Merge remote-tracking branch 'agust/next' into merge
This commit is contained in:
Benjamin Herrenschmidt
commit
f81f5e14de
236
arch/powerpc/boot/dts/charon.dts
Normal file
236
arch/powerpc/boot/dts/charon.dts
Normal file
@ -0,0 +1,236 @@
|
||||
/*
|
||||
* charon board Device Tree Source
|
||||
*
|
||||
* Copyright (C) 2007 Semihalf
|
||||
* Marian Balakowicz <m8@semihalf.com>
|
||||
*
|
||||
* Copyright (C) 2010 DENX Software Engineering GmbH
|
||||
* Heiko Schocher <hs@denx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "anon,charon";
|
||||
compatible = "anon,charon";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&mpc5200_pic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5200@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-size = <0x4000>; // L1, 16K
|
||||
i-cache-size = <0x4000>; // L1, 16K
|
||||
timebase-frequency = <0>; // from bootloader
|
||||
bus-frequency = <0>; // from bootloader
|
||||
clock-frequency = <0>; // from bootloader
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>; // 128MB
|
||||
};
|
||||
|
||||
soc5200@f0000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc5200-immr";
|
||||
ranges = <0 0xf0000000 0x0000c000>;
|
||||
reg = <0xf0000000 0x00000100>;
|
||||
bus-frequency = <0>; // from bootloader
|
||||
system-frequency = <0>; // from bootloader
|
||||
|
||||
cdm@200 {
|
||||
compatible = "fsl,mpc5200-cdm";
|
||||
reg = <0x200 0x38>;
|
||||
};
|
||||
|
||||
mpc5200_pic: interrupt-controller@500 {
|
||||
// 5200 interrupts are encoded into two levels;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
compatible = "fsl,mpc5200-pic";
|
||||
reg = <0x500 0x80>;
|
||||
};
|
||||
|
||||
timer@600 { // General Purpose Timer
|
||||
compatible = "fsl,mpc5200-gpt";
|
||||
reg = <0x600 0x10>;
|
||||
interrupts = <1 9 0>;
|
||||
fsl,has-wdt;
|
||||
};
|
||||
|
||||
can@900 {
|
||||
compatible = "fsl,mpc5200-mscan";
|
||||
interrupts = <2 17 0>;
|
||||
reg = <0x900 0x80>;
|
||||
};
|
||||
|
||||
can@980 {
|
||||
compatible = "fsl,mpc5200-mscan";
|
||||
interrupts = <2 18 0>;
|
||||
reg = <0x980 0x80>;
|
||||
};
|
||||
|
||||
gpio_simple: gpio@b00 {
|
||||
compatible = "fsl,mpc5200-gpio";
|
||||
reg = <0xb00 0x40>;
|
||||
interrupts = <1 7 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
usb@1000 {
|
||||
compatible = "fsl,mpc5200-ohci","ohci-be";
|
||||
reg = <0x1000 0xff>;
|
||||
interrupts = <2 6 0>;
|
||||
};
|
||||
|
||||
dma-controller@1200 {
|
||||
device_type = "dma-controller";
|
||||
compatible = "fsl,mpc5200-bestcomm";
|
||||
reg = <0x1200 0x80>;
|
||||
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
||||
3 4 0 3 5 0 3 6 0 3 7 0
|
||||
3 8 0 3 9 0 3 10 0 3 11 0
|
||||
3 12 0 3 13 0 3 14 0 3 15 0>;
|
||||
};
|
||||
|
||||
xlb@1f00 {
|
||||
compatible = "fsl,mpc5200-xlb";
|
||||
reg = <0x1f00 0x100>;
|
||||
};
|
||||
|
||||
serial@2000 { // PSC1
|
||||
compatible = "fsl,mpc5200-psc-uart";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <2 1 0>;
|
||||
};
|
||||
|
||||
serial@2400 { // PSC3
|
||||
compatible = "fsl,mpc5200-psc-uart";
|
||||
reg = <0x2400 0x100>;
|
||||
interrupts = <2 3 0>;
|
||||
};
|
||||
|
||||
ethernet@3000 {
|
||||
compatible = "fsl,mpc5200-fec";
|
||||
reg = <0x3000 0x400>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <2 5 0>;
|
||||
fixed-link = <1 1 100 0 0>;
|
||||
};
|
||||
|
||||
mdio@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200-mdio";
|
||||
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
|
||||
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
||||
};
|
||||
|
||||
ata@3a00 {
|
||||
compatible = "fsl,mpc5200-ata";
|
||||
reg = <0x3a00 0x100>;
|
||||
interrupts = <2 7 0>;
|
||||
};
|
||||
|
||||
