Commit Graph

919 Commits

Author SHA1 Message Date
Linus Torvalds
1ce2c85137 Char/Misc driver fixes for 5.2-rc4
Here are some small char and misc driver fixes for 5.2-rc4 to resolve a
 number of reported issues.
 
 The most "notable" one here is the kernel headers in proc^Wsysfs fixes.
 Those changes move the header file info into sysfs and fixes the build
 issues that you reported.
 
 Other than that, a bunch of small habanalabs driver fixes, some fpga
 driver fixes, and a few other tiny driver fixes.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuEVg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yma0QCfVPa7r1rHqljz1UgvjKJTzVg8g9wAn1W1mddx
 MIlG+0+ZnBdaPzyzoY1O
 =0LJD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.2-rc4 to resolve
  a number of reported issues.

  The most "notable" one here is the kernel headers in proc^Wsysfs
  fixes. Those changes move the header file info into sysfs and fixes
  the build issues that you reported.

  Other than that, a bunch of small habanalabs driver fixes, some fpga
  driver fixes, and a few other tiny driver fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Read upper bits of trace buffer from RWPHI
  habanalabs: Fix virtual address access via debugfs for 2MB pages
  fpga: zynqmp-fpga: Correctly handle error pointer
  habanalabs: fix bug in checking huge page optimization
  habanalabs: Avoid using a non-initialized MMU cache mutex
  habanalabs: fix debugfs code
  uapi/habanalabs: add opcode for enable/disable device debug mode
  habanalabs: halt debug engines on user process close
  test_firmware: Use correct snprintf() limit
  genwqe: Prevent an integer overflow in the ioctl
  parport: Fix mem leak in parport_register_dev_model
  fpga: dfl: expand minor range when registering chrdev region
  fpga: dfl: Add lockdep classes for pdata->lock
  fpga: dfl: afu: Pass the correct device to dma_mapping_error()
  fpga: stratix10-soc: fix use-after-free on s10_init()
  w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback)
  kheaders: Do not regenerate archive if config is not changed
  kheaders: Move from proc to sysfs
  lkdtm/bugs: Adjust recursion test to avoid elision
  lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
2019-06-08 12:50:36 -07:00
Joel Fernandes (Google)
f7b101d330 kheaders: Move from proc to sysfs
The kheaders archive consisting of the kernel headers used for compiling
bpf programs is in /proc. However there is concern that moving it here
will make it permanent. Let us move it to /sys/kernel as discussed [1].

[1] https://lore.kernel.org/patchwork/patch/1067310/#1265969

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 20:16:01 +02:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Dan Williams
e900a918b0 mm: shuffle initial free memory to improve memory-side-cache utilization
Patch series "mm: Randomize free memory", v10.

This patch (of 3):

Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache.  Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms.  In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM.  Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].

Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:

    It's been a problem in the HPC space:
    http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/

    A kernel module called zonesort is available to try to help:
    https://software.intel.com/en-us/articles/xeon-phi-software

    and this abandoned patch series proposed that for the kernel:
    https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com

    Dan's patch series doesn't attempt to ensure buffers won't conflict, but
    also reduces the chance that the buffers will. This will make performance
    more consistent, albeit slower than "optimal" (which is near impossible
    to attain in a general-purpose kernel).  That's better than forcing
    users to deploy remedies like:
        "To eliminate this gradual degradation, we have added a Stream
         measurement to the Node Health Check that follows each job;
         nodes are rebooted whenever their measured memory bandwidth
         falls below 300 GB/s."

A replacement for zonesort was merged upstream in commit cc9aec03e5
("x86/numa_emulation: Introduce uniform split capability").  With this
numa_emulation capability, memory can be split into cache sized
("near-memory" sized) numa nodes.  A bind operation to such a node, and
disabling workloads on other nodes, enables full cache performance.
However, once the workload exceeds the cache size then cache conflicts
are unavoidable.  While HPC environments might be able to tolerate
time-scheduling of cache sized workloads, for general purpose server
platforms, the oversubscribed cache case will be the common case.

The worst case scenario is that a server system owner benchmarks a
workload at boot with an un-contended cache only to see that performance
degrade over time, even below the average cache performance due to
excessive conflicts.  Randomization clips the peaks and fills in the
valleys of cache utilization to yield steady average performance.

