iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

usb: dwc2: drd: fix dwc2_drd_role_sw_set when clock could be disabled

Browse Source 
[ Upstream commit 8d387f61b0240854e81450c261beb775065bad5d ]

In case of USB_DR_MODE_PERIPHERAL, the OTG clock is disabled at the end of
the probe (it is not the case if USB_DR_MODE_HOST or USB_DR_MODE_OTG).
The clock is then enabled on udc_start.
If dwc2_drd_role_sw_set is called before udc_start (it is the case if the
usb cable is plugged at boot), GOTGCTL and GUSBCFG registers cannot be
read/written, so session cannot be overridden.
To avoid this case, check the ll_hw_enabled value and enable the clock if
it is available, and disable it after the override.

Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211005095305.66397-3-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Amelie Delaunay 2021-10-05 11:53:04 +02:00 committed by Greg Kroah-Hartman
parent 6774a42932
commit fc86da757d
1 changed files with 18 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/usb/dwc2/drd.c
View File

@ -7,6 +7,7 @@
* Author(s): Amelie Delaunay <amelie.delaunay@st.com>
*/
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/platform_device.h>
#include <linux/usb/role.h>
@ -86,6 +87,20 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
}
#endif
/*
* In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
* the probe and enabled on udc_start.
* If role-switch set is called before the udc_start, we need to enable
* the clock to read/write GOTGCTL and GUSBCFG registers to override
* mode and sessions. It is the case if cable is plugged at boot.
*/
if (!hsotg->ll_hw_enabled && hsotg->clk) {
int ret = clk_prepare_enable(hsotg->clk);
if (ret)
return ret;
}
spin_lock_irqsave(&hsotg->lock, flags);
if (role == USB_ROLE_HOST) {
@ -110,6 +125,9 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
/* This will raise a Connector ID Status Change Interrupt */
dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
if (!hsotg->ll_hw_enabled && hsotg->clk)
clk_disable_unprepare(hsotg->clk);
dev_dbg(hsotg->dev, "%s-session valid\n",
role == USB_ROLE_NONE ? "No" :
role == USB_ROLE_HOST ? "A" : "B");