regulator: bd718x7: Suopport configuring UVP/OVP state
The ROHM BD71837/47/50/78 do support enabling/disabling the under/over voltage protection. Add support for enabling/disabling the protection according to the device-tree information. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210705105416.GA1189560@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Matti Vaittinen
Mark Brown
parent
894cda54a7
commit
fedbfea13c
@ -55,7 +55,8 @@
|
||||
#define BD718XX_HWOPNAME(swopname) swopname##_hwcontrol
|
||||
|
||||
#define BD718XX_OPS(name, _list_voltage, _map_voltage, _set_voltage_sel, \
|
||||
_get_voltage_sel, _set_voltage_time_sel, _set_ramp_delay) \
|
||||
_get_voltage_sel, _set_voltage_time_sel, _set_ramp_delay, \
|
||||
_set_uvp, _set_ovp) \
|
||||
static const struct regulator_ops name = { \
|
||||
.enable = regulator_enable_regmap, \
|
||||
.disable = regulator_disable_regmap, \
|
||||
@ -66,6 +67,8 @@ static const struct regulator_ops name = { \
|
||||
.get_voltage_sel = (_get_voltage_sel), \
|
||||
.set_voltage_time_sel = (_set_voltage_time_sel), \
|
||||
.set_ramp_delay = (_set_ramp_delay), \
|
||||
.set_under_voltage_protection = (_set_uvp), \
|
||||
.set_over_voltage_protection = (_set_ovp), \
|
||||
}; \
|
||||
\
|
||||
static const struct regulator_ops BD718XX_HWOPNAME(name) = { \
|
||||
@ -76,6 +79,8 @@ static const struct regulator_ops BD718XX_HWOPNAME(name) = { \
|
||||
.get_voltage_sel = (_get_voltage_sel), \
|
||||
.set_voltage_time_sel = (_set_voltage_time_sel), \
|
||||
.set_ramp_delay = (_set_ramp_delay), \
|
||||
.set_under_voltage_protection = (_set_uvp), \
|
||||
.set_over_voltage_protection = (_set_ovp), \
|
||||
} \
|
||||
|
||||
/*
|
||||
@ -154,17 +159,9 @@ static void voltage_change_done(struct regulator_dev *rdev, unsigned int sel,
|
||||
* exceed it due to the scheduling.
|
||||
*/
|
||||
msleep(1);
|
||||
/*
|
||||
* Note for next hacker. The PWRGOOD should not be masked on
|
||||
* BD71847 so we will just unconditionally enable detection
|
||||
* when voltage is set.
|
||||
* If someone want's to disable PWRGOOD he must implement
|
||||
* caching and restoring the old value here. I am not
|
||||
* aware of such use-cases so for the sake of the simplicity
|
||||
* we just always enable PWRGOOD here.
|
||||
*/
|
||||
ret = regmap_update_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
|
||||
*mask, 0);
|
||||
|
||||
ret = regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
|
||||
*mask);
|
||||
if (ret)
|
||||
dev_err(&rdev->dev,
|
||||
"Failed to re-enable voltage monitoring (%d)\n",
|
||||
@ -208,12 +205,27 @@ static int voltage_change_prepare(struct regulator_dev *rdev, unsigned int sel,
|
||||
* time configurable.