Here are some performance impact details of the patches:

1/ An Intel internal synthetic memory bandwidth measurement tool, saw a
   3X speedup in a contrived case that tries to force cache conflicts.
   The contrived cased used the numa_emulation capability to force an
   instance of the benchmark to be run in two of the near-memory sized
   numa nodes.  If both instances were placed on the same emulated they
   would fit and cause zero conflicts.  While on separate emulated nodes
   without randomization they underutilized the cache and conflicted
   unnecessarily due to the in-order allocation per node.

2/ A well known Java server application benchmark was run with a heap
   size that exceeded cache size by 3X.  The cache conflict rate was 8%
   for the first run and degraded to 21% after page allocator aging.  With
   randomization enabled the rate levelled out at 11%.

3/ A MongoDB workload did not observe measurable difference in
   cache-conflict rates, but the overall throughput dropped by 7% with
   randomization in one case.

4/ Mel Gorman ran his suite of performance workloads with randomization
   enabled on platforms without a memory-side-cache and saw a mix of some
   improvements and some losses [3].

While there is potentially significant improvement for applications that
depend on low latency access across a wide working-set, the performance
may be negligible to negative for other workloads.  For this reason the
shuffle capability defaults to off unless a direct-mapped
memory-side-cache is detected.  Even then, the page_alloc.shuffle=0
parameter can be specified to disable the randomization on those systems.

Outside of memory-side-cache utilization concerns there is potentially
security benefit from randomization.  Some data exfiltration and
return-oriented-programming attacks rely on the ability to infer the
location of sensitive data objects.  The kernel page allocator, especially
early in system boot, has predictable first-in-first out behavior for
physical pages.  Pages are freed in physical address order when first
onlined.

Quoting Kees:
    "While we already have a base-address randomization
     (CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and
     memory layouts would certainly be using the predictability of
     allocation ordering (i.e. for attacks where the base address isn't
     important: only the relative positions between allocated memory).
     This is common in lots of heap-style attacks. They try to gain
     control over ordering by spraying allocations, etc.

     I'd really like to see this because it gives us something similar
     to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator."

While SLAB_FREELIST_RANDOM reduces the predictability of some local slab
caches it leaves vast bulk of memory to be predictably in order allocated.
However, it should be noted, the concrete security benefits are hard to
quantify, and no known CVE is mitigated by this randomization.

Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform
a Fisher-Yates shuffle of the page allocator 'free_area' lists when they
are initially populated with free memory at boot and at hotplug time.  Do
this based on either the presence of a page_alloc.shuffle=Y command line
parameter, or autodetection of a memory-side-cache (to be added in a
follow-on patch).

The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free
pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e.  10,
4MB this trades off randomization granularity for time spent shuffling.
MAX_ORDER-1 was chosen to be minimally invasive to the page allocator
while still showing memory-side cache behavior improvements, and the
expectation that the security implications of finer granularity
randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM.  The
performance impact of the shuffling appears to be in the noise compared to
other memory initialization work.

This initial randomization can be undone over time so a follow-on patch is
introduced to inject entropy on page free decisions.  It is reasonable to
ask if the page free entropy is sufficient, but it is not enough due to
the in-order initial freeing of pages.  At the start of that process
putting page1 in front or behind page0 still keeps them close together,
page2 is still near page1 and has a high chance of being adjacent.  As
more pages are added ordering diversity improves, but there is still high
page locality for the low address pages and this leads to no significant
impact to the cache conflict rate.

[1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/
[2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM
[3]: https://lkml.org/lkml/2018/10/12/309

[dan.j.williams@intel.com: fix shuffle enable]
  Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com
[cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts]
  Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw
Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:48 -07:00
Linus Torvalds
cf482a49af Driver core/kobject patches for 5.2-rc1
Here is the "big" set of driver core patches for 5.2-rc1
 
 There are a number of ACPI patches in here as well, as Rafael said they
 should go through this tree due to the driver core changes they
 required.  They have all been acked by the ACPI developers.
 
 There are also a number of small subsystem-specific changes in here, due
 to some changes to the kobject core code.  Those too have all been acked
 by the various subsystem maintainers.
 
