IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Most LoongArch 64 machines are using custom "SADR" ACPI extension to
perform ACPI S3 sleep. However the standard ACPI way to perform sleep
is to write a value to ACPI PM1/SLEEP_CTL register, and this is never
supported properly in kernel.
Add standard S3 sleep by providing a default DoSuspend function which
calls ACPI's acpi_enter_sleep_state() routine when SADR is not provided
by the firmware.
Also fix suspend assembly code so that ra is set properly before go
into sleep routine. (Previously linked address of jirl was set to a0,
some firmware do require return address in a0 but it's already set with
la.pcrel before).
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add architectural preparation for CPUFreq driver, including: Kconfig,
register definition and platform device registration.
Some of LoongArch processors support DVFS, their IOCSR.FEATURES has
IOCSRF_FREQSCALE set. And they has a micro-core in the package called
SMC (System Management Controller) to scale frequency, voltage, etc.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ARCH_HAS_DEBUG_VM_PGTABLE selection in Kconfig, in order to make
corresponding vm debug features usable on LoongArch. Also update the
corresponding arch-support.txt document.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX().
In order to avoid triggering stack canaries (due to __builtin_alloca())
and slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_syscall() at function level.
With this patch, the REPORT_STACK test show that:
`loongarch64 bits of stack entropy: 7`
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add irq_work support for LoongArch via self IPIs. This make it possible
to run works in hardware interrupt context, which is a prerequisite for
NOHZ_FULL.
Implement:
- arch_irq_work_raise()
- arch_irq_work_has_interrupt()
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some drivers want to use cpu_logical_map(), early_cpu_to_node() and some
other CPU mapping APIs, even if we use "nr_cpus=1" to hard limit the CPU
number. This is strongly required for the multi-bridges machines.
Currently, we stop parsing the MADT if the nr_cpus limit is reached, but
to achieve the above goal we should always enumerate the MADT table and
setup logical-physical CPU mapping whether there is a nr_cpus limit.
Rework the MADT enumeration:
1. Define a flag "cpu_enumerated" to distinguish the first enumeration
(cpu_enumerated=0) and the physical hotplug case (cpu_enumerated=1)
for set_processor_mask().
2. If cpu_enumerated=0, stop parsing only when NR_CPUS limit is reached,
so we can setup logical-physical CPU mapping; if cpu_enumerated=1,
stop parsing when nr_cpu_ids limit is reached, so we can avoid some
runtime bugs. Once logical-physical CPU mapping is setup, we will let
cpu_enumerated=1.
3. Use find_first_zero_bit() instead of cpumask_next_zero() to find the
next zero bit (free logical CPU id) in the cpu_present_mask, because
cpumask_next_zero() will stop at nr_cpu_ids.
4. Only touch cpu_possible_mask if cpu_enumerated=0, this is in order to
avoid some potential crashes, because cpu_possible_mask is marked as
__ro_after_init.
5. In prefill_possible_map(), clear cpu_present_mask bits greater than
nr_cpu_ids, in order to avoid a CPU be "present" but not "possible".
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Chromium sandbox apparently wants to deny statx [1] so it could properly
inspect arguments after the sandboxed process later falls back to fstat.
Because there's currently not a "fd-only" version of statx, so that the
sandbox has no way to ensure the path argument is empty without being
able to peek into the sandboxed process's memory. For architectures able
to do newfstatat though, glibc falls back to newfstatat after getting
-ENOSYS for statx, then the respective SIGSYS handler [2] takes care of
inspecting the path argument, transforming allowed newfstatat's into
fstat instead which is allowed and has the same type of return value.
But, as LoongArch is the first architecture to not have fstat nor
newfstatat, the LoongArch glibc does not attempt falling back at all
when it gets -ENOSYS for statx -- and you see the problem there!
Actually, back when the LoongArch port was under review, people were
aware of the same problem with sandboxing clone3 [3], so clone was
eventually kept. Unfortunately it seemed at that time no one had noticed
statx, so besides restoring fstat/newfstatat to LoongArch uapi (and
postponing the problem further), it seems inevitable that we would need
to tackle seccomp deep argument inspection.
However, this is obviously a decision that shouldn't be taken lightly,
so we just restore fstat/newfstatat by defining __ARCH_WANT_NEW_STAT
in unistd.h. This is the simplest solution for now, and so we hope the
community will tackle the long-standing problem of seccomp deep argument
inspection in the future [4][5].
Also add "newstat" to syscall_abis_64 in Makefile.syscalls due to
upstream asm-generic changes.
More infomation please reading this thread [6].
[1] https://chromium-review.googlesource.com/c/chromium/src/+/2823150
[2] https://chromium.googlesource.com/chromium/src/sandbox/+/c085b51940bd/linux/seccomp-bpf-helpers/sigsys_handlers.cc#355
[3] https://lore.kernel.org/linux-arch/20220511211231.GG7074@brightrain.aerifal.cx/
[4] https://lwn.net/Articles/799557/
[5] https://lpc.events/event/4/contributions/560/attachments/397/640/deep-arg-inspection.pdf
[6] https://lore.kernel.org/loongarch/20240226-granit-seilschaft-eccc2433014d@brauner/T/#t
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The Freescale MXC driver has been converted to the newer ->exec_op()
interface. The meson driver now supports handling the boot ROM area with
very specific ECC needs. Support for the iMX8QXP has been added to the
GPMI driver. The lpx32xx driver now can get the DMA channels using DT
entries. The Qcom binding has been improved to be more future proof by
Rob. And then there is the usual load of misc and minor changes.
