Merge branch 'master' into next
Merge master back into next, this allows us to resolve some conflicts in arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so that they are in alphabetical order again.
This commit is contained in:
Michael Ellerman
commit
f96271cefe
30
Documentation/ABI/testing/sysfs-bus-event_source-devices-dsa
Normal file
30
Documentation/ABI/testing/sysfs-bus-event_source-devices-dsa
Normal file
@ -0,0 +1,30 @@
|
||||
What: /sys/bus/event_source/devices/dsa*/format
|
||||
Date: April 2021
|
||||
KernelVersion: 5.13
|
||||
Contact: Tom Zanussi <tom.zanussi@linux.intel.com>
|
||||
Description: Read-only. Attribute group to describe the magic bits
|
||||
that go into perf_event_attr.config or
|
||||
perf_event_attr.config1 for the IDXD DSA pmu. (See also
|
||||
ABI/testing/sysfs-bus-event_source-devices-format).
|
||||
|
||||
Each attribute in this group defines a bit range in
|
||||
perf_event_attr.config or perf_event_attr.config1.
|
||||
All supported attributes are listed below (See the
|
||||
IDXD DSA Spec for possible attribute values)::
|
||||
|
||||
event_category = "config:0-3" - event category
|
||||
event = "config:4-31" - event ID
|
||||
|
||||
filter_wq = "config1:0-31" - workqueue filter
|
||||
filter_tc = "config1:32-39" - traffic class filter
|
||||
filter_pgsz = "config1:40-43" - page size filter
|
||||
filter_sz = "config1:44-51" - transfer size filter
|
||||
filter_eng = "config1:52-59" - engine filter
|
||||
|
||||
What: /sys/bus/event_source/devices/dsa*/cpumask
|
||||
Date: April 2021
|
||||
KernelVersion: 5.13
|
||||
Contact: Tom Zanussi <tom.zanussi@linux.intel.com>
|
||||
Description: Read-only. This file always returns the cpu to which the
|
||||
IDXD DSA pmu is bound for access to all dsa pmu
|
||||
performance monitoring events.
|
||||
@ -285,7 +285,7 @@ Description: Disable L3 cache indices
|
||||
|
||||
All AMD processors with L3 caches provide this functionality.
|
||||
For details, see BKDGs at
|
||||
http://developer.amd.com/documentation/guides/Pages/default.aspx
|
||||
https://www.amd.com/en/support/tech-docs?keyword=bios+kernel
|
||||
|
||||
|
||||
What: /sys/devices/system/cpu/cpufreq/boost
|
||||
|
||||
@ -15,3 +15,12 @@ Description: Reports the model identification provided by the touchscreen, fo
|
||||
Access: Read
|
||||
|
||||
Valid values: Represented as string
|
||||
|
||||
What: /sys/bus/i2c/devices/xxx/type
|
||||
Date: Jan 2021
|
||||
Contact: linux-input@vger.kernel.org
|
||||
Description: Reports the type identification provided by the touchscreen, for example "PCAP82H80 Series"
|
||||
|
||||
Access: Read
|
||||
|
||||
Valid values: Represented as string
|
||||
|
||||
@ -276,7 +276,7 @@ Date April 2019
|
||||
Contact: "Daniel Rosenberg" <drosen@google.com>
|
||||
Description: If checkpoint=disable, it displays the number of blocks that
|
||||
are unusable.
|
||||
If checkpoint=enable it displays the enumber of blocks that
|
||||
If checkpoint=enable it displays the number of blocks that
|
||||
would be unusable if checkpoint=disable were to be set.
|
||||
|
||||
What: /sys/fs/f2fs/<disk>/encoding
|
||||
@ -409,3 +409,32 @@ Description: Give a way to change checkpoint merge daemon's io priority.
|
||||
I/O priority "3". We can select the class between "rt" and "be",
|
||||
and set the I/O priority within valid range of it. "," delimiter
|
||||
is necessary in between I/O class and priority number.
|
||||
|
||||
What: /sys/fs/f2fs/<disk>/ovp_segments
|
||||
Date: March 2021
|
||||
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
|
||||
Description: Shows the number of overprovision segments.
|
||||
|
||||
What: /sys/fs/f2fs/<disk>/compr_written_block
|
||||
Date: March 2021
|
||||
Contact: "Daeho Jeong" <daehojeong@google.com>
|
||||
Description: Show the block count written after compression since mount. Note
|
||||
that when the compressed blocks are deleted, this count doesn't
|
||||
decrease. If you write "0" here, you can initialize
|
||||
compr_written_block and compr_saved_block to "0".
|
||||
|
||||
What: /sys/fs/f2fs/<disk>/compr_saved_block
|
||||
Date: March 2021
|
||||
Contact: "Daeho Jeong" <daehojeong@google.com>
|
||||
Description: Show the saved block count with compression since mount. Note
|
||||
that when the compressed blocks are deleted, this count doesn't
|
||||
decrease. If you write "0" here, you can initialize
|
||||
compr_written_block and compr_saved_block to "0".
|
||||
|
||||
What: /sys/fs/f2fs/<disk>/compr_new_inode
|
||||
Date: March 2021
|
||||
Contact: "Daeho Jeong" <daehojeong@google.com>
|
||||
Description: Show the count of inode newly enabled for compression since mount.
|
||||
Note that when the compression is disabled for the files, this count
|
||||
doesn't decrease. If you write "0" here, you can initialize
|
||||
compr_new_inode to "0".
|
||||
|
||||
25
Documentation/ABI/testing/sysfs-kernel-mm-cma
Normal file
25
Documentation/ABI/testing/sysfs-kernel-mm-cma
Normal file
@ -0,0 +1,25 @@
|
||||
What: /sys/kernel/mm/cma/
|
||||
Date: Feb 2021
|
||||
Contact: Minchan Kim <minchan@kernel.org>
|
||||
Description:
|
||||
/sys/kernel/mm/cma/ contains a subdirectory for each CMA
|
||||
heap name (also sometimes called CMA areas).
|
||||
|
||||
Each CMA heap subdirectory (that is, each
|
||||
/sys/kernel/mm/cma/<cma-heap-name> directory) contains the
|
||||
following items:
|
||||
|
||||
alloc_pages_success
|
||||
alloc_pages_fail
|
||||
|
||||
What: /sys/kernel/mm/cma/<cma-heap-name>/alloc_pages_success
|
||||
Date: Feb 2021
|
||||
Contact: Minchan Kim <minchan@kernel.org>
|
||||
Description:
|
||||
the number of pages CMA API succeeded to allocate
|
||||
|
||||
What: /sys/kernel/mm/cma/<cma-heap-name>/alloc_pages_fail
|
||||
Date: Feb 2021
|
||||
Contact: Minchan Kim <minchan@kernel.org>
|
||||
Description:
|
||||
the number of pages CMA API failed to allocate
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
1 char Memory devices
|
||||
1 = /dev/mem Physical memory access
|
||||
2 = /dev/kmem Kernel virtual memory access
|
||||
2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
|
||||
3 = /dev/null Null device
|
||||
4 = /dev/port I/O port access
|
||||
5 = /dev/zero Null byte source
|
||||
|
||||
@ -17,17 +17,18 @@ module.
|
||||
gpio_mockup_ranges
|
||||
|
||||
This parameter takes an argument in the form of an array of integer
|
||||
pairs. Each pair defines the base GPIO number (if any) and the number
|
||||
of lines exposed by the chip. If the base GPIO is -1, the gpiolib
|
||||
will assign it automatically.
|
||||
pairs. Each pair defines the base GPIO number (non-negative integer)
|
||||
and the first number after the last of this chip. If the base GPIO
|
||||
is -1, the gpiolib will assign it automatically. while the following
|
||||
parameter is the number of lines exposed by the chip.
|
||||
|
||||
Example: gpio_mockup_ranges=-1,8,-1,16,405,4
|
||||
Example: gpio_mockup_ranges=-1,8,-1,16,405,409
|
||||
|
||||
The line above creates three chips. The first one will expose 8 lines,
|
||||
the second 16 and the third 4. The base GPIO for the third chip is set
|
||||
to 405 while for two first chips it will be assigned automatically.
|
||||
|
||||
gpio_named_lines
|
||||
gpio_mockup_named_lines
|
||||
|
||||
This parameter doesn't take any arguments. It lets the driver know that
|
||||
GPIO lines exposed by it should be named.
|
||||
|
||||
@ -1469,6 +1469,12 @@
|
||||
Don't use this when you are not running on the
|
||||
android emulator
|
||||
|
||||
gpio-mockup.gpio_mockup_ranges
|
||||
[HW] Sets the ranges of gpiochip of for this device.
|
||||
Format: <start1>,<end1>,<start2>,<end2>...
|
||||
gpio-mockup.gpio_mockup_named_lines
|
||||
[HW] Let the driver know GPIO lines should be named.
|
||||
|
||||
gpt [EFI] Forces disk with valid GPT signature but
|
||||
invalid Protective MBR to be treated as GPT. If the
|
||||
primary GPT is corrupted, it enables the backup/alternate
|
||||
@ -1492,10 +1498,6 @@
|
||||
Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
|
||||
Default: 1024
|
||||
|
||||
gpio-mockup.gpio_mockup_ranges
|
||||
[HW] Sets the ranges of gpiochip of for this device.
|
||||
Format: <start1>,<end1>,<start2>,<end2>...
|
||||
|
||||
hardlockup_all_cpu_backtrace=
|
||||
[KNL] Should the hard-lockup detector generate
|
||||
backtraces on all cpus.
|
||||
@ -1833,6 +1835,18 @@
|
||||
initcall functions. Useful for debugging built-in
|
||||
modules and initcalls.
|
||||
|
||||
initramfs_async= [KNL]
|
||||
Format: <bool>
|
||||
Default: 1
|
||||
This parameter controls whether the initramfs
|
||||
image is unpacked asynchronously, concurrently
|
||||
with devices being probed and
|
||||
initialized. This should normally just work,
|
||||
but as a debugging aid, one can get the
|
||||
historical behaviour of the initramfs
|
||||
unpacking being completed before device_ and
|
||||
late_ initcalls.
|
||||
|
||||
initrd= [BOOT] Specify the location of the initial ramdisk
|
||||
|
||||
initrdmem= [KNL] Specify a physical address and size from which to
|
||||
@ -2802,7 +2816,24 @@
|
||||
seconds. Use this parameter to check at some
|
||||
other rate. 0 disables periodic checking.
|
||||
|
||||
memtest= [KNL,X86,ARM,PPC] Enable memtest
|
||||
memory_hotplug.memmap_on_memory
|
||||
[KNL,X86,ARM] Boolean flag to enable this feature.
|
||||
Format: {on | off (default)}
|
||||
When enabled, runtime hotplugged memory will
|
||||
allocate its internal metadata (struct pages)
|
||||
from the hotadded memory which will allow to
|
||||
hotadd a lot of memory without requiring
|
||||
additional memory to do so.
|
||||
This feature is disabled by default because it
|
||||
has some implication on large (e.g. GB)
|
||||
allocations in some configurations (e.g. small
|
||||
memory blocks).
|
||||
The state of the flag can be read in
|
||||
/sys/module/memory_hotplug/parameters/memmap_on_memory.
|
||||
Note that even when enabled, there are a few cases where
|
||||
the feature is not effective.
|
||||
|
||||
memtest= [KNL,X86,ARM,PPC,RISCV] Enable memtest
|
||||
Format: <integer>
|
||||
default : 0 <disable>
|
||||
Specifies the number of memtest passes to be
|
||||
|
||||
@ -357,6 +357,15 @@ creates ZONE_MOVABLE as following.
|
||||
Unfortunately, there is no information to show which memory block belongs
|
||||
to ZONE_MOVABLE. This is TBD.
|
||||
|
||||
.. note::
|
||||
Techniques that rely on long-term pinnings of memory (especially, RDMA and
|
||||
vfio) are fundamentally problematic with ZONE_MOVABLE and, therefore, memory
|
||||
hot remove. Pinned pages cannot reside on ZONE_MOVABLE, to guarantee that
|
||||
memory can still get hot removed - be aware that pinning can fail even if
|
||||
there is plenty of free memory in ZONE_MOVABLE. In addition, using
|
||||
ZONE_MOVABLE might make page pinning more expensive, because pages have to be
|
||||
migrated off that zone first.
|
||||
|
||||
.. _memory_hotplug_how_to_offline_memory:
|
||||
|
||||
How to offline memory
|
||||
|
||||
@ -63,36 +63,36 @@ the generic ioctl available.
|
||||
|
||||
The ``uffdio_api.features`` bitmask returned by the ``UFFDIO_API`` ioctl
|
||||
defines what memory types are supported by the ``userfaultfd`` and what
|
||||
events, except page fault notifications, may be generated.
|
||||
events, except page fault notifications, may be generated:
|
||||
|
||||
If the kernel supports registering ``userfaultfd`` ranges on hugetlbfs
|
||||
virtual memory areas, ``UFFD_FEATURE_MISSING_HUGETLBFS`` will be set in
|
||||
``uffdio_api.features``. Similarly, ``UFFD_FEATURE_MISSING_SHMEM`` will be
|
||||
set if the kernel supports registering ``userfaultfd`` ranges on shared
|
||||
memory (covering all shmem APIs, i.e. tmpfs, ``IPCSHM``, ``/dev/zero``,
|
||||
``MAP_SHARED``, ``memfd_create``, etc).
|
||||
- The ``UFFD_FEATURE_EVENT_*`` flags indicate that various other events
|
||||
other than page faults are supported. These events are described in more
|
||||
detail below in the `Non-cooperative userfaultfd`_ section.
|
||||
|
||||
The userland application that wants to use ``userfaultfd`` with hugetlbfs
|
||||
or shared memory need to set the corresponding flag in
|
||||
``uffdio_api.features`` to enable those features.
|
||||
- ``UFFD_FEATURE_MISSING_HUGETLBFS`` and ``UFFD_FEATURE_MISSING_SHMEM``
|
||||
indicate that the kernel supports ``UFFDIO_REGISTER_MODE_MISSING``
|
||||
registrations for hugetlbfs and shared memory (covering all shmem APIs,
|
||||
i.e. tmpfs, ``IPCSHM``, ``/dev/zero``, ``MAP_SHARED``, ``memfd_create``,
|
||||
etc) virtual memory areas, respectively.
|
||||
|
||||
If the userland desires to receive notifications for events other than
|
||||
page faults, it has to verify that ``uffdio_api.features`` has appropriate
|
||||
``UFFD_FEATURE_EVENT_*`` bits set. These events are described in more
|
||||
detail below in `Non-cooperative userfaultfd`_ section.
|
||||
- ``UFFD_FEATURE_MINOR_HUGETLBFS`` indicates that the kernel supports
|
||||
``UFFDIO_REGISTER_MODE_MINOR`` registration for hugetlbfs virtual memory
|
||||
areas.
|
||||
|
||||
Once the ``userfaultfd`` has been enabled the ``UFFDIO_REGISTER`` ioctl should
|
||||
be invoked (if present in the returned ``uffdio_api.ioctls`` bitmask) to
|
||||
register a memory range in the ``userfaultfd`` by setting the
|
||||
The userland application should set the feature flags it intends to use
|
||||
when invoking the ``UFFDIO_API`` ioctl, to request that those features be
|
||||
enabled if supported.
|
||||
|
||||
Once the ``userfaultfd`` API has been enabled the ``UFFDIO_REGISTER``
|
||||
ioctl should be invoked (if present in the returned ``uffdio_api.ioctls``
|
||||
bitmask) to register a memory range in the ``userfaultfd`` by setting the
|
||||
uffdio_register structure accordingly. The ``uffdio_register.mode``
|
||||
bitmask will specify to the kernel which kind of faults to track for
|
||||
the range (``UFFDIO_REGISTER_MODE_MISSING`` would track missing
|
||||
pages). The ``UFFDIO_REGISTER`` ioctl will return the
|
||||
the range. The ``UFFDIO_REGISTER`` ioctl will return the
|
||||
``uffdio_register.ioctls`` bitmask of ioctls that are suitable to resolve
|
||||
userfaults on the range registered. Not all ioctls will necessarily be
|
||||
supported for all memory types depending on the underlying virtual
|
||||
memory backend (anonymous memory vs tmpfs vs real filebacked
|
||||
mappings).
|
||||
supported for all memory types (e.g. anonymous memory vs. shmem vs.
|
||||
hugetlbfs), or all types of intercepted faults.
|
||||
|
||||
Userland can use the ``uffdio_register.ioctls`` to manage the virtual
|
||||
address space in the background (to add or potentially also remove
|
||||
@ -100,21 +100,46 @@ memory from the ``userfaultfd`` registered range). This means a userfault
|
||||
could be triggering just before userland maps in the background the
|
||||
user-faulted page.
|
||||
|
||||
The primary ioctl to resolve userfaults is ``UFFDIO_COPY``. That
|
||||
atomically copies a page into the userfault registered range and wakes
|
||||
up the blocked userfaults
|
||||
(unless ``uffdio_copy.mode & UFFDIO_COPY_MODE_DONTWAKE`` is set).
|
||||
Other ioctl works similarly to ``UFFDIO_COPY``. They're atomic as in
|
||||
guaranteeing that nothing can see an half copied page since it'll
|
||||
keep userfaulting until the copy has finished.
|
||||
Resolving Userfaults
|
||||
--------------------
|
||||
|
||||
There are three basic ways to resolve userfaults:
|
||||
|
||||
- ``UFFDIO_COPY`` atomically copies some existing page contents from
|
||||
userspace.
|
||||
|
||||
- ``UFFDIO_ZEROPAGE`` atomically zeros the new page.
|
||||
|
||||
- ``UFFDIO_CONTINUE`` maps an existing, previously-populated page.
|
||||
|
||||
These operations are atomic in the sense that they guarantee nothing can
|
||||
see a half-populated page, since readers will keep userfaulting until the
|
||||
operation has finished.
|
||||
|
||||
By default, these wake up userfaults blocked on the range in question.
|
||||
They support a ``UFFDIO_*_MODE_DONTWAKE`` ``mode`` flag, which indicates
|
||||
that waking will be done separately at some later time.
|
||||
|
||||
Which ioctl to choose depends on the kind of page fault, and what we'd
|
||||
like to do to resolve it:
|
||||
|
||||
- For ``UFFDIO_REGISTER_MODE_MISSING`` faults, the fault needs to be
|
||||
resolved by either providing a new page (``UFFDIO_COPY``), or mapping
|
||||
the zero page (``UFFDIO_ZEROPAGE``). By default, the kernel would map
|
||||
the zero page for a missing fault. With userfaultfd, userspace can
|
||||
decide what content to provide before the faulting thread continues.
|
||||
|
||||
- For ``UFFDIO_REGISTER_MODE_MINOR`` faults, there is an existing page (in
|
||||
the page cache). Userspace has the option of modifying the page's
|
||||
contents before resolving the fault. Once the contents are correct
|
||||
(modified or not), userspace asks the kernel to map the page and let the
|
||||
faulting thread continue with ``UFFDIO_CONTINUE``.
|
||||
|
||||
Notes:
|
||||
|
||||
- If you requested ``UFFDIO_REGISTER_MODE_MISSING`` when registering then
|
||||
you must provide some kind of page in your thread after reading from
|
||||
the uffd. You must provide either ``UFFDIO_COPY`` or ``UFFDIO_ZEROPAGE``.
|
||||
The normal behavior of the OS automatically providing a zero page on
|
||||
an anonymous mmaping is not in place.
|
||||
- You can tell which kind of fault occurred by examining
|
||||
``pagefault.flags`` within the ``uffd_msg``, checking for the
|
||||
``UFFD_PAGEFAULT_FLAG_*`` flags.
