Commit Graph

17888 Commits

Author SHA1 Message Date
f53de38ea6 Merge tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.20

One small fix for a regulator range on the Banana Pi M3

* tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-09 10:27:17 -08:00
69dcddecaa Merge tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.20, round 3:
 - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct
   the description of the Wifi clock.
 - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that
   different boards can be covered. This fixes the ARM LDO failure seen
   on some customer boards.

* tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  ARM: dts: imx7d-pico: Describe the Wifi clock

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-09 10:26:36 -08:00
f15096f12a ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
According to bindings/regulator/fixed-regulator.txt the 'clocks' and
'clock-names' properties are not valid ones.

In order to turn on the Wifi clock the correct location for describing
the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly.

Fixes: 56354959cf ("ARM: dts: imx: add Boundary Devices Nitrogen7 board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-06 15:38:28 +08:00
c3b9ab5db1 ARM: dts: imx7d-pico: Describe the Wifi clock
The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D
CLKO2 output pin, so describe the pinmux and clock hierarchy in the
device tree to allow the Wifi chip to be properly clocked.

Managed to successfully test Wifi with such change. Used the standard
nvram.txt file provided by TechNexion, which selects an external 32kHz
clock for the Wifi chip by default.

Fixes: 99a52450c7 ("ARM: dts: imx7d-pico: Add Wifi support")
Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-05 12:07:16 +08:00
d9536e8098 Merge tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes,
please pull the following for 4.20:

- Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would
  break on Raspberry Pi 3B and 3B+

* tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 13:05:34 -08:00
f3b2f758ec ARM: dts: realview: Fix some more duplicate regulator nodes
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-03 12:43:42 -08:00
e25b6783c7 ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
The commit b1b8f45b31 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
introduced a wifi power sequence. Unfortunately the polarity of the reset
GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and
later in 3 B+. This wasn't discovered before since the power sequence
takes only effect in case the relevant MMC driver is compiled as a module.

Fixes: b1b8f45b31 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
Cc: stable@vger.kernel.org
Reported-by: Matthias Lueschner <lueschem@gmail.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-12-03 11:51:26 -08:00
bfed4d7308 Merge tag 'imx-fixes-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.20, round 2:
 - Reomve non-existing EEPROM device from imx51-zii-rdu1 board.
   It was added by mistake.

* tag 'imx-fixes-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30 11:57:53 -08:00
f6149484f0 Merge tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few minor fixes for omaps for v4.20-rc cycle

This set of fixes contains minor regression fixes for LogicPD dts files
for MMC pinctrl and interrupts. There is also one section annotation fix
that shows up with Clang, and a fix for an unitialized field for omap1.

* tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
  ARM: dts: am3517-som: Fix WL127x Wifi interrupt
  ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1
  ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt
  ARM: dts: am3517: Fix pinmuxing for CD on MMC1
  ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30 11:56:50 -08:00
a8505b4e02 Merge tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Moving the veyron memory node from memory@0 back to memory, as the
firmware on these devices as issues identifying the formally correct
node.

* tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Remove @0 from the veyron memory node

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30 11:49:48 -08:00
9f60337147 Merge tag 'at91-4.20-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into fixes
AT91 fixes for 4.20

 - Fix the SMC parent clock

* tag 'at91-4.20-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: use the divided clock for SMC

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30 11:49:03 -08:00
4ab7ca092c ARM: dts: at91: sama5d2: use the divided clock for SMC
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.

Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.

Fix the device tree, and the performance of Flash access is improved.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-21 11:50:32 +01:00
512cab3e7e ARM: dts: imx51-zii-rdu1: Remove EEPROM node
The EEPROM under I2C2 was put by mistake in the dts.

Remove it as it is not really present on the real hardware.

Fixes: ceef0396f3 ("ARM: dts: imx: add ZII RDU1 board")
Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-19 22:35:45 +08:00
672e60b72b ARM: dts: rockchip: Remove @0 from the veyron memory node
The Coreboot version on veyron ChromeOS devices seems to ignore
memory@0 nodes when updating the available memory and instead
inserts another memory node without the address.

This leads to 4GB systems only ever be using 2GB as the memory@0
node takes precedence. So remove the @0 for veyron devices.

Fixes: 0b639b815f ("ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards")
Cc: stable@vger.kernel.org
Reported-by: Heikki Lindholm <holin@iki.fi>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-19 09:28:17 +01:00
5f8208f557 ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
Since commit d7c5f68635 ("ARM: dts: sun8i: a83t: bananapi-m3: Add
AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed.