|
||||
*/
|
||||
if (new > now) {
|
||||
int tmp;
|
||||
int prot_bit;
|
||||
int ldo_offset = rdev->desc->id - BD718XX_LDO1;
|
||||
|
||||
*mask = BD718XX_LDO1_VRMON80 << ldo_offset;
|
||||
ret = regmap_update_bits(rdev->regmap,
|
||||
BD718XX_REG_MVRFLTMASK2,
|
||||
*mask, *mask);
|
||||
prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset;
|
||||
ret = regmap_read(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
|
||||
&tmp);
|
||||
if (ret) {
|
||||
dev_err(&rdev->dev,
|
||||
"Failed to read voltage monitoring state\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (!(tmp & prot_bit)) {
|
||||
/* We disable protection if it was enabled... */
|
||||
ret = regmap_set_bits(rdev->regmap,
|
||||
BD718XX_REG_MVRFLTMASK2,
|
||||
prot_bit);
|
||||
/* ...and we also want to re-enable it */
|
||||
*mask = prot_bit;
|
||||
}
|
||||
if (ret) {
|
||||
dev_err(&rdev->dev,
|
||||
"Failed to stop voltage monitoring\n");
|
||||
@ -266,99 +278,6 @@ static int bd71837_set_voltage_sel_pickable_restricted(
|
||||
return regulator_set_voltage_sel_pickable_regmap(rdev, sel);
|
||||
}
|
||||
|
||||
/*
|
||||
* OPS common for BD71847 and BD71850
|
||||
*/
|
||||
BD718XX_OPS(bd718xx_pickable_range_ldo_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd718xx_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap, NULL, NULL);
|
||||
|
||||
/* BD71847 and BD71850 LDO 5 is by default OFF at RUN state */
|
||||
static const struct regulator_ops bd718xx_ldo5_ops_hwstate = {
|
||||
.is_enabled = never_enabled_by_hwstate,
|
||||
.list_voltage = regulator_list_voltage_pickable_linear_range,
|
||||
.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
|
||||
};
|
||||
|
||||
BD718XX_OPS(bd718xx_pickable_range_buck_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
regulator_set_voltage_sel_pickable_regmap,
|
||||
regulator_get_voltage_sel_pickable_regmap,
|
||||
regulator_set_voltage_time_sel, NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_ldo_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd718xx_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
NULL, bd718xx_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_buck_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
regulator_map_voltage_ascend, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL);
|
||||
|
||||
/*
|
||||
* OPS for BD71837
|
||||
*/
|
||||
BD718XX_OPS(bd71837_pickable_range_ldo_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd71837_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap, NULL, NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_pickable_range_buck_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd71837_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap,
|
||||
regulator_set_voltage_time_sel, NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_ldo_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
regulator_map_voltage_ascend, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL);
|
||||
/*
|
||||
* BD71837 bucks 3 and 4 support defining their enable/disable state also
|
||||
* when buck enable state is under HW state machine control. In that case the
|
||||
* bit [2] in CTRL register is used to indicate if regulator should be ON.
|
||||
*/
|
||||
static const struct regulator_ops bd71837_buck34_ops_hwctrl = {
|
||||
.is_enabled = bd71837_get_buck34_enable_hwctrl,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
||||
};
|
||||
|
||||
/*
|
||||
* OPS for all of the ICs - BD718(37/47/50)
|
||||
*/
|
||||
BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
/* bd718xx_buck1234_set_ramp_delay */ regulator_set_ramp_delay_regmap);
|
||||
|
||||
/*
|
||||
* BD71837 BUCK1/2/3/4
|
||||
* BD71847 BUCK1/2
|
||||
@ -536,6 +455,238 @@ struct bd718xx_regulator_data {
|
||||
int additional_init_amnt;
|
||||
};
|
||||
|
||||
static int bd718x7_xvp_sanity_check(struct regulator_dev *rdev, int lim_uV,
|
||||
int severity)
|
||||
{
|
||||
/*
|
||||
* BD71837/47/50 ... (ICs supported by this driver) do not provide
|
||||
* warnings, only protection
|
||||
*/
|
||||
if (severity != REGULATOR_SEVERITY_PROT) {
|
||||
dev_err(&rdev->dev,
|
||||
"Unsupported Under Voltage protection level\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* And protection limit is not changeable. It can only be enabled
|
||||
* or disabled
|
||||
*/
|
||||
if (lim_uV)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bd718x7_set_ldo_uvp(struct regulator_dev *rdev, int lim_uV,
|
||||
int severity, bool enable)
|
||||
{
|
||||
int ldo_offset = rdev->desc->id - BD718XX_LDO1;
|
||||
int prot_bit, ret;
|
||||
|
||||
ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset;
|
||||
|
||||
if (enable)
|
||||
return regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
|
||||
prot_bit);
|
||||
|
||||
return regmap_set_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
|
||||
prot_bit);
|
||||
}
|
||||
|
||||
static int bd718x7_get_buck_prot_reg(int id, int *reg)
|
||||
{
|
||||
|
||||
if (id > BD718XX_BUCK8) {
|
||||
WARN_ON(id > BD718XX_BUCK8);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (id > BD718XX_BUCK4)
|
||||
*reg = BD718XX_REG_MVRFLTMASK0;
|