SPI-NAND changes:
The Macronix vendor driver has been improved to support an extended ID
to avoid conflicting with older devices after an ID reuse issue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmaXhAIACgkQJWrqGEe9
VoR9vAf+LWt1BIHrvvdIkcjGwZ18ZebPZn5q/cEWjCly3uHsqQUz5BpJUlMJ0ekK
3DDIw6QCzWDAw4ZmlDdoNMEesWXKSkYKZeV8LwmWqS2203bZL83FjB5vsVkzUKiV
jl00dh57kl2JEehGzluNEMYZrolPPO4CJd8beE8eVED04JFo4jJdjCL1epYWe8Z7
tsiwfevU11cN7wMSwTgf9L5nsx+CEMtT9hP9WNFNw1zVtLeffzJ9RqhNIvdnYCm8
IFuuyRdOz1YC0dMf74r7HTnuWeJkKQL5ibixLsMRz9UR/LgGdQvxkrqWIijjL2NF
6fkIgzkp7Z7bSEgmpy6IwYucaOHvfA==
=Fu3X
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.11' into mtd/next
Raw NAND changes;
The Freescale MXC driver has been converted to the newer ->exec_op()
interface. The meson driver now supports handling the boot ROM area with
very specific ECC needs. Support for the iMX8QXP has been added to the
GPMI driver. The lpx32xx driver now can get the DMA channels using DT
entries. The Qcom binding has been improved to be more future proof by
Rob. And then there is the usual load of misc and minor changes.
SPI-NAND changes:
The Macronix vendor driver has been improved to support an extended ID
to avoid conflicting with older devices after an ID reuse issue.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Notable changes:
- Drop support for Xilinx S3AN flashes. These flashes are for the very
old Xilinx Spartan 3 FPGAs and they need some awkward code in the core
to support. Drop support for these flashes, along with the special
handling we needed for them in the core like non-power-of-2 page size
handling and the .setup() callback.
- Fix regression for old w25q128 flashes without SFDP tables. Commit
83e824a4a595 ("mtd: spi-nor: Correct flags for Winbond w25q128")
dropped support for such devices under the assumption that they aren't
being used anymore. Users have now surfaced [0] so fix the regression
by supporting both kind of devices.
- Core cleanups including removal of SPI_NOR_NO_FR flag and
simplification of spi_nor_get_flash_info().
[0] https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZof+ARQccHJhdHl1c2hA
a2VybmVsLm9yZwAKCRAR4drqP028CXUMAP0X017MY1aWJfUzxNHhhMm23tUtSV5i
Xl1+Hj42oG1AewEAtJ8vOSYwhtPJQ53LQvXqj80HHa5cPx5H5X/vT6okcwU=
=i+Uo
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.11' into mtd/next
SPI NOR changes for 6.11
Notable changes:
- Drop support for Xilinx S3AN flashes. These flashes are for the very
old Xilinx Spartan 3 FPGAs and they need some awkward code in the core
to support. Drop support for these flashes, along with the special
handling we needed for them in the core like non-power-of-2 page size
handling and the .setup() callback.
- Fix regression for old w25q128 flashes without SFDP tables. Commit
83e824a4a595 ("mtd: spi-nor: Correct flags for Winbond w25q128")
dropped support for such devices under the assumption that they aren't
being used anymore. Users have now surfaced [0] so fix the regression
by supporting both kind of devices.
- Core cleanups including removal of SPI_NOR_NO_FR flag and
simplification of spi_nor_get_flash_info().
[0] https://lore.kernel.org/r/CALxbwRo_-9CaJmt7r7ELgu+vOcgk=xZcGHobnKf=oT2=u4d4aA@mail.gmail.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
- Remove support for 40x CPUs & platforms.
- Add support to the 64-bit BPF JIT for cpu v4 instructions.
- Fix PCI hotplug driver crash on powernv.
- Fix doorbell emulation for KVM on PAPR guests (nestedv2).
- Fix KVM nested guest handling of some less used SPRs.
- Online NUMA nodes with no CPU/memory if they have a PCI device attached.
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels.
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE.
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King,
Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani,
Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski,
Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm),
Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy
Pearson, Uwe Kleine-König, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=eHVd
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Remove support for 40x CPUs & platforms
- Add support to the 64-bit BPF JIT for cpu v4 instructions
- Fix PCI hotplug driver crash on powernv
- Fix doorbell emulation for KVM on PAPR guests (nestedv2)
- Fix KVM nested guest handling of some less used SPRs
- Online NUMA nodes with no CPU/memory if they have a PCI device
attached
- Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels
- Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE
Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian
King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra,
Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna
Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler,
Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat,
Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and
Vaibhav Jain.
* tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits)
Documentation/powerpc: Mention 40x is removed
powerpc: Remove 40x leftovers
macintosh/therm_windtunnel: fix module unload.
powerpc: Check only single values are passed to CPU/MMU feature checks
powerpc/xmon: Fix disassembly CPU feature checks
powerpc: Drop clang workaround for builtin constant checks
powerpc64/bpf: jit support for signed division and modulo
powerpc64/bpf: jit support for sign extended mov
powerpc64/bpf: jit support for sign extended load
powerpc64/bpf: jit support for unconditional byte swap
powerpc64/bpf: jit support for 32bit offset jmp instruction
powerpc/pci: Hotplug driver bridge support
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC
powerpc: add missing MODULE_DESCRIPTION() macros
macintosh/mac_hid: add MODULE_DESCRIPTION()
KVM: PPC: add missing MODULE_DESCRIPTION() macros
powerpc/kexec: Use of_property_read_reg()
powerpc/64s/radix/kfence: map __kfence_pool at page granularity
powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API
...