With the default setting, dldo3 is regulated at 2.9v which seems
sufficient for the PHY but the aforementioned commit drops it to 2.5V
which is insufficient. Note that this behaviour is random for all BPIM3.
Some work with 2.5V, but some don't.

Finnaly, someone from Bananapi confirmed that this regulator must be set
to 3.3V.

Fixes: d7c5f68635 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813
		      regulator nodes")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[wens@csie.org: Reworked commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-11-14 15:10:57 +08:00
419b194cde ARM: dts: am3517-som: Fix WL127x Wifi interrupt
At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING.  Because they overlapped, this was not
done to the AM3517-EVM.  This patch fixes Kernel 4.19+

Fixes: 6bf5e3410f ("ARM: dts: am3517-som: Add WL127x Wifi")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 09:22:51 -08:00
3d8b804bc5 ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1
The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3aed0 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 09:22:42 -08:00
6809564d64 ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt
When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.

It was subsequently moved, so this patch corrects Kernel
4.18+

Fixes: a388673052 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 09:22:31 -08:00
e7f4ffffa9 ARM: dts: am3517: Fix pinmuxing for CD on MMC1
The MMC1 is active low, not active high.  For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.

Fixes: cfaa856a25 ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-11-08 09:22:10 -08:00
1ad9fb750a ARM: dts: imx6sx-sdb: Fix enet phy regulator
Bindings for "fixed-regulator" only explicitly support "gpio" property,
not "gpios". Fix by correcting the property name.

The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power
cycle, this can be handled by the phy-reset-gpios property. Sadly this
is not handled on suspend: the fec driver turns phy-supply off but
doesn't assert phy-reset-gpios again on resume.

Since additional phy-level work is required to support powering off the
phy in suspend fix the problem by just marking the regulator as
"boot-on" "always-on" so that it's never turned off. This behavior is
equivalent to older releases.

Keep the phy-reset-gpios property on fec anyway because it is a correct
description of board design.

This issue was exposed by commit efdfeb079c ("regulator: fixed:
Convert to use GPIO descriptor only") which causes the "gpios" property
to also be parsed. Before that commit the "gpios" property had no
effect, PHY reset was only handled in the the bootloader.

This fixes linux-next boot failures previously reported here:
 https://lore.kernel.org/patchwork/patch/982437/#1177900
 https://lore.kernel.org/patchwork/patch/994091/#1178304

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05 10:11:04 +08:00
1af6ab3bac ARM: dts: fsl: Fix improperly quoted stdout-path values
A quoted label reference doesn't expand to the node path and is taken as
a literal string. Dropping the quotes can fix this unless the baudrate
string is appended in which case we have to use the alias.

At least on VF610, the problem was masked by setting the console in
bootargs. Use the alias syntax with baudrate parameter so we can drop
setting the console in bootargs.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05 10:09:02 +08:00
438ad09af5 ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
Fix the type of compatible string "fs,imx6sll-i2c" which should be
"fsl,imx6sll-i2c".

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05 10:09:02 +08:00
00a6a845c0 ARM: dts: stm32: update HASH1 dmas property on stm32mp157c
Remove unused parameter from HASH1 dmas property on stm32mp157c SoC.

Fixes: 1e726a40e0 ("ARM: dts: stm32: Add HASH support on stm32mp157c")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
[Olof: Bug doesn't cause any harm, so shouldn't need stable backport]
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02 22:31:25 -07:00
93335e5911 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
 "There are close to 800 indivudal changesets in this branch again,
  which feels like a lot. There are particularly many changes for the
  NVIDIA Tegra platform this time, in fact more than it has seen in the
  two years since the v4.9 merge window. Aside from this, it's been
  fairly normal, with lots of changes going into Renesas R-CAR, NXP
  i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP.

  Most of the changes are for adding new features into existing boards,
  for brevity I'm only mentioning completely new machines and SoCs here.
  For the first time I think we have (slightly) more new 64-bit hardware
  than 32-bit:

  Two boards get added for TI OMAP: Moxa UC-2101 is an industrial
  computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a
  minor variation of the motherboards of the GTA04 phone, see
  https://shop.goldelico.com/wiki.php?page=GTA04A5

  Clearfog is a nice little board for quad-core Marvell Armada 8040
  network processor, see
  https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/

  Two additional server boards come with the Aspeed baseboard management
  controllers: Stardragon4800 is an arm64 reference platform made by HXT
  (based on Qualcomm's server chips), and TiogaPass is an Open Compute
  mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the
  BMC.

