(phys_addr_t base, size_t size);
int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
size_t mbus_size, phys_addr_t sdram_phys_base,
size_t sdram_size);
int mvebu_mbus_dt_init(void);
#endif /* __LINUX_MBUS_H */