Merge tag 'peci-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-next

Iwona writes:

Update peci-next for v6.6-rc1

* Add Intel Sapphire Rapids support.
* Add Nuvoton controller driver.

* tag 'peci-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux:
  arm64: dts: nuvoton: Add PECI controller node
  ARM: dts: nuvoton: Add PECI controller node
  peci: Add peci-npcm controller driver
  dt-bindings: Add bindings for peci-npcm
  hwmon: (peci/dimmtemp) Add Sapphire Rapids support
  hwmon: (peci/cputemp) Add Intel Sapphire Rapids support
  peci: cpu: Add Intel Sapphire Rapids support

Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/nuvoton,npcm-peci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton PECI Bus
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-peci
+      - nuvoton,npcm845-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the APB clock.
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    peci-controller@f0100000 {
+      compatible = "nuvoton,npcm750-peci";
+      reg = <0xf0100000 0x200>;
+      interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk NPCM7XX_CLK_APB3>;
+      cmd-timeout-ms = <1000>;
+    };
+...

arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi

@@ -220,6 +220,15 @@
 				};
 			};
 
+			peci: peci-controller@f0100000 {
+				compatible = "nuvoton,npcm750-peci";
+				reg = <0xf0100000 0x200>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
 			spi0: spi@200000 {
 				compatible = "nuvoton,npcm750-pspi";
 				reg = <0x200000 0x1000>;

arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi

@@ -68,6 +68,15 @@
 			ranges = <0x0 0x0 0xf0000000 0x00300000>,
 				<0xfff00000 0x0 0xfff00000 0x00016000>;
 
+			peci: peci-controller@100000 {
+				compatible = "nuvoton,npcm845-peci";
+				reg = <0x100000 0x1000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM8XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
 			timer0: timer@8000 {
 				compatible = "nuvoton,npcm845-timer";
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;

drivers/hwmon/peci/cputemp.c

@@ -363,6 +363,7 @@ static int init_core_mask(struct peci_cputemp *priv)
 	switch (peci_dev->info.model) {
 	case INTEL_FAM6_ICELAKE_X:
 	case INTEL_FAM6_ICELAKE_D:
+	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 		ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
 					     reg->func, reg->offset + 4, &data);
 		if (ret)
@@ -531,6 +532,13 @@ static struct resolved_cores_reg resolved_cores_reg_icx = {
 	.offset = 0xd0,
 };
 
+static struct resolved_cores_reg resolved_cores_reg_spr = {
+	.bus = 31,
+	.dev = 30,
+	.func = 6,
+	.offset = 0x80,
+};
+
 static const struct cpu_info cpu_hsx = {
 	.reg		= &resolved_cores_reg_hsx,
 	.min_peci_revision = 0x33,
@@ -549,6 +557,12 @@ static const struct cpu_info cpu_icx = {
 	.thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
 };
 
+static const struct cpu_info cpu_spr = {
+	.reg		= &resolved_cores_reg_spr,
+	.min_peci_revision = 0x40,
+	.thermal_margin_to_millidegree = &dts_ten_dot_six_to_millidegree,
+};
+
 static const struct auxiliary_device_id peci_cputemp_ids[] = {
 	{
 		.name = "peci_cpu.cputemp.hsx",
@@ -574,6 +588,10 @@ static const struct auxiliary_device_id peci_cputemp_ids[] = {
 		.name = "peci_cpu.cputemp.icxd",
 		.driver_data = (kernel_ulong_t)&cpu_icx,
 	},
+	{
+		.name = "peci_cpu.cputemp.spr",
+		.driver_data = (kernel_ulong_t)&cpu_spr,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);

drivers/hwmon/peci/dimmtemp.c

@@ -30,6 +30,8 @@
 #define DIMM_IDX_MAX_ON_ICX	2
 #define CHAN_RANK_MAX_ON_ICXD	4
 #define DIMM_IDX_MAX_ON_ICXD	2
+#define CHAN_RANK_MAX_ON_SPR	8
+#define DIMM_IDX_MAX_ON_SPR	2
 