||||
else
|
||||
*reg = BD718XX_REG_MVRFLTMASK1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bd718x7_get_buck_ovp_info(int id, int *reg, int *bit)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = bd718x7_get_buck_prot_reg(id, reg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
*bit = BIT((id % 4) * 2 + 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bd718x7_get_buck_uvp_info(int id, int *reg, int *bit)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = bd718x7_get_buck_prot_reg(id, reg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
*bit = BIT((id % 4) * 2);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bd718x7_set_buck_uvp(struct regulator_dev *rdev, int lim_uV,
|
||||
int severity, bool enable)
|
||||
{
|
||||
int bit, reg, ret;
|
||||
|
||||
ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = bd718x7_get_buck_uvp_info(rdev->desc->id, ®, &bit);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (enable)
|
||||
return regmap_clear_bits(rdev->regmap, reg, bit);
|
||||
|
||||
return regmap_set_bits(rdev->regmap, reg, bit);
|
||||
|
||||
}
|
||||
|
||||
static int bd718x7_set_buck_ovp(struct regulator_dev *rdev, int lim_uV,
|
||||
int severity,
|
||||
bool enable)
|
||||
{
|
||||
int bit, reg, ret;
|
||||
|
||||
ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = bd718x7_get_buck_ovp_info(rdev->desc->id, ®, &bit);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (enable)
|
||||
return regmap_clear_bits(rdev->regmap, reg, bit);
|
||||
|
||||
return regmap_set_bits(rdev->regmap, reg, bit);
|
||||
}
|
||||
|
||||
/*
|
||||
* OPS common for BD71847 and BD71850
|
||||
*/
|
||||
BD718XX_OPS(bd718xx_pickable_range_ldo_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd718xx_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap, NULL, NULL,
|
||||
bd718x7_set_ldo_uvp, NULL);
|
||||
|
||||
/* BD71847 and BD71850 LDO 5 is by default OFF at RUN state */
|
||||
static const struct regulator_ops bd718xx_ldo5_ops_hwstate = {
|
||||
.is_enabled = never_enabled_by_hwstate,
|
||||
.list_voltage = regulator_list_voltage_pickable_linear_range,
|
||||
.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
|
||||
.set_under_voltage_protection = bd718x7_set_ldo_uvp,
|
||||
};
|
||||
|
||||
BD718XX_OPS(bd718xx_pickable_range_buck_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
regulator_set_voltage_sel_pickable_regmap,
|
||||
regulator_get_voltage_sel_pickable_regmap,
|
||||
regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp,
|
||||
bd718x7_set_buck_ovp);
|
||||
|
||||
BD718XX_OPS(bd718xx_ldo_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd718xx_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
NULL, bd718xx_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd718xx_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
|
||||
|
||||
BD718XX_OPS(bd718xx_buck_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
regulator_map_voltage_ascend, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
|
||||
|
||||
/*
|
||||
* OPS for BD71837
|
||||
*/
|
||||
BD718XX_OPS(bd71837_pickable_range_ldo_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd71837_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap, NULL, NULL,
|
||||
bd718x7_set_ldo_uvp, NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_pickable_range_buck_ops,
|
||||
regulator_list_voltage_pickable_linear_range, NULL,
|
||||
bd71837_set_voltage_sel_pickable_restricted,
|
||||
regulator_get_voltage_sel_pickable_regmap,
|
||||
regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp,
|
||||
bd718x7_set_buck_ovp);
|
||||
|
||||
BD718XX_OPS(bd71837_ldo_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
|
||||
NULL);
|
||||
|
||||
BD718XX_OPS(bd71837_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
|
||||
|
||||
BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table,
|
||||
regulator_map_voltage_ascend, bd71837_set_voltage_sel_restricted,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
|
||||
/*
|
||||
* BD71837 bucks 3 and 4 support defining their enable/disable state also
|
||||
* when buck enable state is under HW state machine control. In that case the
|
||||
* bit [2] in CTRL register is used to indicate if regulator should be ON.
|
||||
*/
|
||||
static const struct regulator_ops bd71837_buck34_ops_hwctrl = {
|
||||
.is_enabled = bd71837_get_buck34_enable_hwctrl,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
||||
.set_under_voltage_protection = bd718x7_set_buck_uvp,
|
||||
.set_over_voltage_protection = bd718x7_set_buck_ovp,
|
||||
};
|
||||
|
||||
/*
|
||||
* OPS for all of the ICs - BD718(37/47/50)
|
||||
*/
|
||||
BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range,
|
||||
NULL, regulator_set_voltage_sel_regmap,
|
||||
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
|
||||
regulator_set_ramp_delay_regmap, bd718x7_set_buck_uvp,
|
||||
bd718x7_set_buck_ovp);
|
||||
|
||||
|
||||
|
||||
/*
|
||||
* There is a HW quirk in BD71837. The shutdown sequence timings for
|
||||
* bucks/LDOs which are controlled via register interface are changed.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user