|
||||
|
||||
- None of the page-delivering ioctls default to the range that you
|
||||
registered with. You must fill in all fields for the appropriate
|
||||
@ -122,9 +147,9 @@ Notes:
|
||||
|
||||
- You get the address of the access that triggered the missing page
|
||||
event out of a struct uffd_msg that you read in the thread from the
|
||||
uffd. You can supply as many pages as you want with ``UFFDIO_COPY`` or
|
||||
``UFFDIO_ZEROPAGE``. Keep in mind that unless you used DONTWAKE then
|
||||
the first of any of those IOCTLs wakes up the faulting thread.
|
||||
uffd. You can supply as many pages as you want with these IOCTLs.
|
||||
Keep in mind that unless you used DONTWAKE then the first of any of
|
||||
those IOCTLs wakes up the faulting thread.
|
||||
|
||||
- Be sure to test for all errors including
|
||||
(``pollfd[0].revents & POLLERR``). This can happen, e.g. when ranges
|
||||
|
||||
@ -24,7 +24,8 @@ longterm series? One still supported? Then search the `LKML
|
||||
you don't find any, install `the latest release from that series
|
||||
<https://kernel.org/>`_. If it still shows the issue, report it to the stable
|
||||
mailing list (stable@vger.kernel.org) and CC the regressions list
|
||||
(regressions@lists.linux.dev).
|
||||
(regressions@lists.linux.dev); ideally also CC the maintainer and the mailing
|
||||
list for the subsystem in question.
|
||||
|
||||
In all other cases try your best guess which kernel part might be causing the
|
||||
issue. Check the :ref:`MAINTAINERS <maintainers>` file for how its developers
|
||||
@ -48,8 +49,9 @@ before the issue occurs.
|
||||
If you are facing multiple issues with the Linux kernel at once, report each
|
||||
separately. While writing your report, include all information relevant to the
|
||||
issue, like the kernel and the distro used. In case of a regression, CC the
|
||||
regressions mailing list (regressions@lists.linux.dev) to your report; also try
|
||||
to include the commit-id of the change causing it, which a bisection can find.
|
||||
regressions mailing list (regressions@lists.linux.dev) to your report. Also try
|
||||
to pin-point the culprit with a bisection; if you succeed, include its
|
||||
commit-id and CC everyone in the sign-off-by chain.
|
||||
|
||||
Once the report is out, answer any questions that come up and help where you
|
||||
can. That includes keeping the ball rolling by occasionally retesting with newer
|
||||
@ -198,10 +200,11 @@ report them:
|
||||
|
||||
* Send a short problem report to the Linux stable mailing list
|
||||
(stable@vger.kernel.org) and CC the Linux regressions mailing list
|
||||
(regressions@lists.linux.dev). Roughly describe the issue and ideally
|
||||
explain how to reproduce it. Mention the first version that shows the
|
||||
problem and the last version that's working fine. Then wait for further
|
||||
instructions.
|
||||
(regressions@lists.linux.dev); if you suspect the cause in a particular
|
||||
subsystem, CC its maintainer and its mailing list. Roughly describe the
|
||||
issue and ideally explain how to reproduce it. Mention the first version
|
||||
that shows the problem and the last version that's working fine. Then
|
||||
wait for further instructions.
|
||||
|
||||
The reference section below explains each of these steps in more detail.
|
||||
|
||||
@ -768,7 +771,9 @@ regular internet search engine and add something like
|
||||
the results to the archives at that URL.
|
||||
|
||||
It's also wise to check the internet, LKML and maybe bugzilla.kernel.org again
|
||||
at this point.
|
||||
at this point. If your report needs to be filed in a bug tracker, you may want
|
||||
to check the mailing list archives for the subsystem as well, as someone might
|
||||
have reported it only there.
|
||||
|
||||
For details how to search and what to do if you find matching reports see
|
||||
"Search for existing reports, first run" above.
|
||||
@ -1249,9 +1254,10 @@ and the oldest where the issue occurs (say 5.8-rc1).
|
||||
|
||||
When sending the report by mail, CC the Linux regressions mailing list
|
||||
(regressions@lists.linux.dev). In case the report needs to be filed to some web
|
||||
tracker, proceed to do so; once filed, forward the report by mail to the
|
||||
regressions list. Make sure to inline the forwarded report, hence do not attach
|
||||
it. Also add a short note at the top where you mention the URL to the ticket.
|
||||
tracker, proceed to do so. Once filed, forward the report by mail to the
|
||||
regressions list; CC the maintainer and the mailing list for the subsystem in
|
||||
question. Make sure to inline the forwarded report, hence do not attach it.
|
||||
Also add a short note at the top where you mention the URL to the ticket.
|
||||
|
||||
When mailing or forwarding the report, in case of a successful bisection add the
|
||||
author of the culprit to the recipients; also CC everyone in the signed-off-by
|
||||
@ -1536,17 +1542,20 @@ Report the regression
|
||||
|
||||
*Send a short problem report to the Linux stable mailing list
|
||||
(stable@vger.kernel.org) and CC the Linux regressions mailing list
|
||||
(regressions@lists.linux.dev). Roughly describe the issue and ideally
|
||||
explain how to reproduce it. Mention the first version that shows the
|
||||
problem and the last version that's working fine. Then wait for further
|
||||
instructions.*
|
||||
(regressions@lists.linux.dev); if you suspect the cause in a particular
|
||||
subsystem, CC its maintainer and its mailing list. Roughly describe the
|
||||
issue and ideally explain how to reproduce it. Mention the first version
|
||||
that shows the problem and the last version that's working fine. Then
|
||||
wait for further instructions.*
|
||||
|
||||
When reporting a regression that happens within a stable or longterm kernel
|
||||
line (say when updating from 5.10.4 to 5.10.5) a brief report is enough for
|
||||
the start to get the issue reported quickly. Hence a rough description is all
|
||||
it takes.
|
||||
the start to get the issue reported quickly. Hence a rough description to the
|
||||
stable and regressions mailing list is all it takes; but in case you suspect
|
||||
the cause in a particular subsystem, CC its maintainers and its mailing list
|
||||
as well, because that will speed things up.
|
||||
|
||||
But note, it helps developers a great deal if you can specify the exact version
|
||||
And note, it helps developers a great deal if you can specify the exact version
|
||||
that introduced the problem. Hence if possible within a reasonable time frame,
|
||||
try to find that version using vanilla kernels. Lets assume something broke when
|
||||
your distributor released a update from Linux kernel 5.10.5 to 5.10.8. Then as
|
||||
@ -1563,7 +1572,9 @@ pinpoint the exact change that causes the issue (which then can easily get
|
||||
reverted to fix the issue quickly). Hence consider to do a proper bisection
|
||||
right away if time permits. See the section 'Special care for regressions' and
|
||||
the document 'Documentation/admin-guide/bug-bisect.rst' for details how to
|
||||
perform one.
|
||||
perform one. In case of a successful bisection add the author of the culprit to
|
||||
the recipients; also CC everyone in the signed-off-by chain, which you find at
|
||||
the end of its commit message.
|
||||
|
||||
|
||||
Reference for "Reporting issues only occurring in older kernel version lines"
|
||||
|
||||
@ -277,9 +277,40 @@ Before jumping into the kernel, the following conditions must be met:
|
||||
|
||||
- SCR_EL3.FGTEn (bit 27) must be initialised to 0b1.
|
||||
|
||||
For CPUs with Advanced SIMD and floating point support:
|
||||
|
||||
- If EL3 is present:
|
||||
|
||||
- CPTR_EL3.TFP (bit 10) must be initialised to 0b0.
|
||||
|
||||
- If EL2 is present and the kernel is entered at EL1:
|
||||
|
||||
- CPTR_EL2.TFP (bit 10) must be initialised to 0b0.
|
||||
|
||||
For CPUs with the Scalable Vector Extension (FEAT_SVE) present:
|
||||
|
||||
- if EL3 is present:
|
||||
|
||||
- CPTR_EL3.EZ (bit 8) must be initialised to 0b1.
|
||||
|
||||
- ZCR_EL3.LEN must be initialised to the same value for all CPUs the
|
||||
kernel is executed on.
|
||||
|
||||
- If the kernel is entered at EL1 and EL2 is present:
|
||||
|
||||
- CPTR_EL2.TZ (bit 8) must be initialised to 0b0.
|
||||
|
||||
- CPTR_EL2.ZEN (bits 17:16) must be initialised to 0b11.
|
||||
|
||||
- ZCR_EL2.LEN must be initialised to the same value for all CPUs the
|
||||
kernel will execute on.
|
||||
|
||||
The requirements described above for CPU mode, caches, MMUs, architected
|
||||
timers, coherency and system registers apply to all CPUs. All CPUs must
|
||||
enter the kernel in the same exception level.
|
||||
enter the kernel in the same exception level. Where the values documented
|
||||
disable traps it is permissible for these traps to be enabled so long as
|
||||
those traps are handled transparently by higher exception levels as though
|
||||
the values documented were set.
|
||||
|
||||
The boot loader is expected to enter the kernel on each CPU in the
|
||||
following manner:
|
||||
|
||||
@ -74,7 +74,7 @@ HWCAP_ASIMD
|
||||
|
||||
HWCAP_EVTSTRM
|
||||
The generic timer is configured to generate events at a frequency of
|
||||
approximately 100KHz.
|
||||
approximately 10KHz.
|
||||
|
||||
HWCAP_AES
|
||||
Functionality implied by ID_AA64ISAR0_EL1.AES == 0b0001.
|
||||
|
||||
@ -113,6 +113,12 @@ ABI relaxation:
|
||||
|
||||
- ``shmat()`` and ``shmdt()``.
|
||||
|
||||
- ``brk()`` (since kernel v5.6).
|
||||
|
||||
- ``mmap()`` (since kernel v5.6).
|
||||
|
||||
- ``mremap()``, the ``new_address`` argument (since kernel v5.6).
|
||||
|
||||
Any attempt to use non-zero tagged pointers may result in an error code
|
||||
being returned, a (fatal) signal being raised, or other modes of
|
||||
failure.
|
||||
|
||||
@ -563,6 +563,16 @@ Free a region of memory previously allocated using dma_alloc_pages().
|
||||
dev, size, dma_handle and dir must all be the same as those passed into
|
||||
dma_alloc_pages(). page must be the pointer returned by dma_alloc_pages().
|
||||
|
||||
::
|
||||
|
||||
int
|
||||
dma_mmap_pages(struct device *dev, struct vm_area_struct *vma,
|
||||
size_t size, struct page *page)
|
||||
|
||||
Map an allocation returned from dma_alloc_pages() into a user address space.
|
||||
dev and size must be the same as those passed into dma_alloc_pages().
|
||||
page must be the pointer returned by dma_alloc_pages().
|
||||
|
||||
::
|
||||
|
||||
void *
|
||||
@ -584,6 +594,84 @@ dev, size, dma_handle and dir must all be the same as those passed into
|
||||
dma_alloc_noncoherent(). cpu_addr must be the virtual address returned by
|
||||
dma_alloc_noncoherent().
|
||||
|
||||
::
|
||||
|
||||
struct sg_table *
|
||||
dma_alloc_noncontiguous(struct device *dev, size_t size,
|
||||
enum dma_data_direction dir, gfp_t gfp,
|
||||
unsigned long attrs);
|
||||
|
||||
This routine allocates <size> bytes of non-coherent and possibly non-contiguous
|
||||
memory. It returns a pointer to struct sg_table that describes the allocated
|
||||
and DMA mapped memory, or NULL if the allocation failed. The resulting memory
|
||||
can be used for struct page mapped into a scatterlist are suitable for.
|
||||
|
||||
The return sg_table is guaranteed to have 1 single DMA mapped segment as
|
||||
indicated by sgt->nents, but it might have multiple CPU side segments as
|
||||
indicated by sgt->orig_nents.
|
||||
|
||||
The dir parameter specified if data is read and/or written by the device,
|
||||
see dma_map_single() for details.
|
||||
|
||||
The gfp parameter allows the caller to specify the ``GFP_`` flags (see
|
||||
kmalloc()) for the allocation, but rejects flags used to specify a memory
|
||||
zone such as GFP_DMA or GFP_HIGHMEM.
|
||||
|
||||
The attrs argument must be either 0 or DMA_ATTR_ALLOC_SINGLE_PAGES.
|
||||
|
||||
Before giving the memory to the device, dma_sync_sgtable_for_device() needs
|
||||
to be called, and before reading memory written by the device,
|
||||
dma_sync_sgtable_for_cpu(), just like for streaming DMA mappings that are
|
||||
reused.
|
||||
|
||||
::
|
||||
|
||||
void
|
||||
dma_free_noncontiguous(struct device *dev, size_t size,
|
||||
struct sg_table *sgt,
|
||||
enum dma_data_direction dir)
|
||||
|
||||
Free memory previously allocated using dma_alloc_noncontiguous(). dev, size,
|
||||
and dir must all be the same as those passed into dma_alloc_noncontiguous().
|
||||
sgt must be the pointer returned by dma_alloc_noncontiguous().
|
||||
|
||||
::
|
||||
|
||||
void *
|
||||
dma_vmap_noncontiguous(struct device *dev, size_t size,
|
||||
struct sg_table *sgt)
|
||||
|
||||
Return a contiguous kernel mapping for an allocation returned from
|
||||
dma_alloc_noncontiguous(). dev and size must be the same as those passed into
|
||||
dma_alloc_noncontiguous(). sgt must be the pointer returned by
|
||||
dma_alloc_noncontiguous().
|
||||
|
||||
Once a non-contiguous allocation is mapped using this function, the
|
||||
flush_kernel_vmap_range() and invalidate_kernel_vmap_range() APIs must be used
|
||||
to manage the coherency between the kernel mapping, the device and user space
|
||||
mappings (if any).
|
||||
|
||||
::
|
||||
|
||||
void
|
||||
dma_vunmap_noncontiguous(struct device *dev, void *vaddr)
|
||||
|
||||
Unmap a kernel mapping returned by dma_vmap_noncontiguous(). dev must be the
|
||||
same the one passed into dma_alloc_noncontiguous(). vaddr must be the pointer
|
||||
returned by dma_vmap_noncontiguous().
|
||||
|
||||
|
||||
::
|
||||
|
||||
int
|
||||
dma_mmap_noncontiguous(struct device *dev, struct vm_area_struct *vma,
|
||||
size_t size, struct sg_table *sgt)
|
||||
|
||||
Map an allocation returned from dma_alloc_noncontiguous() into a user address
|
||||
space. dev and size must be the same as those passed into
|
||||
dma_alloc_noncontiguous(). sgt must be the pointer returned by
|
||||
dma_alloc_noncontiguous().
|
||||
|
||||
::
|
||||
|
||||
int
|
||||
|
||||
@ -42,10 +42,10 @@ irq_domain usage
|
||||
================
|
||||
|
||||
An interrupt controller driver creates and registers an irq_domain by
|
||||
calling one of the irq_domain_add_*() functions (each mapping method
|
||||
has a different allocator function, more on that later). The function
|
||||
will return a pointer to the irq_domain on success. The caller must
|
||||
provide the allocator function with an irq_domain_ops structure.
|
||||
calling one of the irq_domain_add_*() or irq_domain_create_*() functions
|
||||
(each mapping method has a different allocator function, more on that later).
|
||||
The function will return a pointer to the irq_domain on success. The caller
|
||||
must provide the allocator function with an irq_domain_ops structure.
|
||||
|
||||
In most cases, the irq_domain will begin empty without any mappings
|
||||
between hwirq and IRQ numbers. Mappings are added to the irq_domain
|
||||
@ -147,6 +147,7 @@ Legacy
|
||||
irq_domain_add_simple()
|
||||
irq_domain_add_legacy()
|
||||
irq_domain_add_legacy_isa()
|
||||
irq_domain_create_simple()
|
||||
irq_domain_create_legacy()
|
||||
|
||||
The Legacy mapping is a special case for drivers that already have a
|
||||
@ -169,13 +170,13 @@ supported. For example, ISA controllers would use the legacy map for
|
||||
mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
|
||||
numbers.
|
||||
|
||||
Most users of legacy mappings should use irq_domain_add_simple() which
|
||||
will use a legacy domain only if an IRQ range is supplied by the
|
||||
system and will otherwise use a linear domain mapping. The semantics
|
||||
of this call are such that if an IRQ range is specified then
|
||||
Most users of legacy mappings should use irq_domain_add_simple() or
|
||||
irq_domain_create_simple() which will use a legacy domain only if an IRQ range
|
||||
is supplied by the system and will otherwise use a linear domain mapping.
|
||||
The semantics of this call are such that if an IRQ range is specified then
|
||||
descriptors will be allocated on-the-fly for it, and if no range is
|
||||
specified it will fall through to irq_domain_add_linear() which means
|
||||
*no* irq descriptors will be allocated.
|
||||
specified it will fall through to irq_domain_add_linear() or
|
||||
irq_domain_create_linear() which means *no* irq descriptors will be allocated.
|
||||
|
||||
A typical use case for simple domains is where an irqchip provider
|
||||
is supporting both dynamic and static IRQ assignments.
|
||||
@ -186,6 +187,7 @@ that the driver using the simple domain call irq_create_mapping()
|
||||
before any irq_find_mapping() since the latter will actually work
|
||||
for the static IRQ assignment case.
|
||||
|
||||
irq_domain_add_simple() and irq_domain_create_simple() as well as
|
||||
irq_domain_add_legacy() and irq_domain_create_legacy() are functionally
|
||||
equivalent, except for the first argument is different - the former
|
||||
accepts an Open Firmware specific 'struct device_node', while the latter
|
||||
|
||||
@ -43,14 +43,14 @@ exporting of kernel symbols to the kernel symbol table, variants of these are
|
||||
available to export symbols into a certain namespace: EXPORT_SYMBOL_NS() and
|
||||
EXPORT_SYMBOL_NS_GPL(). They take one additional argument: the namespace.
|
||||
Please note that due to macro expansion that argument needs to be a
|
||||
preprocessor symbol. E.g. to export the symbol `usb_stor_suspend` into the
|
||||
namespace `USB_STORAGE`, use::
|
||||
preprocessor symbol. E.g. to export the symbol ``usb_stor_suspend`` into the
|
||||
namespace ``USB_STORAGE``, use::
|
||||
|
||||
EXPORT_SYMBOL_NS(usb_stor_suspend, USB_STORAGE);
|
||||
|
||||
The corresponding ksymtab entry struct `kernel_symbol` will have the member
|
||||
`namespace` set accordingly. A symbol that is exported without a namespace will
|
||||
refer to `NULL`. There is no default namespace if none is defined. `modpost`
|
||||
The corresponding ksymtab entry struct ``kernel_symbol`` will have the member
|
||||
``namespace`` set accordingly. A symbol that is exported without a namespace will
|
||||
refer to ``NULL``. There is no default namespace if none is defined. ``modpost``
|
||||
and kernel/module.c make use the namespace at build time or module load time,
|
||||
respectively.
|
||||
|
||||
@ -64,7 +64,7 @@ and EXPORT_SYMBOL_GPL() macro expansions that do not specify a namespace.
|
||||
|
||||
There are multiple ways of specifying this define and it depends on the
|
||||
subsystem and the maintainer's preference, which one to use. The first option
|
||||
is to define the default namespace in the `Makefile` of the subsystem. E.g. to
|
||||
is to define the default namespace in the ``Makefile`` of the subsystem. E.g. to
|
||||
export all symbols defined in usb-common into the namespace USB_COMMON, add a
|
||||
line like this to drivers/usb/common/Makefile::
|
||||
|
||||
@ -96,7 +96,7 @@ using a statement like::
|
||||
|
||||
MODULE_IMPORT_NS(USB_STORAGE);
|
||||
|
||||
This will create a `modinfo` tag in the module for each imported namespace.
|
||||
This will create a ``modinfo`` tag in the module for each imported namespace.
|
||||
This has the side effect, that the imported namespaces of a module can be
|
||||
inspected with modinfo::
|
||||
|
||||
@ -113,7 +113,7 @@ metadata definitions like MODULE_AUTHOR() or MODULE_LICENSE(). Refer to section
|
||||
4. Loading Modules that use namespaced Symbols
|
||||
==============================================
|
||||
|
||||
At module loading time (e.g. `insmod`), the kernel will check each symbol
|
||||
At module loading time (e.g. ``insmod``), the kernel will check each symbol
|
||||
referenced from the module for its availability and whether the namespace it
|
||||
might be exported to has been imported by the module. The default behaviour of
|
||||
the kernel is to reject loading modules that don't specify sufficient imports.
|
||||
@ -138,19 +138,19 @@ missing imports. Fixing missing imports can be done with::
|
||||
A typical scenario for module authors would be::
|
||||
|
||||
- write code that depends on a symbol from a not imported namespace
|
||||
- `make`
|
||||
- ``make``
|
||||
- notice the warning of modpost telling about a missing import
|
||||
- run `make nsdeps` to add the import to the correct code location
|
||||
- run ``make nsdeps`` to add the import to the correct code location
|
||||
|
||||
For subsystem maintainers introducing a namespace, the steps are very similar.
|
||||
Again, `make nsdeps` will eventually add the missing namespace imports for
|
||||
Again, ``make nsdeps`` will eventually add the missing namespace imports for
|
||||
in-tree modules::
|
||||
|
||||
- move or add symbols to a namespace (e.g. with EXPORT_SYMBOL_NS())
|
||||
- `make` (preferably with an allmodconfig to cover all in-kernel
|
||||
- ``make`` (preferably with an allmodconfig to cover all in-kernel
|
||||
modules)
|
||||
- notice the warning of modpost telling about a missing import
|
||||
- run `make nsdeps` to add the import to the correct code location
|
||||
- run ``make nsdeps`` to add the import to the correct code location
|
||||
|
||||
You can also run nsdeps for external module builds. A typical usage is::
|
||||
|
||||
|
||||
@ -114,7 +114,7 @@ Examples of using the Linux-provided gdb helpers
|
||||
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
|
||||
....
|
||||
|
||||
- Examine fields of the current task struct::
|
||||
- Examine fields of the current task struct(supported by x86 and arm64 only)::
|
||||
|
||||
(gdb) p $lx_current().pid
|
||||
$1 = 4998
|
||||
|
||||
@ -109,7 +109,7 @@ required:
|
||||
- resets
|
||||
- ddc
|
||||
|
||||
unevaluatedProperties: false
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@ -51,6 +51,9 @@ properties:
|
||||
resets: true
|
||||
reset-names: true
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
ports:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
description: |
|
||||
|
||||
@ -20,6 +20,7 @@ properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sdm845-gpi-dma
|
||||
- qcom,sm8150-gpi-dma
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
@ -0,0 +1,77 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Generic 8-bit shift register
|
||||
|
||||
maintainers:
|
||||
- Maxime Ripard <mripard@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fairchild,74hc595
|
||||
- nxp,74lvc594
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
'#gpio-cells':
|
||||
description:
|
||||
The second cell is only used to specify the GPIO polarity.
|
||||
const: 2
|
||||
|
||||
registers-number:
|
||||
description: Number of daisy-chained shift registers
|
||||
|
||||
enable-gpios:
|
||||
description: GPIO connected to the OE (Output Enable) pin.