 #define CHAN_RANK_MAX		CHAN_RANK_MAX_ON_HSX
 #define DIMM_IDX_MAX		DIMM_IDX_MAX_ON_HSX
@@ -530,6 +532,43 @@ read_thresholds_icx(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u
 	return 0;
 }
 
+static int
+read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
+{
+	u32 reg_val;
+	u64 offset;
+	int ret;
+	u8 dev;
+
+	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd4, &reg_val);
+	if (ret || !(reg_val & BIT(31)))
+		return -ENODATA; /* Use default or previous value */
+
+	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd0, &reg_val);
+	if (ret)
+		return -ENODATA; /* Use default or previous value */
+
+	/*
+	 * Device 26, Offset 219a8: IMC 0 channel 0 -> rank 0
+	 * Device 26, Offset 299a8: IMC 0 channel 1 -> rank 1
+	 * Device 27, Offset 219a8: IMC 1 channel 0 -> rank 2
+	 * Device 27, Offset 299a8: IMC 1 channel 1 -> rank 3
+	 * Device 28, Offset 219a8: IMC 2 channel 0 -> rank 4
+	 * Device 28, Offset 299a8: IMC 2 channel 1 -> rank 5
+	 * Device 29, Offset 219a8: IMC 3 channel 0 -> rank 6
+	 * Device 29, Offset 299a8: IMC 3 channel 1 -> rank 7
+	 */
+	dev = 26 + chan_rank / 2;
+	offset = 0x219a8 + dimm_order * 4 + (chan_rank % 2) * 0x8000;
+
+	ret = peci_mmio_read(priv->peci_dev, 0, GET_CPU_SEG(reg_val), GET_CPU_BUS(reg_val),
+			     dev, 0, offset, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static const struct dimm_info dimm_hsx = {
 	.chan_rank_max	= CHAN_RANK_MAX_ON_HSX,
 	.dimm_idx_max	= DIMM_IDX_MAX_ON_HSX,
@@ -572,6 +611,13 @@ static const struct dimm_info dimm_icxd = {
 	.read_thresholds = &read_thresholds_icx,
 };
 
+static const struct dimm_info dimm_spr = {
+	.chan_rank_max	= CHAN_RANK_MAX_ON_SPR,
+	.dimm_idx_max	= DIMM_IDX_MAX_ON_SPR,
+	.min_peci_revision = 0x40,
+	.read_thresholds = &read_thresholds_spr,
+};
+
 static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
 	{
 		.name = "peci_cpu.dimmtemp.hsx",
@@ -597,6 +643,10 @@ static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
 		.name = "peci_cpu.dimmtemp.icxd",
 		.driver_data = (kernel_ulong_t)&dimm_icxd,
 	},
+	{
+		.name = "peci_cpu.dimmtemp.spr",
+		.driver_data = (kernel_ulong_t)&dimm_spr,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);

drivers/peci/controller/Kconfig

@@ -16,3 +16,19 @@ config PECI_ASPEED
 
 	  This driver can also be built as a module. If so, the module will
 	  be called peci-aspeed.
+
+config PECI_NPCM
+	tristate "Nuvoton NPCM PECI support"
+	depends on ARCH_NPCM || COMPILE_TEST
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  This option enables PECI controller driver for Nuvoton NPCM7XX
+	  and NPCM8XX SoCs. It allows BMC to discover devices connected
+	  to it and communicate with them using PECI protocol.
+
+	  Say Y here if you want support for the Platform Environment Control
+	  Interface (PECI) bus adapter driver on the Nuvoton NPCM SoCs.
+
+	  This support is also available as a module. If so, the module
+	  will be called peci-npcm.

