iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mm: introduce put_user_page*(), placeholder versions

Browse Source 
A discussion of the overall problem is below.

As mentioned in patch 0001, the steps are to fix the problem are:

1) Provide put_user_page*() routines, intended to be used
   for releasing pages that were pinned via get_user_pages*().

2) Convert all of the call sites for get_user_pages*(), to
   invoke put_user_page*(), instead of put_page(). This involves dozens of
   call sites, and will take some time.

3) After (2) is complete, use get_user_pages*() and put_user_page*() to
   implement tracking of these pages. This tracking will be separate from
   the existing struct page refcounting.

4) Use the tracking and identification of these pages, to implement
   special handling (especially in writeback paths) when the pages are
   backed by a filesystem.

Overview
========

Some kernel components (file systems, device drivers) need to access
memory that is specified via process virtual address.  For a long time,
the API to achieve that was get_user_pages ("GUP") and its variations.
However, GUP has critical limitations that have been overlooked; in
particular, GUP does not interact correctly with filesystems in all
situations.  That means that file-backed memory + GUP is a recipe for
potential problems, some of which have already occurred in the field.

GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem
code to get the struct page behind a virtual address and to let storage
hardware perform a direct copy to or from that page.  This is a
short-lived access pattern, and as such, the window for a concurrent
writeback of GUP'd page was small enough that there were not (we think)
any reported problems.  Also, userspace was expected to understand and
accept that Direct IO was not synchronized with memory-mapped access to
that data, nor with any process address space changes such as munmap(),
mremap(), etc.

Over the years, more GUP uses have appeared (virtualization, device
drivers, RDMA) that can keep the pages they get via GUP for a long period
of time (seconds, minutes, hours, days, ...).  This long-term pinning
makes an underlying design problem more obvious.

In fact, there are a number of key problems inherent to GUP:

Interactions with file systems
==============================

File systems expect to be able to write back data, both to reclaim pages,
and for data integrity.  Allowing other hardware (NICs, GPUs, etc) to gain
write access to the file memory pages means that such hardware can dirty
the pages, without the filesystem being aware.  This can, in some cases
(depending on filesystem, filesystem options, block device, block device
options, and other variables), lead to data corruption, and also to kernel
bugs of the form:

    kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899!
    backtrace:
        ext4_writepage
        __writepage
        write_cache_pages
        ext4_writepages
        do_writepages
        __writeback_single_inode
        writeback_sb_inodes
        __writeback_inodes_wb
        wb_writeback
        wb_workfn
        process_one_work
        worker_thread
        kthread
        ret_from_fork

...which is due to the file system asserting that there are still buffer
heads attached:

        ({                                                      \
                BUG_ON(!PagePrivate(page));                     \
                ((struct buffer_head *)page_private(page));     \
        })

Dave Chinner's description of this is very clear:

    "The fundamental issue is that ->page_mkwrite must be called on every
    write access to a clean file backed page, not just the first one.
    How long the GUP reference lasts is irrelevant, if the page is clean
    and you need to dirty it, you must call ->page_mkwrite before it is
    marked writeable and dirtied. Every. Time."

This is just one symptom of the larger design problem: real filesystems
that actually write to a backing device, do not actually support
get_user_pages() being called on their pages, and letting hardware write
directly to those pages--even though that pattern has been going on since
about 2005 or so.

Long term GUP
=============

Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a
writeable mapping is created), and the pages are file-backed.  That can
lead to filesystem corruption.  What happens is that when a file-backed
page is being written back, it is first mapped read-only in all of the CPU
page tables; the file system then assumes that nobody can write to the
page, and that the page content is therefore stable.  Unfortunately, the
GUP callers generally do not monitor changes to the CPU pages tables; they
instead assume that the following pattern is safe (it's not):

    get_user_pages()

    Hardware can keep a reference to those pages for a very long time,
    and write to it at any time.  Because "hardware" here means "devices
    that are not a CPU", this activity occurs without any interaction with
    the kernel's file system code.

    for each page
        set_page_dirty
        put_page()

In fact, the GUP documentation even recommends that pattern.

Anyway, the file system assumes that the page is stable (nothing is
writing to the page), and that is a problem: stable page content is
necessary for many filesystem actions during writeback, such as checksum,
encryption, RAID striping, etc.  Furthermore, filesystem features like COW
(copy on write) or snapshot also rely on being able to use a new page for
as memory for that memory range inside the file.