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
|
||||
patternProperties:
|
||||
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
|
||||
type: object
|
||||
|
||||
properties:
|
||||
gpio-hog: true
|
||||
gpios: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
line-name: true
|
||||
|
||||
required:
|
||||
- gpio-hog
|
||||
- gpios
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- gpio-controller
|
||||
- '#gpio-cells'
|
||||
- registers-number
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio5: gpio5@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <4>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
@ -1,27 +0,0 @@
|
||||
* Generic 8-bits shift register GPIO driver
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain one of the following:
|
||||
"fairchild,74hc595"
|
||||
"nxp,74lvc594"
|
||||
- reg : chip select number
|
||||
- gpio-controller : Marks the device node as a gpio controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and
|
||||
the second cell is used to specify the gpio polarity:
|
||||
0 = active high
|
||||
1 = active low
|
||||
- registers-number: Number of daisy-chained shift registers
|
||||
|
||||
Optional properties:
|
||||
- enable-gpios: GPIO connected to the OE (Output Enable) pin.
|
||||
|
||||
Example:
|
||||
|
||||
gpio5: gpio5@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <4>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
@ -0,0 +1,78 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Realtek Otto GPIO controller
|
||||
|
||||
maintainers:
|
||||
- Sander Vanheule <sander@svanheule.net>
|
||||
- Bert Vermeulen <bert@biot.com>
|
||||
|
||||
description: |
|
||||
Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
|
||||
of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
|
||||
Each bank's interrupts are cascased into one interrupt line on the parent
|
||||
interrupt controller, if provided.
|
||||
This binding allows defining a single bank in the devicetree. The interrupt
|
||||
controller is not supported on the fallback compatible name, which only
|
||||
allows for GPIO port use.
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^gpio@[0-9a-f]+$"
|
||||
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- realtek,rtl8380-gpio
|
||||
- realtek,rtl8390-gpio
|
||||
- const: realtek,otto-gpio
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#gpio-cells":
|
||||
const: 2
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
ngpios:
|
||||
minimum: 1
|
||||
maximum: 32
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 2
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#gpio-cells"
|
||||
- gpio-controller
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
dependencies:
|
||||
interrupt-controller: [ interrupts ]
|
||||
|
||||
examples:
|
||||
- |
|
||||
gpio@3500 {
|
||||
compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
|
||||
reg = <0x3500 0x1c>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
ngpios = <24>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&rtlintc>;
|
||||
interrupts = <23>;
|
||||
};
|
||||
|
||||
...
|
||||
@ -0,0 +1,82 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Rockchip GPIO bank
|
||||
|
||||
maintainers:
|
||||
- Heiko Stuebner <heiko@sntech.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- rockchip,gpio-bank
|
||||
- rockchip,rk3188-gpio-bank0
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
const: 2
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 2
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- interrupt-controller
|
||||
- "#interrupt-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
pinctrl: pinctrl {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpio0: gpio@2000a000 {
|
||||
compatible = "rockchip,rk3188-gpio-bank0";
|
||||
reg = <0x2000a000 0x100>;
|
||||
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_gates8 9>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio@2003c000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x2003c000 0x100>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_gates8 10>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
@ -1,28 +0,0 @@
|
||||
SIRF Hardware spinlock device Binding
|
||||
-----------------------------------------------
|
||||
|
||||
Required properties :
|
||||
- compatible : shall contain only one of the following:
|
||||
"sirf,hwspinlock"
|
||||
|
||||
- reg : the register address of hwspinlock
|
||||
|
||||
- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
|
||||
hwlock, so the number of cells should be <1> here.
|
||||
|
||||
Please look at the generic hwlock binding for usage information for consumers,
|
||||
"Documentation/devicetree/bindings/hwlock/hwlock.txt"
|
||||
|
||||
Example of hwlock provider:
|
||||
hwlock {
|
||||
compatible = "sirf,hwspinlock";
|
||||
reg = <0x13240000 0x00010000>;
|
||||
#hwlock-cells = <1>;
|
||||
};
|
||||
|
||||
Example of hwlock users:
|
||||
node {
|
||||
...
|
||||
hwlocks = <&hwlock 2>;
|
||||
...
|
||||
};
|
||||
@ -49,7 +49,7 @@ additionalProperties: true
|
||||
examples:
|
||||
- |
|
||||
i3c-master@a0000000 {
|
||||
compatible = "silvaco,i3c-master";
|
||||
compatible = "silvaco,i3c-master-v1";
|
||||
clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
|
||||
clock-names = "pclk", "fast_clk", "slow_clk";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
@ -39,6 +39,13 @@ properties:
|
||||
(active low). The line must be flagged with
|
||||
GPIO_ACTIVE_LOW.
|
||||
|
||||
wake-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
Optional GPIO specifier for the touchscreen's wake pin
|
||||
(active low). The line must be flagged with
|
||||
GPIO_ACTIVE_LOW.
|
||||
|
||||
linux,gpio-keymap:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
description: |
|
||||
@ -53,6 +60,29 @@ properties:
|
||||
or experiment to determine which bit corresponds to which input. Use
|
||||
KEY_RESERVED for unused padding values.
|
||||
|
||||
atmel,wakeup-method:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
The WAKE line is an active-low input that is used to wake up the touch
|
||||
controller from deep-sleep mode before communication with the controller
|
||||
could be started. This optional feature used to minimize current
|
||||
consumption when the controller is in deep sleep mode. This feature is
|
||||
relevant only to some controller families, like mXT1386 controller for
|
||||
example.
|
||||
|
||||
The WAKE pin can be connected in one of the following ways:
|
||||
1) left permanently low
|
||||
2) connected to the I2C-compatible SCL pin
|
||||
3) connected to a GPIO pin on the host
|
||||
enum:
|
||||
- 0 # ATMEL_MXT_WAKEUP_NONE
|
||||
- 1 # ATMEL_MXT_WAKEUP_I2C_SCL
|
||||
- 2 # ATMEL_MXT_WAKEUP_GPIO
|
||||
default: 0
|
||||
|
||||
wakeup-source:
|
||||
type: boolean
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
@ -63,6 +93,7 @@ additionalProperties: false
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/input/atmel-maxtouch.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
@ -75,6 +106,7 @@ examples:
|
||||
reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||
vdda-supply = <&ab8500_ldo_aux2_reg>;
|
||||
vdd-supply = <&ab8500_ldo_aux5_reg>;
|
||||
atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
843
Documentation/devicetree/bindings/input/iqs626a.yaml
Normal file
843
Documentation/devicetree/bindings/input/iqs626a.yaml
Normal file
@ -0,0 +1,843 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/iqs626a.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Azoteq IQS626A Capacitive Touch Controller
|
||||
|
||||
maintainers:
|
||||
- Jeff LaBundy <jeff@labundy.com>
|
||||
|
||||
description: |
|
||||
The Azoteq IQS626A is a 14-channel capacitive touch controller that features
|
||||
additional Hall-effect and inductive sensing capabilities.
|
||||
|
||||
Link to datasheet: https://www.azoteq.com/
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen/touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: azoteq,iqs626a
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
azoteq,suspend-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the power mode during suspend as follows:
|
||||
0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
|
||||
1: Low power (all sensing at a reduced reporting rate)
|
||||
2: Ultra-low power (ULP channel proximity sensing)
|
||||
3: Halt (no sensing)
|
||||
|
||||
azoteq,clk-div:
|
||||
type: boolean
|
||||
description: Divides the device's core clock by a factor of 4.
|
||||
|
||||
azoteq,ulp-enable:
|
||||
type: boolean
|
||||
description:
|
||||
Permits the device to automatically enter ultra-low-power mode from low-
|
||||
power mode.
|
||||
|
||||
azoteq,ulp-update:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||
default: 3
|
||||
description: |
|
||||
Specifies the rate at which the trackpad, generic and Hall channels are
|
||||
updated during ultra-low-power mode as follows:
|
||||
0: 8
|
||||
1: 13
|
||||
2: 28
|
||||
3: 54
|
||||
4: 89
|
||||
5: 135
|
||||
6: 190
|
||||
7: 256
|
||||
|
||||
azoteq,ati-band-disable:
|
||||
type: boolean
|
||||
description: Disables the ATI band check.
|
||||
|
||||
azoteq,ati-lp-only:
|
||||
type: boolean
|
||||
description: Limits automatic ATI to low-power mode.
|
||||
|
||||
azoteq,gpio3-select:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||
default: 1
|
||||
description: |
|
||||
Selects the channel or group of channels for which the GPIO3 pin
|
||||
represents touch state as follows:
|
||||
0: None
|
||||
1: ULP channel
|
||||
2: Trackpad
|
||||
3: Trackpad
|
||||
4: Generic channel 0
|
||||
5: Generic channel 1
|
||||
6: Generic channel 2
|
||||
7: Hall channel
|
||||
|
||||
azoteq,reseed-select:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the event(s) that prompt the device to reseed (i.e. reset the
|
||||
long-term average) of an associated channel as follows:
|
||||
0: None
|
||||
1: Proximity
|
||||
2: Proximity or touch
|
||||
3: Proximity, touch or deep touch
|
||||
|
||||
azoteq,thresh-extend:
|
||||
type: boolean
|
||||
description: Multiplies all touch and deep-touch thresholds by 4.
|
||||
|
||||
azoteq,tracking-enable:
|
||||
type: boolean
|
||||
description:
|
||||
Enables all associated channels to track their respective reference
|
||||
channels.
|
||||
|
||||
azoteq,reseed-offset:
|
||||
type: boolean
|
||||
description:
|
||||
Applies an 8-count offset to all long-term averages upon either ATI or
|
||||
reseed events.
|
||||
|
||||
azoteq,rate-np-ms:
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
default: 150
|
||||
description: Specifies the report rate (in ms) during normal-power mode.
|
||||
|
||||
azoteq,rate-lp-ms:
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
default: 150
|
||||
description: Specifies the report rate (in ms) during low-power mode.
|
||||
|
||||
azoteq,rate-ulp-ms:
|
||||
multipleOf: 16
|
||||
minimum: 0
|
||||
maximum: 4080
|
||||
default: 0
|
||||
description: Specifies the report rate (in ms) during ultra-low-power mode.
|
||||
|
||||
azoteq,timeout-pwr-ms:
|
||||
multipleOf: 512
|
||||
minimum: 0
|
||||
maximum: 130560
|
||||
default: 2560
|
||||
description:
|
||||
Specifies the length of time (in ms) to wait for an event before moving
|
||||
from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
|
||||
present) from low-power mode to ultra-low-power mode.
|
||||
|
||||
azoteq,timeout-lta-ms:
|
||||
multipleOf: 512
|
||||
minimum: 0
|
||||
maximum: 130560
|
||||
default: 40960
|
||||
description:
|
||||
Specifies the length of time (in ms) to wait before resetting the long-
|
||||
term average of all channels. Specify the maximum timeout to disable it
|
||||
altogether.
|
||||
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
|
||||
patternProperties:
|
||||
"^ulp-0|generic-[0-2]|hall$":
|
||||
type: object
|
||||
description:
|
||||
Represents a single sensing channel. A channel is active if defined and
|
||||
inactive otherwise.
|
||||
|
||||
properties:
|
||||
azoteq,ati-exclude:
|
||||
type: boolean
|
||||
description:
|
||||
Prevents the channel from participating in an ATI event that is
|
||||
manually triggered during initialization.
|
||||
|
||||
azoteq,reseed-disable:
|
||||
type: boolean
|
||||
description:
|
||||
Prevents the channel from being reseeded if the long-term average
|
||||
timeout (defined in 'azoteq,timeout-lta') expires.
|
||||
|
||||
azoteq,meas-cap-decrease:
|
||||
type: boolean
|
||||
description:
|
||||
Decreases the internal measurement capacitance from 60 pF to 15 pF.
|
||||
|
||||
azoteq,rx-inactive:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies how inactive CRX pins are to be terminated as follows:
|
||||
0: VSS
|
||||
1: Floating
|
||||
2: VREG (generic channels only)
|
||||
|
||||
azoteq,linearize:
|
||||
type: boolean
|
||||
description:
|
||||
Enables linearization of the channel's counts (generic and Hall
|
||||
channels) or inverts the polarity of the channel's proximity or
|
||||
touch states (ULP channel).
|
||||
|
||||
azoteq,dual-direction:
|
||||
type: boolean
|
||||
description:
|
||||
Specifies that the channel's long-term average is to freeze in the
|
||||
presence of either increasing or decreasing counts, thereby permit-
|
||||
ting events to be reported in either direction.
|
||||
|
||||
azoteq,filt-disable:
|
||||
type: boolean
|
||||
description: Disables raw count filtering for the channel.
|
||||
|
||||
azoteq,ati-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
Specifies the channel's ATI mode as follows:
|
||||
0: Disabled
|
||||
1: Semi-partial
|
||||
2: Partial
|
||||
3: Full
|
||||
|
||||
The default value is a function of the channel and the device's reset
|
||||
user interface (RUI); reference the datasheet for further information
|
||||
about the available RUI options.
|
||||
|
||||
azoteq,ati-base:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [75, 100, 150, 200]
|
||||
description:
|
||||
Specifies the channel's ATI base. The default value is a function
|
||||
of the channel and the device's RUI.
|
||||
|
||||
azoteq,ati-target:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
multipleOf: 32
|
||||
minimum: 0
|
||||
maximum: 2016
|
||||
description:
|
||||
Specifies the channel's ATI target. The default value is a function
|
||||
of the channel and the device's RUI.
|
||||
|
||||
azoteq,cct-increase:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 16
|
||||
default: 0
|
||||
description:
|
||||
Specifies the degree to which the channel's charge cycle time is to
|
||||
be increased, with 0 representing no increase. The maximum value is
|
||||
limited to 4 in the case of the ULP channel, and the property is un-
|
||||
available entirely in the case of the Hall channel.
|
||||
|
||||
azoteq,proj-bias:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the bias current applied during projected-capacitance
|
||||
sensing as follows:
|
||||
0: 2.5 uA
|
||||
1: 5 uA
|
||||
2: 10 uA
|
||||
3: 20 uA
|
||||
|
||||
This property is unavailable in the case of the Hall channel.
|
||||
|
||||
azoteq,sense-freq:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
description: |
|
||||
Specifies the channel's sensing frequency as follows (parenthesized
|
||||
numbers represent the frequency if 'azoteq,clk-div' is present):
|
||||
0: 4 MHz (1 MHz)
|
||||
1: 2 MHz (500 kHz)
|
||||
2: 1 MHz (250 kHz)
|
||||
3: 500 kHz (125 kHz)
|
||||
|
||||
This property is unavailable in the case of the Hall channel. The
|
||||
default value is a function of the channel and the device's RUI.
|
||||
|
||||
azoteq,ati-band-tighten:
|
||||
type: boolean
|
||||
description:
|
||||
Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
|
||||
generic channels only).
|
||||
|
||||
azoteq,proj-enable:
|
||||
type: boolean
|
||||
description: Enables projected-capacitance sensing (ULP channel only).
|
||||
|
||||
azoteq,filt-str-np-cnt:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the raw count filter strength during normal-power mode (ULP
|
||||
and generic channels only).
|
||||
|
||||
azoteq,filt-str-lp-cnt:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the raw count filter strength during low-power mode (ULP and
|
||||
generic channels only).
|
||||
|
||||
azoteq,filt-str-np-lta:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the long-term average filter strength during normal-power
|
||||
mode (ULP and generic channels only).
|
||||
|
||||
azoteq,filt-str-lp-lta:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the long-term average filter strength during low-power mode
|
||||
(ULP and generic channels only).
|
||||
|
||||
azoteq,rx-enable:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 1
|
||||
maxItems: 8
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 7
|
||||
description:
|
||||
Specifies the CRX pin(s) associated with the channel.
|
||||
|
||||
This property is unavailable in the case of the Hall channel. The
|
||||
default value is a function of the channel and the device's RUI.
|
||||
|
||||
azoteq,tx-enable:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 1
|
||||
maxItems: 8
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 7
|
||||
description:
|
||||
Specifies the TX pin(s) associated with the channel.
|
||||
|
||||
This property is unavailable in the case of the Hall channel. The
|
||||
default value is a function of the channel and the device's RUI.
|
||||
|
||||
azoteq,local-cap-size:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the capacitance to be added to the channel as follows:
|
||||
0: 0 pF
|
||||
1: 0.5 pF
|
||||
2: 1.0 pF
|
||||
3: 1.5 pF
|
||||
4: 2.0 pF
|
||||
|
||||
This property is unavailable in the case of the ULP or Hall channels.
|
||||
|
||||
azoteq,sense-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 8, 9, 12, 14, 15]
|
||||
description: |
|
||||
Specifies the channel's sensing mode as follows:
|
||||
0: Self capacitance
|
||||
1: Projected capacitance
|
||||
8: Self inductance
|
||||
9: Mutual inductance
|
||||
12: External
|
||||
14: Hall effect
|
||||
15: Temperature
|
||||
|
||||
This property is unavailable in the case of the ULP or Hall channels.