 As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
 8XCYcif2RxjtdJWXbjdm
 =/rLh
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...
2019-05-07 13:01:40 -07:00
Joel Fernandes (Google)
bc0c60457c init/config: Do not select BUILD_BIN2C for IKCONFIG
Since commit 13610aa908 ("kernel/configs: use .incbin directive to
embed config_data.gz"), IKCONFIG no longer uses BUILD_BIN2C so prevent
it from being selected in Kconfig.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29 16:48:04 +02:00
Joel Fernandes (Google)
43d8ce9d65 Provide in-kernel headers to make extending kernel easier
Introduce in-kernel headers which are made available as an archive
through proc (/proc/kheaders.tar.xz file). This archive makes it
possible to run eBPF and other tracing programs that need to extend the
kernel for tracing purposes without any dependency on the file system
having headers.

A github PR is sent for the corresponding BCC patch at:
https://github.com/iovisor/bcc/pull/2312

On Android and embedded systems, it is common to switch kernels but not
have kernel headers available on the file system. Further once a
different kernel is booted, any headers stored on the file system will
no longer be useful. This is an issue even well known to distros.
By storing the headers as a compressed archive within the kernel, we can
avoid these issues that have been a hindrance for a long time.

The best way to use this feature is by building it in. Several users
have a need for this, when they switch debug kernels, they do not want to
update the filesystem or worry about it where to store the headers on
it. However, the feature is also buildable as a module in case the user
desires it not being part of the kernel image. This makes it possible to
load and unload the headers from memory on demand. A tracing program can
load the module, do its operations, and then unload the module to save
kernel memory. The total memory needed is 3.3MB.

By having the archive available at a fixed location independent of
filesystem dependencies and conventions, all debugging tools can
directly refer to the fixed location for the archive, without concerning
with where the headers on a typical filesystem which significantly
simplifies tooling that needs kernel headers.

The code to read the headers is based on /proc/config.gz code and uses
the same technique to embed the headers.

Other approaches were discussed such as having an in-memory mountable
filesystem, but that has drawbacks such as requiring an in-kernel xz
decompressor which we don't have today, and requiring usage of 42 MB of
kernel memory to host the decompressed headers at anytime. Also this
approach is simpler than such approaches.

Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-29 16:48:03 +02:00
David Howells
5dd50aaeb1
Make anon_inodes unconditional
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-19 14:03:11 +02:00
Linus Torvalds
ffd602eb46 Kbuild updates for v5.1
- do not generate unneeded top-level built-in.a
 
  - let git ignore O= directory entirely
 
  - optimize scripts/kallsyms slightly
 
  - exclude DWARF info from *.s regardless of config options
 
  - fix GCC toolchain search path for Clang to prepare ld.lld support
 
  - do not generate modules.order when CONFIG_MODULES is disabled
 
  - simplify single target rules and remove VPATH for external module build
 
  - allow to add optional flags to dpkg-buildpackage when building deb-pkg
 
  - move some compiler option tests from Makefile to Kconfig
 
  - various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA
 PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8
 DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E
 Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB
 +7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX
 BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/
 UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE
 1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d
 sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix
 Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB
 r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU
 R8uReJ7bvmLmrVNZ/NI4
 =y9YG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - do not generate unneeded top-level built-in.a

