IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since CONFIG_FS_VERITY is a bool, not a tristate, fs/verity/ can only be
builtin or absent entirely; it can't be a loadable module. Therefore,
the error code that gets returned from the fsverity_init() initcall is
never used. If any part of the initcall does fail, which should never
happen, the kernel will be left in a bad state.
Following the usual convention for builtin code, just panic the kernel
if any of part of the initcall fails.
Link: https://lore.kernel.org/r/20230705212743.42180-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Clean up the error handling in verify_data_block() to (a) eliminate the
'err' variable which has caused some confusion because the function
actually returns a bool, (b) reduce the compiled code size slightly, and
(c) execute one fewer branch in the success case.
Link: https://lore.kernel.org/r/20230604022312.48532-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
bio_first_page_all(bio)->mapping->host is not compatible with large
folios, since the first page of the bio is not necessarily the head page
of the folio, and therefore it might not have the mapping pointer set.
Therefore, move the dereference of ->mapping->host into
verify_data_blocks(), which works with a folio.
(Like the commit that this Fixes, this hasn't actually been tested with
large folios yet, since the filesystems that use fs/verity/ don't
support that yet. But based on code review, I think this is needed.)
Fixes: 5d0f0e57ed ("fsverity: support verifying data from large folios")
Link: https://lore.kernel.org/r/20230604022101.48342-1-ebiggers@kernel.org
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
The "ahash" API, like the other scatterlist-based crypto APIs such as
"skcipher", comes with some well-known limitations. First, it can't
easily be used with vmalloc addresses. Second, the request struct can't
be allocated on the stack. This adds complexity and a possible failure
point that needs to be worked around, e.g. using a mempool.
The only benefit of ahash over "shash" is that ahash is needed to access
traditional memory-to-memory crypto accelerators, i.e. drivers/crypto/.
However, this style of crypto acceleration has largely fallen out of
favor and been superseded by CPU-based acceleration or inline crypto
engines. Also, ahash needs to be used asynchronously to take full
advantage of such hardware, but fs/verity/ has never done this.
On all systems that aren't actually using one of these ahash-only crypto
accelerators, ahash just adds unnecessary overhead as it sits between
the user and the underlying shash algorithms.
Also, XFS is planned to cache fsverity Merkle tree blocks in the
existing XFS buffer cache. As a result, it will be possible for a
single Merkle tree block to be split across discontiguous pages
(https://lore.kernel.org/r/20230405233753.GU3223426@dread.disaster.area).
This data will need to be hashed. It is easiest to work with a vmapped
address in this case. However, ahash is incompatible with this.
Therefore, let's convert fs/verity/ from ahash to shash. This
simplifies the code, and it should also slightly improve performance for
everyone who wasn't actually using one of these ahash-only crypto
accelerators, i.e. almost everyone (or maybe even everyone)!
Link: https://lore.kernel.org/r/20230516052306.99600-1-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
WQ_UNBOUND causes significant scheduler latency on ARM64/Android. This
is problematic for latency sensitive workloads, like I/O
post-processing.
Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].
This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.
Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us
[1]: https://lore.kernel.org/all/20230202012348.885402-1-nhuck@google.com/
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 8a1d0f9cac ("fs-verity: add data verification hooks for ->readpages()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230310193325.620493-1-nhuck@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Try to make fs/verity/verify.c aware of large folios. This includes
making fsverity_verify_bio() support the case where the bio contains
large folios, and adding a function fsverity_verify_folio() which is the
equivalent of fsverity_verify_page().
There's no way to actually test this with large folios yet, but I've
tested that this doesn't cause any regressions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230127221529.299560-1-ebiggers@kernel.org
Add support for verifying data from verity files whose Merkle tree block
size is less than the page size. The main use case for this is to allow
a single Merkle tree block size to be used across all systems, so that
only one set of fsverity file digests and signatures is needed.
To do this, eliminate various assumptions that the Merkle tree block
size and the page size are the same:
- Make fsverity_verify_page() a wrapper around a new function
fsverity_verify_blocks() which verifies one or more blocks in a page.
- When a Merkle tree block is needed, get the corresponding page and
only verify and use the needed portion. (The Merkle tree continues to
be read and cached in page-sized chunks; that doesn't need to change.)
- When the Merkle tree block size and page size differ, use a bitmap
fsverity_info::hash_block_verified to keep track of which Merkle tree
blocks have been verified, as PageChecked cannot be used directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-7-ebiggers@kernel.org
In preparation for allowing the Merkle tree block size to differ from
PAGE_SIZE, replace fsverity_hash_page() with fsverity_hash_block(). The
new function is similar to the old one, but it operates on the block at
the given offset in the page instead of on the full page.
(For now, all callers still pass a full page.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-6-ebiggers@kernel.org
Add log_digestsize to struct merkle_tree_params so that it can be used
in verify.c. Also save memory by using u8 for all the log_* fields.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-4-ebiggers@kernel.org
First, calculate max_ra_pages more efficiently by using the bio size.
