[MIPS] Alchemy: Fix PCI-memory access
The problem was introduced in 2.6.18.3 with the casting of some 36bit-defines (PCI memory) in au1000.h to resource_size_t which may be u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT. With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed because the ioremap in arch/mips/au1000/common/pci.c already used the truncated addresses. With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c fails because the maximum iomem-address is 0xffffffff (32bit) but the pci-memory-start-address is 0x440000000 (36bit). To get pci working again, I propose the following patch: 1. remove the resource_size_t-casting from au1000.h again 2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and necessary here. The 36bit-handling will be done in __fixup_bigphys_addr). With this patch pci works again like in 2.6.18.2, the gcc-compile warnings in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL. Signed-off-by: Alexander Bigga <ab@mycable.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
parent
37f2674243
commit
fd046eb537
@ -1665,12 +1665,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[];
|
||||
* addresses. For PCI IO, it's simpler because we get to do the ioremap
|
||||
* ourselves and then adjust the device's resources.
|
||||
*/
|
||||
#define Au1500_EXT_CFG ((resource_size_t) 0x600000000ULL)
|
||||
#define Au1500_EXT_CFG_TYPE1 ((resource_size_t) 0x680000000ULL)
|
||||
#define Au1500_PCI_IO_START ((resource_size_t) 0x500000000ULL)
|
||||
#define Au1500_PCI_IO_END ((resource_size_t) 0x5000FFFFFULL)
|
||||
#define Au1500_PCI_MEM_START ((resource_size_t) 0x440000000ULL)
|
||||
#define Au1500_PCI_MEM_END ((resource_size_t) 0x44FFFFFFFULL)
|
||||
#define Au1500_EXT_CFG 0x600000000ULL
|
||||
#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
|
||||
#define Au1500_PCI_IO_START 0x500000000ULL
|
||||
#define Au1500_PCI_IO_END 0x5000FFFFFULL
|
||||
#define Au1500_PCI_MEM_START 0x440000000ULL
|
||||
#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
|
||||
|
||||
#define PCI_IO_START (Au1500_PCI_IO_START + 0x1000)
|
||||
#define PCI_IO_END (Au1500_PCI_IO_END)
|
||||
|
Loading…
Reference in New Issue
Block a user