  NXP i.MX usually sees a lot of new boards each release. This time
  there we only add one minor variant: ConnectCore 6UL SBC Pro uses the
  same SoM design as the ConnectCore 6UL SBC Express added later.
  However, there is a new chip, the i.MX6ULZ, which is an even smaller
  variant of the i.MX6ULL, with features removed. There is also support
  for the reference board design, the i.MX6ULZ 14x14 EVK.

  A new Raspberry Pi variant gets added, this one is the CM3 compute
  module based on bcm2837, it was launched in early 2017 but only now
  added to the kernel, both as 32-bit and as 64-bit files, as we tend to
  do for Raspberry Pi.

  On the Allwinner side, everything is again about cheap development
  boards, usually of the "Fruit Pi" variety. The new ones this time are:
   - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/
   - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/
   - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts
   - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html
  The last one of these is now a 64-bit version of the earlier Banana Pi
  M2+ H3, with the same board layout.

  Similarly, for Rockchips, get get another variant of the 32-bit Asus
  Tinker board, the model 'S' based on rk3288, and three now boards
  based on the popular RK3399 chip:
   - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/
   - Rock960: https://www.96boards.org/product/rock960/
   - RockPro64: https://www.pine64.org/?page_id=61454
  These are all quite powerful boards with lots of RAM and I/O, and the
  RK3399 is the same chip used in several Chromebooks. Finally, we get
  support for the PX30 (aka rk3326) chip, which is based on the low-end
  64-bit Cortex-A35 CPU core. So far, only the evaluation board is
  supported.

  One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is
  based on the MT7622 WiFi router platform, and the first product I've
  seen with a 64-bit Mediatek chip in that market:
  http://www.banana-pi.org/r64.html

  For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370
  development board, which are similar to the Hi3660 and Hikey 360
  respectively, but add support for an NPU.

  Amlogic gets initial support for the Meson-G12A chip (S905D2), another
  quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit
  side, we gain support for an actual end-user product, the Endless
  Computers Endless Mini based on Meson8b (S805), see
  https://endlessos.com/computers/

  Qualcomm adds support for their MSM8998 SoC and evaluation platform.
  This chip is commonly known as the Snapdragon 835, and is used in
  high-end phones as well as low-end laptops.

  For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added,
  but no boards for this one. However, we do add boards for the
  previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the
  M3NULCB Starter Kit Pro.

  While we have lots of DT changes for NVIDIA to update the existing
  files, the only board that gets added is the Toradex Colibri T20 on
  Colibri Evaluation Board for the old Tegra2.

  Synaptics add support for their AS370 SoC, which is part of the
  (formerly Marvell) Berlin line of set-top-box chips used e.g. in the
  various Google Chromecast. Only the .dtsi gets added at this point, no
  actual machines"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits)
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ...
2018-10-29 15:05:20 -07:00
134bf98c55 Merge tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:

 - new dvb frontend driver: lnbh29

 - new sensor drivers: imx319 and imx 355

 - some old soc_camera driver renames to avoid conflict with new
   drivers

 - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver

 - a new V4L2 frontend for the FWHT codec

 - several other improvements, bug fixes, code cleanups, etc

* tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits)
  media: rename soc_camera I2C drivers
  media: cec: forgot to cancel delayed work
  media: vivid: Support 480p for webcam capture
  media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
  media: vivid: Add 16-bit bayer to format list
  media: v4l2-tpg-core: Add 16-bit bayer
  media: pvrusb2: replace `printk` with `pr_*`
  media: venus: vdec: fix decoded data size
  media: cx231xx: fix potential sign-extension overflow on large shift
  media: dt-bindings: media: rcar_vin: add device tree support for r8a7744
  media: isif: fix a NULL pointer dereference bug
  media: exynos4-is: make const array config_ids static
  media: cx23885: make const array addr_list static
  media: ivtv: make const array addr_list static
  media: bttv-input: make const array addr_list static
  media: cx18: Don't check for address of video_dev
  media: dw9807-vcm: Fix probe error handling
  media: dw9714: Remove useless error message
  media: dw9714: Fix error handling in probe function
  media: cec: name for RC passthrough device does not need 'RC for'
  ...
2018-10-29 14:29:58 -07:00
b27186abb3 Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
2018-10-26 12:09:58 -07:00
bd6bf7c104 Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...
2018-10-25 06:50:48 -07:00
07171da264 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "The main item in this pull request are the Spectre variant 1.1 fixes
  from Julien Thierry.