Second, calculate the number of readahead pages from the hash page
index, instead of calculating it ahead of time using the data page
index. This ends up being a bit simpler, especially since level 0 is
last in the tree, so we can just limit the readahead to the tree size.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20221223203638.41293-3-ebiggers@kernel.org
I've gotten very little use out of these debug messages, and I'm not
aware of anyone else having used them.
Indeed, sprinkling pr_debug around is not really a best practice these
days, especially for filesystem code. Tracepoints are used instead.
Let's just remove these and start from a clean slate.
This change does not affect info, warning, and error messages.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221215060420.60692-1-ebiggers@kernel.org
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track verity errors. Instead, if a
verity error occurs, just mark the whole bio as failed. The coarser
granularity isn't really a problem since it isn't any worse than what
the block layer provides, and errors from a multi-page readahead aren't
reported to applications unless a single-page read fails too.
f2fs supports compression, which makes the f2fs changes a bit more
complicated than desired, but the basic premise still works.
Note: there are still a few uses of PageError in f2fs, but they are on
the write path, so they are unrelated and this patch doesn't touch them.
Reviewed-by: Chao Yu <chao@kernel.org>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221129070401.156114-1-ebiggers@kernel.org
Replace extract_hash() with the memcpy_from_page() helper function.
This is simpler, and it has the side effect of replacing the use of
kmap_atomic() with its recommended replacement kmap_local_page().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220818223903.43710-1-ebiggers@kernel.org
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Embedding the file path inside kernel source code files isn't
particularly useful as often files are moved around and the paths become
incorrect. checkpatch.pl warns about this since v5.10-rc1.
Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Fix all kerneldoc warnings in fs/verity/ and include/linux/fsverity.h.
Most of these were due to missing documentation for function parameters.
Detected with:
scripts/kernel-doc -v -none fs/verity/*.{c,h} include/linux/fsverity.h
This cleanup makes it possible to check new patches for kerneldoc
warnings without having to filter out all the existing ones.
Link: https://lore.kernel.org/r/20200511192118.71427-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
When initializing an fs-verity hash algorithm, also initialize a mempool
that contains a single preallocated hash request object. Then replace
the direct calls to ahash_request_alloc() and ahash_request_free() with
allocating and freeing from this mempool.
This eliminates the possibility of the allocation failing, which is
desirable for the I/O path.
This doesn't cause deadlocks because there's no case where multiple hash
requests are needed at a time to make forward progress.
Link: https://lore.kernel.org/r/20191231175545.20709-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
When fs-verity verifies data pages, currently it reads each Merkle tree
page synchronously using read_mapping_page().
Therefore, when the Merkle tree pages aren't already cached, fs-verity
causes an extra 4 KiB I/O request for every 512 KiB of data (assuming
that the Merkle tree uses SHA-256 and 4 KiB blocks). This results in
more I/O requests and performance loss than is strictly necessary.
Therefore, implement readahead of the Merkle tree pages.
For simplicity, we take advantage of the fact that the kernel already
does readahead of the file's *data*, just like it does for any other
file. Due to this, we don't really need a separate readahead state
(struct file_ra_state) just for the Merkle tree, but rather we just need
to piggy-back on the existing data readahead requests.
We also only really need to bother with the first level of the Merkle
tree, since the usual fan-out factor is 128, so normally over 99% of
Merkle tree I/O requests are for the first level.
Therefore, make fsverity_verify_bio() enable readahead of the first
Merkle tree level, for up to 1/4 the number of pages in the bio, when it
sees that the REQ_RAHEAD flag is set on the bio. The readahead size is
then passed down to ->read_merkle_tree_page() for the filesystem to
(optionally) implement if it sees that the requested page is uncached.
While we're at it, also make build_merkle_tree_level() set the Merkle
tree readahead size, since it's easy to do there.
However, for now don't set the readahead size in fsverity_verify_page(),
since currently it's only used to verify holes on ext4 and f2fs, and it
would need parameters added to know how much to read ahead.
This patch significantly improves fs-verity sequential read performance.
Some quick benchmarks with 'cat'-ing a 250MB file after dropping caches:
On an ARM64 phone (using sha256-ce):
Before: 217 MB/s
After: 263 MB/s
(compare to sha256sum of non-verity file: 357 MB/s)
In an x86_64 VM (using sha256-avx2):
Before: 173 MB/s
After: 215 MB/s
(compare to sha256sum of non-verity file: 223 MB/s)
Link: https://lore.kernel.org/r/20200106205533.137005-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
To meet some users' needs, add optional support for having fs-verity
handle a portion of the authentication policy in the kernel. An
".fs-verity" keyring is created to which X.509 certificates can be
added; then a sysctl 'fs.verity.require_signatures' can be set to cause
the kernel to enforce that all fs-verity files contain a signature of
their file measurement by a key in this keyring.
See the "Built-in signature verification" section of
Documentation/filesystems/fsverity.rst for the full documentation.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree. These will be called
from filesystems' ->readpage() and ->readpages() methods.
Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.
See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