-----BEGIN PGP SIGNATURE-----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=vw2i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), which caused a 45-second boot delay (Siddharth
Vadapalli)
Xilinx Versal CPM PCIe controller driver:
- Fix overlapping bridge registers and 32-bit BAR addresses in DT
binding (Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Make struct switchtec_class constant (Greg Kroah-Hartman)
Miscellaneous:
- Remove unused struct acpi_handle_node (Dr. David Alan Gilbert)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)"
* tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits)
PCI: loongson: Enable MSI in LS7A Root Complex
PCI: Extend ACS configurability
PCI: Add missing bridge lock to pci_bus_lock()
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: vmd: Create domain symlink before pci_bus_add_devices()
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
...
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard"
and "__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors
from the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZpWmqQAKCRBAj56VGEWX
nE00AQDsikkxIpF5GJo3mhHLHQc5noEB/zwwLNTqEmV/ThdffwD/bQmr0C0M1dhz
fOM9NqeyhwKkgGd389AIzv/dV7KIGwI=
=rQCl
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- streamlined logic in input core for handling normal input handlers vs
input filters
- updates to input drivers to allocate memory with sizeof(*pointer)
instead of sizeof(type)
- change to ads7846 touchscreen driver to use hsync GPIO instead of
requiring platform data with special method (which is not compatible
with boards using device tree)
- update to adc-joystick driver to handle inverted axes
- cleanups in various drivers switching them to use the new "guard" and
"__free()" facilities
- changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
omap-keypad, yealink) to stop creating driver-specific device
attributes manually and use driver core facilities for this
- update to Cypress PS/2 protocol driver to properly handle errors from
the PS/2 transport as well as other cleanups
- update to edt-ft5x06 driver to support ft5426 variant
- update to ektf2127 driver to support ektf2232 variant
- update to exc3000 driver to support EXC81W32 variant
- update to imagis driver to support IST3038 variant
- other assorted driver cleanups.
* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
Input: yealink - simplify locking in sysfs attribute handling
Input: yealink - use driver core to instantiate device attributes
Input: ati-remote2 - use driver core to instantiate device attributes
Input: omap-keypad - use driver core to instantiate device attributes
Input: atmel_mxt_ts - use driver core to instantiate device attributes
Input: exc3000 - add EXC81W32 support
dt-bindings: input: touchscreen: exc3000: add EXC81W32
Input: twl4030-pwrbutton - fix kernel-doc warning
Input: himax_hx83112b - add support for HX83100A
Input: himax_hx83112b - add himax_chip struct for multi-chip support
Input: himax_hx83112b - implement MCU register reading
Input: himax_hx83112b - use more descriptive register defines
dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
Input: do not check number of events in input_pass_values()
Input: preallocate memory to hold event values
Input: rearrange input_alloc_device() to prepare for preallocating of vals
Input: simplify event handling logic
Input: make events() method return number of events processed
Input: make sure input handlers define only one processing method
Input: evdev - remove ->event() method
...
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
-----BEGIN PGP SIGNATURE-----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=perV
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H
- Added I2C support in the Arioha SoC by linking the Mediatek I2C
controller
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by removing
unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during suspend()
before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for spurious
interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam, nVidia
Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with the
i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)"
* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
i2c: document new callbacks in i2c_algorithm
dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
dt-bindings: i2c: at91: Add sama7d65 compatible string
i2c: st: reword according to newest specification
i2c: cpm: reword according to newest specification
i2c: virtio: reword according to newest specification
i2c: nvidia-gpu: reword according to newest specification
i2c: viai2c: reword according to newest specification
i2c: viperboard: reword according to newest specification
i2c: uniphier: reword according to newest specification
i2c: uniphier-f: reword according to newest specification
i2c: tiny-usb: reword according to newest specification
i2c: thunderx-pcidrv: reword according to newest specification
i2c: tegra-bpmp: reword according to newest specification
i2c: taos-evm: reword according to newest specification
i2c: sun6i-p2wi: reword according to newest specification
i2c: stm32f4: reword according to newest specification
i2c: sprd: reword according to newest specification
i2c: sis5595: reword according to newest specification
i2c: rzv2m: reword according to newest specification
...
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
This is the "big" staging driver update for 6.11-rc1. Not really all
that much happened this release cycle, just lots of tiny cleanups,
overall about 3000 lines removed, so the cleanups were worth it.
Included in here are:
- loads of rtl8723bs driver cleanups
- lots of rtl8192e driver cleanups
- vc04_services reworks and cleanups as that codebase gets slowly
evolved into something that will make it into the "real" part of the
kernel hopefully soon.
- other tiny staging driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppZKQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylReQCg0PCB/yroiLFzLxQOZYE3W0ffP6AAoMBMXb0a
2Bu/hV6ptaemwIW/oTPR
=/g6K
-----END PGP SIGNATURE-----
Merge tag 'staging-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"This is the "big" staging driver update for 6.11-rc1. Not really all
that much happened this release cycle, just lots of tiny cleanups,
overall about 3000 lines removed, so the cleanups were worth it.
