IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 1abc900ddd upstream.
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA direction (e.g. AMD
hosts), leading to the device capacity to be dropped to 0:
scsi 18:0:58:0: Direct-Access-ZBC ATA WDC WSH722626AL W930 PQ: 0 ANSI: 7
scsi 18:0:58:0: Power-on or device reset occurred
sd 18:0:58:0: Attached scsi generic sg9 type 20
sd 18:0:58:0: [sdj] Host-managed zoned block device
mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c400 flags=0x0050]
mpi3mr 0000:c1:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfec0c500 flags=0x0050]
sd 18:0:58:0: [sdj] REPORT ZONES start lba 0 failed
sd 18:0:58:0: [sdj] REPORT ZONES: Result: hostbyte=DID_SOFT_ERROR driverbyte=DRIVER_OK
sd 18:0:58:0: [sdj] 0 4096-byte logical blocks: (0 B/0 B)
sd 18:0:58:0: [sdj] Write Protect is off
sd 18:0:58:0: [sdj] Mode Sense: 6b 00 10 08
sd 18:0:58:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 18:0:58:0: [sdj] Attached SCSI disk
Avoid this issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL, that is, using a read-write IOMMU mapping.
Suggested-by: Christoph Hellwig <hch@lst.de>
Fixes: 023ab2a9b4 ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-2-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82dbb57ac8 upstream.
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD
hosts).
scsi 18:0:0:0: Direct-Access-ZBC ATA WDC WSH722020AL W870 PQ: 0 ANSI: 6
scsi 18:0:0:0: SATA: handle(0x0027), sas_addr(0x300062b2083e7c40), phy(0), device_name(0x5000cca29dc35e11)
scsi 18:0:0:0: enclosure logical id (0x300062b208097c40), slot(0)
scsi 18:0:0:0: enclosure level(0x0000), connector name( C0.0)
scsi 18:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 18:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1)
sd 18:0:0:0: Attached scsi generic sg2 type 20
sd 18:0:0:0: [sdc] Host-managed zoned block device
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b200 flags=0x0050]
mpt3sas 0000:41:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0xfff9b300 flags=0x0050]
mpt3sas_cm0: mpt3sas_ctl_pre_reset_handler: Releasing the trace buffer due to adapter reset.
mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready
mpt3sas_cm0: fault_state(0x2666)!
mpt3sas_cm0: sending diag reset !!
mpt3sas_cm0: diag reset: SUCCESS
sd 18:0:0:0: [sdc] REPORT ZONES start lba 0 failed
sd 18:0:0:0: [sdc] REPORT ZONES: Result: hostbyte=DID_RESET driverbyte=DRIVER_OK
sd 18:0:0:0: [sdc] 0 4096-byte logical blocks: (0 B/0 B)
Avoid such issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by
introducing the helper function _base_scsi_dma_map() and using this helper
in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling
directly scsi_dma_map().
Fixes: 471ef9d4e4 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f499b8c79 upstream.
While working on simplifying the minmax functions, and avoiding
excessive macro expansion, it turns out that the sr.c use of the
'clamp()' macro has the arguments the wrong way around.
The clamp logic is
val = clamp(in, low, high);
and it returns the input clamped to the low/high limits. But sr.c ddid
speed = clamp(0, speed, 0xffff / 177);
which clamps the value '0' to the range '[speed, 0xffff / 177]' and ends
up being nonsensical.
Happily, I don't think anybody ever cared.
Fixes: 9fad9d560a ("scsi: sr: Fix unintentional arithmetic wraparound")
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3d98b12ee upstream.
The device does not come online when the target port is online. There were
multiple RSCNs indicating multiple devices were affected. Driver is in the
process of finishing a fabric scan. A new RSCN (device up) arrived at the
tail end of the last fabric scan. Driver mistakenly thinks the new RSCN is
being taken care of by the previous fabric scan, where this notification is
cleared and not acted on. The laser needs to be blinked again to get the
device to show up.
To prevent driver from accidentally clearing the RSCN notification, each
RSCN is given a generation value. A fabric scan will scan for that
generation(s). Any new RSCN arrive after the scan start will have a new
generation value. This will trigger another scan to get latest data. The
RSCN notification flag will be cleared when the scan is associate to that
generation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210538.w875N70K-lkp@intel.com/
Fixes: bb2ca6b3f0 ("scsi: qla2xxx: Relogin during fabric disturbance")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240710171057.35066-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9609385dd9 upstream.
Certain vendor specific targets initially register with the fabric as an
initiator function first and then re-register as a target function
afterwards.
The timing of the target function re-registration can cause a race
condition such that the driver is stuck assuming the remote port as an
initiator function and never discovers the target's hosted LUNs.
Expand the nlp_state qualifier to also include NLP_STE_PRLI_ISSUE because
the state means that PRLI was issued but we have not quite reached
MAPPED_NODE state yet. If we received an RSCN in the PRLI_ISSUE state,
then we should restart discovery again by going into DEVICE_RECOVERY.