 - let git ignore O= directory entirely

 - optimize scripts/kallsyms slightly

 - exclude DWARF info from *.s regardless of config options

 - fix GCC toolchain search path for Clang to prepare ld.lld support

 - do not generate modules.order when CONFIG_MODULES is disabled

 - simplify single target rules and remove VPATH for external module
   build

 - allow to add optional flags to dpkg-buildpackage when building
   deb-pkg

 - move some compiler option tests from Makefile to Kconfig

 - various Makefile cleanups

* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: remove scripts/basic/% build target
  kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
  kbuild: clean up scripts/gcc-version.sh
  kbuild: remove cc-version macro
  kbuild: update comment block of scripts/clang-version.sh
  kbuild: remove commented-out INITRD_COMPRESS
  kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
  kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
  kbuild: move ".config not found!" message from Kconfig to Makefile
  kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
  kbuild: simplify single target rules
  kbuild: remove empty rules for makefiles
  kbuild: make -r/-R effective in top Makefile for old Make versions
  kbuild: move tools_silent to a more relevant place
  kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
  kbuild: refactor cc-cross-prefix implementation
  kbuild: hardcode genksyms path and remove GENKSYMS variable
  scripts/gdb: refactor rules for symlink creation
  kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
  scripts/gdb: do not descend into scripts/gdb from scripts
  ...
2019-03-10 17:48:21 -07:00
Linus Torvalds
a15f6b923e Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
 "A single fix to prevent a unmet dependencies warning in Kconfig"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Make VIRT_CPU_ACCOUNTING_GEN depend on GENERIC_CLOCKEVENTS
2019-03-10 13:58:33 -07:00
Arnd Bergmann
041a15744a time: Make VIRT_CPU_ACCOUNTING_GEN depend on GENERIC_CLOCKEVENTS
Moving the CONTEXT_TRACKING Kconfig option into kernel/time/Kconfig added
an implicit dependency on the surrounding GENERIC_CLOCKEVENTS option, but
this is not always enabled when it is possible to select
VIRT_CPU_ACCOUNTING_GEN:

WARNING: unmet direct dependencies detected for CONTEXT_TRACKING
  Depends on [n]: GENERIC_CLOCKEVENTS [=n]
  Selected by [y]:
  - VIRT_CPU_ACCOUNTING_GEN [=y] && <choice> && HAVE_CONTEXT_TRACKING [=y] && HAVE_VIRT_CPU_ACCOUNTING_GEN [=y]

Platforms without GENERIC_CLOCKEVENTS are rare enough so that corner case
can be just ignored. Make it a dependency for VIRT_CPU_ACCOUNTING_GEN to
simplify the configuration.

Fixes: a4cffdad73 ("time: Move CONTEXT_TRACKING to kernel/time/Kconfig")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E . McKenney" <paulmck@linux.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/20190304200202.1163250-1-arnd@arndb.de
2019-03-06 20:43:08 +01:00
Masahiro Yamada
fa7295ab69 kbuild: clean up scripts/gcc-version.sh
Now that the Kconfig is the only user of this script, we can drop
unneeded code.

Remove the -p option, and stop prepending the output with zero,
so that Kconfig can directly use the output from this script.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-04 22:35:04 +09:00
Jens Axboe
2b188cc1bb Add io_uring IO interface
The submission queue (SQ) and completion queue (CQ) rings are shared
between the application and the kernel. This eliminates the need to
copy data back and forth to submit and complete IO.

IO submissions use the io_uring_sqe data structure, and completions
are generated in the form of io_uring_cqe data structures. The SQ
ring is an index into the io_uring_sqe array, which makes it possible
to submit a batch of IOs without them being contiguous in the ring.
The CQ ring is always contiguous, as completion events are inherently
unordered, and hence any io_uring_cqe entry can point back to an
arbitrary submission.

Two new system calls are added for this:

io_uring_setup(entries, params)
	Sets up an io_uring instance for doing async IO. On success,
	returns a file descriptor that the application can mmap to
	gain access to the SQ ring, CQ ring, and io_uring_sqes.

io_uring_enter(fd, to_submit, min_complete, flags, sigset, sigsetsize)
	Initiates IO against the rings mapped to this fd, or waits for
	them to complete, or both. The behavior is controlled by the
	parameters passed in. If 'to_submit' is non-zero, then we'll
	try and submit new IO. If IORING_ENTER_GETEVENTS is set, the
	kernel will wait for 'min_complete' events, if they aren't
	already available. It's valid to set IORING_ENTER_GETEVENTS
	and 'min_complete' == 0 at the same time, this allows the
	kernel to return already completed events without waiting
	for them. This is useful only for polling, as for IRQ
	driven IO, the application can just check the CQ ring
	without entering the kernel.

With this setup, it's possible to do async IO with a single system
call. Future developments will enable polled IO with this interface,
and polled submission as well. The latter will enable an application
to do IO without doing ANY system calls at all.

For IRQ driven IO, an application only needs to enter the kernel for
completions if it wants to wait for them to occur.

Each io_uring is backed by a workqueue, to support buffered async IO
as well. We will only punt to an async context if the command would
need to wait for IO on the device side. Any data that can be accessed
directly in the page cache is done inline. This avoids the slowness
issue of usual threadpools, since cached data is accessed as quickly
as a sync interface.

Sample application: http://git.kernel.dk/cgit/fio/plain/t/io_uring.c

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-28 08:24:23 -07:00
Masahiro Yamada
b303c6df80 kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:

 - commit e74fc973b6 ("Turn off -Wmaybe-uninitialized when building
   with -Os") turned off this option for -Os.