Included in here are:
- loads of rtl8723bs driver cleanups
- lots of rtl8192e driver cleanups
- vc04_services reworks and cleanups as that codebase gets slowly
evolved into something that will make it into the "real" part of
the kernel hopefully soon.
- other tiny staging driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (124 commits)
staging: rtl8723bs: Remove constant result function CheckNegative()
staging: rtl8723bs: Remove unused macros in rtw_mlme_ext.h
staging: rtl8723bs: Remove unused macros in hal_pwr_seq.h
staging: rtl8723bs: Remove unused macros in rtw_efuse.h
staging: rtl8723bs: Remove unused macros in rtw_mlme.h
staging: rtl8723bs: Remove unused macros in HalPwrSeqCmd.h
staging: rtl8723bs: Remove unused macros in Hal8723BReg.h
staging: rtl8723bs: Remove unused macros in Hal8192CPhyReg.h
staging: rtl8723bs: Delete file hal_phy_reg_8723b.h
staging: rtl8723bs: Move last macro from hal_phy_reg_8723b.h
staging: rtl8723bs: Remove unused macros in hal_phy_reg_8723b.h
staging: rtl8723bs: Remove unused macros in hal_com_reg.h
staging: rtl8723bs: Remove unused macros in rtw_ht.h
staging: rtl8723bs: Remove unused macros in hal_com_h2c.h
staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload
staging: vchiq_core: Bubble up wait_event_interruptible() return value
staging: nvec: Use x instead of x != NULL to improve readability.
staging: rtl8192e: Fix conflicting types error with net_device.
staging: rtl8723bs: Remove unused variable pwdev_priv
staging: vc04_services: Update testing instructions
...
Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities for
thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppaNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXZwCgrEtIAQw0x6EF7w/iTWVS5UJj9AEAoLCj5UwO
WX978uThyUctuYYKbw+8
=Cm7j
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
Here is a small set of tty and serial driver updates for 6.11-rc1. Not
much happened this cycle, unlike the previous kernel release which had
lots of "excitement" in this part of the kernel. Included in here are
the following changes:
- dt binding updates for new platforms
- 8250 driver updates
- various small serial driver fixes and updates
- printk/console naming and matching attempt #2 (was reverted for
6.10-final, should be good to go this time around, acked by the
relevant maintainers).
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppbCQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymV1ACeIY5kgipqY7w4d3/7PcpKMiftrisAn0hr6csj
Gan+k3cuVGlasGkaQ5/B
=35VK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is a small set of tty and serial driver updates for 6.11-rc1. Not
much happened this cycle, unlike the previous kernel release which had
lots of "excitement" in this part of the kernel. Included in here are
the following changes:
- dt binding updates for new platforms
- 8250 driver updates
- various small serial driver fixes and updates
- printk/console naming and matching attempt #2 (was reverted for
6.10-final, should be good to go this time around, acked by the
relevant maintainers).
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits)
Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports
serial: core: Add serial_base_match_and_update_preferred_console()
printk: Add match_devname_and_update_preferred_console()
serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT
dt-bindings: serial: sc16is7xx: add reset-gpios
dt-bindings: serial: vt8500-uart: convert to json-schema
serial: 8250_platform: Explicitly show we initialise ISA ports only once
tty: add missing MODULE_DESCRIPTION() macros
dt-bindings: serial: mediatek,uart: add MT7988
serial: sh-sci: Add support for RZ/V2H(P) SoC
dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support
dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required
dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names'
dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end
riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts
serial: 8250_dw: Use reset array API to get resets
dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC
serial: 8250: Extract platform driver
serial: 8250: Extract RSA bits
serial: imx: stop casting struct uart_port to struct imx_port
...
Including fixes from netfilter.
Current release - new code bugs:
- eth: fbnic: fix s390 build.
- eth: airoha: fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Q1xF
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Notably this includes fixes for a s390 build breakage.
Current release - new code bugs:
- eth: fbnic: fix s390 build
- eth: airoha: fix NULL pointer dereference in
airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow"
* tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
eth: fbnic: don't build the driver when skb has more than 21 frags
net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
net: wwan: t7xx: add support for Dell DW5933e
ipv4: Fix incorrect TOS in fibmatch route get reply
ipv4: Fix incorrect TOS in route get reply
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
driver core: auxiliary bus: Fix documentation of auxiliary_device
net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_ports
gve: Fix XDP TX completion handling when counters overflow
ipvs: properly dereference pe in ip_vs_add_service
selftests: netfilter: add test case for recent mismatch bug
netfilter: nf_set_pipapo: fix initial map fill
netfilter: ctnetlink: use helper function to calculate expect ID
eth: fbnic: fix s390 build.
-----BEGIN PGP SIGNATURE-----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=ROO7
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for build breakage on 32bit platforms"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: change BTRFS_MOUNT_* flags to 64bit type
- fix an invalid pointer dereference in error path in pwrseq core
- reduce the Kconfig noise from PCI pwrctl choices
-----BEGIN PGP SIGNATURE-----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=I1ot
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fixes from Bartosz Golaszewski:
"There's one fix for an invalid pointer dereference in error path
reported by smatch and two patches that address the noisy config
choices you reported earlier this week.