|
||||
The default value is a function of the channel and the device's RUI.
|
||||
|
||||
azoteq,tx-freq:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the inductive sensing excitation frequency as follows
|
||||
(parenthesized numbers represent the frequency if 'azoteq,clk-div'
|
||||
is present):
|
||||
0: 16 MHz (4 MHz)
|
||||
1: 8 MHz (2 MHz)
|
||||
2: 4 MHz (1 MHz)
|
||||
3: 2 MHz (500 kHz)
|
||||
|
||||
This property is unavailable in the case of the ULP or Hall channels.
|
||||
|
||||
azoteq,invert-enable:
|
||||
type: boolean
|
||||
description:
|
||||
Inverts the polarity of the states reported for proximity, touch and
|
||||
deep-touch events relative to their respective thresholds (generic
|
||||
channels only).
|
||||
|
||||
azoteq,comp-disable:
|
||||
type: boolean
|
||||
description:
|
||||
Disables compensation for the channel (generic channels only).
|
||||
|
||||
azoteq,static-enable:
|
||||
type: boolean
|
||||
description:
|
||||
Enables the static front-end for the channel (generic channels only).
|
||||
|
||||
azoteq,assoc-select:
|
||||
$ref: /schemas/types.yaml#/definitions/string-array
|
||||
minItems: 1
|
||||
maxItems: 6
|
||||
items:
|
||||
enum:
|
||||
- ulp-0
|
||||
- trackpad-3x2
|
||||
- trackpad-3x3
|
||||
- generic-0
|
||||
- generic-1
|
||||
- generic-2
|
||||
- hall
|
||||
description:
|
||||
Specifies the associated channels for which the channel serves as a
|
||||
reference channel. By default, no channels are selected. This prop-
|
||||
erty is only available for the generic channels.
|
||||
|
||||
azoteq,assoc-weight:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
default: 0
|
||||
description:
|
||||
Specifies the channel's impact weight if it acts as an associated
|
||||
channel (0 = 0% impact, 255 = 200% impact). This property is only
|
||||
available for the generic channels.
|
||||
|
||||
patternProperties:
|
||||
"^event-(prox|touch|deep)(-alt)?$":
|
||||
type: object
|
||||
description:
|
||||
Represents a proximity, touch or deep-touch event reported by the
|
||||
channel in response to a decrease in counts. Node names suffixed with
|
||||
'-alt' instead correspond to an increase in counts.
|
||||
|
||||
By default, the long-term average tracks an increase in counts such
|
||||
that only events corresponding to a decrease in counts are reported
|
||||
(refer to the datasheet for more information).
|
||||
|
||||
Specify 'azoteq,dual-direction' to freeze the long-term average when
|
||||
the counts increase or decrease such that events of either direction
|
||||
can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
|
||||
vert the polarity of the states reported by the channel.
|
||||
|
||||
Complementary events (e.g. event-touch and event-touch-alt) can both
|
||||
be present and specify different key or switch codes, but not differ-
|
||||
ent thresholds or hysteresis (if applicable).
|
||||
|
||||
Proximity events are unavailable in the case of the Hall channel, and
|
||||
deep-touch events are only available for the generic channels. Unless
|
||||
otherwise specified, default values are a function of the channel and
|
||||
the device's RUI.
|
||||
|
||||
properties:
|
||||
azoteq,thresh:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
description: Specifies the threshold for the event.
|
||||
|
||||
azoteq,hyst:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 15
|
||||
description:
|
||||
Specifies the hysteresis for the event (touch and deep-touch
|
||||
events only).
|
||||
|
||||
linux,code:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: Numeric key or switch code associated with the event.
|
||||
|
||||
linux,input-type:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 5]
|
||||
description:
|
||||
Specifies whether the event is to be interpreted as a key (1) or
|
||||
a switch (5). By default, Hall-channel events are interpreted as
|
||||
switches and all others are interpreted as keys.
|
||||
|
||||
dependencies:
|
||||
linux,input-type: ["linux,code"]
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
dependencies:
|
||||
azoteq,assoc-weight: ["azoteq,assoc-select"]
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
"^trackpad-3x[2-3]$":
|
||||
type: object
|
||||
description:
|
||||
Represents all channels associated with the trackpad. The channels are
|
||||
collectively active if the trackpad is defined and inactive otherwise.
|
||||
|
||||
properties:
|
||||
azoteq,ati-exclude:
|
||||
type: boolean
|
||||
description:
|
||||
Prevents the trackpad channels from participating in an ATI event
|
||||
that is manually triggered during initialization.
|
||||
|
||||
azoteq,reseed-disable:
|
||||
type: boolean
|
||||
description:
|
||||
Prevents the trackpad channels from being reseeded if the long-term
|
||||
average timeout (defined in 'azoteq,timeout-lta') expires.
|
||||
|
||||
azoteq,meas-cap-decrease:
|
||||
type: boolean
|
||||
description:
|
||||
Decreases the internal measurement capacitance from 60 pF to 15 pF.
|
||||
|
||||
azoteq,rx-inactive:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies how inactive CRX pins are to be terminated as follows:
|
||||
0: VSS
|
||||
1: Floating
|
||||
|
||||
azoteq,linearize:
|
||||
type: boolean
|
||||
description: Inverts the polarity of the trackpad's touch state.
|
||||
|
||||
azoteq,dual-direction:
|
||||
type: boolean
|
||||
description:
|
||||
Specifies that the trackpad's long-term averages are to freeze in
|
||||
the presence of either increasing or decreasing counts, thereby
|
||||
permitting events to be reported in either direction.
|
||||
|
||||
azoteq,filt-disable:
|
||||
type: boolean
|
||||
description: Disables raw count filtering for the trackpad channels.
|
||||
|
||||
azoteq,ati-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the trackpad's ATI mode as follows:
|
||||
0: Disabled
|
||||
1: Semi-partial
|
||||
2: Partial
|
||||
3: Full
|
||||
|
||||
azoteq,ati-base:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 6
|
||||
maxItems: 9
|
||||
items:
|
||||
minimum: 45
|
||||
maximum: 300
|
||||
default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
|
||||
description: Specifies each individual trackpad channel's ATI base.
|
||||
|
||||
azoteq,ati-target:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
multipleOf: 32
|
||||
minimum: 0
|
||||
maximum: 2016
|
||||
default: 0
|
||||
description: Specifies the trackpad's ATI target.
|
||||
|
||||
azoteq,cct-increase:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 4
|
||||
default: 0
|
||||
description:
|
||||
Specifies the degree to which the trackpad's charge cycle time is to
|
||||
be increased, with 0 representing no increase.
|
||||
|
||||
azoteq,proj-bias:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the bias current applied during projected-capacitance
|
||||
sensing as follows:
|
||||
0: 2.5 uA
|
||||
1: 5 uA
|
||||
2: 10 uA
|
||||
3: 20 uA
|
||||
|
||||
azoteq,sense-freq:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the trackpad's sensing frequency as follows (parenthesized
|
||||
numbers represent the frequency if 'azoteq,clk-div' is present):
|
||||
0: 4 MHz (1 MHz)
|
||||
1: 2 MHz (500 kHz)
|
||||
2: 1 MHz (250 kHz)
|
||||
3: 500 kHz (125 kHz)
|
||||
|
||||
azoteq,ati-band-tighten:
|
||||
type: boolean
|
||||
description:
|
||||
Tightens the ATI band from 1/8 to 1/16 of the desired target.
|
||||
|
||||
azoteq,thresh:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 6
|
||||
maxItems: 9
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
|
||||
description:
|
||||
Specifies each individual trackpad channel's touch threshold.
|
||||
|
||||
azoteq,hyst:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 15
|
||||
default: 0
|
||||
description: Specifies the trackpad's touch hysteresis.
|
||||
|
||||
azoteq,lta-update:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||
default: 0
|
||||
description: |
|
||||
Specifies the update rate of the trackpad's long-term average during
|
||||
ultra-low-power mode as follows:
|
||||
0: 2
|
||||
1: 4
|
||||
2: 8
|
||||
3: 16
|
||||
4: 32
|
||||
5: 64
|
||||
6: 128
|
||||
7: 255
|
||||
|
||||
azoteq,filt-str-trackpad:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: Specifies the trackpad coordinate filter strength.
|
||||
|
||||
azoteq,filt-str-np-cnt:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the raw count filter strength during normal-power mode.
|
||||
|
||||
azoteq,filt-str-lp-cnt:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description:
|
||||
Specifies the raw count filter strength during low-power mode.
|
||||
|
||||
linux,keycodes:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
minItems: 1
|
||||
maxItems: 6
|
||||
description: |
|
||||
Specifies the numeric keycodes associated with each available gesture
|
||||
in the following order (enter 0 for unused gestures):
|
||||
0: Positive flick or swipe in X direction
|
||||
1: Negative flick or swipe in X direction
|
||||
2: Positive flick or swipe in Y direction
|
||||
3: Negative flick or swipe in Y direction
|
||||
4: Tap
|
||||
5: Hold
|
||||
|
||||
azoteq,gesture-swipe:
|
||||
type: boolean
|
||||
description:
|
||||
Directs the device to interpret axial gestures as a swipe (finger
|
||||
remains on trackpad) instead of a flick (finger leaves trackpad).
|
||||
|
||||
azoteq,timeout-tap-ms:
|
||||
multipleOf: 16
|
||||
minimum: 0
|
||||
maximum: 4080
|
||||
default: 0
|
||||
description:
|
||||
Specifies the length of time (in ms) within which a trackpad touch
|
||||
must be released in order to be interpreted as a tap.
|
||||
|
||||
azoteq,timeout-swipe-ms:
|
||||
multipleOf: 16
|
||||
minimum: 0
|
||||
maximum: 4080
|
||||
default: 0
|
||||
description:
|
||||
Specifies the length of time (in ms) within which an axial gesture
|
||||
must be completed in order to be interpreted as a flick or swipe.
|
||||
|
||||
azoteq,thresh-swipe:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
default: 0
|
||||
description:
|
||||
Specifies the number of points across which an axial gesture must
|
||||
travel in order to be interpreted as a flick or swipe.
|
||||
|
||||
dependencies:
|
||||
azoteq,gesture-swipe: ["linux,keycodes"]
|
||||
azoteq,timeout-tap-ms: ["linux,keycodes"]
|
||||
azoteq,timeout-swipe-ms: ["linux,keycodes"]
|
||||
azoteq,thresh-swipe: ["linux,keycodes"]
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
iqs626a@44 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
compatible = "azoteq,iqs626a";
|
||||
reg = <0x44>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
azoteq,rate-np-ms = <16>;
|
||||
azoteq,rate-lp-ms = <160>;
|
||||
|
||||
azoteq,timeout-pwr-ms = <2560>;
|
||||
azoteq,timeout-lta-ms = <32768>;
|
||||
|
||||
ulp-0 {
|
||||
azoteq,meas-cap-decrease;
|
||||
|
||||
azoteq,ati-base = <75>;
|
||||
azoteq,ati-target = <1024>;
|
||||
|
||||
azoteq,rx-enable = <2>, <3>, <4>,
|
||||
<5>, <6>, <7>;
|
||||
|
||||
event-prox {
|
||||
linux,code = <KEY_POWER>;
|
||||
};
|
||||
};
|
||||
|
||||
trackpad-3x3 {
|
||||
azoteq,filt-str-np-cnt = <1>;
|
||||
azoteq,filt-str-lp-cnt = <1>;
|
||||
|
||||
azoteq,hyst = <4>;
|
||||
azoteq,thresh = <35>, <40>, <40>,
|
||||
<38>, <33>, <38>,
|
||||
<35>, <35>, <35>;
|
||||
|
||||
azoteq,ati-mode = <3>;
|
||||
azoteq,ati-base = <195>, <195>, <195>,
|
||||
<195>, <195>, <195>,
|
||||
<195>, <195>, <195>;
|
||||
azoteq,ati-target = <512>;
|
||||
|
||||
azoteq,proj-bias = <1>;
|
||||
azoteq,sense-freq = <2>;
|
||||
|
||||
linux,keycodes = <KEY_VOLUMEUP>,
|
||||
<KEY_VOLUMEDOWN>,
|
||||
<KEY_NEXTSONG>,
|
||||
<KEY_PREVIOUSSONG>,
|
||||
<KEY_PLAYPAUSE>,
|
||||
<KEY_STOPCD>;
|
||||
|
||||
azoteq,gesture-swipe;
|
||||
azoteq,timeout-swipe-ms = <800>;
|
||||
azoteq,timeout-tap-ms = <400>;
|
||||
azoteq,thresh-swipe = <40>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Preserve the default register settings for
|
||||
* the temperature-tracking channel leveraged
|
||||
* by reset user interface (RUI) 1.
|
||||
*
|
||||
* Scalar properties (e.g. ATI mode) are left
|
||||
* untouched by simply omitting them; boolean
|
||||
* properties must be specified explicitly as
|
||||
* needed.
|
||||
*/
|
||||
generic-2 {
|
||||
azoteq,reseed-disable;
|
||||
azoteq,meas-cap-decrease;
|
||||
azoteq,dual-direction;
|
||||
azoteq,comp-disable;
|
||||
azoteq,static-enable;
|
||||
};
|
||||
|
||||
hall {
|
||||
azoteq,reseed-disable;
|
||||
azoteq,meas-cap-decrease;
|
||||
|
||||
event-touch {
|
||||
linux,code = <SW_LID>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@ -0,0 +1,75 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
|
||||
|
||||
maintainers:
|
||||
- Jeff LaBundy <jeff@labundy.com>
|
||||
|
||||
description: |
|
||||
The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers
|
||||
employ projected-capacitance sensing and can track up to five independent
|
||||
contacts.
|
||||
|
||||
Link to datasheet: https://www.azoteq.com/
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- azoteq,iqs550
|
||||
- azoteq,iqs572
|
||||
- azoteq,iqs525
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
wakeup-source: true
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
touchscreen@74 {
|
||||
compatible = "azoteq,iqs550";
|
||||
reg = <0x74>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW |
|
||||
GPIO_PUSH_PULL)>;
|
||||
|
||||
touchscreen-size-x = <800>;
|
||||
touchscreen-size-y = <480>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@ -0,0 +1,119 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Hycon HY46XX series touchscreen controller bindings
|
||||
|
||||
description: |
|
||||
There are 6 variants of the chip for various touch panel sizes and cover lens material
|
||||
Glass: 0.3mm--4.0mm
|
||||
PET/PMMA: 0.2mm--2.0mm
|
||||
HY4613(B)-N048 < 6"
|
||||
HY4614(B)-N068 7" .. 10.1"
|
||||
HY4621-NS32 < 5"
|
||||
HY4623-NS48 5.1" .. 7"
|
||||
Glass: 0.3mm--8.0mm
|
||||
PET/PMMA: 0.2mm--4.0mm
|
||||
HY4633(B)-N048 < 6"
|
||||
HY4635(B)-N048 < 7" .. 10.1"
|
||||
|
||||
maintainers:
|
||||
- Giulio Benetti <giulio.benetti@benettiengineering.com>
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- hycon,hy4613
|
||||
- hycon,hy4614
|
||||
- hycon,hy4621
|
||||
- hycon,hy4623
|
||||
- hycon,hy4633
|
||||
- hycon,hy4635
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
vcc-supply: true
|
||||
|
||||
hycon,threshold:
|
||||
description: Allows setting the sensitivity in the range from 0 to 255.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 255
|
||||
|
||||
hycon,glove-enable:
|
||||
type: boolean
|
||||
description: Allows enabling glove setting.
|
||||
|
||||
hycon,report-speed-hz:
|
||||
description: Allows setting the report speed in Hertz.
|
||||
minimum: 1
|
||||
maximum: 255
|
||||
|
||||
hycon,noise-filter-enable:
|
||||
type: boolean
|
||||
description: Allows enabling power noise filter.
|
||||
|
||||
hycon,filter-data:
|
||||
description: Allows setting how many samples throw before reporting touch
|
||||
in the range from 0 to 5.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 5
|
||||
|
||||
hycon,gain:
|
||||
description: Allows setting the sensitivity distance in the range from 0 to 5.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 5
|
||||
|
||||
hycon,edge-offset:
|
||||
description: Allows setting the edge compensation in the range from 0 to 16.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 0
|
||||
maximum: 16
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
touchscreen-fuzz-x: true
|
||||
touchscreen-fuzz-y: true
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
interrupt-controller: true
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
touchscreen@1c {
|
||||
compatible = "hycon,hy4633";
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@ -0,0 +1,73 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Ilitek I2C Touchscreen Controller
|
||||
|
||||
maintainers:
|
||||
- Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- ilitek,ili2130
|
||||
- ilitek,ili2131
|
||||
- ilitek,ili2132
|
||||
- ilitek,ili2316
|
||||
- ilitek,ili2322
|
||||
- ilitek,ili2323
|
||||
- ilitek,ili2326
|
||||
- ilitek,ili2520
|
||||
- ilitek,ili2521
|
||||
|
||||
reg:
|
||||
const: 0x41
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
wakeup-source:
|
||||
type: boolean
|
||||
description: touchscreen can be used as a wakeup source.
