IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When file handle is embedded inside fanotify_event and usercopy checks
are enabled, we get a warning like:
Bad or missing usercopy whitelist? Kernel memory exposure attempt detected
from SLAB object 'fanotify_event' (offset 40, size 8)!
WARNING: CPU: 1 PID: 7649 at mm/usercopy.c:78 usercopy_warn+0xeb/0x110
mm/usercopy.c:78
Annotate handling in fanotify_event properly to mark copying it to
userspace is fine.
Reported-by: syzbot+2c49971e251e36216d1f@syzkaller.appspotmail.com
Fixes: a8b13aa20afb ("fanotify: enable FAN_REPORT_FID init flag")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Recently we found the audio jack detection stop working after suspend
on many machines with Realtek codec. Sometimes the audio selection
dialogue didn't show up after users plugged headhphone/headset into
the headset jack, sometimes after uses plugged headphone/headset, then
click the sound icon on the upper-right corner of gnome-desktop, it
also showed the speaker rather than the headphone.
The root cause is that before suspend, the codec already call the
runtime_suspend since this codec is not used by any apps, then in
resume, it will not call runtime_resume for this codec. But for some
realtek codec (so far, alc236, alc255 and alc891) with the specific
BIOS, if it doesn't run runtime_resume after suspend, all codec
functions including jack detection stop working anymore.
This problem existed for a long time, but it was not exposed, that is
because when problem happens, if users play sound or open
sound-setting to check audio device, this will trigger calling to
runtime_resume (via snd_hda_power_up), then the codec starts working
again before users notice this problem.
Since we don't know how many codec and BIOS combinations have this
problem, to fix it, let the driver call runtime_resume for all codecs
in pm_resume, maybe for some codecs, this is not needed, but it is
harmless. After a codec is runtime resumed, if it is not used by any
apps, it will be runtime suspended soon and furthermore we don't run
suspend frequently, this change will not add much power consumption.
Fixes: cc72da7d4d06 ("ALSA: hda - Use standard runtime PM for codec power-save control")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 3baffc4a84d7 (ALSA: hda/intel: Refactoring PM code) changed
the behaviour of azx_resume(), it triggers the jackpoll_work after
applying this commit.
This change introduced a new issue, all codecs are runtime active
after S3, and will not call runtime_suspend() automatically.
The root cause is the jackpoll_work calls snd_hda_power_up/down_pm,
and it calls up_pm before snd_hdac_enter_pm is called, while calls
the down_pm in the middle of enter_pm and leave_pm is called. This
makes the dev->power.usage_count unbalanced after S3.
To fix it, let azx_resume() don't trigger jackpoll_work as before
it did.
Fixes: 3baffc4a84d7 ("ALSA: hda/intel: Refactoring PM code")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.
Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
(cherry picked from commit 794a11cb67201ad1bb61af510bb8460280feb3f3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.
Fixes: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
(cherry picked from commit 9073e5b26743b8b675cc44a9c0c8f8c3d584e1c0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.
Fixes: a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
(cherry picked from commit 2131bc0ced6088648e47f126566c3da58b07e4ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that we have alloc_size that controls our discard behavior, it
doesn't make sense to have these set to object (set) size. alloc_size
defaults to 64k, but because discard_granularity is likely 4M, only
ranges that are equal to or bigger than 4M can be considered during
fstrim. A smaller io_min is also more likely to be met, resulting in
fewer deferred writes on bluestore OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Before, ec->data_buffer could be written to from multiple
contexts at the same time. Since the ec is shared data,
it needs to be inside the mutex as well.
Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Several driver bug fixes post in the last three weeks
- First part of a race condition fix in mlx4 with CATAS errors
- Bad interaction with FW causing resource leaks in the mlx5 DCT flow
- Bad reporting of link speed/width in new mlx5 devices
- Userspace triggable OOPs in i40iw
-----BEGIN PGP SIGNATURE-----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=klIw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several driver bug fixes post in the last three weeks
- first part of a race condition fix in mlx4 with CATAS errors
- bad interaction with FW causing resource leaks in the mlx5 DCT flow
- bad reporting of link speed/width in new mlx5 devices
- user triggable OOPS in i40iw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
i40iw: Avoid panic when handling the inetdev event
IB/mlx5: Fix mapping of link-mode to IB width and speed
IB/mlx5: Use mlx5 core to create/destroy a DEVX DCT
net/mlx5: Fix DCT creation bad flow
IB/mlx4: Fix race condition between catas error reset and aliasguid flows
If bio_iov_iter_get_pages() is called on an iov_iter that is flagged
with NO_REF, then we don't need to add a page reference for the pages
that we add.
Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows
not to drop a reference to these pages.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ITER_BVEC, if we're holding on to kernel pages, the caller
doesn't need to grab a reference to the bvec pages, and drop that
same reference on IO completion. This is essentially safe for any
ITER_BVEC, but some use cases end up reusing pages and uncondtionally
dropping a page reference on completion. And example of that is
sendfile(2), that ends up being a splice_in + splice_out on the
pipe pages.
Add a flag that tells us it's fine to not grab a page reference
to the bvec pages, since that caller knows not to drop a reference
when it's done with the pages.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I've seen cases where bulk alloc fails, since the bulk alloc API
is all-or-nothing - either we get the number we ask for, or it
returns 0 as number of entries.
If we fail a batch bulk alloc, retry a "normal" kmem_cache_alloc()
and just use that instead of failing with -EAGAIN.
While in there, ensure we use GFP_KERNEL. That was an oversight in
the original code, when we switched away from GFP_ATOMIC.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The conversion to kvmalloc() forgot to account for the possibility that
p->type_attr_map_array might be null in policydb_destroy().
Fix this by destroying its contents only if it is not NULL.
Also make sure ebitmap_init() is called on all entries before
policydb_destroy() can be called. Right now this is a no-op, because
both kvcalloc() and ebitmap_init() just zero out the whole struct, but
let's rather not rely on a specific implementation.
Reported-by: syzbot+a57b2aff60832666fc28@syzkaller.appspotmail.com
Fixes: acdf52d97f82 ("selinux: convert to kvmalloc")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Make udf_truncate_extents() properly propagate errors to its callers and
let udf_setsize() handle the error properly as well. This lets userspace
know in case there's some error when truncating blocks.
Signed-off-by: Jan Kara <jack@suse.cz>
When truncate(2) hits IO error when reading indirect extent block the
code just bugs with:
kernel BUG at linux-4.15.0/fs/udf/truncate.c:249!
...
Fix the problem by bailing out cleanly in case of IO error.
CC: stable@vger.kernel.org
Reported-by: jean-luc malet <jeanluc.malet@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Implement writeback support for R-Car Gen3 by exposing writeback
connectors. Behind the scene the calls are forwarded to the VSP
backend.
Using writeback connectors will allow implemented writeback support for
R-Car Gen2 with a consistent API if desired.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The rcar_du_vsp_plane_prepare_fb() and rcar_du_vsp_plane_cleanup_fb()
functions implement the DRM plane .prepare_fb() and .cleanup_fb()
operations. They map and unmap the framebuffer to/from the VSP
internally, which will be useful to implement writeback support. Split
the mapping and unmapping out to separate functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The mapping between DRM and V4L2 fourcc's is stored in two separate
tables in rcar_du_vsp.c. In order to make it reusable to implement
writeback support, move it to the rcar_du_format_info structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The rcar_du_crtc structure index field contains the CRTC hardware index,
not the hardware and software index. Update the documentation
accordingly.
Fixes: 5361cc7f8e91 ("drm: rcar-du: Split CRTC handling to support hardware indexing")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
As writeback jobs contain a framebuffer, drivers may need to prepare and
cleanup them the same way they can prepare and cleanup framebuffers for
planes. Add two new optional connector helper operations,
.prepare_writeback_job() and .cleanup_writeback_job() to support this.
The job prepare operation is called from
drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper
that would need to be called by all drivers not using
drm_atomic_helper_commit(). The job cleanup operation is called from the
existing drm_writeback_cleanup_job() function, invoked both when
destroying the job as part of a aborted commit, or when the job
completes.
The drm_writeback_job structure is extended with a priv field to let
drivers store per-job data, such as mappings related to the writeback
framebuffer.