  A few other patches to improve various areas, and removal of some
  obsolete mcount bits and a redundant kbuild conditional"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8802/1: Call syscall_trace_exit even when system call skipped
  ARM: 8797/1: spectre-v1.1: harden __copy_to_user
  ARM: 8796/1: spectre-v1,v1.1: provide helpers for address sanitization
  ARM: 8795/1: spectre-v1.1: use put_user() for __put_user()
  ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit
  ARM: 8793/1: signal: replace __put_user_error with __put_user
  ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user()
  ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state
  ARM: 8790/1: signal: always use __copy_to_user to save iwmmxt context
  ARM: 8789/1: signal: copy registers using __copy_to_user()
  ARM: 8801/1: makefile: use ARMv3M mode for RiscPC
  ARM: 8800/1: use choice for kernel unwinders
  ARM: 8798/1: remove unnecessary KBUILD_SRC ifeq conditional
  ARM: 8788/1: ftrace: remove old mcount support
  ARM: 8786/1: Debug kernel copy by printing
2018-10-23 19:32:10 +01:00
bab5c80b21 Merge tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Arnd writes:
  "ARM: SoC fixes for 4.19

   Two last minute bugfixes, both for NXP platforms:

   * The Layerscape 'qbman' infrastructure suffers from probe ordering
     bugs in some configurations, a two-patch series adds a hotfix for
     this. 4.20 will have a longer set of patches to rework it.

   * The old imx53-qsb board regressed in 4.19 after the addition
     of cpufreq support, adding a set of explicit operating points
     fixes this."

* tag 'armsoc-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  ARM: dts: imx53-qsb: disable 1.2GHz OPP
2018-10-12 17:41:27 +02:00
be59a3282c Merge tag 'socfpga_updates_for_v4.20_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v4.20, part 3
- Add ethernet aliases for Stratix10
- Move ethernet aliases from socfpga dtsi
- Correct system manager register size for Stratix10
- Correct SDRAM node address for Arria10

* tag 'socfpga_updates_for_v4.20_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  arm64: dts: stratix10: Correct System Manager register size
  ARM: dts: socfpga: Fix SDRAM node address for Arria10

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-11 16:07:07 +02:00
b483792c9e Merge tag 'samsung-dt-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.20, second round

Add proper configuration for Odroid XU SD write-protect pin.

* tag 'samsung-dt-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-11 16:04:13 +02:00
2a44d6511a ARM: dts: socfgpa: remove ethernet aliases from dtsi
Not all boards use two ethernet devices and/or use them in different
order. As almost all in-tree boards already define their own ethernet
aliases, remove them from the dtsi and add the aliases to the two boards,
that are missing their own definition.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[dinguyen@kernel.org: rebased to latest dts changes]
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-10-09 13:40:28 -05:00
2caef763d8 Merge tag 'mvebu-dt-4.20-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.20 (part 2)

Auto-detect nand ECC on the armada-385 based board db-88f6820-amc
instead of hard coded them in the device tree.

* tag 'mvebu-dt-4.20-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 17:28:24 +02:00
3aedf7e135 ARM: dts: imx7d: Add turnoff reset
This is required for the imx pci driver to send the PME_Turn_Off TLP.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
2018-10-05 09:56:37 +01:00
cac0223c46 media: renesas-ceu: Use default mbus settings
As the v4l2-fwnode now allows drivers to set defaults, and eventually
override them by specifying properties in DTS, use defaults for the CEU
driver.

Also remove endpoint properties from the gr-peach-audiocamerashield as
they match the defaults now specified in the driver code
(h/vsync-active and bus-width) or are not relevant to the interface
as they cannot be configured (pclk-sample).

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 16:25:33 -04:00
3f4258bbe0 Merge tag 'soc-fsl-fix-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into fixes
NXP/FSL SoC driver fixes for v4.19 round 2

- Fix crash of qman_portal by deferring its probe if qman is not probed

* tag 'soc-fsl-fix-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qman_portals: defer probe after qman's probe
  soc: fsl: qbman: add APIs to retrieve the probing status
  soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()
  soc: fsl: qbman: qman: avoid allocating from non existing gen_pool
  ARM: dts: BCM63xx: Fix incorrect interrupt specifiers
  MAINTAINERS: update the Annapurna Labs maintainer email
  ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT
  ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 18:01:20 +02:00
5e72f5dc7e ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
This board has a Micron MT29F8G08ABACAWP chip which requires a ECC
strength of 8/512. Rather than hard coding any particular strength the
the nand controller auto-detect the ECC strength based on the ONFI data.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-10-04 17:37:23 +02:00
30a0af8826 Merge tag 'imx-fixes-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.19, round 2:
 - i.MX53 QSB board stops working when cpufreq driver is enabled,
   because the default OPP table has the maximum CPU frequency at
   1.2GHz, while the board is only capable of running 1GHz.  Fix up
   the OPP table for the board to get it work with cpufreq driver.