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- reset-gpios
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
touchscreen@41 {
|
||||
compatible = "ilitek,ili2520";
|
||||
reg = <0x41>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
touchscreen-inverted-y;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
@ -1,80 +0,0 @@
|
||||
Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : Must be equal to one of the following:
|
||||
"azoteq,iqs550"
|
||||
"azoteq,iqs572"
|
||||
"azoteq,iqs525"
|
||||
|
||||
- reg : I2C slave address for the device.
|
||||
|
||||
- interrupts : GPIO to which the device's active-high RDY
|
||||
output is connected (see [0]).
|
||||
|
||||
- reset-gpios : GPIO to which the device's active-low NRST
|
||||
input is connected (see [1]).
|
||||
|
||||
Optional properties:
|
||||
|
||||
- touchscreen-min-x : See [2].
|
||||
|
||||
- touchscreen-min-y : See [2].
|
||||
|
||||
- touchscreen-size-x : See [2]. If this property is omitted, the
|
||||
maximum x-coordinate is specified by the
|
||||
device's "X Resolution" register.
|
||||
|
||||
- touchscreen-size-y : See [2]. If this property is omitted, the
|
||||
maximum y-coordinate is specified by the
|
||||
device's "Y Resolution" register.
|
||||
|
||||
- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of
|
||||
the deltas across all channels impacted by a
|
||||
touch event. A channel's delta is calculated
|
||||
as its count value minus a reference, where
|
||||
the count value is inversely proportional to
|
||||
the channel's capacitance.
|
||||
|
||||
- touchscreen-fuzz-x : See [2].
|
||||
|
||||
- touchscreen-fuzz-y : See [2].
|
||||
|
||||
- touchscreen-fuzz-pressure : See [2].
|
||||
|
||||
- touchscreen-inverted-x : See [2]. Inversion is applied relative to that
|
||||
which may already be specified by the device's
|
||||
FLIP_X and FLIP_Y register fields.
|
||||
|
||||
- touchscreen-inverted-y : See [2]. Inversion is applied relative to that
|
||||
which may already be specified by the device's
|
||||
FLIP_X and FLIP_Y register fields.
|
||||
|
||||
- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that
|
||||
which may already be specified by the device's
|
||||
SWITCH_XY_AXIS register field.
|
||||
|
||||
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||||
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
|
||||
[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
|
||||
|
||||
Example:
|
||||
|
||||
&i2c1 {
|
||||
/* ... */
|
||||
|
||||
touchscreen@74 {
|
||||
compatible = "azoteq,iqs550";
|
||||
reg = <0x74>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <17 4>;
|
||||
reset-gpios = <&gpio 27 1>;
|
||||
|
||||
touchscreen-size-x = <640>;
|
||||
touchscreen-size-y = <480>;
|
||||
|
||||
touchscreen-max-pressure = <16000>;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
@ -0,0 +1,87 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Melfas MMS114 family touchscreen controller bindings
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^touchscreen(@.*)?$"
|
||||
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- melfas,mms114
|
||||
- melfas,mms134s
|
||||
- melfas,mms136
|
||||
- melfas,mms152
|
||||
- melfas,mms345l
|
||||
|
||||
reg:
|
||||
description: I2C address
|
||||
|
||||
clock-frequency:
|
||||
description: I2C client clock frequency, defined for host
|
||||
minimum: 100000
|
||||
maximum: 400000
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
avdd-supply:
|
||||
description: Analog power supply regulator on AVDD pin
|
||||
|
||||
vdd-supply:
|
||||
description: Digital power supply regulator on VDD pin
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
touchscreen-fuzz-x: true
|
||||
touchscreen-fuzz-y: true
|
||||
touchscreen-fuzz-pressure: true
|
||||
touchscreen-inverted-x: true
|
||||
touchscreen-inverted-y: true
|
||||
touchscreen-swapped-x-y: true
|
||||
touchscreen-max-pressure: true
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- touchscreen-size-x
|
||||
- touchscreen-size-y
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
touchscreen@48 {
|
||||
compatible = "melfas,mms114";
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&gpio>;
|
||||
interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
|
||||
avdd-supply = <&ldo1_reg>;
|
||||
vdd-supply = <&ldo2_reg>;
|
||||
touchscreen-size-x = <720>;
|
||||
touchscreen-size-y = <1280>;
|
||||
touchscreen-fuzz-x = <10>;
|
||||
touchscreen-fuzz-y = <10>;
|
||||
touchscreen-fuzz-pressure = <10>;
|
||||
touchscreen-inverted-x;
|
||||
touchscreen-inverted-y;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@ -1,42 +0,0 @@
|
||||
* MELFAS MMS114/MMS152/MMS345L touchscreen controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of:
|
||||
- "melfas,mms114"
|
||||
- "melfas,mms152"
|
||||
- "melfas,mms345l"
|
||||
- reg: I2C address of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- touchscreen-size-x: See [1]
|
||||
- touchscreen-size-y: See [1]
|
||||
|
||||
Optional properties:
|
||||
- touchscreen-fuzz-x: See [1]
|
||||
- touchscreen-fuzz-y: See [1]
|
||||
- touchscreen-fuzz-pressure: See [1]
|
||||
- touchscreen-inverted-x: See [1]
|
||||
- touchscreen-inverted-y: See [1]
|
||||
- touchscreen-swapped-x-y: See [1]
|
||||
|
||||
[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
|
||||
|
||||
Example:
|
||||
|
||||
i2c@00000000 {
|
||||
/* ... */
|
||||
|
||||
touchscreen@48 {
|
||||
compatible = "melfas,mms114";
|
||||
reg = <0x48>;
|
||||
interrupts = <39 0>;
|
||||
touchscreen-size-x = <720>;
|
||||
touchscreen-size-y = <1280>;
|
||||
touchscreen-fuzz-x = <10>;
|
||||
touchscreen-fuzz-y = <10>;
|
||||
touchscreen-fuzz-pressure = <10>;
|
||||
touchscreen-inverted-x;
|
||||
touchscreen-inverted-y;
|
||||
};
|
||||
|
||||
/* ... */
|
||||
};
|
||||
@ -0,0 +1,69 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: MStar msg2638 touchscreen controller Bindings
|
||||
|
||||
maintainers:
|
||||
- Vincent Knecht <vincent.knecht@mailoo.org>
|
||||
|
||||
allOf:
|
||||
- $ref: touchscreen.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: mstar,msg2638
|
||||
|
||||
reg:
|
||||
const: 0x26
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
vdd-supply:
|
||||
description: Power supply regulator for the chip
|
||||
|
||||
vddio-supply:
|
||||
description: Power supply regulator for the I2C bus
|
||||
|
||||
touchscreen-size-x: true
|
||||
touchscreen-size-y: true
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- reset-gpios
|
||||
- touchscreen-size-x
|
||||
- touchscreen-size-y
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
touchscreen@26 {
|
||||
compatible = "mstar,msg2638";
|
||||
reg = <0x26>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_int_reset_default>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l5>;
|
||||
touchscreen-size-x = <2048>;
|
||||
touchscreen-size-y = <2048>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@ -22,6 +22,9 @@ properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
required:
|
||||
@ -29,6 +32,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupt-controller
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
|
||||
57
Documentation/devicetree/bindings/leds/leds-rt4505.yaml
Normal file
57
Documentation/devicetree/bindings/leds/leds-rt4505.yaml
Normal file
@ -0,0 +1,57 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Richtek RT4505 Single Channel LED Driver
|
||||
|
||||
maintainers:
|
||||
- ChiYuan Huang <cy_huang@richtek.com>
|
||||
|
||||
description: |
|
||||
The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for
|
||||
torch and flash mode, respectively.
|
||||
|
||||
The data sheet can be found at:
|
||||
https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: richtek,rt4505
|
||||
|
||||
reg:
|
||||
description: I2C slave address of the controller.
|
||||
maxItems: 1
|
||||
|
||||
led:
|
||||
type: object
|
||||
$ref: common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led-controller@63 {
|
||||
compatible = "richtek,rt4505";
|
||||
reg = <0x63>;
|
||||
|
||||
rt4505_flash: led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-max-microamp = <375000>;
|
||||
flash-max-microamp = <1500000>;
|
||||
flash-max-timeout-us = <800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -193,9 +193,21 @@ required:
|
||||
- interrupts
|
||||
- clocks
|
||||
- power-domains
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
not:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- renesas,vin-r8a7778
|
||||
- renesas,vin-r8a7779
|
||||
then:
|
||||
required:
|
||||
- resets
|
||||
|
||||
if:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
@ -203,10 +215,10 @@ if:
|
||||
- renesas,vin-r8a7778
|
||||
- renesas,vin-r8a7779
|
||||
- renesas,rcar-gen2-vin
|
||||
then:
|
||||
then:
|
||||
required:
|
||||
- port
|
||||
else:
|
||||
else:
|
||||
required:
|
||||
- renesas,id
|
||||
- ports
|
||||
|
||||
@ -1,38 +0,0 @@
|
||||
Sigma Designs Tango4 NAND Flash Controller (NFC)
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "sigma,smp8758-nand"
|
||||
- reg: address/size of nfc_reg, nfc_mem, and pbus_reg
|
||||
- dmas: reference to the DMA channel used by the controller
|
||||
- dma-names: "rxtx"
|
||||
- clocks: reference to the system clock
|
||||
- #address-cells: <1>
|
||||
- #size-cells: <0>
|
||||
|
||||
Children nodes represent the available NAND chips.
|
||||
See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
|
||||
|
||||
Example:
|
||||
|
||||
nandc: nand-controller@2c000 {
|
||||
compatible = "sigma,smp8758-nand";
|
||||
reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
|
||||
dmas = <&dma0 3>;
|
||||
dma-names = "rxtx";
|
||||
clocks = <&clkgen SYS_CLK>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nand@0 {
|
||||
reg = <0>; /* CS0 */
|
||||
nand-ecc-strength = <14>;
|
||||
nand-ecc-step-size = <1024>;
|
||||
};
|
||||
|
||||
nand@1 {
|
||||
reg = <1>; /* CS1 */
|
||||
nand-ecc-strength = <14>;
|
||||
nand-ecc-step-size = <1024>;
|
||||
};
|
||||
};
|
||||
@ -51,12 +51,12 @@ properties:
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
items:
|
||||
- description: AVB functional clock
|
||||
- description: Optional TXC reference clock
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: fck
|
||||
- const: refclk
|
||||
|
||||
@ -1,43 +0,0 @@
|
||||
HiSilicon Hip05 and Hip06 PCIe host bridge DT description
|
||||
|
||||
HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
|
||||
It shares common functions with the PCIe DesignWare core driver and inherits
|
||||
common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
|
||||
Additional properties are described here:
|
||||
|
||||
Required properties
|
||||
- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
|
||||
- reg: Should contain rc_dbi, config registers location and length.
|
||||
- reg-names: Must include the following entries:
|
||||
"rc_dbi": controller configuration registers;
|
||||
"config": PCIe configuration space registers.
|
||||
- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
|
||||
- port-id: Should be 0, 1, 2 or 3.
|
||||
|
||||
Optional properties:
|
||||
- status: Either "ok" or "disabled".
|
||||
- dma-coherent: Present if DMA operations are coherent.
|
||||
|
||||
Hip05 Example (note that Hip06 is the same except compatible):
|
||||
pcie@b0080000 {
|
||||
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
|
||||
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
|
||||
reg-names = "rc_dbi", "config";
|
||||
bus-range = <0 15>;
|
||||
msi-parent = <&its_pcie>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
dma-coherent;
|
||||
ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
|
||||
num-lanes = <8>;
|
||||
port-id = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
|
||||
0x0 0 0 2 &mbigen_pcie 2 11
|
||||
0x0 0 0 3 &mbigen_pcie 3 12
|
||||
0x0 0 0 4 &mbigen_pcie 4 13>;
|
||||
};
|
||||
181
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
Normal file
181
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
Normal file
@ -0,0 +1,181 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Gen3 PCIe controller on MediaTek SoCs
|
||||
|
||||
maintainers:
|
||||
- Jianjun Wang <jianjun.wang@mediatek.com>
|
||||
|
||||
description: |+
|
||||
PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
|
||||
and compatible with Gen2, Gen1 speed.
|
||||
|
||||
This PCIe controller supports up to 256 MSI vectors, the MSI hardware
|
||||
block diagram is as follows:
|
||||
|
||||
+-----+
|
||||
| GIC |
|
||||
+-----+
|
||||
^
|
||||
|
|
||||
port->irq
|
||||
|
|
||||
+-+-+-+-+-+-+-+-+
|
||||
|0|1|2|3|4|5|6|7| (PCIe intc)
|
||||
+-+-+-+-+-+-+-+-+
|
||||
^ ^ ^
|
||||
| | ... |
|
||||
+-------+ +------+ +-----------+
|
||||
| | |
|
||||
+-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
|
||||
|0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
|
||||
+-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
|
||||
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
|
||||
| | | | | | | | | | | | (MSI vectors)
|
||||
| | | | | | | | | | | |
|
||||
|
||||
(MSI SET0) (MSI SET1) ... (MSI SET7)
|
||||
|
||||
With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
|
||||
each set has its own address for MSI message, and supports 32 MSI vectors
|
||||
to generate interrupt.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: mediatek,mt8192-pcie
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: pcie-mac
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
ranges:
|
||||
minItems: 1
|
||||
maxItems: 8
|
||||
|
||||
resets:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
reset-names:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
items:
|
||||
- const: phy
|
||||
- const: mac
|
||||
|
||||
clocks:
|
||||
maxItems: 6
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: pl_250m
|
||||
- const: tl_26m
|
||||
- const: tl_96m
|
||||
- const: tl_32k
|
||||
- const: peri_26m
|
||||
- const: top_133m
|
||||
|
||||
assigned-clocks:
|
||||
maxItems: 1
|
||||
|
||||
assigned-clock-parents:
|
||||
maxItems: 1
|
||||
|
||||
phys:
|
||||
maxItems: 1
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
|
||||
interrupt-controller:
|
||||
description: Interrupt controller node for handling legacy PCI interrupts.
|
||||
type: object
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 0
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
interrupt-controller: true
|
||||
|
||||
required:
|
||||
- '#address-cells'
|
||||
- '#interrupt-cells'
|
||||
- interrupt-controller
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- ranges
|
||||
- clocks
|
||||
- '#interrupt-cells'
|
||||
- interrupt-controller
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
pcie: pcie@11230000 {
|
||||
compatible = "mediatek,mt8192-pcie";
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
reg = <0x00 0x11230000 0x00 0x4000>;
|
||||
reg-names = "pcie-mac";
|
||||
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
bus-range = <0x00 0xff>;
|
||||
ranges = <0x82000000 0x00 0x12000000 0x00
|
||||
0x12000000 0x00 0x1000000>;
|
||||
clocks = <&infracfg 44>,
|
||||
<&infracfg 40>,
|
||||
<&infracfg 43>,
|
||||
<&infracfg 97>,
|
||||
<&infracfg 99>,
|
||||
<&infracfg 111>;
|
||||
clock-names = "pl_250m", "tl_26m", "tl_96m",
|
||||
"tl_32k", "peri_26m", "top_133m";
|
||||
assigned-clocks = <&topckgen 50>;
|
||||
assigned-clock-parents = <&topckgen 91>;
|
||||
|
||||
phys = <&pciephy>;
|
||||
phy-names = "pcie-phy";
|
||||
|
||||
resets = <&infracfg_rst 2>,
|
||||
<&infracfg_rst 3>;
|
||||
reset-names = "phy", "mac";
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &pcie_intc 0>,
|
||||
<0 0 0 2 &pcie_intc 1>,
|
||||
<0 0 0 3 &pcie_intc 2>,
|
||||
<0 0 0 4 &pcie_intc 3>;
|
||||
pcie_intc: interrupt-controller {
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -17,6 +17,7 @@ allOf:
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: renesas,pcie-r8a7779 # R-Car H1
|
||||
- items:
|
||||
- enum:
|
||||
- renesas,pcie-r8a7742 # RZ/G1H
|
||||
@ -74,6 +75,15 @@ required:
|
||||
- clocks
|
||||
- clock-names
|
||||
- power-domains
|
||||
|
||||
if:
|
||||
not:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: renesas,pcie-r8a7779
|
||||
then:
|
||||
required:
|
||||
- resets
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
113
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
Normal file
113
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
Normal file
@ -0,0 +1,113 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: SiFive FU740 PCIe host controller
|
||||
|
||||
description: |+
|
||||
SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
|
||||
PCI core. It shares common features with the PCIe DesignWare core and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
|
||||
maintainers:
|
||||
- Paul Walmsley <paul.walmsley@sifive.com>
|
||||
- Greentime Hu <greentime.hu@sifive.com>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: sifive,fu740-pcie
|
||||
|
||||
reg:
|
||||
maxItems: 3
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: dbi
|
||||
- const: config
|
||||
- const: mgmt
|
||||
|
||||
num-lanes:
|
||||
const: 8
|
||||
|
||||
msi-parent: true
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: msi
|
||||
- const: inta
|
||||
- const: intb
|
||||
- const: intc
|
||||
- const: intd
|
||||
|
||||
resets:
|
||||
description: A phandle to the PCIe power up reset line.
|
||||
maxItems: 1
|
||||
|
||||
pwren-gpios:
|
||||
description: Should specify the GPIO for controlling the PCI bus device power on.
|
||||
maxItems: 1
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- dma-coherent
|
||||
- num-lanes
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- interrupt-parent
|
||||
- interrupt-map-mask
|
||||
- interrupt-map
|
||||
- clock-names
|
||||
- clocks
|
||||
- resets
|
||||
- pwren-gpios
|
||||
- reset-gpios
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
#include <dt-bindings/clock/sifive-fu740-prci.h>
|
||||
|
||||
pcie@e00000000 {
|
||||
compatible = "sifive,fu740-pcie";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xe 0x00000000 0x0 0x80000000>,
|
||||
<0xd 0xf0000000 0x0 0x10000000>,
|
||||
<0x0 0x100d0000 0x0 0x1000>;
|
||||
reg-names = "dbi", "config", "mgmt";
|
||||
device_type = "pci";
|
||||
dma-coherent;
|
||||
bus-range = <0x0 0xff>;
|
||||
ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */
|
||||
<0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */
|
||||
<0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */
|
||||
<0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */
|
||||
num-lanes = <0x8>;
|
||||
interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
|
||||
interrupt-names = "msi", "inta", "intb", "intc", "intd";
|
||||
interrupt-parent = <&plic0>;
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
|
||||
<0x0 0x0 0x0 0x2 &plic0 58>,
|
||||
<0x0 0x0 0x0 0x3 &plic0 59>,
|
||||
<0x0 0x0 0x0 0x4 &plic0 60>;
|
||||
clock-names = "pcie_aux";
|
||||
clocks = <&prci PRCI_CLK_PCIE_AUX>;
|
||||
resets = <&prci 4>;
|
||||
pwren-gpios = <&gpio 5 0>;
|
||||
reset-gpios = <&gpio 8 0>;
|
||||
};
|
||||
};
|
||||
@ -1,29 +0,0 @@
|
||||
Sigma Designs Tango PCIe controller
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "sigma,smp8759-pcie"
|
||||
- reg: address/size of PCI configuration space, address/size of register area
|
||||
- bus-range: defined by size of PCI configuration space
|
||||
- device_type: "pci"
|
||||
- #size-cells: <2>
|
||||
- #address-cells: <3>
|
||||
- msi-controller
|
||||
- ranges: translation from system to bus addresses
|
||||
- interrupts: spec for misc interrupts, spec for MSI
|
||||
|
||||
Example:
|
||||
|
||||
pcie@2e000 {
|
||||
compatible = "sigma,smp8759-pcie";
|
||||
reg = <0x50000000 0x400000>, <0x2e000 0x100>;
|
||||
bus-range = <0 3>;
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
msi-controller;
|
||||
ranges = <0x02000000 0x0 0x00400000 0x50400000 0x0 0x3c00000>;
|
||||
interrupts =
|
||||
<54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */
|
||||
<55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */
|
||||
};
|
||||
@ -16,13 +16,15 @@ allOf:
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,j721e-pcie-ep
|
||||
- description: PCIe EP controller in AM64
|
||||
items:
|
||||
- const: ti,am64-pcie-ep
|
||||
- const: ti,j721e-pcie-ep
|
||||
- description: PCIe EP controller in J7200
|
||||
items:
|
||||
- const: ti,j7200-pcie-ep
|
||||
- const: ti,j721e-pcie-ep
|
||||
- description: PCIe EP controller in J721E
|
||||
items:
|
||||
- const: ti,j721e-pcie-ep
|
||||
|
||||
reg:
|
||||
maxItems: 4
|
||||
@ -66,7 +68,6 @@ required:
|
||||
- power-domains
|
||||
- clocks
|
||||
- clock-names
|
||||
- dma-coherent
|
||||
- max-functions
|
||||
- phys
|
||||
- phy-names
|
||||
|
||||
@ -16,13 +16,15 @@ allOf:
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,j721e-pcie-host
|
||||
- description: PCIe controller in AM64
|
||||
items:
|
||||
- const: ti,am64-pcie-host
|
||||
- const: ti,j721e-pcie-host
|
||||
- description: PCIe controller in J7200
|
||||
items:
|
||||
- const: ti,j7200-pcie-host
|
||||
- const: ti,j721e-pcie-host
|
||||
- description: PCIe controller in J721E
|
||||
items:
|
||||
- const: ti,j721e-pcie-host
|
||||
|
||||
reg:
|
||||
maxItems: 4
|
||||
@ -46,12 +48,17 @@ properties:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description: clock-specifier to represent input to the PCIe
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
description: |+
|
||||
clock-specifier to represent input to the PCIe for 1 item.
|
||||
2nd item if present represents reference clock to the connector.
