iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
798,727 Commits 104 Branches 1,843 Tags
Commit Graph

4 Commits

Author SHA1 Message Date
Rafał Miłecki
3401d42c7e brcmutil: really fix decoding channel info for 160 MHz bandwidth 
Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.

This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
   Before: chnum:50 control_ch_num:36
    After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
   Before: chnum:114 control_ch_num:100
    After: chnum:114 control_ch_num:120

Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-11-06 18:46:00 +02:00
Arend van Spriel
330994e8e8 brcmfmac: fix for proper support of 160MHz bandwidth 
Decoding of firmware channel information was not complete for 160MHz
support. This resulted in the following warning:

  WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
	brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
  Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
  CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G           O
  4.17.0-wt-testing-x64-00002-gf1bed50 #1
  Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
  Workqueue: events request_firmware_work_func
  RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
  RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206
  RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0
  RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30
  RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80
  R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000
  R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0
  FS:  0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0
  Call Trace:
   brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
   brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
   brcmf_attach+0x1fc/0x4b0 [brcmfmac]
   ? __kmalloc+0x13c/0x1c0
   brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
   brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
   request_firmware_work_func+0x36/0x60
   process_one_work+0x146/0x350
   worker_thread+0x4a/0x3b0
   kthread+0x102/0x140
   ? process_one_work+0x350/0x350
   ? kthread_bind+0x20/0x20
   ret_from_fork+0x35/0x40
  Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
	66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
	0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
  ---[ end trace 550c46682415b26d ]---
  brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50

This patch adds the missing stuff to properly handle this.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2018-09-20 15:09:30 +03:00
Rafał Miłecki
4712d88a57 brcmutil: add field storing control channel to the struct brcmu_chan 
Our d11 code supports encoding/decoding channel info into/from chanspec
format used by firmware. Current implementation is quite misleading
because of the way "chnum" field is used.
When encoding channel info, "chnum" has to be filled by a caller with
*center* channel number. However when decoding chanspec the same field
is filled with a *control* channel number.

1) This can be confusing. It's expected for information to be the same
   after encoding and decoding.
2) It doesn't allow accessing all info when decoding. Some functions may
   need to know both channel numbers, e.g. cfg80211 callback getting
   current channel.
Solve this by adding a separated field for control channel.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2016-06-14 17:27:42 +03:00
Kalle Valo
05491d2ccf brcm80211: move under broadcom vendor directory 
Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
 2015-11-18 11:24:22 +02:00