[WATCHDOG] w83697hf/hg WDT driver - patch 14

This is patch 14 in the series of patches that converts
Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's
w83697hf/hg watchdog driver.

This patch contains following changes:
 - Clean-up initialization code (part 1: remove
   w83697hf_select_wd_register() and
   w83697hf_unselect_wd_register() functions).
 - Make sure that the watchdog device is stopped
   as soon as we found it.

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Samuel Tardieu 2006-09-07 11:57:00 +02:00 committed by Wim Van Sebroeck
parent 089d8139f4
commit fa69afd3c2

View File

@ -120,29 +120,14 @@ w83697hf_deselect_wdt(void)
w83697hf_lock();
}
static void
w83697hf_select_wd_register(void)
{
w83697hf_unlock();
w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */
w83697hf_set_reg(0x30, 0x01); /* Enable timer/activate GPIO2 via bit 0 */
}
static void
w83697hf_unselect_wd_register(void)
{
w83697hf_lock();
}
static void
w83697hf_init(void)
{
unsigned char t;
w83697hf_select_wd_register();
w83697hf_select_wdt();
w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
t = w83697hf_get_reg(0xF3); /* Read CRF3 */
if (t != 0) {
@ -153,7 +138,7 @@ w83697hf_init(void)
t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */
w83697hf_set_reg(0xF4, t); /* Write back to CRF4 */
w83697hf_unselect_wd_register();
w83697hf_deselect_wdt();
}
static int
@ -412,6 +397,8 @@ wdt_init(void)
goto out;
found:
w83697hf_init();
wdt_disable(); /* Disable watchdog until first use */
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
@ -419,8 +406,6 @@ found:
WATCHDOG_TIMEOUT);
}
w83697hf_init();
ret = register_reboot_notifier(&wdt_notifier);
if (ret != 0) {
printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",