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: fck
|
||||
- const: pcie_refclk
|
||||
|
||||
vendor-id:
|
||||
const: 0x104c
|
||||
@ -62,6 +69,8 @@ properties:
|
||||
- const: 0xb00d
|
||||
- items:
|
||||
- const: 0xb00f
|
||||
- items:
|
||||
- const: 0xb010
|
||||
|
||||
msi-map: true
|
||||
|
||||
@ -78,7 +87,6 @@ required:
|
||||
- vendor-id
|
||||
- device-id
|
||||
- msi-map
|
||||
- dma-coherent
|
||||
- dma-ranges
|
||||
- ranges
|
||||
- reset-gpios
|
||||
|
||||
@ -33,6 +33,8 @@ Required properties:
|
||||
- #address-cells: specifies the number of cells needed to encode an
|
||||
address. The value must be 0.
|
||||
|
||||
Optional properties:
|
||||
- dma-coherent: present if DMA operations are coherent
|
||||
|
||||
Example:
|
||||
++++++++
|
||||
|
||||
@ -51,23 +51,7 @@ Deprecated properties for iomux controller:
|
||||
Use rockchip,grf and rockchip,pmu described above instead.
|
||||
|
||||
Required properties for gpio sub nodes:
|
||||
- compatible: "rockchip,gpio-bank"
|
||||
- reg: register of the gpio bank (different than the iomux registerset)
|
||||
- interrupts: base interrupt of the gpio bank in the interrupt controller
|
||||
- clocks: clock that drives this bank
|
||||
- gpio-controller: identifies the node as a gpio controller and pin bank.
|
||||
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
|
||||
binding is used, the amount of cells must be specified as 2. See generic
|
||||
GPIO binding documentation for description of particular cells.
|
||||
- interrupt-controller: identifies the controller node as interrupt-parent.
|
||||
- #interrupt-cells: the value of this property should be 2 and the interrupt
|
||||
cells should use the standard two-cell scheme described in
|
||||
bindings/interrupt-controller/interrupts.txt
|
||||
|
||||
Deprecated properties for gpio sub nodes:
|
||||
- compatible: "rockchip,rk3188-gpio-bank0"
|
||||
- reg: second element: separate pull register for rk3188 bank0, use
|
||||
rockchip,pmu described above instead
|
||||
See rockchip,gpio-bank.yaml
|
||||
|
||||
Required properties for pin configuration node:
|
||||
- rockchip,pins: 3 integers array, represents a group of pins mux and config
|
||||
@ -128,43 +112,3 @@ uart2: serial@20064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_xfer>;
|
||||
};
|
||||
|
||||
Example for rk3188:
|
||||
|
||||
pinctrl@20008000 {
|
||||
compatible = "rockchip,rk3188-pinctrl";
|
||||
rockchip,grf = <&grf>;
|
||||
rockchip,pmu = <&pmu>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gpio0: gpio0@2000a000 {
|
||||
compatible = "rockchip,rk3188-gpio-bank0";
|
||||
reg = <0x2000a000 0x100>;
|
||||
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_gates8 9>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio1@2003c000 {
|
||||
compatible = "rockchip,gpio-bank";
|
||||
reg = <0x2003c000 0x100>;
|
||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clk_gates8 10>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
};
|
||||
|
||||
@ -1,27 +0,0 @@
|
||||
Rockchip PWM controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "rockchip,<name>-pwm"
|
||||
"rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs
|
||||
"rockchip,rk3288-pwm": found on RK3288 SOC
|
||||
"rockchip,rv1108-pwm", "rockchip,rk3288-pwm": found on RV1108 SoC
|
||||
"rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
|
||||
- reg: physical base address and length of the controller's registers
|
||||
- clocks: See ../clock/clock-bindings.txt
|
||||
- For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399):
|
||||
- There is one clock that's used both to derive the functional clock
|
||||
for the device and as the bus clock.
|
||||
- For newer hardware (rk3328 and future socs): specified by name
|
||||
- "pwm": This is used to derive the functional clock.
|
||||
- "pclk": This is the APB bus clock.
|
||||
- #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.yaml in this directory
|
||||
for a description of the cell format.
|
||||
|
||||
Example:
|
||||
|
||||
pwm0: pwm@20030000 {
|
||||
compatible = "rockchip,rk2928-pwm";
|
||||
reg = <0x20030000 0x10>;
|
||||
clocks = <&cru PCLK_PWM01>;
|
||||
#pwm-cells = <2>;
|
||||
};
|
||||
100
Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
Normal file
100
Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
Normal file
@ -0,0 +1,100 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Rockchip PWM controller
|
||||
|
||||
maintainers:
|
||||
- Heiko Stuebner <heiko@sntech.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: rockchip,rk2928-pwm
|
||||
- const: rockchip,rk3288-pwm
|
||||
- const: rockchip,rk3328-pwm
|
||||
- const: rockchip,vop-pwm
|
||||
- items:
|
||||
- const: rockchip,rk3036-pwm
|
||||
- const: rockchip,rk2928-pwm
|
||||
- items:
|
||||
- enum:
|
||||
- rockchip,rk3368-pwm
|
||||
- rockchip,rk3399-pwm
|
||||
- rockchip,rv1108-pwm
|
||||
- const: rockchip,rk3288-pwm
|
||||
- items:
|
||||
- enum:
|
||||
- rockchip,px30-pwm
|
||||
- rockchip,rk3308-pwm
|
||||
- const: rockchip,rk3328-pwm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
clock-names:
|
||||
maxItems: 2
|
||||
|
||||
"#pwm-cells":
|
||||
enum: [2, 3]
|
||||
description:
|
||||
Must be 2 (rk2928) or 3 (rk3288 and later).
|
||||
See pwm.yaml for a description of the cell format.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#pwm-cells"
|
||||
|
||||
if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- rockchip,rk3328-pwm
|
||||
- rockchip,rv1108-pwm
|
||||
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: Used to derive the functional clock for the device.
|
||||
- description: Used as the APB bus clock.
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: pwm
|
||||
- const: pclk
|
||||
|
||||
required:
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
else:
|
||||
properties:
|
||||
clocks:
|
||||
maxItems: 1
|
||||
description:
|
||||
Used both to derive the functional clock
|
||||
for the device and as the bus clock.
|
||||
|
||||
required:
|
||||
- clocks
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/rk3188-cru-common.h>
|
||||
pwm0: pwm@20030000 {
|
||||
compatible = "rockchip,rk2928-pwm";
|
||||
reg = <0x20030000 0x10>;
|
||||
clocks = <&cru PCLK_PWM01>;
|
||||
#pwm-cells = <2>;
|
||||
};
|
||||
@ -0,0 +1,43 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Toshiba Visconti PWM Controller
|
||||
|
||||
maintainers:
|
||||
- Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: toshiba,visconti-pwm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
'#pwm-cells':
|
||||
const: 2
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- '#pwm-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
pwm: pwm@241c0000 {
|
||||
compatible = "toshiba,visconti-pwm";
|
||||
reg = <0 0x241c0000 0 0x1000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_mux>;
|
||||
#pwm-cells = <2>;
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,90 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: NXP i.MX Co-Processor Bindings
|
||||
|
||||
description:
|
||||
This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
|
||||
|
||||
maintainers:
|
||||
- Peng Fan <peng.fan@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx8mq-cm4
|
||||
- fsl,imx8mm-cm4
|
||||
- fsl,imx7d-cm4
|
||||
- fsl,imx6sx-cm4
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
syscon:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description:
|
||||
Phandle to syscon block which provide access to System Reset Controller
|
||||
|
||||
mbox-names:
|
||||
items:
|
||||
- const: tx
|
||||
- const: rx
|
||||
- const: rxdb
|
||||
|
||||
mboxes:
|
||||
description:
|
||||
This property is required only if the rpmsg/virtio functionality is used.
|
||||
List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
|
||||
(see mailbox/fsl,mu.yaml)
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
memory-region:
|
||||
description:
|
||||
If present, a phandle for a reserved memory area that used for vdev buffer,
|
||||
resource table, vring region and others used by remote processor.
|
||||
minItems: 1
|
||||
maxItems: 32
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- clocks
|
||||
- syscon
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx7d-clock.h>
|
||||
m4_reserved_sysmem1: cm4@80000000 {
|
||||
reg = <0x80000000 0x80000>;
|
||||
};
|
||||
|
||||
m4_reserved_sysmem2: cm4@81000000 {
|
||||
reg = <0x81000000 0x80000>;
|
||||
};
|
||||
|
||||
imx7d-cm4 {
|
||||
compatible = "fsl,imx7d-cm4";
|
||||
memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
|
||||
syscon = <&src>;
|
||||
clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
|
||||
};
|
||||
|
||||
- |
|
||||
#include <dt-bindings/clock/imx8mm-clock.h>
|
||||
|
||||
imx8mm-cm4 {
|
||||
compatible = "fsl,imx8mm-cm4";
|
||||
clocks = <&clk IMX8MM_CLK_M4_DIV>;
|
||||
mbox-names = "tx", "rx", "rxdb";
|
||||
mboxes = <&mu 0 1
|
||||
&mu 1 1
|
||||
&mu 3 1>;
|
||||
memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
|
||||
syscon = <&src>;
|
||||
};
|
||||
...
|
||||
@ -1,33 +0,0 @@
|
||||
NXP iMX6SX/iMX7D Co-Processor Bindings
|
||||
----------------------------------------
|
||||
|
||||
This binding provides support for ARM Cortex M4 Co-processor found on some
|
||||
NXP iMX SoCs.
|
||||
|
||||
Required properties:
|
||||
- compatible Should be one of:
|
||||
"fsl,imx7d-cm4"
|
||||
"fsl,imx6sx-cm4"
|
||||
- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
|
||||
- syscon Phandle to syscon block which provide access to
|
||||
System Reset Controller
|
||||
|
||||
Optional properties:
|
||||
- memory-region list of phandels to the reserved memory regions.
|
||||
(See: ../reserved-memory/reserved-memory.txt)
|
||||
|
||||
Example:
|
||||
m4_reserved_sysmem1: cm4@80000000 {
|
||||
reg = <0x80000000 0x80000>;
|
||||
};
|
||||
|
||||
m4_reserved_sysmem2: cm4@81000000 {
|
||||
reg = <0x81000000 0x80000>;
|
||||
};
|
||||
|
||||
imx7d-cm4 {
|
||||
compatible = "fsl,imx7d-cm4";
|
||||
memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
|
||||
syscon = <&src>;
|
||||
clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
|
||||
};
|
||||
@ -18,6 +18,7 @@ on the Qualcomm ADSP Hexagon core.
|
||||
"qcom,sc7180-mpss-pas"
|
||||
"qcom,sdm845-adsp-pas"
|
||||
"qcom,sdm845-cdsp-pas"
|
||||
"qcom,sdx55-mpss-pas"
|
||||
"qcom,sm8150-adsp-pas"
|
||||
"qcom,sm8150-cdsp-pas"
|
||||
"qcom,sm8150-mpss-pas"
|
||||
@ -61,6 +62,7 @@ on the Qualcomm ADSP Hexagon core.
|
||||
must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
||||
qcom,qcs404-wcss-pas:
|
||||
qcom,sc7180-mpss-pas:
|
||||
qcom,sdx55-mpss-pas:
|
||||
qcom,sm8150-mpss-pas:
|
||||
qcom,sm8350-mpss-pas:
|
||||
must be "wdog", "fatal", "ready", "handover", "stop-ack",
|
||||
@ -128,6 +130,8 @@ on the Qualcomm ADSP Hexagon core.
|
||||
qcom,sm8150-mpss-pas:
|
||||
qcom,sm8350-mpss-pas:
|
||||
must be "cx", "load_state", "mss"
|
||||
qcom,sdx55-mpss-pas:
|
||||
must be "cx", "mss"
|
||||
qcom,sm8250-adsp-pas:
|
||||
qcom,sm8350-adsp-pas:
|
||||
qcom,sm8150-slpi-pas:
|
||||
|
||||
@ -9,6 +9,7 @@ on the Qualcomm Hexagon core.
|
||||
Definition: must be one of:
|
||||
"qcom,q6v5-pil",
|
||||
"qcom,ipq8074-wcss-pil"
|
||||
"qcom,qcs404-wcss-pil"
|
||||
"qcom,msm8916-mss-pil",
|
||||
"qcom,msm8974-mss-pil"
|
||||
"qcom,msm8996-mss-pil"
|
||||
@ -39,6 +40,7 @@ on the Qualcomm Hexagon core.
|
||||
string:
|
||||
qcom,q6v5-pil:
|
||||
qcom,ipq8074-wcss-pil:
|
||||
qcom,qcs404-wcss-pil:
|
||||
qcom,msm8916-mss-pil:
|
||||
qcom,msm8974-mss-pil:
|
||||
must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
||||
@ -67,6 +69,11 @@ on the Qualcomm Hexagon core.
|
||||
Definition: The clocks needed depend on the compatible string:
|
||||
qcom,ipq8074-wcss-pil:
|
||||
no clock names required
|
||||
qcom,qcs404-wcss-pil:
|
||||
must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
|
||||
"gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
|
||||
"lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
|
||||
"lcc_axim_cbc", "lcc_bcr_sleep"
|
||||
qcom,q6v5-pil:
|
||||
qcom,msm8916-mss-pil:
|
||||
qcom,msm8974-mss-pil:
|
||||
@ -132,6 +139,14 @@ For the compatible string below the following supplies are required:
|
||||
Definition: reference to the regulators to be held on behalf of the
|
||||
booting of the Hexagon core
|
||||
|
||||
For the compatible string below the following supplies are required:
|
||||
"qcom,qcs404-wcss-pil"
|
||||
- cx-supply:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: reference to the regulators to be held on behalf of the
|
||||
booting of the Hexagon core
|
||||
|
||||
For the compatible string below the following supplies are required:
|
||||
"qcom,msm8996-mss-pil"
|
||||
- pll-supply:
|
||||
|
||||
@ -34,6 +34,12 @@ on the Qualcomm WCNSS core.
|
||||
Definition: should be "wdog", "fatal", optionally followed by "ready",
|
||||
"handover", "stop-ack"
|
||||
|
||||
- firmware-name:
|
||||
Usage: optional
|
||||
Value type: <string>
|
||||
Definition: must list the relative firmware image path for the
|
||||
WCNSS core. Defaults to "wcnss.mdt".
|
||||
|
||||
- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
|
||||
- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
|
||||
- vddpx-supply:
|
||||
|
||||
@ -65,16 +65,23 @@ properties:
|
||||
Unidirectional channel:
|
||||
- from local to remote, where ACK from the remote means that it is
|
||||
ready for shutdown
|
||||
- description: |
|
||||
A channel (d) used by the local proc to notify the remote proc that it
|
||||
has to stop interprocessor communnication.
|
||||
Unidirectional channel:
|
||||
- from local to remote, where ACK from the remote means that communnication
|
||||
as been stopped on the remote side.
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
maxItems: 4
|
||||
|
||||
mbox-names:
|
||||
items:
|
||||
- const: vq0
|
||||
- const: vq1
|
||||
- const: shutdown
|
||||
- const: detach
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
maxItems: 4
|
||||
|
||||
memory-region:
|
||||
description:
|
||||
|
||||
27
Documentation/devicetree/bindings/riscv/microchip.yaml
Normal file
27
Documentation/devicetree/bindings/riscv/microchip.yaml
Normal file
@ -0,0 +1,27 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/riscv/microchip.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip PolarFire SoC-based boards device tree bindings
|
||||
|
||||
maintainers:
|
||||
- Cyril Jean <Cyril.Jean@microchip.com>
|
||||
- Lewis Hanly <lewis.hanly@microchip.com>
|
||||
|
||||
description:
|
||||
Microchip PolarFire SoC-based boards
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
const: '/'
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- microchip,mpfs-icicle-kit
|
||||
- const: microchip,mpfs
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
...
|
||||
62
Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
Normal file
62
Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
Normal file
@ -0,0 +1,62 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm PM8xxx PMIC RTC device
|
||||
|
||||
maintainers:
|
||||
- Satya Priya <skakit@codeaurora.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,pm8058-rtc
|
||||
- qcom,pm8921-rtc
|
||||
- qcom,pm8941-rtc
|
||||
- qcom,pm8018-rtc
|
||||
- qcom,pmk8350-rtc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
allow-set-time:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description:
|
||||
Indicates that the setting of RTC time is allowed by the host CPU.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
spmi_bus: spmi@c440000 {
|
||||
reg = <0x0c440000 0x1100>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
pmicintc: pmic@0 {
|
||||
reg = <0x0 SPMI_USID>;
|
||||
compatible = "qcom,pm8921";
|
||||
interrupts = <104 8>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8921_rtc: rtc@11d {
|
||||
compatible = "qcom,pm8921-rtc";
|
||||
reg = <0x11d>;
|
||||
interrupts = <0x27 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
@ -99,11 +99,6 @@ properties:
|
||||
- mediatek,mt7622-btif
|
||||
- mediatek,mt7623-btif
|
||||
- const: mediatek,mtk-btif
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt7622-btif
|
||||
- mediatek,mt7623-btif
|
||||
- const: mediatek,mtk-btif
|
||||
- items:
|
||||
- const: mrvl,mmp-uart
|
||||
- const: intel,xscale-uart
|
||||
|
||||
@ -1,37 +0,0 @@
|
||||
* Broadcom Northstar Thermal
|
||||
|
||||
This binding describes thermal sensor that is part of Northstar's DMU (Device
|
||||
Management Unit).
|
||||
|
||||
Required properties:
|
||||
- compatible : Must be "brcm,ns-thermal"
|
||||
- reg : iomem address range of PVTMON registers
|
||||
- #thermal-sensor-cells : Should be <0>
|
||||
|
||||
Example:
|
||||
|
||||
thermal: thermal@1800c2c0 {
|
||||
compatible = "brcm,ns-thermal";
|
||||
reg = <0x1800c2c0 0x10>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu_thermal: cpu-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
coefficients = <(-556) 418000>;
|
||||
thermal-sensors = <&thermal>;
|
||||
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <125000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,60 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Broadcom Northstar Thermal
|
||||
|
||||
maintainers:
|
||||
- Rafał Miłecki <rafal@milecki.pl>
|
||||
|
||||
description:
|
||||
Thermal sensor that is part of Northstar's DMU (Device Management Unit).
|
||||
|
||||
allOf:
|
||||
- $ref: thermal-sensor.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: brcm,ns-thermal
|
||||
|
||||
reg:
|
||||
description: PVTMON registers range
|
||||
maxItems: 1
|
||||
|
||||
"#thermal-sensor-cells":
|
||||
const: 0
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
examples:
|
||||
- |
|
||||
thermal: thermal@1800c2c0 {
|
||||
compatible = "brcm,ns-thermal";
|
||||
reg = <0x1800c2c0 0x10>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <1000>;
|
||||
coefficients = <(-556) 418000>;
|
||||
thermal-sensors = <&thermal>;
|
||||
|
||||
trips {
|
||||
cpu-crit {
|
||||
temperature = <125000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -19,9 +19,15 @@ description: |
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- description: msm9860 TSENS based
|
||||
items:
|
||||
- enum:
|
||||
- qcom,ipq8064-tsens
|
||||
|
||||
- description: v0.1 of TSENS
|
||||
items:
|
||||
- enum:
|
||||
- qcom,mdm9607-tsens
|
||||
- qcom,msm8916-tsens
|
||||
- qcom,msm8939-tsens
|
||||
- qcom,msm8974-tsens
|
||||
@ -43,6 +49,7 @@ properties:
|
||||
- qcom,sdm845-tsens
|
||||
- qcom,sm8150-tsens
|
||||
- qcom,sm8250-tsens
|
||||
- qcom,sm8350-tsens
|
||||
- const: qcom,tsens-v2
|
||||
|
||||
reg:
|
||||
@ -73,7 +80,9 @@ properties:
|
||||
maxItems: 2
|
||||
items:
|
||||
- const: calib
|
||||
- const: calib_sel
|
||||
- enum:
|
||||
- calib_backup
|
||||
- calib_sel
|
||||
|
||||
"#qcom,sensors":
|
||||
description:
|
||||
@ -88,12 +97,21 @@ properties:
|
||||
Number of cells required to uniquely identify the thermal sensors. Since
|
||||
we have multiple sensors this is set to 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- "#thermal-sensor-cells"
|
||||
- "#qcom,sensors"
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,ipq8064-tsens
|
||||
- qcom,mdm9607-tsens
|
||||
- qcom,msm8916-tsens
|
||||
- qcom,msm8974-tsens
|
||||
- qcom,msm8976-tsens
|
||||
@ -114,17 +132,42 @@ allOf:
|
||||
interrupt-names:
|
||||
minItems: 2
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,tsens-v0_1
|
||||
- qcom,tsens-v1
|
||||
- qcom,tsens-v2
|
||||
|
||||
then:
|
||||
required:
|
||||
- reg
|
||||
- "#qcom,sensors"
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- "#thermal-sensor-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
// Example msm9860 based SoC (ipq8064):
|
||||
gcc: clock-controller {
|
||||
|
||||
/* ... */
|
||||
|
||||
tsens: thermal-sensor {
|
||||
compatible = "qcom,ipq8064-tsens";
|
||||
|
||||
nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
|
||||
nvmem-cell-names = "calib", "calib_backup";
|
||||
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "uplow";
|
||||
|
||||
#qcom,sensors = <11>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
// Example 1 (legacy: for pre v1 IP):
|
||||
|
||||
@ -28,14 +28,7 @@ properties:
|
||||
- renesas,r8a77980-thermal # R-Car V3H
|
||||
- renesas,r8a779a0-thermal # R-Car V3U
|
||||
|
||||
reg:
|
||||
minItems: 2
|
||||
maxItems: 4
|
||||
items:
|
||||
- description: TSC1 registers
|
||||
- description: TSC2 registers
|
||||
- description: TSC3 registers
|
||||
- description: TSC4 registers
|
||||
reg: true
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
@ -71,8 +64,25 @@ if:
|
||||
enum:
|
||||
- renesas,r8a779a0-thermal
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
minItems: 2
|
||||
maxItems: 3
|
||||
items:
|
||||
- description: TSC1 registers
|
||||
- description: TSC2 registers
|
||||
- description: TSC3 registers
|
||||
required:
|
||||
- interrupts
|
||||
else:
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
- description: TSC0 registers
|
||||
- description: TSC1 registers
|
||||
- description: TSC2 registers
|
||||
- description: TSC3 registers
|
||||
- description: TSC4 registers
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
@ -111,3 +121,20 @@ examples:
|
||||
};
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/power/r8a779a0-sysc.h>
|
||||
|
||||
tsc_r8a779a0: thermal@e6190000 {
|
||||
compatible = "renesas,r8a779a0-thermal";
|
||||
reg = <0xe6190000 0x200>,
|
||||
<0xe6198000 0x200>,
|
||||
<0xe61a0000 0x200>,
|
||||
<0xe61a8000 0x200>,
|
||||
<0xe61b0000 0x200>;
|
||||
clocks = <&cpg CPG_MOD 919>;
|
||||
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 919>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
@ -36,6 +36,9 @@ properties:
|
||||
containing several internal sensors.
