iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

drm/i915: Nuke dg2_ddi_pre_enable_dp()

Browse Source 
dg2_ddi_pre_enable_dp() has outlived its usefulness so eliminate
it.

The one thing that tgl_ddi_pre_enable_dp() is missing that we
need is intel_ddi_config_transcoder_dp2(). So we'll bring that
over.

tgl_ddi_pre_enable_dp() does also have a few things that
dg2_ddi_pre_enable_dp() didn't have:
- icl_program_mg_dp_mode() -> nop due to intel_phy_is_tc()==false on DG2
- intel_ddi_power_up_lanes() -> nop due to intel_phy_is_combo()==false on DG2
- intel_ddi_mso_configure() -> only matters for MSO panels

Another slight difference is that dg2_ddi_pre_enable_dp() was
missing a bigjoiner check around intel_dsc_enable(), which
tgl_ddi_pre_enable_dp() does have.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119122150.12941-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
This commit is contained in:
Ville Syrjälä 2022-01-19 14:21:50 +02:00
parent b4d7757758
commit fe6959a680
1 changed files with 4 additions and 113 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

117
drivers/gpu/drm/i915/display/intel_ddi.c
View File

@ -2289,116 +2289,6 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state)
OVERLAP_PIXELS_MASK, dss1);
}
static void dg2_ddi_pre_enable_dp(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count);
/*
* We only configure what the register value will be here. Actual
* enabling happens during link training farther down.
*/
intel_ddi_init_dp_buf_reg(encoder, crtc_state);
/*
* 1. Enable Power Wells
*
* This was handled at the beginning of intel_atomic_commit_tail(),
* before we called down into this function.
*/
/* 2. Enable Panel Power if PPS is required */
intel_pps_on(intel_dp);
/*
* 3. Enable the port PLL.
*/
intel_ddi_enable_clock(encoder, crtc_state);
/* 4. Enable IO power */
if (!intel_tc_port_in_tbt_alt_mode(dig_port))
dig_port->ddi_io_wakeref = intel_display_power_get(dev_priv,
dig_port->ddi_io_power_domain);
/*
* 5. The rest of the below are substeps under the bspec's "Enable and
* Train Display Port" step. Note that steps that are specific to
* MST will be handled by intel_mst_pre_enable_dp() before/after it
* calls into this function. Also intel_mst_pre_enable_dp() only calls
* us when active_mst_links==0, so any steps designated for "single
* stream or multi-stream master transcoder" can just be performed
* unconditionally here.
*/
/*
* 5.a Configure Transcoder Clock Select to direct the Port clock to the
* Transcoder.
*/
intel_ddi_enable_pipe_clock(encoder, crtc_state);
/* 5.b Configure transcoder for DP 2.0 128b/132b */
intel_ddi_config_transcoder_dp2(encoder, crtc_state);
/*
* 5.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
* Transport Select
*/
intel_ddi_config_transcoder_func(encoder, crtc_state);
/*
* 5.d Configure & enable DP_TP_CTL with link training pattern 1
* selected
*
* This will be handled by the intel_dp_start_link_train() farther
* down this function.
*/
/* 5.e Configure voltage swing and related IO settings */
encoder->set_signal_levels(encoder, crtc_state);
if (!is_mst)
intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
intel_dp_configure_protocol_converter(intel_dp, crtc_state);
intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
/*
* DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit
* in the FEC_CONFIGURATION register to 1 before initiating link
* training
*/
intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
intel_dp_check_frl_training(intel_dp);
intel_dp_pcon_dsc_configure(intel_dp, crtc_state);
/*
* 5.h Follow DisplayPort specification training sequence (see notes for
* failure handling)
* 5.i If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle
* Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent)
* (timeout after 800 us)
*/
intel_dp_start_link_train(intel_dp, crtc_state);
/* 5.j Set DP_TP_CTL link training to Normal */
if (!is_trans_port_sync_mode(crtc_state))
intel_dp_stop_link_train(intel_dp, crtc_state);
/* 5.k Configure and enable FEC if needed */
intel_ddi_enable_fec(encoder, crtc_state);
intel_dsc_dp_pps_write(encoder, crtc_state);
intel_dsc_enable(crtc_state);
}
static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
@ -2472,6 +2362,9 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
*/
intel_ddi_enable_pipe_clock(encoder, crtc_state);
if (HAS_DP20(dev_priv))
intel_ddi_config_transcoder_dp2(encoder, crtc_state);
/*
* 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
* Transport Select
@ -2612,9 +2505,7 @@ static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
if (IS_DG2(dev_priv))
dg2_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
else if (DISPLAY_VER(dev_priv) >= 12)
if (DISPLAY_VER(dev_priv) >= 12)
tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
else
hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);