diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml similarity index 65% rename from Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml rename to Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml index 01c9acf9275d..bd23257fe021 100644 --- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml @@ -1,26 +1,31 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml# +$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ARM PL353 Static Memory Controller (SMC) device-tree bindings +title: Arm PL35x Series Static Memory Controller (SMC) maintainers: - Miquel Raynal - Naga Sureshkumar Relli -description: - The PL353 Static Memory Controller is a bus where you can connect two kinds +description: | + The PL35x Static Memory Controller is a bus where you can connect two kinds of memory interfaces, which are NAND and memory mapped interfaces (such as - SRAM or NOR). + SRAM or NOR) depending on the specific configuration. + + The TRM is available here: + https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa # We need a select here so we don't match all nodes with 'arm,primecell' select: properties: compatible: contains: - const: arm,pl353-smc-r2p1 + enum: + - arm,pl353-smc-r2p1 + - arm,pl354 required: - compatible @@ -30,7 +35,9 @@ properties: compatible: items: - - const: arm,pl353-smc-r2p1 + - enum: + - arm,pl353-smc-r2p1 + - arm,pl354 - const: arm,primecell "#address-cells": @@ -46,30 +53,25 @@ properties: The three chip select regions are defined in 'ranges'. clocks: - items: - - description: clock for the memory device bus - - description: main clock of the SMC + minItems: 1 + maxItems: 2 clock-names: - items: - - const: memclk - - const: apb_pclk + minItems: 1 + maxItems: 2 ranges: minItems: 1 - description: | - Memory bus areas for interacting with the devices. Reflects - the memory layout with four integer values following: - 0 - items: - - description: NAND bank 0 - - description: NOR/SRAM bank 0 - - description: NOR/SRAM bank 1 + maxItems: 8 - interrupts: true + interrupts: + minItems: 1 + items: + - description: Combined or Memory interface 0 IRQ + - description: Memory interface 1 IRQ patternProperties: - "@[0-3],[a-f0-9]+$": + "@[0-7],[a-f0-9]+$": type: object description: | The child device node represents the controller connected to the SMC @@ -87,7 +89,7 @@ patternProperties: - description: | Chip-select ID, as in the parent range property. minimum: 0 - maximum: 2 + maximum: 7 - description: | Offset of the memory region requested by the device. - description: | @@ -102,12 +104,36 @@ required: - reg - clock-names - clocks - - "#address-cells" - - "#size-cells" - - ranges additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: arm,pl354 + then: + properties: + clocks: + # According to TRM, really should be 3 clocks + maxItems: 1 + + clock-names: + const: apb_pclk + + else: + properties: + clocks: + items: + - description: clock for the memory device bus + - description: main clock of the SMC + + clock-names: + items: + - const: memclk + - const: apb_pclk + examples: - | smcc: memory-controller@e000e000 { diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml index 6e3995bb1630..4a257fac577e 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml @@ -230,6 +230,13 @@ properties: Wait-pin used by client. Must be less than "gpmc,num-waitpins". $ref: /schemas/types.yaml#/definitions/uint32 + ti,wait-pin-polarity: + description: | + Set the desired polarity for the selected wait pin. + 0 for active low, 1 for active high. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + gpmc,wait-on-read: description: Enables wait monitoring on reads. type: boolean diff --git a/MAINTAINERS b/MAINTAINERS index 4fa3a1ef487c..45c0030bbf0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1685,7 +1685,7 @@ M: Miquel Raynal M: Naga Sureshkumar Relli L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml +F: Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml F: drivers/memory/pl353-smc.c ARM PRIMECELL CLCD PL110 DRIVER diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 2351f2708da2..57d9f91fe89b 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -134,6 +134,7 @@ #define GPMC_CONFIG_DEV_SIZE 0x00000002 #define GPMC_CONFIG_DEV_TYPE 0x00000003 +#define GPMC_CONFIG_WAITPINPOLARITY(pin) (BIT(pin) << 8) #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) @@ -229,6 +230,12 @@ struct omap3_gpmc_regs { struct gpmc_cs_config cs_context[GPMC_CS_NUM]; }; +struct gpmc_waitpin { + u32 pin; + u32 polarity; + struct gpio_desc *desc; +}; + struct gpmc_device { struct device *dev; int irq; @@ -236,6 +243,7 @@ struct gpmc_device { struct gpio_chip gpio_chip; struct notifier_block nb; struct omap3_gpmc_regs context; + struct gpmc_waitpin *waitpins; int nirqs; unsigned int is_suspended:1; struct resource *data; @@ -1035,6 +1043,62 @@ void gpmc_cs_free(int cs) } EXPORT_SYMBOL(gpmc_cs_free); +static bool gpmc_is_valid_waitpin(u32 waitpin) +{ + return waitpin < gpmc_nr_waitpins; +} + +static int gpmc_alloc_waitpin(struct gpmc_device *gpmc, + struct gpmc_settings *p) +{ + int ret; + struct gpmc_waitpin *waitpin; + struct gpio_desc *waitpin_desc; + + if (!gpmc_is_valid_waitpin(p->wait_pin)) + return -EINVAL; + + waitpin = &gpmc->waitpins[p->wait_pin]; + + if (!waitpin->desc) { + /* Reserve the GPIO for wait pin usage. + * GPIO polarity doesn't matter here. Wait pin polarity + * is set in GPMC_CONFIG register. + */ + waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip, + p->wait_pin, "WAITPIN", + GPIO_ACTIVE_HIGH, + GPIOD_IN); + + ret = PTR_ERR(waitpin_desc); + if (IS_ERR(waitpin_desc) && ret != -EBUSY) + return ret; + + /* New wait pin */ + waitpin->desc = waitpin_desc; + waitpin->pin = p->wait_pin; + waitpin->polarity = p->wait_pin_polarity; + } else { + /* Shared wait pin */ + if (p->wait_pin_polarity != waitpin->polarity || + p->wait_pin != waitpin->pin) { + dev_err(gpmc->dev, + "shared-wait-pin: invalid configuration\n"); + return -EINVAL; + } + dev_info(gpmc->dev, "shared wait-pin: %d\n", waitpin->pin); + } + + return 0; +} + +static void gpmc_free_waitpin(struct gpmc_device *gpmc, + int wait_pin) +{ + if (gpmc_is_valid_waitpin(wait_pin)) + gpiochip_free_own_desc(gpmc->waitpins[wait_pin].desc); +} + /** * gpmc_configure - write request to configure gpmc * @cmd: command type @@ -1886,6 +1950,17 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + if (p->wait_pin_polarity != GPMC_WAITPINPOLARITY_INVALID) { + config1 = gpmc_read_reg(GPMC_CONFIG); + + if (p->wait_pin_polarity == GPMC_WAITPINPOLARITY_ACTIVE_LOW) + config1 &= ~GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin); + else if (p->wait_pin_polarity == GPMC_WAITPINPOLARITY_ACTIVE_HIGH) + config1 |= GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin); + + gpmc_write_reg(GPMC_CONFIG, config1); + } + return 0; } @@ -1975,7 +2050,25 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) __func__); } + p->wait_pin = GPMC_WAITPIN_INVALID; + p->wait_pin_polarity = GPMC_WAITPINPOLARITY_INVALID; + if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { + if (!gpmc_is_valid_waitpin(p->wait_pin)) { + pr_err("%s: Invalid wait-pin (%d)\n", __func__, p->wait_pin); + p->wait_pin = GPMC_WAITPIN_INVALID; + } + + if (!of_property_read_u32(np, "ti,wait-pin-polarity", + &p->wait_pin_polarity)) { + if (p->wait_pin_polarity != GPMC_WAITPINPOLARITY_ACTIVE_HIGH && + p->wait_pin_polarity != GPMC_WAITPINPOLARITY_ACTIVE_LOW) { + pr_err("%s: Invalid wait-pin-polarity (%d)\n", + __func__, p->wait_pin_polarity); + p->wait_pin_polarity = GPMC_WAITPINPOLARITY_INVALID; + } + } + p->wait_on_read = of_property_read_bool(np, "gpmc,wait-on-read"); p->wait_on_write = of_property_read_bool(np, @@ -2080,7 +2173,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, const char *name; int ret, cs; u32 val; - struct gpio_desc *waitpin_desc = NULL; struct gpmc_device *gpmc = platform_get_drvdata(pdev); if (of_property_read_u32(child, "reg", &cs) < 0) { @@ -2208,17 +2300,9 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, /* Reserve wait pin if it is required and valid */ if (gpmc_s.wait_on_read || gpmc_s.wait_on_write) { - unsigned int wait_pin = gpmc_s.wait_pin; - - waitpin_desc = gpiochip_request_own_desc(&gpmc->gpio_chip, - wait_pin, "WAITPIN", - GPIO_ACTIVE_HIGH, - GPIOD_IN); - if (IS_ERR(waitpin_desc)) { - dev_err(&pdev->dev, "invalid wait-pin: %d\n", wait_pin); - ret = PTR_ERR(waitpin_desc); + ret = gpmc_alloc_waitpin(gpmc, &gpmc_s); + if (ret < 0) goto err; - } } gpmc_cs_show_timings(cs, "before gpmc_cs_program_settings"); @@ -2260,7 +2344,7 @@ err_child_fail: ret = -ENODEV; err_cs: - gpiochip_free_own_desc(waitpin_desc); + gpmc_free_waitpin(gpmc, gpmc_s.wait_pin); err: gpmc_cs_free(cs); @@ -2489,7 +2573,7 @@ static int omap_gpmc_context_notifier(struct notifier_block *nb, static int gpmc_probe(struct platform_device *pdev) { - int rc; + int rc, i; u32 l; struct resource *res; struct gpmc_device *gpmc; @@ -2545,6 +2629,15 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_nr_waitpins = GPMC_NR_WAITPINS; } + gpmc->waitpins = devm_kzalloc(&pdev->dev, + gpmc_nr_waitpins * sizeof(struct gpmc_waitpin), + GFP_KERNEL); + if (!gpmc->waitpins) + return -ENOMEM; + + for (i = 0; i < gpmc_nr_waitpins; i++) + gpmc->waitpins[i].pin = GPMC_WAITPIN_INVALID; + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -2598,9 +2691,12 @@ gpio_init_failed: static int gpmc_remove(struct platform_device *pdev) { + int i; struct gpmc_device *gpmc = platform_get_drvdata(pdev); cpu_pm_unregister_notifier(&gpmc->nb); + for (i = 0; i < gpmc_nr_waitpins; i++) + gpmc_free_waitpin(gpmc, i); gpmc_free_irq(gpmc); gpmc_mem_exit(); pm_runtime_put_sync(&pdev->dev); diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h index c9cc4e32435d..dcca6c5e23bb 100644 --- a/include/linux/platform_data/gpmc-omap.h +++ b/include/linux/platform_data/gpmc-omap.h @@ -136,6 +136,13 @@ struct gpmc_device_timings { #define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ #define GPMC_MUX_AD 2 /* Addr-Data multiplex */ +/* Wait pin polarity values */ +#define GPMC_WAITPINPOLARITY_INVALID UINT_MAX +#define GPMC_WAITPINPOLARITY_ACTIVE_LOW 0 +#define GPMC_WAITPINPOLARITY_ACTIVE_HIGH 1 + +#define GPMC_WAITPIN_INVALID UINT_MAX + struct gpmc_settings { bool burst_wrap; /* enables wrap bursting */ bool burst_read; /* enables read page/burst mode */ @@ -149,6 +156,7 @@ struct gpmc_settings { u32 device_width; /* device bus width (8 or 16 bit) */ u32 mux_add_data; /* multiplex address & data */ u32 wait_pin; /* wait-pin to be used */ + u32 wait_pin_polarity; }; /* Data for each chip select */