iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

net: phy: broadcom: Wire suspend/resume for BCM54810

Browse Source 
The BCM54810 PHY can use the standard BMCR Power down suspend, but needs
a custom resume routine which first clear the Power down bit, and then
re-initializes the PHY. While in low-power mode, the PHY only accepts
writes to the BMCR register. The datasheet clearly says it:

Reads or writes to any MII register other than MII Control register
(address 00h) while the device is in the standby power-down mode may
cause unpredictable results.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Florian Fainelli 2020-02-19 12:00:49 -08:00 committed by David S. Miller
parent cb64da3a5b
commit fe26821fa6
1 changed files with 16 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/net/phy/broadcom.c
View File

@ -313,6 +313,20 @@ static int bcm54xx_config_init(struct phy_device *phydev)
return 0;
}
static int bcm54xx_resume(struct phy_device *phydev)
{
int ret;
/* Writes to register other than BMCR would be ignored
* unless we clear the PDOWN bit first
*/
ret = genphy_resume(phydev);
if (ret < 0)
return ret;
return bcm54xx_config_init(phydev);
}
static int bcm5482_config_init(struct phy_device *phydev)
{
int err, reg;
@ -706,6 +720,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_aneg = bcm5481_config_aneg,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
.suspend = genphy_suspend,
.resume = bcm54xx_resume,
}, {
.phy_id = PHY_ID_BCM5482,
.phy_id_mask = 0xfffffff0,