Summary:
- fix an invalid pointer dereference in error path in pwrseq core
- reduce the Kconfig noise from PCI pwrctl choices"
* tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
arm64: qcom: don't select HAVE_PWRCTL when PCI=n
Kconfig: reduce the amount of power sequencing noise
power: sequencing: fix an invalid pointer dereference in error path
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----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=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
clk driver support. We have the usual Qualcomm clk drivers, along with
clk drivers for the Sophgo and T-Head vendors, all to support some new
SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
I really wanted to land a bunch of KUnit clk code that I've been working
on whenever I get some free time but it turned into a pumpkin at the
last minute so I dropped those patches. I'll let it soak in linux-next
after the merge window closes. I have a suspicion that we're going to
need to totally rework the clk framework to fix structural issues like
locking, clk rate setting, and runtime PM usage. Having a bunch of unit
tests for that will help make sure that all keeps working.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm
X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match
HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as .of_match_table,
because the driver is instantiated as MFD cell, not as standalone platform
driver. Populated .of_match_table confused people few times to convert the
code to device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops the
system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M
-----BEGIN PGP SIGNATURE-----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=jEjn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
clk driver support.
We have the usual Qualcomm clk drivers, along with clk drivers for the
Sophgo and T-Head vendors, all to support some new SoCs.
Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.
Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO
emulation
New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers
Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
Qualcomm X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
match HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as
.of_match_table, because the driver is instantiated as MFD cell,
not as standalone platform driver. Populated .of_match_table
confused people few times to convert the code to
device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops
the system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and
avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: sunxi-ng r40: Constify struct regmap_config
clk: en7523: fix rate divider for slic and spi clocks
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
...
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
- Add support for 8-byte accesses when using read/write through the
device regions. This fills a gap for userspace drivers that might
not be able to use access through mmap to perform native register
width accesses. (Gerd Bayer)
- Add missing MODULE_DESCRIPTION to vfio-mdev sample drivers and
replace a non-standard MODULE_INFO usage. (Jeff Johnson)
-----BEGIN PGP SIGNATURE-----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=sA4G
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.11-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Add support for 8-byte accesses when using read/write through the
device regions. This fills a gap for userspace drivers that might
not be able to use access through mmap to perform native register
width accesses (Gerd Bayer)
- Add missing MODULE_DESCRIPTION to vfio-mdev sample drivers and
replace a non-standard MODULE_INFO usage (Jeff Johnson)
* tag 'vfio-v6.11-rc1' of https://github.com/awilliam/linux-vfio:
vfio-mdev: add missing MODULE_DESCRIPTION() macros
vfio/pci: Fix typo in macro to declare accessors
vfio/pci: Support 8-byte PCI loads and stores
vfio/pci: Extract duplicated code into macro
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes. The only core changes are to both bsg and scsi to
pass in the device instead of setting it afterwards as q->queuedata,
so no functional change.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZpl6BiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVkAAQCOLA0V
TFI4RfRjk7TW/6ZgKVS5A4NNLG8p8r9F7Y/QswEAlT4NrYnHiHQwBYEiTw6w02J8
SqiHtHKv/SQ7LIwEJlQ=
=WhCT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes.
The only core changes are to both bsg and scsi to pass in the device
instead of setting it afterwards as q->queuedata, so no functional
change"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
scsi: qla2xxx: Convert comma to semicolon
scsi: qla2xxx: Update version to 10.02.09.300-k
scsi: qla2xxx: Use QP lock to search for bsg
scsi: qla2xxx: Reduce fabric scan duplicate code
scsi: qla2xxx: Fix optrom version displayed in FDMI
scsi: qla2xxx: During vport delete send async logout explicitly
scsi: qla2xxx: Complete command early within lock
scsi: qla2xxx: Fix flash read failure
scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
scsi: qla2xxx: Fix for possible memory corruption
scsi: qla2xxx: validate nvme_local_port correctly
scsi: qla2xxx: Unable to act on RSCN for port online
scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
scsi: ufs: core: Add fill_crypto_prdt variant op
scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
scsi: ufs: mcq: Make .get_hba_mac() optional
...
targets
- Dm-io cleansups and refactoring
- Remove unused 'struct thunk' in dm-cache
- Handle minor device numbers > 255 in dm-init
- Dm-verity refactoring & enabling platform keyring
- Fix warning in dm-raid
- Improve dm-crypt performance - split bios to smaller pieces, so that
They could be processed concurrently
- Stop using blk_limits_io_{min,opt}
- Dm-vdo cleanup and refactoring
- Remove max_write_zeroes_granularity and max_secure_erase_granularity
- Dm-multipath cleanup & refactoring
- Add dm-crypt and dm-integrity support for non-power-of-2 sector size
- Fix reshape in dm-raid
- Make dm_block_validator const
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCZpo+9xQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbYKDAQCZP2pJyh9tRZ8GsHtk3l/ZMftmk1/c
26v6vYlOTObJHAEA3TH2ahVnzhqYs/x3zEW/n91feTSeUJrrJ9DqHxWt+Ac=
=S3yx
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- Optimize processing of flush bios in the dm-linear and dm-stripe
targets
- Dm-io cleansups and refactoring
- Remove unused 'struct thunk' in dm-cache
- Handle minor device numbers > 255 in dm-init
- Dm-verity refactoring & enabling platform keyring
- Fix warning in dm-raid
- Improve dm-crypt performance - split bios to smaller pieces, so that
They could be processed concurrently
- Stop using blk_limits_io_{min,opt}
- Dm-vdo cleanup and refactoring
- Remove max_write_zeroes_granularity and max_secure_erase_granularity
- Dm-multipath cleanup & refactoring
- Add dm-crypt and dm-integrity support for non-power-of-2 sector size
- Fix reshape in dm-raid
- Make dm_block_validator const
* tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (33 commits)
dm vdo: fix a minor formatting issue in vdo.rst
dm vdo int-map: fix kerneldoc formatting
dm vdo repair: add missing kerneldoc fields
dm: Constify struct dm_block_validator
dm-integrity: introduce the Inline mode
dm: introduce the target flag mempool_needs_integrity
dm raid: fix stripes adding reshape size issues
dm raid: move _get_reshape_sectors() as prerequisite to fixing reshape size issues
dm-crypt: support for per-sector NVMe metadata
dm mpath: don't call dm_get_device in multipath_message
dm: factor out helper function from dm_get_device
dm-verity: fix dm_is_verity_target() when dm-verity is builtin
dm: Remove max_secure_erase_granularity
dm: Remove max_write_zeroes_granularity
dm vdo indexer: use swap() instead of open coding it
dm vdo: remove unused struct 'uds_attribute'
dm: stop using blk_limits_io_{min,opt}
dm-crypt: limit the size of encryption requests
dm verity: add support for signature verification with platform keyring
dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
...
