From fccbc3168e5ecb2a2311ff1625bf6d9986fb4306 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 26 Mar 2022 12:14:55 -0300 Subject: [PATCH] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue [ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ] On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec on the SoM is often not detected and the following error message is seen when the sgtl5000 driver tries to read the ID register: sgtl5000 1-000a: Error reading chip id -6 The reason for the error is that the MCLK clock is not provided early enough. Fix the problem by describing the MCLK pinctrl inside the codec node instead of placing it inside the audmux pinctrl group. With this change applied the sgtl5000 is always detected on every boot. Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM") Signed-off-by: Fabio Estevam Reviewed-by: Tim Harvey Acked-by: Max Krummenacher Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 7c4ad541c3f5..b165bd6ea53b 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -314,6 +314,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -543,8 +545,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -810,6 +810,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0