 - commit 815eb71e71 ("Kbuild: disable 'maybe-uninitialized' warning
   for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
   CONFIG_PROFILE_ALL_BRANCHES

 - commit a76bcf557e ("Kbuild: enable -Wmaybe-uninitialized warning
   for "make W=1"") turned off this option for GCC < 4.9
   Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903

I think this looks better by shifting the logic from Makefile to Kconfig.

Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-02-27 21:43:20 +09:00
Johannes Weiner
7b2489d37e psi: clarify the Kconfig text for the default-disable option
The current help text caused some confusion in online forums about
whether or not to default-enable or default-disable psi in vendor
kernels.  This is because it doesn't communicate the reason for why we
made this setting configurable in the first place: that the overhead is
non-zero in an artificial scheduler stress test.

Since this isn't representative of real workloads, and the effect was
not measurable in scheduler-heavy real world applications such as the
webservers and memcache installations at Facebook, it's fair to point
out that this is a pretty cautious option to select.

Link: http://lkml.kernel.org/r/20190129233617.16767-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01 15:46:24 -08:00
Jonathan Neuschäfer
9807683384 init/Kconfig: fix grammar by moving a closing parenthesis
Link: http://lkml.kernel.org/r/20190129150813.15785-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01 15:46:23 -08:00
Paul Burton
16fd20aa98 kbuild: Disable LD_DEAD_CODE_DATA_ELIMINATION with ftrace & GCC <= 4.7
When building using GCC 4.7 or older, -ffunction-sections & the -pg flag
used by ftrace are incompatible. This causes warnings or build failures
(where -Werror applies) such as the following:

  arch/mips/generic/init.c:
    error: -ffunction-sections disabled; it makes profiling impossible

This used to be taken into account by the ordering of calls to cc-option
from within the top-level Makefile, which was introduced by commit
90ad4052e8 ("kbuild: avoid conflict between -ffunction-sections and
-pg on gcc-4.7"). Unfortunately this was broken when the
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION cc-option check was moved to
Kconfig in commit e85d1d65cd ("kbuild: test dead code/data elimination
support in Kconfig"), because the flags used by this check no longer
include -pg.

Fix this by not allowing CONFIG_LD_DEAD_CODE_DATA_ELIMINATION to be
enabled at the same time as ftrace/CONFIG_FUNCTION_TRACER when building
using GCC 4.7 or older.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: e85d1d65cd ("kbuild: test dead code/data elimination support in Kconfig")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-14 10:37:09 +09:00
Masahiro Yamada
e9666d10a5 jump_label: move 'asm goto' support test to Kconfig
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".

The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:

  #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
  # define HAVE_JUMP_LABEL
  #endif

We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.

Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-06 09:46:51 +09:00
Linus Torvalds
047ce6d380 audit/stable-4.21 PR 20181224
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlwhAwIUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNl1w/+PKsewN5VkmmfibIxZ+iZwe1KGB+L
 iOwkdHDkG1Bae5A7TBdbKMbHq0FdhaiDXAIFrfunBG/tbgBF9O0056edekR4rRLp
 ReGQVNpGMggiATyVKrc3vi+4+UYQqtS6N7Y8q+mMMX/hVeeESXrTAZdgxSWwsZAX
 LbYwXXYUyupLvelpkpakE6VPZEcatcYWrVK/vFKLkTt2jLLlLPtanbMf0B71TULi
 5EZSVBYWS71a6yvrrYcVDDZjgot31nVQfX4EIqE6CVcXLuL9vqbZBGKZh+iAGbjs
 UdKgaQMZ/eJ4CRYDJca0Bnba3n1AKO4uNssY0nrMW4s/inDPrJnMZ0kgGWfayE3d
 QR96aHEP5W3SZoiJCUlYm8a4JFfndYKn4YBvqjvLgIkbd784/rvI+sNGM9BF1DNP
 f05frIJVHLNO3sECKWMmQyMGWGglj7bLsjtKrai5UQReyFLpM/q/Lh3J1IHZ9KZq
 YWFTA4G0rg7x2bdEB4Qh/SaLOOHW7uyQ7IJCYfzSKsZCIO++RqCQoArxiKRE6++C
 hv0UG6NGb6Z6a+k1JSzlxCXPmcui0zow7aqEpZSl/9kiYzkLpBITha/ERP7at5M2
 W3JVNfQNn6kPtZFgmNuP7rNE9Yn6jnbIdks0nsi/J/4KUr/p2Mfc5LamyTj1unk6
 xf7S+xmOFKHAc2s=
 =PCHx
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "In the finest of holiday of traditions, I have a number of gifts to
  share today. While most of them are re-gifts from others, unlike the
  typical re-gift, these are things you will want in and around your
  tree; I promise.