drivers/peci/controller/Makefile

@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_PECI_ASPEED)	+= peci-aspeed.o
+obj-$(CONFIG_PECI_NPCM)		+= peci-npcm.o

drivers/peci/controller/peci-npcm.c

@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Nuvoton Technology corporation
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/peci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* NPCM GCR module */
+#define NPCM_INTCR3_OFFSET	0x9C
+#define NPCM_INTCR3_PECIVSEL	BIT(19)
+
+/* NPCM PECI Registers */
+#define NPCM_PECI_CTL_STS	0x00
+#define NPCM_PECI_RD_LENGTH	0x04
+#define NPCM_PECI_ADDR		0x08
+#define NPCM_PECI_CMD		0x0C
+#define NPCM_PECI_CTL2		0x10
+#define NPCM_PECI_WR_LENGTH	0x1C
+#define NPCM_PECI_PDDR		0x2C
+#define NPCM_PECI_DAT_INOUT(n)	(0x100 + ((n) * 4))
+
+#define NPCM_PECI_MAX_REG	0x200
+
+/* NPCM_PECI_CTL_STS - 0x00 : Control Register */
+#define NPCM_PECI_CTRL_DONE_INT_EN	BIT(6)
+#define NPCM_PECI_CTRL_ABRT_ERR		BIT(4)
+#define NPCM_PECI_CTRL_CRC_ERR		BIT(3)
+#define NPCM_PECI_CTRL_DONE		BIT(1)
+#define NPCM_PECI_CTRL_START_BUSY	BIT(0)
+
+/* NPCM_PECI_RD_LENGTH - 0x04 : Command Register */
+#define NPCM_PECI_RD_LEN_MASK		GENMASK(6, 0)
+
+/* NPCM_PECI_CMD - 0x10 : Command Register */
+#define NPCM_PECI_CTL2_MASK		GENMASK(7, 6)
+
+/* NPCM_PECI_WR_LENGTH - 0x1C : Command Register */
+#define NPCM_PECI_WR_LEN_MASK		GENMASK(6, 0)
+
+/* NPCM_PECI_PDDR - 0x2C : Command Register */
+#define NPCM_PECI_PDDR_MASK		GENMASK(4, 0)
+
+#define NPCM_PECI_INT_MASK		(NPCM_PECI_CTRL_ABRT_ERR | \
+					 NPCM_PECI_CTRL_CRC_ERR  | \
+					 NPCM_PECI_CTRL_DONE)
+
+#define NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC	(50 * USEC_PER_MSEC)
+#define NPCM_PECI_IDLE_CHECK_INTERVAL_USEC	(10 * USEC_PER_MSEC)
+#define NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT	1000
+#define NPCM_PECI_CMD_TIMEOUT_MS_MAX		60000
+#define NPCM_PECI_HOST_NEG_BIT_RATE_DEFAULT	15
+#define NPCM_PECI_PULL_DOWN_DEFAULT		0
+
+struct npcm_peci {
+	u32			cmd_timeout_ms;
+	struct completion	xfer_complete;
+	struct regmap		*regmap;
+	u32			status;
+	spinlock_t		lock; /* to sync completion status handling */
+	struct peci_controller *controller;
+	struct device		*dev;
+	struct clk		*clk;
+	int			irq;
+};
+
+static int npcm_peci_xfer(struct peci_controller *controller, u8 addr, struct peci_request *req)
+{
+	struct npcm_peci *priv = dev_get_drvdata(controller->dev.parent);
+	unsigned long timeout = msecs_to_jiffies(priv->cmd_timeout_ms);
+	unsigned int msg_rd;
+	u32 cmd_sts;
+	int i, ret;
+
+	/* Check command sts and bus idle state */
+	ret = regmap_read_poll_timeout(priv->regmap, NPCM_PECI_CTL_STS, cmd_sts,
+				       !(cmd_sts & NPCM_PECI_CTRL_START_BUSY),
+				       NPCM_PECI_IDLE_CHECK_INTERVAL_USEC,
+				       NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC);
+	if (ret)
+		return ret; /* -ETIMEDOUT */
+
+	spin_lock_irq(&priv->lock);
+	reinit_completion(&priv->xfer_complete);
+