* tag 'imx-fixes-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx53-qsb: disable 1.2GHz OPP

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 17:34:53 +02:00
38764692af Merge tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
DaVinci DT updates for v4.20
----------------------------
- A non-critical fix to reduce errors on A/DC on Lego Mindstorms EV3
- Support for GPIO expander on DA850 EVM

* tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 17:20:47 +02:00
86dc4eaf12 Merge tag 'uniphier-dt-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.20

- Add more clocks to NAND controller nodes

- Add SPI controller nodes

- Add SD controller nodes

- Add USB 3.0 and its PHY nodes

- Add PHY nodes for USB 2.0

* tag 'uniphier-dt-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: uniphier: add SD controller nodes
  ARM: dts: uniphier: add SD/eMMC controller nodes
  arm64: dts: uniphier: add SPI node for LD20, LD11 and PXs3
  ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCs
  ARM: dts: uniphier: add SPI pin-mux node
  arm64: uniphier: dts: add more clocks to Denali NAND controller node
  ARM: uniphier: dts: add more clocks to Denali NAND controller node

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 17:08:02 +02:00
b9734c59ea Merge tag 'at91-4.20-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/dt
AT91 DT for 4.20 #2

 - fixes NAND size and partitions for some boards

* tag 'at91-4.20-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size
  ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 17:05:54 +02:00
3f8b181eb4 Merge tag 'v4.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt
mt7623:
- add pmu node
- add subsystem clocks
- add nodes needed for iommu
- add node for the jpeg decoder

* tag 'v4.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mt7623: add jpeg decoder device node
  arm: dts: mt7623: add iommu/smi device nodes
  arm: dts: mt7623: update subsystem clock controller device nodes
  arm: dts: mt7623: add a performance counter unit device node

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 16:55:17 +02:00
5140512d5b Merge tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.

* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3288-based Tinker board S
  ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
  ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
  ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
  ARM: dts: rockchip: add rk3188 lcd controller nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 16:41:16 +02:00
aea4762fb4 ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
if we are reading analog values as fast as possible (i.e. using DMA to
service the SPI) the A/DC chip will read incorrect values - as much as
0.1V off when the SPI is running at 10MHz. (This has to do with the
capacitor charge time when channels are muxed in the A/DC.)

This patch slows down the SPI as much as possible (if CPU is at 456MHz,
SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
we could get ~891kHz, but we're just rounding it to 1MHz). We also use
the max allowable value for WDELAY to slow things down even more.

These changes reduce the error of the analog values to about 5mV, which
is tolerable.

Commits a3762b13a5 ("spi: spi-davinci: Add support for SPI_CS_WORD")
and e2540da86e ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") introduce changes that allow DMA transfers to be used, so
this slow down is needed now.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-10-04 20:08:40 +05:30
f5fefa0f7d ARM: dts: da850-evm: Enable tca6416 on baseboard
There is a GPIO expander on both the UI board as well as the
baseboard.  This patch enables the second tca6416 and identifies
it as being on the baseboard using _bb as the suffix.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-10-04 20:06:05 +05:30
f84c933015 Merge tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
More devicetree changes for omap variants

There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.

For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.

For omap5, we enable omap5 USB OTG mode for DWC3 controller.

And we add support for am335x based Moxa UC-2100 series of industrial
computers.

* tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
  ARM: dts: am335x: add support for Moxa UC-2101 open platform
  ARM: dts: am335x: add common file for UC-2100 series
  ARM: dts: omap5: enable OTG role for DWC3 controller
  ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
  ARM: dts: dra7: Fix up unaligned access setting for PCIe EP

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-04 16:14:05 +02:00
8bb2f53203 ARM: dts: uniphier: Add USB2 PHY nodes
Add nodes of USB2 physical layer for UniPhier SoC. This supports Pro4.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04 09:41:05 +09:00
45be1573ad ARM: dts: uniphier: Add USB3 controller nodes
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for Pro4, PXs2 and the boards.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04 09:39:36 +09:00
767466b63d ARM: dts: at91: sama5d4_xplained: even nand memory partitions
sama5d4_xplained, ssam9x5cm, sama5d2_ptc_ek and sama5d3_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our NAND flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2018-10-03 10:26:57 +02:00
0c9ba7a48e ARM: dts: at91: sama5d3_xplained: even nand memory partitions
sama5d3_xplained, sam9x5cm, sama5d2_ptc_ek and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2018-10-03 10:26:57 +02:00