- reduce duplicate swiotlb pool lookups (Michael Kelley)
- minor small fixes (Yicong Yang, Yang Li)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmaZ+C0LHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPtUw/9FZr0azAzx1E5nqDNfa5sisqoPZUFKcHYBYmjhcgL
9NvDKbKqriRBt8fAMtjGpQqUfpIytfa4p0BGLYnzYKJ8Im+MqC9KYq7lhoNVQGO3
iz8T8clT9TPoVDkiMn/LXlf6dqE0SQtcSh4TJ1c+aTFFlez5jXClFu376rcbdewM
n+nyGL93uaCeRpeQlywyBsUdpu9NnWAJUYi/OszWSTlX/1ucG5kD9kNQ4sOFL0S/
WszylOCIuur9EweIvMgPa5X5yCUsr/n95EthbIQRiZq/TSkLpJ3DkTk3VYaaKLsJ
imq5Q6dqOnPplL22X6GgvXEDYd1OYzYSvbB93HcxuGnIIYLvdFMV+McCTkwL7XJV
v9fDNsx8Wn7cS+6OpT0YxfTFvzHXFAzRTqVoqA/lCWo8eaclzUKM3qOoIQxjl1Wh
1IDoHUhiH0m0ecS+ZzljjDrn39RzU6+5XJiJzCmzYlqL/9f0SumTCsNrEmF3W6l9
GmuP2Q49Rbh+Ru+oyx3KGlBS9DQxTB+heBnjkwigtAiwoO8Z2V9Vwg/a2Lzl3RkN
vDaHqEo6f8gAc/QlonOjN9UfuR5U8bxGUps1zw9O0CeTDqSDXmJKvkddfkBSAY7s
bIW+sObA5yRrPuwz4ALykw3h1UJXdZNJIEYjin3CJIHr3K0DZADWXXSXCSao16kC
MXU=
=PzrU
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce duplicate swiotlb pool lookups (Michael Kelley)
- minor small fixes (Yicong Yang, Yang Li)
* tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix kernel-doc description for swiotlb_del_transient
swiotlb: reduce swiotlb pool lookups
dma-mapping: benchmark: Don't starve others when doing the test
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe, hf1,
qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in the
iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't rename
the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZpfvKQAKCRCFwuHvBreF
YXomAP46gZpGv5mlMOAXePRuKq6glNZWl3pVuwuycnlmjQcEUQD/dhQbJz0rZKBr
swuibPo83bFacfXJL7Wxd48m4G3EfgI=
=1eXu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
hf1, qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in
the iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
rename the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
IB/hfi1: Constify struct flag_table
RDMA/mana_ib: Set correct device into ib
bnxt_re: Fix imm_data endianness
RDMA: Fix netdev tracker in ib_device_set_netdev
RDMA/hns: Fix mbx timing out before CMD execution is completed
RDMA/hns: Fix insufficient extend DB for VFs.
RDMA/hns: Fix undifined behavior caused by invalid max_sge
RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
RDMA/hns: Fix missing pagesize and alignment check in FRMR
RDMA/hns: Fix unmatch exception handling when init eq table fails
RDMA/hns: Fix soft lockup under heavy CEQE load
RDMA/hns: Check atomic wr length
RDMA/ocrdma: Don't inline statistics functions
RDMA/core: Introduce "name_assign_type" for an IB device
RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
RDMA/qib: Fix truncation compilation warnings in qib_init.c
RDMA/efa: Add EFA 0xefa3 PCI ID
RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
RDMA/mlx5: Add plane index support when querying PTYS registers
...
Major changes:
- The iova_bitmap logic for efficiently reporting dirty pages back to
userspace has a few more tricky corner case bugs that have been resolved
and backed with new tests. The revised version has simpler logic.
- Shared branch with iommu for handle support when doing domain
attach. Handles allow the domain owner to include additional private data
on a per-device basis.
- IO Page Fault Reporting to userspace via iommufd. Page faults can be
generated on fault capable HWPTs when a translation is not present.
