iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: imx8mn: Correct WDOG_B pin configuration

Browse Source 
Different revision of i.MX8MN EVK boards may have different external
pull up registor design, some are enabled while some are NOT, to make
sure the WDOG_B pin works properly, better to enable internal pull up
resistor. Since enabling internal pull up resistor is NOT harmful and
having benefit of flexibility on different board design, just enable
it for all i.MX8MN boards; And schmitt input is NOT necessary for this
WDOG_B output pin, so remove it; Open drain outputs provide more
flexibility to a designer as they can be pulled-up to any voltage found
in the system, so enable it as well.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Anson Huang 2020-10-12 20:44:01 +08:00 committed by Shawn Guo
parent b781820927
commit fa88e6e406
2 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
View File

@ -340,7 +340,7 @@
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
>;
};
};

2
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
View File

@ -545,7 +545,7 @@
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
>;
};
};