Fixes: dded1dc31a ("scsi: lpfc: Modify when a node should be put in device recovery mode during RSCN")
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e0bf3e8ae ]
In function lpfc_xcvr_data_show, the memory allocation with kmalloc might
fail, thereby making rdp_context a null pointer. In the following context
and functions that use this pointer, there are dereferencing operations,
leading to null pointer dereference.
To fix this issue, a null pointer check should be added. If it is null,
use scnprintf to notify the user and return len.
Fixes: 479b0917e4 ("scsi: lpfc: Create a sysfs entry called lpfc_xcvr_data for transceiver info")
Signed-off-by: Huai-Yuan Liu <qq810974084@gmail.com>
Link: https://lore.kernel.org/r/20240621082545.449170-1-qq810974084@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab2068a6fb ]
The expander phy will be treated as broadcast flutter in the next
revalidation after the exp-attached end device probe failed, as follows:
[78779.654026] sas: broadcast received: 0
[78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
[78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
[78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp)
[78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
[78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
[78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
...
[78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19
[78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
[78835.187487] sas: broadcast received: 0
[78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
[78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
[78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp)
[78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
[78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
The cause of the problem is that the related ex_phy's attached_sas_addr was
not cleared after the end device probe failed, so reset it.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fad9d560a ]
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer produces this report:
[ 65.194362] ------------[ cut here ]------------
[ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9
[ 65.203607] -2147483648 * 177 cannot be represented in type 'int'
[ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 65.219923] Call Trace:
[ 65.221556] <TASK>
[ 65.223029] dump_stack_lvl+0x93/0xd0
[ 65.225573] handle_overflow+0x171/0x1b0
[ 65.228219] sr_select_speed+0xeb/0xf0
[ 65.230786] ? __pm_runtime_resume+0xe6/0x130
[ 65.233606] sr_block_ioctl+0x15d/0x1d0
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the kernel
with Commit 557f8c582a ("ubsan: Reintroduce signed overflow sanitizer").
Firstly, let's change the type of "speed" to unsigned long as
sr_select_speed()'s only caller passes in an unsigned long anyways.
$ git grep '\.select_speed'
| drivers/scsi/sr.c: .select_speed = sr_select_speed,
...
| static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi,
| unsigned long arg)
| {
| ...
| return cdi->ops->select_speed(cdi, arg);
| }
Next, let's add an extra check to make sure we don't exceed 0xffff/177
(350) since 0xffff is the max speed. This has two benefits: 1) we deal
with integer overflow before it happens and 2) we properly respect the
max speed of 0xffff. There are some "magic" numbers here but I did not
want to change more than what was necessary.
Link: https://github.com/llvm/llvm-project/pull/82432 [1]
Closes: https://github.com/KSPP/linux/issues/357
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10157b1fc1 ]
When a host is configured with a few LUNs and I/O is running, injecting FC
faults repeatedly leads to path recovery problems. The LUNs have 4 paths
each and 3 of them come back active after say an FC fault which makes 2 of
the paths go down, instead of all 4. This happens after several iterations
of continuous FC faults.
Reason here is that we're returning an I/O error whenever we're
encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC
ACCESS STATE TRANSITION) instead of retrying.
[mwilck: The original patch was developed by Rajashekhar M A and Hannes
Reinecke. I moved the code to alua_check_sense() as suggested by Mike
Christie [1]. Evan Milne had raised the question whether pg->state should
be set to transitioning in the UA case [2]. I believe that doing this is
correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O
errors. Our handler schedules an RTPG, which will only result in an I/O
error condition if the transitioning timeout expires.]
[1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/
[2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/
Co-developed-by: Rajashekhar M A <rajs@netapp.com>
Co-developed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9f365cb8bb upstream.
When building for a 32-bit platform such as ARM or i386, for which size_t
is unsigned int, there is a warning due to using an unsigned long format
specifier:
drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n",
| ~~~
| %u
1370 | i, sizeof(mr_sas_port->phy_mask) * 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the proper format specifier for size_t, %zu, to resolve the warning for
all platforms.
Fixes: 3668651def ("scsi: mpi3mr: Sanitise num_phys")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6549f538f ]
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4254dfeda8 upstream.
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/
Fixes: c696f7b83e ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90e6f08915 upstream.
The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to
the HBA if a read or write command directed at an ATA device should be
translated to an NCQ read/write command with the high prioiryt bit set
when the request uses the RT priority class and the user has enabled NCQ
priority through sysfs.
However, unlike the mpt3sas driver, the mpi3mr driver does not define
the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so
the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never
actually set and NCQ Priority cannot ever be used.