Routing them to userspace would allow a VMM to be able to virtualize them
into an emulated vIOMMU. This is the next step to fully enabling vSVA
support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZpfo4AAKCRCFwuHvBreF
YTO6APwMLxeWmHbE1H+7ZPuXP7B1aDuwRLczZOo3i816pIj+bQD+OywEA/NcljK6
6NLeqyUe7tECtVrFPSiRT9lWVuzZSQs=
=rnN/
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
- The iova_bitmap logic for efficiently reporting dirty pages back to
userspace has a few more tricky corner case bugs that have been
resolved and backed with new tests.
The revised version has simpler logic.
- Shared branch with iommu for handle support when doing domain attach.
Handles allow the domain owner to include additional private data on
a per-device basis.
- IO Page Fault Reporting to userspace via iommufd. Page faults can be
generated on fault capable HWPTs when a translation is not present.
Routing them to userspace would allow a VMM to be able to virtualize
them into an emulated vIOMMU. This is the next step to fully enabling
vSVA support.
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (26 commits)
iommufd: Put constants for all the uAPI enums
iommufd: Fix error pointer checking
iommufd: Add check on user response code
iommufd: Remove IOMMUFD_PAGE_RESP_FAILURE
iommufd: Require drivers to supply the cache_invalidate_user ops
iommufd/selftest: Add coverage for IOPF test
iommufd/selftest: Add IOPF support for mock device
iommufd: Associate fault object with iommufd_hw_pgtable
iommufd: Fault-capable hwpt attach/detach/replace
iommufd: Add iommufd fault object
iommufd: Add fault and response message definitions
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
iommufd/iova_bitmap: Remove iterator logic
iommufd/iova_bitmap: Dynamic pinning on iova_bitmap_set()
iommufd/iova_bitmap: Consolidate iova_bitmap_set exit conditionals
iommufd/iova_bitmap: Move initial pinning to iova_bitmap_for_each()
iommufd/iova_bitmap: Cache mapped length in iova_bitmap_map struct
...
This is additional fix that supplements my earlier fixes for handling
auth, which I unfortunately missed last time.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZpfCHhIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9LzygD+P7ityA8OCjY+e92v4HQtFW4BUmckYIFD
yZbEjQNrM5IBAKxgM2Mtyc3CPgEbA7SVmO7fdlpBJbhBofeIZKjtEvkN
=YUSL
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"An additional fix that supplements my earlier fixes for handling auth,
which I unfortunately missed last time"
* tag 'tpmdd-next-6.11-rc1-roundtwo' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Use auth only after NULL check in tpm_buf_check_hmac_response()
Add a tracepoint to track the credit changes and server in_flight value
involved in the lifetime of a R/W request, logging it against the
request/subreq debugging ID. This requires the debugging IDs to be
recorded in the cifs_credits struct.
The tracepoint can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_rw_credits/enable
Also add a three-state flag to struct cifs_credits to note if we're
interested in determining when the in_flight contribution ends and, if so,
to track whether we've decremented the contribution yet.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
At the moment, at the end of a DIO write, cifs calls netfs_resize_file() to
adjust the size of the file if it needs it. This will reduce the
zero_point (the point above which we assume a read will just return zeros)
if it's more than the new i_size, but won't increase it.
With DIO writes, however, we definitely want to increase it as we have
clobbered the local pagecache and then written some data that's not
available locally.
Fix cifs to make the zero_point above the end of a DIO or unbuffered write.
This fixes corruption seen occasionally with the generic/708 xfs-test. In
that case, the read-back of some of the written data is being
short-circuited and replaced with zeroes.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <sfrench@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs_strict_readv(), the default rc (-EACCES) is accidentally cleared by
a successful return from netfs_start_io_direct(), such that if
cifs_find_lock_conflict() fails, we don't return an error.
Fix this by resetting the default error code.
Fixes: 14b1cd25346b ("cifs: Fix locking in cifs_strict_readv()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When a subrequest is marked for needing retry, netfs will call
cifs_prepare_write() which will make cifs repick the server for the op
before renegotiating credits; it then calls cifs_issue_write() which
invokes smb2_async_writev() - which re-repicks the server.
If a different server is then selected, this causes the increment of
server->in_flight to happen against one record and the decrement to happen
against another, leading to misaccounting.
Fix this by just removing the repick code in smb2_async_writev(). As this
is only called from netfslib-driven code, cifs_prepare_write() should
always have been called first, and so server should never be NULL and the
preparatory step is repeated in the event that we do a retry.
The problem manifests as a warning looking something like:
WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs]
...
RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs]
...
smb2_writev_callback+0x334/0x560 [cifs]
cifs_demultiplex_thread+0x77a/0x11b0 [cifs]
kthread+0x187/0x1d0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Which may be triggered by a number of different xfstests running against an
Azure server in multichannel mode. generic/249 seems the most repeatable,
but generic/215, generic/249 and generic/308 may also show it.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <smfrench@gmail.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Aurelien Aptel <aaptel@suse.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
There are common cases where copy_file_range can noisily
log "source and target of copy not on same server"
e.g. the mv command across mounts to two different server's shares.
Change this to informational rather than logging as an error.
A followon patch will add dynamic trace points e.g. for
cifs_file_copychunk_range
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
API:
- Test setkey in no-SIMD context.
- Add skcipher speed test for user-specified algorithm.
Algorithms:
- Add x25519 support on ppc64le.
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86.
- Remove sm2 algorithm.
Drivers:
- Add Allwinner H616 support to sun8i-ce.
- Use DMA in stm32.
- Add Exynos850 hwrng support to exynos.