Corruption during write back is clearly possible here.  To solve that, one
idea is to identify pages that have active GUP, so that we can use a
bounce page to write stable data to the filesystem.  The filesystem would
work on the bounce page, while any of the active GUP might write to the
original page.  This would avoid the stable page violation problem, but
note that it is only part of the overall solution, because other problems
remain.

Other filesystem features that need to replace the page with a new one can
be inhibited for pages that are GUP-pinned.  This will, however, alter and
limit some of those filesystem features.  The only fix for that would be
to require GUP users to monitor and respond to CPU page table updates.
Subsystems such as ODP and HMM do this, for example.  This aspect of the
problem is still under discussion.

Direct IO
=========

Direct IO can cause corruption, if userspace does Direct-IO that writes to
a range of virtual addresses that are mmap'd to a file.  The pages written
to are file-backed pages that can be under write back, while the Direct IO
is taking place.  Here, Direct IO races with a write back: it calls GUP
before page_mkclean() has replaced the CPU pte with a read-only entry.
The race window is pretty small, which is probably why years have gone by
before we noticed this problem: Direct IO is generally very quick, and
tends to finish up before the filesystem gets around to do anything with
the page contents.  However, it's still a real problem.  The solution is
to never let GUP return pages that are under write back, but instead,
force GUP to take a write fault on those pages.  That way, GUP will
properly synchronize with the active write back.  This does not change the
required GUP behavior, it just avoids that race.

Details
=======

Introduces put_user_page(), which simply calls put_page().  This provides
a way to update all get_user_pages*() callers, so that they call
put_user_page(), instead of put_page().

Also introduces put_user_pages(), and a few dirty/locked variations, as a
replacement for release_pages(), and also as a replacement for open-coded
loops that release multiple pages.  These may be used for subsequent
performance improvements, via batching of pages to be released.

This is the first step of fixing a problem (also described in [1] and [2])
with interactions between get_user_pages ("gup") and filesystems.

Problem description: let's start with a bug report.  Below, is what
happens sometimes, under memory pressure, when a driver pins some pages
via gup, and then marks those pages dirty, and releases them.  Note that
the gup documentation actually recommends that pattern.  The problem is
that the filesystem may do a writeback while the pages were gup-pinned,
and then the filesystem believes that the pages are clean.  So, when the
driver later marks the pages as dirty, that conflicts with the
filesystem's page tracking and results in a BUG(), like this one that I
experienced:

    kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899!
    backtrace:
        ext4_writepage
        __writepage
        write_cache_pages
        ext4_writepages
        do_writepages
        __writeback_single_inode
        writeback_sb_inodes
        __writeback_inodes_wb
        wb_writeback
        wb_workfn
        process_one_work
        worker_thread
        kthread
        ret_from_fork

...which is due to the file system asserting that there are still buffer
heads attached:

        ({                                                      \
                BUG_ON(!PagePrivate(page));                     \
                ((struct buffer_head *)page_private(page));     \
        })

Dave Chinner's description of this is very clear:

    "The fundamental issue is that ->page_mkwrite must be called on
    every write access to a clean file backed page, not just the first
    one.  How long the GUP reference lasts is irrelevant, if the page is
    clean and you need to dirty it, you must call ->page_mkwrite before it
    is marked writeable and dirtied.  Every.  Time."

This is just one symptom of the larger design problem: real filesystems
that actually write to a backing device, do not actually support
get_user_pages() being called on their pages, and letting hardware write
directly to those pages--even though that pattern has been going on since
about 2005 or so.

The steps are to fix it are:

1) (This patch): provide put_user_page*() routines, intended to be used
   for releasing pages that were pinned via get_user_pages*().

2) Convert all of the call sites for get_user_pages*(), to
   invoke put_user_page*(), instead of put_page(). This involves dozens of
   call sites, and will take some time.

3) After (2) is complete, use get_user_pages*() and put_user_page*() to
   implement tracking of these pages. This tracking will be separate from
   the existing struct page refcounting.

4) Use the tracking and identification of these pages, to implement
   special handling (especially in writeback paths) when the pages are
   backed by a filesystem.