i2c@3d00 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d00 0x40>;
|
||||
interrupts = <2 15 0>;
|
||||
};
|
||||
|
||||
|
||||
i2c@3d40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5200-i2c","fsl-i2c";
|
||||
reg = <0x3d40 0x40>;
|
||||
interrupts = <2 16 0>;
|
||||
|
||||
dtt@28 {
|
||||
compatible = "national,lm80";
|
||||
reg = <0x28>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1374";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
sram@8000 {
|
||||
compatible = "fsl,mpc5200-sram";
|
||||
reg = <0x8000 0x4000>;
|
||||
};
|
||||
};
|
||||
|
||||
localbus {
|
||||
compatible = "fsl,mpc5200-lpb","simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ranges = < 0 0 0xfc000000 0x02000000
|
||||
1 0 0xe0000000 0x04000000 // CS1 range, SM501
|
||||
3 0 0xe8000000 0x00080000>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0 0x02000000>;
|
||||
bank-width = <4>;
|
||||
device-width = <2>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
};
|
||||
|
||||
display@1,0 {
|
||||
compatible = "smi,sm501";
|
||||
reg = <1 0x00000000 0x00800000
|
||||
1 0x03e00000 0x00200000>;
|
||||
mode = "640x480-32@60";
|
||||
interrupts = <1 1 3>;
|
||||
little-endian;
|
||||
};
|
||||
|
||||
mram0@3,0 {
|
||||
compatible = "mtd-ram";
|
||||
reg = <3 0x00000 0x80000>;
|
||||
bank-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
pci@f0000d00 {
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
compatible = "fsl,mpc5200-pci";
|
||||
reg = <0xf0000d00 0x100>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
|
||||
0xc000 0 0 2 &mpc5200_pic 0 0 3
|
||||
0xc000 0 0 3 &mpc5200_pic 0 0 3
|
||||
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
|
||||
clock-frequency = <0>; // From boot loader
|
||||
interrupts = <2 8 0 2 9 0 2 10 0>;
|
||||
bus-range = <0 0>;
|
||||
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
|
||||
0x02000000 0 0x90000000 0x90000000 0 0x10000000
|
||||
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
|
||||
};
|
||||
};
|
||||
@ -1,9 +1,10 @@
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_SYSCTL_SYSCALL is not set
|
||||
# CONFIG_KALLSYMS is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y
|
||||
CONFIG_PPC_MPC5200_BUGFIX=y
|
||||
# CONFIG_PPC_PMAC is not set
|
||||
CONFIG_PPC_BESTCOMM=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_PM=y
|
||||
# CONFIG_PCI is not set
|
||||
CONFIG_NET=y
|
||||
@ -38,17 +38,18 @@ CONFIG_MTD=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_ROM=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=32768
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_ATA=y
|
||||
@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y
|
||||
CONFIG_PATA_PLATFORM=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_LXT_PHY=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_FEC_MPC52xx=y
|
||||
# CONFIG_NETDEV_1000 is not set
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_MPC52xx=y
|
||||
CONFIG_SERIAL_MPC52xx_CONSOLE=y
|
||||
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
|
||||
@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MPC=y
|
||||
CONFIG_SENSORS_LM80=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_MFD_SM501=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_FOREIGN_ENDIAN=y
|
||||
CONFIG_FB_SM501=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
CONFIG_RTC_DRV_DS1374=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
|
||||
@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
|
||||
|
||||
/* list of the supported boards */
|
||||
static const char *board[] __initdata = {
|
||||
"anon,charon",
|
||||
"intercontrol,digsy-mtc",
|
||||
"manroland,mucmc52",
|
||||
"manroland,uc101",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user