|
||||
enum: [0, 1]
|
||||
|
||||
required:
|
||||
- "#thermal-sensor-cells"
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
examples:
|
||||
|
||||
@ -495,6 +495,8 @@ patternProperties:
|
||||
description: Shenzhen Hugsun Technology Co. Ltd.
|
||||
"^hwacom,.*":
|
||||
description: HwaCom Systems Inc.
|
||||
"^hycon,.*":
|
||||
description: Hycon Technology Corp.
|
||||
"^hydis,.*":
|
||||
description: Hydis Technologies
|
||||
"^hyundai,.*":
|
||||
|
||||
@ -12,7 +12,7 @@ Guidelines for GPIOs consumers
|
||||
|
||||
Drivers that can't work without standard GPIO calls should have Kconfig entries
|
||||
that depend on GPIOLIB or select GPIOLIB. The functions that allow a driver to
|
||||
obtain and use GPIOs are available by including the following file:
|
||||
obtain and use GPIOs are available by including the following file::
|
||||
|
||||
#include <linux/gpio/consumer.h>
|
||||
|
||||
|
||||
@ -96,6 +96,12 @@ hardware descriptions such as device tree or ACPI:
|
||||
way to pass the charging parameters from hardware descriptions such as the
|
||||
device tree.
|
||||
|
||||
- gpio-mux: drivers/mux/gpio.c is used for controlling a multiplexer using
|
||||
n GPIO lines such that you can mux in 2^n different devices by activating
|
||||
different GPIO lines. Often the GPIOs are on a SoC and the devices are
|
||||
some SoC-external entities, such as different components on a PCB that
|
||||
can be selectively enabled.
|
||||
|
||||
Apart from this there are special GPIO drivers in subsystems like MMC/SD to
|
||||
read card detect and write protect GPIO lines, and in the TTY serial subsystem
|
||||
to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The
|
||||
|
||||
@ -55,7 +55,11 @@ several parameter at once. For example, if you see pwm_config() and
|
||||
pwm_{enable,disable}() calls in the same function, this probably means you
|
||||
should switch to pwm_apply_state().
|
||||
|
||||
The PWM user API also allows one to query the PWM state with pwm_get_state().
|
||||
The PWM user API also allows one to query the PWM state that was passed to the
|
||||
last invocation of pwm_apply_state() using pwm_get_state(). Note this is
|
||||
different to what the driver has actually implemented if the request cannot be
|
||||
satisfied exactly with the hardware in use. There is currently no way for
|
||||
consumers to get the actually implemented settings.
|
||||
|
||||
In addition to the PWM state, the PWM API also exposes PWM arguments, which
|
||||
are the reference PWM config one should use on this PWM.
|
||||
|
||||
@ -730,17 +730,7 @@ This function returns the thermal_instance corresponding to a given
|
||||
{thermal_zone, cooling_device, trip_point} combination. Returns NULL
|
||||
if such an instance does not exist.
|
||||
|
||||
4.3. thermal_notify_framework
|
||||
-----------------------------
|
||||
|
||||
This function handles the trip events from sensor drivers. It starts
|
||||
throttling the cooling devices according to the policy configured.
|
||||
For CRITICAL and HOT trip points, this notifies the respective drivers,
|
||||
and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
|
||||
The throttling policy is based on the configured platform data; if no
|
||||
platform data is provided, this uses the step_wise throttling policy.
|
||||
|
||||
4.4. thermal_cdev_update
|
||||
4.3. thermal_cdev_update
|
||||
------------------------
|
||||
|
||||
This function serves as an arbitrator to set the state of a cooling
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
VFIO - "Virtual Function I/O" [1]_
|
||||
==================================
|
||||
|
||||
Many modern system now provide DMA and interrupt remapping facilities
|
||||
Many modern systems now provide DMA and interrupt remapping facilities
|
||||
to help ensure I/O devices behave within the boundaries they've been
|
||||
allotted. This includes x86 hardware with AMD-Vi and Intel VT-d,
|
||||
POWER systems with Partitionable Endpoints (PEs) and embedded PowerPC
|
||||
|
||||
@ -110,6 +110,12 @@ background_gc=%s Turn on/off cleaning operations, namely garbage
|
||||
on synchronous garbage collection running in background.
|
||||
Default value for this option is on. So garbage
|
||||
collection is on by default.
|
||||
gc_merge When background_gc is on, this option can be enabled to
|
||||
let background GC thread to handle foreground GC requests,
|
||||
it can eliminate the sluggish issue caused by slow foreground
|
||||
GC operation when GC is triggered from a process with limited
|
||||
I/O and CPU resources.
|
||||
nogc_merge Disable GC merge feature.
|
||||
disable_roll_forward Disable the roll-forward recovery routine
|
||||
norecovery Disable the roll-forward recovery routine, mounted read-
|
||||
only (i.e., -o ro,disable_roll_forward)
|
||||
@ -813,6 +819,14 @@ Compression implementation
|
||||
* chattr +c file
|
||||
* chattr +c dir; touch dir/file
|
||||
* mount w/ -o compress_extension=ext; touch file.ext
|
||||
* mount w/ -o compress_extension=*; touch any_file
|
||||
|
||||
- At this point, compression feature doesn't expose compressed space to user
|
||||
directly in order to guarantee potential data updates later to the space.
|
||||
Instead, the main goal is to reduce data writes to flash disk as much as
|
||||
possible, resulting in extending disk life time as well as relaxing IO
|
||||
congestion. Alternatively, we've added ioctl interface to reclaim compressed
|
||||
space and show it to user after putting the immutable bit.
|
||||
|
||||
Compress metadata layout::
|
||||
|
||||
|
||||
@ -99,6 +99,12 @@ native::
|
||||
}
|
||||
}
|
||||
|
||||
Note, that historically ACPI has no means of the GPIO polarity and thus
|
||||
the SPISerialBus() resource defines it on the per-chip basis. In order
|
||||
to avoid a chain of negations, the GPIO polarity is considered being
|
||||
Active High. Even for the cases when _DSD() is involved (see the example
|
||||
above) the GPIO CS polarity must be defined Active High to avoid ambiguity.
|
||||
|
||||
Other supported properties
|
||||
==========================
|
||||
|
||||
|
||||
@ -107,13 +107,17 @@ example below:
|
||||
},
|
||||
};
|
||||
|
||||
static const struct property_entry rotary_encoder_properties[] __initconst = {
|
||||
static const struct property_entry rotary_encoder_properties[] = {
|
||||
PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
|
||||
PROPERTY_ENTRY_U32("linux,axis", ABS_X),
|
||||
PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 0),
|
||||
{ },
|
||||
};
|
||||
|
||||
static const struct software_node rotary_encoder_node = {
|
||||
.properties = rotary_encoder_properties,
|
||||
};
|
||||
|
||||
static struct platform_device rotary_encoder_device = {
|
||||
.name = "rotary-encoder",
|
||||
.id = 0,
|
||||
@ -122,7 +126,7 @@ example below:
|
||||
...
|
||||
|
||||
gpiod_add_lookup_table(&rotary_encoder_gpios);
|
||||
device_add_properties(&rotary_encoder_device, rotary_encoder_properties);
|
||||
device_add_software_node(&rotary_encoder_device.dev, &rotary_encoder_node);
|
||||
platform_device_register(&rotary_encoder_device);
|
||||
|
||||
...
|
||||
|
||||
@ -71,7 +71,7 @@ The possible values of ``type`` are::
|
||||
#define JS_EVENT_INIT 0x80 /* initial state of device */
|
||||
|
||||
As mentioned above, the driver will issue synthetic JS_EVENT_INIT ORed
|
||||
events on open. That is, if it's issuing a INIT BUTTON event, the
|
||||
events on open. That is, if it's issuing an INIT BUTTON event, the
|
||||
current type value will be::
|
||||
|
||||
int type = JS_EVENT_BUTTON | JS_EVENT_INIT; /* 0x81 */
|
||||
@ -100,8 +100,8 @@ is, you have both an axis 0 and a button 0). Generally,
|
||||
=============== =======
|
||||
|
||||
Hats vary from one joystick type to another. Some can be moved in 8
|
||||
directions, some only in 4, The driver, however, always reports a hat as two
|
||||
independent axis, even if the hardware doesn't allow independent movement.
|
||||
directions, some only in 4. The driver, however, always reports a hat as two
|
||||
independent axes, even if the hardware doesn't allow independent movement.
|
||||
|
||||
|
||||
js_event.value
|
||||
@ -188,10 +188,10 @@ One reason for emptying the queue is that if it gets full you'll start
|
||||
missing events since the queue is finite, and older events will get
|
||||
overwritten.
|
||||
|
||||
The other reason is that you want to know all what happened, and not
|
||||
The other reason is that you want to know all that happened, and not
|
||||
delay the processing till later.
|
||||
|
||||
Why can get the queue full? Because you don't empty the queue as
|
||||
Why can the queue get full? Because you don't empty the queue as
|
||||
mentioned, or because too much time elapses from one read to another
|
||||
and too many events to store in the queue get generated. Note that
|
||||
high system load may contribute to space those reads even more.
|
||||
@ -277,7 +277,7 @@ to be in the stable part of the API, and therefore may change without
|
||||
warning in following releases of the driver.
|
||||
|
||||
Both JSIOCSCORR and JSIOCGCORR expect &js_corr to be able to hold
|
||||
information for all axis. That is, struct js_corr corr[MAX_AXIS];
|
||||
information for all axes. That is, struct js_corr corr[MAX_AXIS];
|
||||
|
||||
struct js_corr is defined as::
|
||||
|
||||
@ -328,7 +328,7 @@ To test the state of the buttons,
|
||||
second_button_state = js.buttons & 2;
|
||||
|
||||
The axis values do not have a defined range in the original 0.x driver,
|
||||
except for that the values are non-negative. The 1.2.8+ drivers use a
|
||||
except that the values are non-negative. The 1.2.8+ drivers use a
|
||||
fixed range for reporting the values, 1 being the minimum, 128 the
|
||||
center, and 255 maximum value.
|
||||
|
||||
|
||||
@ -133,15 +133,15 @@ And add a line to your rc script executing that file::
|
||||
This way, after the next reboot your joystick will remain calibrated. You
|
||||
can also add the ``jscal -p`` line to your shutdown script.
|
||||
|
||||
HW specific driver information
|
||||
==============================
|
||||
Hardware-specific driver information
|
||||
====================================
|
||||
|
||||
In this section each of the separate hardware specific drivers is described.
|
||||
|
||||
Analog joysticks
|
||||
----------------
|
||||
|
||||
The analog.c uses the standard analog inputs of the gameport, and thus
|
||||
The analog.c driver uses the standard analog inputs of the gameport, and thus
|
||||
supports all standard joysticks and gamepads. It uses a very advanced
|
||||
routine for this, allowing for data precision that can't be found on any
|
||||
other system.
|
||||
@ -266,7 +266,7 @@ to:
|
||||
* Logitech WingMan Extreme Digital 3D
|
||||
|
||||
ADI devices are autodetected, and the driver supports up to two (any
|
||||
combination of) devices on a single gameport, using an Y-cable or chained
|
||||
combination of) devices on a single gameport, using a Y-cable or chained
|
||||
together.
|
||||
|
||||
Logitech WingMan Joystick, Logitech WingMan Attack, Logitech WingMan
|
||||
@ -288,7 +288,7 @@ supports:
|
||||
* Gravis Xterminator DualControl
|
||||
|
||||
All these devices are autodetected, and you can even use any combination
|
||||
of up to two of these pads either chained together or using an Y-cable on a
|
||||
of up to two of these pads either chained together or using a Y-cable on a
|
||||
single gameport.
|
||||
|
||||
GrIP MultiPort isn't supported yet. Gravis Stinger is a serial device and is
|
||||
@ -311,7 +311,7 @@ allow connecting analog joysticks to them, you'll need to load the analog
|
||||
driver as well to handle the attached joysticks.
|
||||
|
||||
The trackball should work with USB mousedev module as a normal mouse. See
|
||||
the USB documentation for how to setup an USB mouse.
|
||||
the USB documentation for how to setup a USB mouse.
|
||||
|
||||
ThrustMaster DirectConnect (BSP)
|
||||
--------------------------------
|
||||
@ -332,7 +332,7 @@ If you have one of these, contact me.
|
||||
|
||||
TMDC devices are autodetected, and thus no parameters to the module
|
||||
are needed. Up to two TMDC devices can be connected to one gameport, using
|
||||
an Y-cable.
|
||||
a Y-cable.
|
||||
|
||||
Creative Labs Blaster
|
||||
---------------------
|
||||
@ -342,7 +342,7 @@ the:
|
||||
|
||||
* Creative Blaster GamePad Cobra
|
||||
|
||||
Up to two of these can be used on a single gameport, using an Y-cable.
|
||||
Up to two of these can be used on a single gameport, using a Y-cable.
|
||||
|
||||
Genius Digital joysticks
|
||||
------------------------
|
||||
@ -381,7 +381,7 @@ card, 16 in case you have two in your system.
|
||||
Trident 4DWave / Aureal Vortex
|
||||
------------------------------
|
||||
|
||||
Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipsets
|
||||
Soundcards with a Trident 4DWave DX/NX or Aureal Vortex/Vortex2 chipset
|
||||
provide an "Enhanced Game Port" mode where the soundcard handles polling the
|
||||
joystick. This mode is supported by the pcigame.c module. Once loaded the
|
||||
analog driver can use the enhanced features of these gameports..
|
||||
@ -454,7 +454,7 @@ Devices currently supported by spaceball.c are:
|
||||
* SpaceTec SpaceBall 4000 FLX
|
||||
|
||||
In addition to having the spaceorb/spaceball and serport modules in the
|
||||
kernel, you also need to attach a serial port to it. to do that, run the
|
||||
kernel, you also need to attach a serial port to it. To do that, run the
|
||||
inputattach program::
|
||||
|
||||
inputattach --spaceorb /dev/tts/x &
|
||||
@ -466,7 +466,7 @@ or::
|
||||
where /dev/tts/x is the serial port which the device is connected to. After
|
||||
doing this, the device will be reported and will start working.
|
||||
|
||||
There is one caveat with the SpaceOrb. The button #6, the on the bottom
|
||||
There is one caveat with the SpaceOrb. The button #6, the one on the bottom
|
||||
side of the orb, although reported as an ordinary button, causes internal
|
||||
recentering of the spaceorb, moving the zero point to the position in which
|
||||
the ball is at the moment of pressing the button. So, think first before
|
||||
@ -500,7 +500,7 @@ joy-magellan module. It currently supports only the:
|
||||
* Magellan 3D
|
||||
* Space Mouse
|
||||
|
||||
models, the additional buttons on the 'Plus' versions are not supported yet.
|
||||
models; the additional buttons on the 'Plus' versions are not supported yet.
|
||||
|
||||
To use it, you need to attach the serial port to the driver using the::
|
||||
|
||||
@ -575,7 +575,7 @@ FAQ
|
||||
:A: The device files don't exist. Create them (see section 2.2).
|
||||
|
||||
:Q: Is it possible to connect my old Atari/Commodore/Amiga/console joystick
|
||||
or pad that uses a 9-pin D-type cannon connector to the serial port of my
|
||||
or pad that uses a 9-pin D-type Cannon connector to the serial port of my
|
||||
PC?
|
||||
:A: Yes, it is possible, but it'll burn your serial port or the pad. It
|
||||
won't work, of course.
|
||||
|
||||
@ -48,7 +48,6 @@ quota-tools 3.09 quota -V
|
||||
PPP 2.4.0 pppd --version
|
||||
nfs-utils 1.0.5 showmount --version
|
||||
procps 3.2.0 ps --version
|
||||
oprofile 0.9 oprofiled --version
|
||||
udev 081 udevd --version
|
||||
grub 0.93 grub --version || grub-install --version
|
||||
mcelog 0.6 mcelog --version
|
||||
|
||||
@ -6,6 +6,7 @@ RISC-V architecture
|
||||
:maxdepth: 1
|
||||
|
||||
boot-image-header
|
||||
vm-layout
|
||||
pmu
|
||||
patch-acceptance
|
||||
|
||||
|
||||
63
Documentation/riscv/vm-layout.rst
Normal file
63
Documentation/riscv/vm-layout.rst
Normal file
@ -0,0 +1,63 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
=====================================
|
||||
Virtual Memory Layout on RISC-V Linux
|
||||
=====================================
|
||||
|
||||
:Author: Alexandre Ghiti <alex@ghiti.fr>
|
||||
:Date: 12 February 2021
|
||||
|
||||
This document describes the virtual memory layout used by the RISC-V Linux
|
||||
Kernel.
|
||||
|
||||
RISC-V Linux Kernel 32bit
|
||||
=========================
|
||||
|
||||
RISC-V Linux Kernel SV32
|
||||
------------------------
|
||||
|
||||
TODO
|
||||
|
||||
RISC-V Linux Kernel 64bit
|
||||
=========================
|
||||
|
||||
The RISC-V privileged architecture document states that the 64bit addresses
|
||||
"must have bits 63–48 all equal to bit 47, or else a page-fault exception will
|
||||
occur.": that splits the virtual address space into 2 halves separated by a very
|
||||
big hole, the lower half is where the userspace resides, the upper half is where
|
||||
the RISC-V Linux Kernel resides.
|
||||
|
||||
RISC-V Linux Kernel SV39
|
||||
------------------------
|
||||
|
||||
::
|
||||
|
||||
========================================================================================================================
|
||||
Start addr | Offset | End addr | Size | VM area description
|
||||
========================================================================================================================
|
||||
| | | |
|
||||
0000000000000000 | 0 | 0000003fffffffff | 256 GB | user-space virtual memory, different per mm
|
||||
__________________|____________|__________________|_________|___________________________________________________________
|
||||
| | | |
|
||||
0000004000000000 | +256 GB | ffffffbfffffffff | ~16M TB | ... huge, almost 64 bits wide hole of non-canonical
|
||||
| | | | virtual memory addresses up to the -256 GB
|
||||
| | | | starting offset of kernel mappings.