Fix this by defining these missing atributes to allow a user to check if
an ATA device supports NCQ priority and to enable/disable the use of NCQ
priority. To do this, lift the function scsih_ncq_prio_supp() out of the
mpt3sas driver and make it the generic SCSI SAS transport function
sas_ata_ncq_prio_supported(). Nothing in that function is hardware
specific, so this function can be used in both the mpt3sas driver and
the mpi3mr driver.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 023ab2a9b4 ("scsi: mpi3mr: Add support for queue command processing")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52912ca87e upstream.
For SCSI devices supporting the Command Duration Limits feature set, the
user can enable/disable this feature use through the sysfs device attribute
"cdl_enable". This attribute modification triggers a call to
scsi_cdl_enable() to enable and disable the feature for ATA devices and set
the scsi device cdl_enable field to the user provided bool value. For SCSI
devices supporting CDL, the feature set is always enabled and
scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled
by default. But the SCSI device cdl_enable field is always initialized to
false (CDL disabled), regardless of the actual device CDL feature
state. For ATA devices managed by libata (or libsas), libata-core always
disables the CDL feature set when the device is attached, thus syncing the
state of the CDL feature on the device and of the SCSI device cdl_enable
field. However, for ATA devices connected to a SAS HBA, the CDL feature is
not disabled on scan for ATA devices that have this feature enabled by
default, leading to an inconsistent state of the feature on the device with
the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in
scsi_cdl_check() to make sure that the device-side state of the CDL feature
set always matches the scsi device cdl_enable field state. This implies
that CDL will always be disabled for ATA devices connected to SAS HBAs,
which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy <scott.mccoy@wdc.com>
Fixes: 1b22cfb141 ("scsi: core: Allow enabling and disabling command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 998d09c5ef ]
DebugFS output for fw_resource_count shows:
estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141]
estimate exchange2 used[0] high water limit [1945]
Which shows incorrect display due to missing newline in seq_print().
[mkp: fix checkpatch warning about space before newline]
Fixes: 5f63a163ed ("scsi: qla2xxx: Fix exchange oversubscription for management commands")
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0184a375e ]
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d0cecb46 ]
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user.
Fixes: 9f30b67475 ("bfa: replace 2 kzalloc/copy_from_user by memdup_user")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06036a0a5d ]
As of commit 7d1d865181 ("[SCSI] libsas: fix false positive 'device
attached' conditions"), reset the phy->entacted_sas_addr address to a
zero-address when the link rate is less than 1.5G.
Currently we find that when a new device is attached, and the link rate is
less than 1.5G, but the device type is not NO_DEVICE, for example: the link
rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting
the phy->entacted_sas_addr address to the zero address, the port will
continue to be created for the phy with the zero-address, and other phys
with the zero-address will be tried to be added to the new port:
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
// phy19 is deleted but still on the parent port's phy_list
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
Therefore, it should be the same as sas_get_phy_attached_dev(). Only when
device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address.
Fixes: 7d1d865181 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 429846b4b6 ]
When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver
prints this WARNING message:
memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1)
WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr]
The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8
replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended
to be a flexible length array, so the WARN is a false positive.
To suppress the WARN, remove the constant number '1' from the array
declaration and clarify that it has flexible length. Also, adjust the
memory allocation size to match the change.
Suggested-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240323084155.166835-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb01163143 ]
Typically when an out of resource CQE status is detected, the
lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by
reducing an sdev's queue_depth.
However, the current lpfc_rampdown_queue_depth() logic does not help reduce
queue_depth. num_cmd_success is never updated and is always zero, which
means new_queue_depth will always be set to sdev->queue_depth. So,
new_queue_depth = sdev->queue_depth - new_queue_depth always sets
new_queue_depth to zero. And, scsi_change_queue_depth(sdev, 0) is
essentially a no-op.
Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth
equal to sdev->queue_depth subtracted from number of times num_rsrc_err was
incremented. If num_rsrc_err is >= sdev->queue_depth, then set
new_queue_depth equal to 1. Eventually, the frequency of Good_Status
frames will signal SCSI upper layer to auto increase the queue_depth back
to the driver default of 64 via scsi_handle_queue_ramp_up().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4623713e7a ]
IRQF_ONESHOT is found to mask HBA generated interrupts when thread_fn is
running. As a result, some EQEs/CQEs miss timely processing resulting in
SCSI layer attempts to abort commands due to io_timeout. Abort CQEs are
also not processed leading to the observations of hangs and spam of "0748
abort handler timed out waiting for aborting I/O" log messages.
Remove the IRQF_ONESHOT flag. The cmpxchg and xchg atomic operations on
lpfc_queue->queue_claimed already protect potential parallel access to an
EQ/CQ should the thread_fn get interrupted by the primary irq handler.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ddf01f2f1 ]
There are cases after NPIV deletion where the fabric switch still believes
the NPIV is logged into the fabric. This occurs when a vport is
unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the
fabric.
Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including
the fabric D_ID, removes the last ndlp reference and frees the ndlp rport
object. This sometimes causes the race condition where the final DA_ID and
LOGO are skipped from being sent to the fabric switch.
Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID
and LOGO are sent.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