[1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()"
[2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"

Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>		[docs]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
John Hubbard 2019-05-13 17:19:08 -07:00 committed by Linus Torvalds
parent 4eb0716e86
commit fc1d8e7cca
2 changed files with 129 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
include/linux/mm.h
View File

@ -1007,6 +1007,30 @@ static inline void put_page(struct page *page)
__put_page(page);
}
/**
* put_user_page() - release a gup-pinned page
* @page: pointer to page to be released
*
* Pages that were pinned via get_user_pages*() must be released via
* either put_user_page(), or one of the put_user_pages*() routines
* below. This is so that eventually, pages that are pinned via
* get_user_pages*() can be separately tracked and uniquely handled. In
* particular, interactions with RDMA and filesystems need special
* handling.
*
* put_user_page() and put_page() are not interchangeable, despite this early
* implementation that makes them look the same. put_user_page() calls must
* be perfectly matched up with get_user_page() calls.
*/
static inline void put_user_page(struct page *page)
{
put_page(page);
}
void put_user_pages_dirty(struct page **pages, unsigned long npages);
void put_user_pages_dirty_lock(struct page **pages, unsigned long npages);
void put_user_pages(struct page **pages, unsigned long npages);
#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
#define SECTION_IN_PAGE_FLAGS
#endif

105
mm/gup.c
View File

@ -28,6 +28,111 @@ struct follow_page_context {
unsigned int page_mask;
};
typedef int (*set_dirty_func_t)(struct page *page);
static void __put_user_pages_dirty(struct page **pages,
unsigned long npages,
set_dirty_func_t sdf)
{
unsigned long index;
for (index = 0; index < npages; index++) {
struct page *page = compound_head(pages[index]);
/*
* Checking PageDirty at this point may race with
* clear_page_dirty_for_io(), but that's OK. Two key cases:
*
* 1) This code sees the page as already dirty, so it skips
* the call to sdf(). That could happen because
* clear_page_dirty_for_io() called page_mkclean(),
* followed by set_page_dirty(). However, now the page is
* going to get written back, which meets the original
* intention of setting it dirty, so all is well:
* clear_page_dirty_for_io() goes on to call
* TestClearPageDirty(), and write the page back.
*
* 2) This code sees the page as clean, so it calls sdf().
* The page stays dirty, despite being written back, so it
* gets written back again in the next writeback cycle.
* This is harmless.
*/
if (!PageDirty(page))
sdf(page);
put_user_page(page);
}
}
/**
* put_user_pages_dirty() - release and dirty an array of gup-pinned pages
* @pages: array of pages to be marked dirty and released.
* @npages: number of pages in the @pages array.
*
* "gup-pinned page" refers to a page that has had one of the get_user_pages()
* variants called on that page.
*
* For each page in the @pages array, make that page (or its head page, if a
* compound page) dirty, if it was previously listed as clean. Then, release
* the page using put_user_page().
*
* Please see the put_user_page() documentation for details.
*
* set_page_dirty(), which does not lock the page, is used here.
* Therefore, it is the caller's responsibility to ensure that this is
* safe. If not, then put_user_pages_dirty_lock() should be called instead.
*
*/
void put_user_pages_dirty(struct page **pages, unsigned long npages)
{
__put_user_pages_dirty(pages, npages, set_page_dirty);
}
EXPORT_SYMBOL(put_user_pages_dirty);
/**
* put_user_pages_dirty_lock() - release and dirty an array of gup-pinned pages
* @pages: array of pages to be marked dirty and released.
* @npages: number of pages in the @pages array.
*
* For each page in the @pages array, make that page (or its head page, if a
* compound page) dirty, if it was previously listed as clean. Then, release
* the page using put_user_page().
*
* Please see the put_user_page() documentation for details.
*
* This is just like put_user_pages_dirty(), except that it invokes
* set_page_dirty_lock(), instead of set_page_dirty().
*
*/
void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
{
__put_user_pages_dirty(pages, npages, set_page_dirty_lock);
}
EXPORT_SYMBOL(put_user_pages_dirty_lock);
/**
* put_user_pages() - release an array of gup-pinned pages.
* @pages: array of pages to be marked dirty and released.
* @npages: number of pages in the @pages array.
*
* For each page in the @pages array, release the page using put_user_page().
*
* Please see the put_user_page() documentation for details.
*/
void put_user_pages(struct page **pages, unsigned long npages)
{
unsigned long index;
/*
* TODO: this can be optimized for huge pages: if a series of pages is
* physically contiguous and part of the same compound page, then a
* single operation to the head page should suffice.
*/
for (index = 0; index < npages; index++)
put_user_page(pages[index]);
}
EXPORT_SYMBOL(put_user_pages);
static struct page *no_page_table(struct vm_area_struct *vma,
unsigned int flags)
{