|
||||
__________________|____________|__________________|_________|___________________________________________________________
|
||||
|
|
||||
| Kernel-space virtual memory, shared between all processes:
|
||||
____________________________________________________________|___________________________________________________________
|
||||
| | | |
|
||||
ffffffc000000000 | -256 GB | ffffffc7ffffffff | 32 GB | kasan
|
||||
ffffffcefee00000 | -196 GB | ffffffcefeffffff | 2 MB | fixmap
|
||||
ffffffceff000000 | -196 GB | ffffffceffffffff | 16 MB | PCI io
|
||||
ffffffcf00000000 | -196 GB | ffffffcfffffffff | 4 GB | vmemmap
|
||||
ffffffd000000000 | -192 GB | ffffffdfffffffff | 64 GB | vmalloc/ioremap space
|
||||
ffffffe000000000 | -128 GB | ffffffff7fffffff | 124 GB | direct mapping of all physical memory
|
||||
__________________|____________|__________________|_________|____________________________________________________________
|
||||
|
|
||||
|
|
||||
____________________________________________________________|____________________________________________________________
|
||||
| | | |
|
||||
ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | modules
|
||||
ffffffff80000000 | -2 GB | ffffffffffffffff | 2 GB | kernel, BPF
|
||||
__________________|____________|__________________|_________|____________________________________________________________
|
||||
@ -51,7 +51,6 @@ quota-tools 3.09 quota -V
|
||||
PPP 2.4.0 pppd --version
|
||||
nfs-utils 1.0.5 showmount --version
|
||||
procps 3.2.0 ps --version
|
||||
oprofile 0.9 oprofiled --version
|
||||
udev 081 udevd --version
|
||||
grub 0.93 grub --version || grub-install --version
|
||||
mcelog 0.6 mcelog --version
|
||||
|
||||
@ -1,36 +1,184 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
.. raw:: latex
|
||||
|
||||
\renewcommand\thesection*
|
||||
\renewcommand\thesubsection*
|
||||
|
||||
.. _linux_doc_zh:
|
||||
|
||||
中文翻译
|
||||
========
|
||||
|
||||
这些手册包含有关如何开发内核的整体信息。内核社区非常庞大，一年下来有数千名开发
|
||||
人员做出贡献。 与任何大型社区一样，知道如何完成任务将使得更改合并的过程变得更
|
||||
加容易。
|
||||
|
||||
翻译计划:
|
||||
内核中文文档欢迎任何翻译投稿，特别是关于内核用户和管理员指南部分。
|
||||
.. note::
|
||||
|
||||
**翻译计划:**
|
||||
内核中文文档欢迎任何翻译投稿，特别是关于内核用户和管理员指南部分。
|
||||
|
||||
许可证文档
|
||||
----------
|
||||
|
||||
下面的文档介绍了Linux内核源代码的许可证（GPLv2）、如何在源代码树中正确标记
|
||||
单个文件的许可证、以及指向完整许可证文本的链接。
|
||||
|
||||
* Documentation/translations/zh_CN/process/license-rules.rst
|
||||
|
||||
用户文档
|
||||
--------
|
||||
|
||||
下面的手册是为内核用户编写的——即那些试图让它在给定系统上以最佳方式工作的
|
||||
用户。
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
admin-guide/index
|
||||
|
||||
TODOList:
|
||||
|
||||
* kbuild/index
|
||||
|
||||
固件相关文档
|
||||
------------
|
||||
|
||||
下列文档描述了内核需要的平台固件相关信息。
|
||||
|
||||
TODOList:
|
||||
|
||||
* firmware-guide/index
|
||||
* devicetree/index
|
||||
|
||||
应用程序开发人员文档
|
||||
--------------------
|
||||
|
||||
用户空间API手册涵盖了描述应用程序开发人员可见内核接口方面的文档。
|
||||
|
||||
TODOlist:
|
||||
|
||||
* userspace-api/index
|
||||
|
||||
内核开发简介
|
||||
------------
|
||||
|
||||
这些手册包含有关如何开发内核的整体信息。内核社区非常庞大，一年下来有数千名
|
||||
开发人员做出贡献。与任何大型社区一样，知道如何完成任务将使得更改合并的过程
|
||||
变得更加容易。
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
process/index
|
||||
dev-tools/index
|
||||
doc-guide/index
|
||||
kernel-hacking/index
|
||||
filesystems/index
|
||||
arm64/index
|
||||
sound/index
|
||||
cpu-freq/index
|
||||
mips/index
|
||||
iio/index
|
||||
riscv/index
|
||||
|
||||
TODOList:
|
||||
|
||||
* trace/index
|
||||
* maintainer/index
|
||||
* fault-injection/index
|
||||
* livepatch/index
|
||||
* rust/index
|
||||
|
||||
内核API文档
|
||||
-----------
|
||||
|
||||
以下手册从内核开发人员的角度详细介绍了特定的内核子系统是如何工作的。这里的
|
||||
大部分信息都是直接从内核源代码获取的，并根据需要添加补充材料（或者至少是在
|
||||
我们设法添加的时候——可能不是所有的都是有需要的）。
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
core-api/index
|
||||
cpu-freq/index
|
||||
iio/index
|
||||
sound/index
|
||||
filesystems/index
|
||||
|
||||
TODOList:
|
||||
|
||||
* driver-api/index
|
||||
* locking/index
|
||||
* accounting/index
|
||||
* block/index
|
||||
* cdrom/index
|
||||
* ide/index
|
||||
* fb/index
|
||||
* fpga/index
|
||||
* hid/index
|
||||
* i2c/index
|
||||
* isdn/index
|
||||
* infiniband/index
|
||||
* leds/index
|
||||
* netlabel/index
|
||||
* networking/index
|
||||
* pcmcia/index
|
||||
* power/index
|
||||
* target/index
|
||||
* timers/index
|
||||
* spi/index
|
||||
* w1/index
|
||||
* watchdog/index
|
||||
* virt/index
|
||||
* input/index
|
||||
* hwmon/index
|
||||
* gpu/index
|
||||
* security/index
|
||||
* crypto/index
|
||||
* vm/index
|
||||
* bpf/index
|
||||
* usb/index
|
||||
* PCI/index
|
||||
* scsi/index
|
||||
* misc-devices/index
|
||||
* scheduler/index
|
||||
* mhi/index
|
||||
|
||||
体系结构无关文档
|
||||
----------------
|
||||
|
||||
TODOList:
|
||||
|
||||
* asm-annotations
|
||||
|
||||
特定体系结构文档
|
||||
----------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 2
|
||||
|
||||
mips/index
|
||||
arm64/index
|
||||
riscv/index
|
||||
openrisc/index
|
||||
|
||||
TODOList:
|
||||
|
||||
* arm/index
|
||||
* ia64/index
|
||||
* m68k/index
|
||||
* nios2/index
|
||||
* parisc/index
|
||||
* powerpc/index
|
||||
* s390/index
|
||||
* sh/index
|
||||
* sparc/index
|
||||
* x86/index
|
||||
* xtensa/index
|
||||
|
||||
其他文档
|
||||
--------
|
||||
|
||||
有几份未排序的文档似乎不适合放在文档的其他部分，或者可能需要进行一些调整和/或
|
||||
转换为reStructureText格式，也有可能太旧。
|
||||
|
||||
TODOList:
|
||||
|
||||
* staging/index
|
||||
* watch_queue
|
||||
|
||||
目录和表格
|
||||
----------
|
||||
|
||||
|
||||
@ -6,9 +6,9 @@
|
||||
|
||||
Overview
|
||||
========
|
||||
Original x86-64 was limited by 4-level paing to 256 TiB of virtual address
|
||||
Original x86-64 was limited by 4-level paging to 256 TiB of virtual address
|
||||
space and 64 TiB of physical address space. We are already bumping into
|
||||
this limit: some vendors offers servers with 64 TiB of memory today.
|
||||
this limit: some vendors offer servers with 64 TiB of memory today.
|
||||
|
||||
To overcome the limitation upcoming hardware will introduce support for
|
||||
5-level paging. It is a straight-forward extension of the current page
|
||||
|
||||
43
MAINTAINERS
43
MAINTAINERS
@ -3207,6 +3207,22 @@ F: Documentation/filesystems/bfs.rst
|
||||
F: fs/bfs/
|
||||
F: include/uapi/linux/bfs_fs.h
|
||||
|
||||
BITMAP API
|
||||
M: Yury Norov <yury.norov@gmail.com>
|
||||
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
||||
R: Rasmus Villemoes <linux@rasmusvillemoes.dk>
|
||||
S: Maintained
|
||||
F: include/asm-generic/bitops/find.h
|
||||
F: include/linux/bitmap.h
|
||||
F: lib/bitmap.c
|
||||
F: lib/find_bit.c
|
||||
F: lib/find_bit_benchmark.c
|
||||
F: lib/test_bitmap.c
|
||||
F: tools/include/asm-generic/bitops/find.h
|
||||
F: tools/include/linux/bitmap.h
|
||||
F: tools/lib/bitmap.c
|
||||
F: tools/lib/find_bit.c
|
||||
|
||||
BLINKM RGB LED DRIVER
|
||||
M: Jan-Simon Moeller <jansimon.moeller@gmx.de>
|
||||
S: Maintained
|
||||
@ -8388,6 +8404,13 @@ S: Maintained
|
||||
F: mm/hwpoison-inject.c
|
||||
F: mm/memory-failure.c
|
||||
|
||||
HYCON HY46XX TOUCHSCREEN SUPPORT
|
||||
M: Giulio Benetti <giulio.benetti@benettiengineering.com>
|
||||
L: linux-input@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
|
||||
F: drivers/input/touchscreen/hycon-hy46xx.c
|
||||
|
||||
HYGON PROCESSOR SUPPORT
|
||||
M: Pu Wen <puwen@hygon.cn>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
@ -9529,6 +9552,7 @@ F: fs/io-wq.h
|
||||
F: fs/io_uring.c
|
||||
F: include/linux/io_uring.h
|
||||
F: include/uapi/linux/io_uring.h
|
||||
F: tools/io_uring/
|
||||
|
||||
IPMI SUBSYSTEM
|
||||
M: Corey Minyard <minyard@acm.org>
|
||||
@ -10170,6 +10194,12 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
|
||||
F: drivers/video/backlight/ktd253-backlight.c
|
||||
|
||||
KTEST
|
||||
M: Steven Rostedt <rostedt@goodmis.org>
|
||||
M: John Hawley <warthog9@eaglescrag.net>
|
||||
S: Maintained
|
||||
F: tools/testing/ktest
|
||||
|
||||
L3MDEV
|
||||
M: David Ahern <dsahern@kernel.org>
|
||||
L: netdev@vger.kernel.org
|
||||
@ -13977,6 +14007,14 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
|
||||
F: drivers/pci/controller/dwc/*imx6*
|
||||
|
||||
PCI DRIVER FOR FU740
|
||||
M: Paul Walmsley <paul.walmsley@sifive.com>
|
||||
M: Greentime Hu <greentime.hu@sifive.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
|
||||
F: drivers/pci/controller/dwc/pcie-fu740.c
|
||||
|
||||
PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
|
||||
M: Jonathan Derrick <jonathan.derrick@intel.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
@ -14184,7 +14222,6 @@ PCIE DRIVER FOR HISILICON
|
||||
M: Zhou Wang <wangzhou1@hisilicon.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
|
||||
F: drivers/pci/controller/dwc/pcie-hisi.c
|
||||
|
||||
PCIE DRIVER FOR HISILICON KIRIN
|
||||
@ -14204,6 +14241,7 @@ F: drivers/pci/controller/dwc/pcie-histb.c
|
||||
|
||||
PCIE DRIVER FOR MEDIATEK
|
||||
M: Ryder Lee <ryder.lee@mediatek.com>
|
||||
M: Jianjun Wang <jianjun.wang@mediatek.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-mediatek@lists.infradead.org
|
||||
S: Supported
|
||||
@ -15191,6 +15229,7 @@ F: include/linux/if_rmnet.h
|
||||
|
||||
QUALCOMM TSENS THERMAL DRIVER
|
||||
M: Amit Kucheria <amitk@kernel.org>
|
||||
M: Thara Gopinath <thara.gopinath@linaro.org>
|
||||
L: linux-pm@vger.kernel.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
@ -18095,7 +18134,7 @@ THERMAL/CPU_COOLING
|
||||
M: Amit Daniel Kachhap <amit.kachhap@gmail.com>
|
||||
M: Daniel Lezcano <daniel.lezcano@linaro.org>
|
||||
M: Viresh Kumar <viresh.kumar@linaro.org>
|
||||
M: Javi Merino <javi.merino@kernel.org>
|
||||
R: Lukasz Luba <lukasz.luba@arm.com>
|
||||
L: linux-pm@vger.kernel.org
|
||||
S: Supported
|
||||
F: Documentation/driver-api/thermal/cpu-cooling-api.rst
|
||||
|
||||
@ -602,11 +602,6 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
|
||||
*/
|
||||
#define xlate_dev_mem_ptr(p) __va(p)
|
||||
|
||||
/*
|
||||
* Convert a virtual cached pointer to an uncached pointer
|
||||
*/
|
||||
#define xlate_dev_kmem_ptr(p) p
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif /* __ALPHA_IO_H */
|
||||
|
||||
@ -13,12 +13,12 @@ static char *pc873xx_names[] = {
|
||||
static unsigned int base, model;
|
||||
|
||||
|
||||
unsigned int __init pc873xx_get_base()
|
||||
unsigned int __init pc873xx_get_base(void)
|
||||
{
|
||||
return base;
|
||||
}
|
||||
|
||||
char *__init pc873xx_get_model()
|
||||
char *__init pc873xx_get_model(void)
|
||||
{
|
||||
return pc873xx_names[model];
|
||||
}
|
||||
|
||||
@ -13,6 +13,7 @@
|
||||
#include <linux/types.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <net/checksum.h>
|
||||
|
||||
|
||||
#define ldq_u(x,y) \
|
||||
|
||||
@ -6,6 +6,7 @@
|
||||
config ARC
|
||||
def_bool y
|
||||
select ARC_TIMERS
|
||||
select ARCH_HAS_CACHE_LINE_SIZE
|
||||
select ARCH_HAS_DEBUG_VM_PGTABLE
|
||||
select ARCH_HAS_DMA_PREP_COHERENT
|
||||
select ARCH_HAS_PTE_SPECIAL
|
||||
@ -28,6 +29,7 @@ config ARC
|
||||
select GENERIC_SMP_IDLE_THREAD
|
||||
select HAVE_ARCH_KGDB
|
||||
select HAVE_ARCH_TRACEHOOK
|
||||
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
|
||||
select HAVE_DEBUG_STACKOVERFLOW
|
||||
select HAVE_DEBUG_KMEMLEAK
|
||||
select HAVE_FUTEX_CMPXCHG if FUTEX
|
||||
@ -48,9 +50,6 @@ config ARC
|
||||
select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
|
||||
select SET_FS
|
||||
|
||||
config ARCH_HAS_CACHE_LINE_SIZE
|
||||
def_bool y
|
||||
|
||||
config TRACE_IRQFLAGS_SUPPORT
|
||||
def_bool y
|
||||
|
||||
@ -86,10 +85,6 @@ config STACKTRACE_SUPPORT
|
||||
def_bool y
|
||||
select STACKTRACE
|
||||
|
||||
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
|
||||
def_bool y
|
||||
depends on ARC_MMU_V4
|
||||
|
||||
menu "ARC Architecture Configuration"
|
||||
|
||||
menu "ARC Platform/SoC/Board"
|
||||
|
||||
@ -31,6 +31,7 @@ config ARM
|
||||
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
|
||||
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
|
||||
select ARCH_SUPPORTS_ATOMIC_RMW
|
||||
select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
|
||||
select ARCH_USE_BUILTIN_BSWAP
|
||||
select ARCH_USE_CMPXCHG_LOCKREF
|
||||
select ARCH_USE_MEMTEST
|
||||
@ -77,6 +78,7 @@ config ARM
|
||||
select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
|
||||
select HAVE_ARCH_THREAD_STRUCT_WHITELIST
|
||||
select HAVE_ARCH_TRACEHOOK
|
||||
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
|
||||
select HAVE_ARM_SMCCC if CPU_V7
|
||||
select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
|
||||
select HAVE_CONTEXT_TRACKING
|
||||
@ -1511,14 +1513,6 @@ config HW_PERF_EVENTS
|
||||
def_bool y
|
||||
depends on ARM_PMU
|
||||
|
||||
config SYS_SUPPORTS_HUGETLBFS
|
||||
def_bool y
|
||||
depends on ARM_LPAE
|
||||
|
||||
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
|
||||
def_bool y
|
||||
depends on ARM_LPAE
|
||||
|
||||
config ARCH_WANT_GENERAL_HUGETLB
|
||||
def_bool y
|
||||
|
||||
|
||||
@ -118,8 +118,8 @@ asflags-y := -DZIMAGE
|
||||
|
||||
# Supply kernel BSS size to the decompressor via a linker symbol.
|
||||
KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
|
||||
sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
|
||||
-e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
|
||||
sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
|
||||
-e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
|
||||
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
|
||||
# Supply ZRELADDR to the decompressor via a linker symbol.
|
||||
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
|
||||
|
||||
@ -355,7 +355,6 @@
|
||||
reg = <0x20050000 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin>;
|
||||
status = "disabled";
|
||||
@ -366,7 +365,6 @@
|
||||
reg = <0x20050010 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm1_pin>;
|
||||
status = "disabled";
|
||||
@ -377,7 +375,6 @@
|
||||
reg = <0x20050020 0x10>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2_pin>;
|
||||
status = "disabled";
|
||||
@ -388,7 +385,6 @@
|
||||
reg = <0x20050030 0x10>;
|
||||
#pwm-cells = <2>;
|
||||
clocks = <&cru PCLK_PWM>;
|
||||
clock-names = "pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3_pin>;
|
||||
status = "disabled";
|
||||
|
||||
@ -679,7 +679,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin>;
|
||||
clocks = <&cru PCLK_RKPWM>;
|
||||
clock-names = "pwm";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -690,7 +689,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm1_pin>;
|
||||
clocks = <&cru PCLK_RKPWM>;
|
||||
clock-names = "pwm";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -701,7 +699,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2_pin>;
|
||||
clocks = <&cru PCLK_RKPWM>;
|
||||
clock-names = "pwm";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -712,7 +709,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3_pin>;
|
||||
clocks = <&cru PCLK_RKPWM>;
|
||||
clock-names = "pwm";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
@ -63,7 +63,6 @@ CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_MOUSE_PS2 is not set
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_LEGACY_PTY_COUNT=16
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
|
||||
@ -7,7 +7,6 @@ CONFIG_EXPERT=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_ARCH_FOOTBRIDGE=y
|
||||
CONFIG_ARCH_CATS=y
|
||||
CONFIG_ARCH_PERSONAL_SERVER=y
|
||||
CONFIG_ARCH_EBSA285_HOST=y
|
||||
CONFIG_ARCH_NETWINDER=y
|
||||
CONFIG_LEDS=y
|
||||
|
||||
@ -72,7 +72,6 @@ CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_UINPUT=m
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_PXA=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
|
||||
@ -79,7 +79,6 @@ CONFIG_INPUT_EVBUG=y
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
|
||||
@ -69,7 +69,6 @@ CONFIG_SMSC911X=y
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_NONSTANDARD=y
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_MPS2_UART_CONSOLE=y
|
||||
CONFIG_SERIAL_MPS2_UART=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
|
||||
@ -100,7 +100,6 @@ CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_LEGACY_PTY_COUNT=16
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
|
||||
|
||||
@ -53,7 +53,6 @@ CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_PXA=y
|
||||
CONFIG_SERIAL_PXA_CONSOLE=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user