+	regmap_write(priv->regmap, NPCM_PECI_ADDR, addr);
+	regmap_write(priv->regmap, NPCM_PECI_RD_LENGTH, NPCM_PECI_WR_LEN_MASK & req->rx.len);
+	regmap_write(priv->regmap, NPCM_PECI_WR_LENGTH, NPCM_PECI_WR_LEN_MASK & req->tx.len);
+
+	if (req->tx.len) {
+		regmap_write(priv->regmap, NPCM_PECI_CMD, req->tx.buf[0]);
+
+		for (i = 0; i < (req->tx.len - 1); i++)
+			regmap_write(priv->regmap, NPCM_PECI_DAT_INOUT(i), req->tx.buf[i + 1]);
+	}
+
+#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG)
+	dev_dbg(priv->dev, "addr : %#02x, tx.len : %#02x, rx.len : %#02x\n",
+		addr, req->tx.len, req->rx.len);
+	print_hex_dump_bytes("TX : ", DUMP_PREFIX_NONE, req->tx.buf, req->tx.len);
+#endif
+
+	priv->status = 0;
+	regmap_update_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_CTRL_START_BUSY,
+			   NPCM_PECI_CTRL_START_BUSY);
+
+	spin_unlock_irq(&priv->lock);
+
+	ret = wait_for_completion_interruptible_timeout(&priv->xfer_complete, timeout);
+	if (ret < 0)
+		return ret;
+
+	if (ret == 0) {
+		dev_dbg(priv->dev, "timeout waiting for a response\n");
+		return -ETIMEDOUT;
+	}
+
+	spin_lock_irq(&priv->lock);
+
+	if (priv->status != NPCM_PECI_CTRL_DONE) {
+		spin_unlock_irq(&priv->lock);
+		dev_dbg(priv->dev, "no valid response, status: %#02x\n", priv->status);
+		return -EIO;
+	}
+
+	regmap_write(priv->regmap, NPCM_PECI_CMD, 0);
+
+	for (i = 0; i < req->rx.len; i++) {
+		regmap_read(priv->regmap, NPCM_PECI_DAT_INOUT(i), &msg_rd);
+		req->rx.buf[i] = (u8)msg_rd;
+	}
+
+	spin_unlock_irq(&priv->lock);
+
+#if IS_ENABLED(CONFIG_DYNAMIC_DEBUG)
+	print_hex_dump_bytes("RX : ", DUMP_PREFIX_NONE, req->rx.buf, req->rx.len);
+#endif
+	return 0;
+}
+
+static irqreturn_t npcm_peci_irq_handler(int irq, void *arg)
+{
+	struct npcm_peci *priv = arg;
+	u32 status_ack = 0;
+	u32 status;
+
+	spin_lock(&priv->lock);
+	regmap_read(priv->regmap, NPCM_PECI_CTL_STS, &status);
+	priv->status |= (status & NPCM_PECI_INT_MASK);
+
+	if (status & NPCM_PECI_CTRL_CRC_ERR)
+		status_ack |= NPCM_PECI_CTRL_CRC_ERR;
+
+	if (status & NPCM_PECI_CTRL_ABRT_ERR)
+		status_ack |= NPCM_PECI_CTRL_ABRT_ERR;
+
+	/*
+	 * All commands should be ended up with a NPCM_PECI_CTRL_DONE
+	 * bit set even in an error case.
+	 */
+	if (status & NPCM_PECI_CTRL_DONE) {
+		status_ack |= NPCM_PECI_CTRL_DONE;
+		complete(&priv->xfer_complete);
+	}
+
+	regmap_write_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_INT_MASK, status_ack);
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+}
+
+static int npcm_peci_init_ctrl(struct npcm_peci *priv)
+{
+	u32 cmd_sts;
+	int ret;
+
+	priv->clk = devm_clk_get_enabled(priv->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(priv->dev, "failed to get ref clock\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	ret = device_property_read_u32(priv->dev, "cmd-timeout-ms", &priv->cmd_timeout_ms);
+	if (ret) {
+		priv->cmd_timeout_ms = NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT;