-----BEGIN PGP SIGNATURE-----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=x80X
-----END PGP SIGNATURE-----
Merge tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Test setkey in no-SIMD context
- Add skcipher speed test for user-specified algorithm
Algorithms:
- Add x25519 support on ppc64le
- Add VAES and AVX512 / AVX10 optimized AES-GCM on x86
- Remove sm2 algorithm
Drivers:
- Add Allwinner H616 support to sun8i-ce
- Use DMA in stm32
- Add Exynos850 hwrng support to exynos"
* tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits)
hwrng: core - remove (un)register_miscdev()
crypto: lib/mpi - delete unnecessary condition
crypto: testmgr - generate power-of-2 lengths more often
crypto: mxs-dcp - Ensure payload is zero when using key slot
hwrng: Kconfig - Do not enable by default CN10K driver
crypto: starfive - Fix nent assignment in rsa dec
crypto: starfive - Align rsa input data to 32-bit
crypto: qat - fix unintentional re-enabling of error interrupts
crypto: qat - extend scope of lock in adf_cfg_add_key_value_param()
Documentation: qat: fix auto_reset attribute details
crypto: sun8i-ce - add Allwinner H616 support
crypto: sun8i-ce - wrap accesses to descriptor address fields
dt-bindings: crypto: sun8i-ce: Add compatible for H616
hwrng: core - Fix wrong quality calculation at hw rng registration
hwrng: exynos - Enable Exynos850 support
hwrng: exynos - Add SMC based TRNG operation
hwrng: exynos - Implement bus clock control
hwrng: exynos - Use devm_clk_get_enabled() to get the clock
hwrng: exynos - Improve coding style
dt-bindings: rng: Add Exynos850 support to exynos-trng
...
The congestion_count was introduced into the struct cgroup by
commit d09d8df3a294 ("blkcg: add generic throttling mechanism"),
but since it is closely related to the blkio subsys, it is not
appropriate to put it in the struct cgroup, so let's move it to
struct blkcg. There should be no functional changes because blkcg
is per cgroup.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240716133058.3491350-1-xiujianfeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Configuration for sbq:
depth=64, wake_batch=6, shift=6, map_nr=1
1. There are 64 requests in progress:
map->word = 0xFFFFFFFFFFFFFFFF
2. After all the 64 requests complete, and no more requests come:
map->word = 0xFFFFFFFFFFFFFFFF, map->cleared = 0xFFFFFFFFFFFFFFFF
3. Now two tasks try to allocate requests:
T1: T2:
__blk_mq_get_tag .
__sbitmap_queue_get .
sbitmap_get .
sbitmap_find_bit .
sbitmap_find_bit_in_word .
__sbitmap_get_word -> nr=-1 __blk_mq_get_tag
sbitmap_deferred_clear __sbitmap_queue_get
/* map->cleared=0xFFFFFFFFFFFFFFFF */ sbitmap_find_bit
if (!READ_ONCE(map->cleared)) sbitmap_find_bit_in_word
return false; __sbitmap_get_word -> nr=-1
mask = xchg(&map->cleared, 0) sbitmap_deferred_clear
atomic_long_andnot() /* map->cleared=0 */
if (!(map->cleared))
return false;
/*
* map->cleared is cleared by T1
* T2 fail to acquire the tag
*/
4. T2 is the sole tag waiter. When T1 puts the tag, T2 cannot be woken
up due to the wake_batch being set at 6. If no more requests come, T1
will wait here indefinitely.
This patch achieves two purposes:
1. Check on ->cleared and update on both ->cleared and ->word need to
be done atomically, and using spinlock could be the simplest solution.
2. Add extra check in sbitmap_deferred_clear(), to identify whether
->word has free bits.
Fixes: ea86ea2cdced ("sbitmap: ammortize cost of clearing bits")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240716082644.659566-1-yang.yang@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds a poll queue check, aiming to help users use polled IO
accurately.
If users do polled IO but the device doesn't have poll queues, they will
get suboptimal performance data and waste CPU resources. Add a poll queue
check batching this. If users don't have the device properly configured,
or if it simply doesn't support polled IO, it will error the IO with
-EOPNOTSUPP. This is similar to what we used to do for sync polled IO,
which is no longer supported.
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20240718070817.1031494-1-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
rqf_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-16-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have a bit index for RQF_x in __RQF_x, use __RQF_x to simplify
the definition of RQF_NAME() by not using ilog2((__force u32()).
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-15-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similar to what we do for enum req_flag_bits, divide the definition of
RQF_x flags into an enum to declare the bits and an actual flag.
Tweak some comments to not spill onto new lines.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-14-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
cmd_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-13-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make BLK_TAG_ALLOC_x an enum and add a "max" entry.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-12-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refresh values in BLK_MQ_F_x enum, and then re-arrange members in
hctx_flag_name[] to match that enum. Renumber
BLK_MQ_F_ALLOC_POLICY_START_BIT to match the value refresh.
Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
hctx_flag_name[].
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-11-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a build-time assert that we are not missing entries from
hctx_state_name[]. For this, create a separate enum for state flags and add
a "max" entry for BLK_MQ_S_x flags.
The numbering for those enum values is as default, so don't explicitly
number.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-10-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jiaxun Yang
Huacai Chen
Jinjie Ruan
Miquel Raynal
Linus Torvalds
David Howells
Steve French
Xiu Jianfeng
Yang Yang
hexue
John Garry