igc: Enable PCIe PTM
commit 1b5d73fb86
upstream.
Enables PCIe PTM (Precision Time Measurement) support in the igc
driver. Notifies the PCI devices that PCIe PTM should be enabled.
PCIe PTM is similar protocol to PTP (Precision Time Protocol) running
in the PCIe fabric, it allows devices to report time measurements from
their internal clocks and the correlation with the PCIe root clock.
The i225 NIC exposes some registers that expose those time
measurements, those registers will be used, in later patches, to
implement the PTP_SYS_OFFSET_PRECISE ioctl().
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
committed by
Greg Kroah-Hartman
parent
f0a7adff63
commit
ff4443f3fc
@ -9,6 +9,7 @@
|
||||
#include <linux/udp.h>
|
||||
#include <linux/ip.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/pci.h>
|
||||
#include <net/pkt_sched.h>
|
||||
|
||||
#include <net/ipv6.h>
|
||||
@ -5041,6 +5042,10 @@ static int igc_probe(struct pci_dev *pdev,
|
||||
|
||||
pci_enable_pcie_error_reporting(pdev);
|
||||
|
||||
err = pci_enable_ptm(pdev, NULL);
|
||||
if (err < 0)
|
||||
dev_info(&pdev->dev, "PCIe PTM not supported by PCIe bus/controller\n");
|
||||
|
||||
pci_set_master(pdev);
|
||||
|
||||
err = -ENOMEM;
|
||||
|
Reference in New Issue
Block a user