For internal plumbing reasons the drm_writeback_job structure needs to
store a back-pointer to the drm_writeback_connector. To avoid pushing
too much writeback-specific knowledge to drm_atomic_uapi.c, create a
drm_writeback_set_fb() function, move the writeback job setup code
there, and set the connector backpointer. The prepare_signaling()
function doesn't need to allocate writeback jobs and can ignore
connectors without a job, as it is called after the writeback jobs are
allocated to store framebuffers, and a writeback fence with a
framebuffer is an invalid configuration that gets rejected by the commit
check.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Writeback jobs are allocated when the WRITEBACK_FB_ID is set, and
deleted when the jobs complete. This results in both a memory leak of
the job and a leak of the framebuffer if the atomic commit returns
before the job is queued for processing, for instance if the atomic
check fails or if the commit runs in test-only mode.
Fix this by implementing the drm_writeback_cleanup_job() function and
calling it from __drm_atomic_helper_connector_destroy_state(). As
writeback jobs are removed from the state when they're queued for
processing, any job left in the state when the state gets destroyed
needs to be cleaned up.
The existing declaration of the drm_writeback_cleanup_job() function
without an implementation hints that this problem was considered, but
never addressed.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
The drm_writeback_queue_job() function takes ownership of the passed job
and requires the caller to manually set the connector state
writeback_job pointer to NULL. To simplify drivers and avoid errors
(such as the missing NULL set in the vc4 driver), pass the connector
state pointer to the function instead of the job pointer, and set the
writeback_job pointer to NULL internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Extend the vsp1_du_atomic_flush() API with writeback support by adding
format, pitch and memory addresses of the writeback framebuffer.
Writeback completion is reported through the existing frame completion
callback with a new VSP1_DU_STATUS_WRITEBACK status flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VSP1 driver will need to pass extra flags to the DU through the
frame completion API. Replace the completed bool flag by a bitmask to
support this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The code that initializes the RPF format-related fields for display
pipelines will also be useful for the WPF to implement writeback
support. Split it from vsp1_du_atomic_update() to a new
vsp1_du_pipeline_set_rwpf_format() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the writeback feature of the WPF, to enable capturing
frames at the WPF output for display pipelines. To enable writeback the
vsp1_rwpf structure mem field must be set to the address of the
writeback buffer and the writeback field set to true before the WPF
.configure_stream() and .configure_partition() are called. The WPF will
enable writeback in the display list for a single frame, and writeback
will then be automatically disabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Refactor the display list header setup to allow chained display lists
with display pipelines. Chain the display lists as for mem-to-mem
pipelines, but enable the frame end interrupt for every list as display
pipelines have a single list per frame.
This feature will be used to disable writeback exactly one frame after
enabling it by chaining a writeback disable display list.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The WPF needs access to the current display list to configure writeback.
Add a display list pointer to the VSP1 entity .configure_stream()
operation.
Only display pipelines can make use of the display list there as
mem-to-mem pipelines don't have access to a display list at stream
configuration time. This is not an issue as writeback is only used for
display pipelines.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To prepare for addition of more flags to the display list, replace the
'internal' flag field by a bitmask 'flags' field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VSP-DL instances have two LIFs, and thus two copies of the
VI6_DISP_IRQ_ENB, VI6_DISP_IRQ_STA and VI6_WPF_WRBCK_CTRL registers. Fix
the corresponding macros accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Display list fragments have been renamed to bodies. Replace one last
occurrence of the word fragment in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When configuring partitions for memory-to-memory pipelines, the WPF
accesses data of the current partition through pipe->partition.
Writeback support will require full configuration of the WPF while not
providing a valid pipe->partition. Rework the configuration code to fall
back to the full image width in that case, as is already done for the
part of the configuration currently relevant for display pipelines.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This reverts commit 3299ba5c0b21 ("[media] v4l: vsp1: Supply frames to
the DU continuously")
The DU output mode does not rely on frames being supplied on the WPF as
its pipeline is supplied from DRM. For the upcoming WPF writeback
functionality, we will choose to enable writeback mode if there is an
output buffer, or disable it (leaving the existing display pipeline
unharmed) otherwise.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
kthread name only allows 15 characters (TASK_COMMON_LEN is 16).
Thus rename the kthreads created by intel_powerclamp driver from
"kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid"
to avoid truncated kthead name for cpu 100 and later.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The mtk_thermal struct contains a 'struct mtk_thermal_bank banks[];',
but the allocation only allocates sizeof(struct mtk_thermal) bytes,
which cause out of bound access with the ->banks[] member. Change it to
a fixed size array instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Commit 758a58d0bc67 ("loop: set GENHD_FL_NO_PART_SCAN after
blkdev_reread_part()") separates "lo->lo_backing_file = NULL" and
"lo->lo_state = Lo_unbound" into different critical regions protected by
loop_ctl_mutex.
However, there is below race that the NULL lo->lo_backing_file would be
accessed when the backend of a loop is another loop device, e.g., loop0's
backend is a file, while loop1's backend is loop0.
loop0's backend is file loop1's backend is loop0
__loop_clr_fd()
mutex_lock(&loop_ctl_mutex);
lo->lo_backing_file = NULL; --> set to NULL
mutex_unlock(&loop_ctl_mutex);
loop_set_fd()
mutex_lock_killable(&loop_ctl_mutex);
loop_validate_file()
f = l->lo_backing_file; --> NULL
access if loop0 is not Lo_unbound
mutex_lock(&loop_ctl_mutex);
lo->lo_state = Lo_unbound;
mutex_unlock(&loop_ctl_mutex);
lo->lo_backing_file should be accessed only when the loop device is
Lo_bound.
In fact, the problem has been introduced already in commit 7ccd0791d985
("loop: Push loop_ctl_mutex down into loop_clr_fd()") after which
loop_validate_file() could see devices in Lo_rundown state with which it
did not count. It was harmless at that point but still.
Fixes: 7ccd0791d985 ("loop: Push loop_ctl_mutex down into loop_clr_fd()")
Reported-by: syzbot+9bdc1adc1c55e7fe765b@syzkaller.appspotmail.com
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let blk_mq_mark_tag_wait() use the blk_mq_sched_mark_restart_hctx()
to set BLK_MQ_S_SCHED_RESTART.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
int3400 only pushes the UUID into the firmware when the mode is flipped
to "enable". The current code only exposes the mode flag if the firmware
supports the PASSIVE_1 UUID, which not all machines do. Remove the
restriction.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Add more supported DPTF policies than the driver currently exposes.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Nisha Aram <nisha.aram@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.
Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Merge commit 19785cf93b6c ("Merge branch 'linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce
severity of too early temperature read"). Restore the original code from
the mentioned commit to finally fix the warning message during boot:
thermal thermal_zone0: failed to read out thermal zone (-22)
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...
But this variable not used like so but as a pointer to a percpu
struct powerclamp_worker_data.
So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;
This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
494:49: warning: incorrect type in initializer (different address spaces)
494:49: expected void const [noderef] <asn:3> *__vpp_verify
494:49: got struct powerclamp_worker_data *
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver allocates queues for all the units it potentially
supports. But if we fail to detect any drives, then we fail
loading the module without cleaning up those queues. This is
now evident with the switch to blk-mq, though the bug has
been there forever as far as I can tell.
Also fix cleanup through regular module exit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not only the 603 but all 6xx need SPRN_SPRG_PGDIR to be initialised at
startup. This patch move it from __setup_cpu_603() to start_here()
and __secondary_start(), close to the initialisation of SPRN_THREAD.
Previously, virt addr of PGDIR was retrieved from thread struct.
Now that it is the phys addr which is stored in SPRN_SPRG_PGDIR,
hash_page() shall not convert it to phys anymore.
This patch removes the conversion.
Fixes: 93c4a162b014 ("powerpc/6xx: Store PGDIR physical address in a SPRG")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function snd_opl3_drum_switch declaration in the header file
has the order of the two arguments on_off and vel swapped when
compared to the definition arguments of vel and on_off. Fix this
by swapping them around to match the definition.
This error predates the git history, so no idea when this error
was introduced.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