+	} else if (priv->cmd_timeout_ms > NPCM_PECI_CMD_TIMEOUT_MS_MAX ||
+		   priv->cmd_timeout_ms == 0) {
+		dev_warn(priv->dev, "invalid cmd-timeout-ms: %u, falling back to: %u\n",
+			 priv->cmd_timeout_ms, NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT);
+
+		priv->cmd_timeout_ms = NPCM_PECI_CMD_TIMEOUT_MS_DEFAULT;
+	}
+
+	regmap_update_bits(priv->regmap, NPCM_PECI_CTL2, NPCM_PECI_CTL2_MASK,
+			   NPCM_PECI_PULL_DOWN_DEFAULT << 6);
+
+	regmap_update_bits(priv->regmap, NPCM_PECI_PDDR, NPCM_PECI_PDDR_MASK,
+			   NPCM_PECI_HOST_NEG_BIT_RATE_DEFAULT);
+
+	ret = regmap_read_poll_timeout(priv->regmap, NPCM_PECI_CTL_STS, cmd_sts,
+				       !(cmd_sts & NPCM_PECI_CTRL_START_BUSY),
+				       NPCM_PECI_IDLE_CHECK_INTERVAL_USEC,
+				       NPCM_PECI_IDLE_CHECK_TIMEOUT_USEC);
+	if (ret)
+		return ret; /* -ETIMEDOUT */
+
+	/* PECI interrupt enable */
+	regmap_update_bits(priv->regmap, NPCM_PECI_CTL_STS, NPCM_PECI_CTRL_DONE_INT_EN,
+			   NPCM_PECI_CTRL_DONE_INT_EN);
+
+	return 0;
+}
+
+static const struct regmap_config npcm_peci_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = NPCM_PECI_MAX_REG,
+	.fast_io = true,
+};
+
+static struct peci_controller_ops npcm_ops = {
+	.xfer = npcm_peci_xfer,
+};
+
+static int npcm_peci_probe(struct platform_device *pdev)
+{
+	struct peci_controller *controller;
+	struct npcm_peci *priv;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, priv);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &npcm_peci_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	ret = devm_request_irq(&pdev->dev, priv->irq, npcm_peci_irq_handler,
+			       0, "peci-npcm-irq", priv);
+	if (ret)
+		return ret;
+
+	init_completion(&priv->xfer_complete);
+	spin_lock_init(&priv->lock);
+
+	ret = npcm_peci_init_ctrl(priv);
+	if (ret)
+		return ret;
+
+	controller = devm_peci_controller_add(priv->dev, &npcm_ops);
+	if (IS_ERR(controller))
+		return dev_err_probe(priv->dev, PTR_ERR(controller),
+				     "failed to add npcm peci controller\n");
+
+	priv->controller = controller;
+
+	return 0;
+}
+
+static const struct of_device_id npcm_peci_of_table[] = {
+	{ .compatible = "nuvoton,npcm750-peci", },
+	{ .compatible = "nuvoton,npcm845-peci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, npcm_peci_of_table);
+
+static struct platform_driver npcm_peci_driver = {
+	.probe  = npcm_peci_probe,
+	.driver = {
+		.name           = KBUILD_MODNAME,
+		.of_match_table = npcm_peci_of_table,
+	},
+};
+module_platform_driver(npcm_peci_driver);
+
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_DESCRIPTION("NPCM PECI driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PECI);

drivers/peci/cpu.c

@@ -323,6 +323,11 @@ static const struct peci_device_id peci_cpu_device_ids[] = {
 		.model	= INTEL_FAM6_ICELAKE_D,
 		.data	= "icxd",
 	},
+	{ /* Sapphire Rapids Xeon */
+		.family	= 6,
+		.model	= INTEL_FAM6_SAPPHIRERAPIDS_X,
+		.data	= "spr",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids);