IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This takes up two more ring buffer entries per rectangle blitted but makes sure
the blit is performed top to bottom, reducing the likelyhood of tearing.
Signed-off-by: Dave Airlie <airlied@linux.ie>
The overflows could cause valid offsets to get rejected under some
circumstances, e.g. when the framebuffer resides at the very end of the card's
address space.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Freedesktop.org bug #8246
The domain changes regressed on PPC, go back to just using 0,
as X.org's domain support is crap
Signed-off-by: Dave Airlie <airlied@linux.ie>
Frederik Deweerdt <deweerdt@free.fr> noticed some badness in setversion
returns, however just making it work, breaks things... this code is hairy
with backwards compat...
Signed-off-by: Dave Airlie <airlied@linux.ie>
this applies some minor cleanups for the radeon driver, to use the
3D flush and reset the AGP flags on X recycle
Signed-off-by: Dave Airlie <airlied@linux.ie>
This patch contains the following cleanups:
- make 3 needlessly global functions static
- sis_mm.c: fix compile warnings with CONFIG_FB_SIS=y
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>
First warning result from open-coded PTR_ERR,
the rest is caused by code like this:
*(u32 *) ((u32) buf_priv->kernel_virtual + used)
I've also fixed a missing PTR_ERR in i830_dma.c
Signed-off-by: Dave Airlie <airlied@linux.ie>
Thanks to Andrew Morton for pointing these out, I've fixed a few his patch
missed.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
This is a patch prepared by Guangdeng Liao based off of Tungsten Graphics's
final code drop.
From: Alan Hourihane <alanh@tungstengraphics.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
Keep hashed user tokens, with the following changes:
32-bit physical device addresses are mapped directly to user-tokens. No
duplicate maps are allowed, and the addresses are assumed to be outside
of the range 0x10000000 through 0x30000000. The user-token is identical
to the 32-bit physical start-address of the map.
64-bit physical device addressed are mapped to user-tokens in the range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Other map types, like upcoming TTM maps are mapped to user-tokens in the
range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Implement hashed map lookups.
Signed-off-by: Dave Airlie <airlied@linux.ie>
This add support to the SiS and VIA drivers for the simple memory manager.
This fixes a lot of problems with the current simple code these drivers used,
including locking and SMP issues.
Signed-off-by: Dave Airlie <airlied@linux.ie>
This adds the DRM hashtable and simple memory manager implementations from
Tungsten Graphics, this is NOT the new memory manager, this is a replacement
for the SIS and VIA memory managers.
Signed-off-by: Dave Airlie <airlied@linux.ie>
When writeback isn't used, actually disable it in the hardware.
Not doing this might waste bus bandwidth or even cause memory corruption or
system crashes on systems that check bus transfers. No such incident has been
reported though.
Signed-off-by: Dave Airlie <airlied@linux.ie>
When this succeeds, userspace can read the scratch register contents from th mapped writeback page directly.
Signed-off-by: Dave Airlie <airlied@linux.ie>
This patch removes the pci_domain from the DRM device structure, and
gets it via a macro that either asks the platform or does the alpha special
case. jgarzik asked for this to just use the platform magic, but I've no
alpha experience and I'd rather not just break it and wait for someone to
give out.
Signed-off-by: Dave Airlie <airlied@linux.ie>
This patch removes some of the old compatibility macros from the DRM,
and removes use of DRM wrappers from Linux specific code.
Signed-off-by: Dave Airlie <airlied@linux.ie>
If one of the OEM flags becomes set in the flags from the hardware, the
driver could hang if no OEM handler was set. Fix the code to handle this.
This was tested by setting the flags by hand after they were fetched.
Signed-off-by: Corey Minyard <minyard@acm.org>
Ackde-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When the ipmi_si module is loaded on a system without any ipmi device, it
fails with nodev. It would be fine if all resources were freed. A call to
device_unregister() is missing, resulting to a oops when you remove the
ipmi_msghandler.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Acked-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
No other tty driver will print on the console when the open of it fails.
On systems that happen to be configured for both ttyS0 and hvc0 console,
this will keep flooding the console output. This is most likely to
happen with systems booted between with and without hypervisor from the
same filesystem.
Let's just remove it. When it's really needed (i.e. when the open fails
and someone is trying to debug it), noone will see the output anyway. And
init will report the opens failing in due time through the syslog.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Ryan S. Arnold <rsa@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Sometimes the logic to handle AGPx8->AGPx4 fallback failed, as can
be seen in https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=197346
The failures occured if the bridge was in AGPx8 mode, but the
user hadn't specified a mode in their X config. We weren't
setting the mode to the highest mode capable by the video card+bridge
(as we do in the AGPv2 case), which was leading to all kinds of
mayhem including us believing that after falling back from AGPx8, that
we couldn't do x4 mode (which is disastrous in AGPv3, as those are
the only two modes possible).
Signed-off-by: Dave Jones <davej@redhat.com>