  This pull request is perhaps a bit larger than our typical PR, but
  most of it comes from Jan's rework of audit's fanotify code; a very
  welcome improvement. We ran this through our normal regression tests,
  as well as some newly created stress tests and everything looks good.

  Richard added a few patches, mostly cleaning up a few things and and
  shortening some of the audit records that we send to userspace; a
  change the userspace folks are quite happy about.

  Finally YueHaibing and I kick in a few patches to simplify things a
  bit and make the code less prone to errors.

  Lastly, I want to say thanks one more time to everyone who has
  contributed patches, testing, and code reviews for the audit subsystem
  over the past year. The project is what it is due to your help and
  contributions - thank you"

* tag 'audit-pr-20181224' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (22 commits)
  audit: remove duplicated include from audit.c
  audit: shorten PATH cap values when zero
  audit: use current whenever possible
  audit: minimize our use of audit_log_format()
  audit: remove WATCH and TREE config options
  audit: use session_info helper
  audit: localize audit_log_session_info prototype
  audit: Use 'mark' name for fsnotify_mark variables
  audit: Replace chunk attached to mark instead of replacing mark
  audit: Simplify locking around untag_chunk()
  audit: Drop all unused chunk nodes during deletion
  audit: Guarantee forward progress of chunk untagging
  audit: Allocate fsnotify mark independently of chunk
  audit: Provide helper for dropping mark's chunk reference
  audit: Remove pointless check in insert_hash()
  audit: Factor out chunk replacement code
  audit: Make hash table insertion safe against concurrent lookups
  audit: Embed key into chunk
  audit: Fix possible tagging failures
  audit: Fix possible spurious -ENOSPC error
  ...
2018-12-27 11:58:50 -08:00
Baruch Siach
428a1cb4ba psi: fix reference to kernel commandline enable
The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED
help text contradicts the documentation in kernel-parameters.txt, and
the code.  Fix that.

Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org
Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-14 15:05:45 -08:00
Johannes Weiner
e0c274472d psi: make disabling/enabling easier for vendor kernels
Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30 14:56:14 -08:00
Richard Guy Briggs
c8fc5d49c3 audit: remove WATCH and TREE config options
Remove the CONFIG_AUDIT_WATCH and CONFIG_AUDIT_TREE config options since
they are both dependent on CONFIG_AUDITSYSCALL and force
CONFIG_FSNOTIFY.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-19 16:29:50 -05:00
Johannes Weiner
2ce7135adc psi: cgroup support
On a system that executes multiple cgrouped jobs and independent
workloads, we don't just care about the health of the overall system, but
also that of individual jobs, so that we can ensure individual job health,
fairness between jobs, or prioritize some jobs over others.

This patch implements pressure stall tracking for cgroups.  In kernels
with CONFIG_PSI=y, cgroup2 groups will have cpu.pressure, memory.pressure,
and io.pressure files that track aggregate pressure stall times for only
the tasks inside the cgroup.

Link: http://lkml.kernel.org/r/20180828172258.3185-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Johannes Weiner
eb414681d5 psi: pressure stall information for CPU, memory, and IO
When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills.  In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.

In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.

A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively.  Stall states are aggregate versions of the per-task delay
accounting delays:

       cpu: some tasks are runnable but not executing on a CPU
       memory: tasks are reclaiming, or waiting for swapin or thrashing cache
       io: tasks are waiting for io completions

These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit.  They can also indicate when the system
is approaching lockup scenarios and OOMs.

To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states.  Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime.  A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).

[hannes@cmpxchg.org: doc fixlet, per Randy]
  Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
  Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
  Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
  Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:32 -07:00
Vincent Guittot
11d4afd4ff sched/pelt: Fix warning and clean up IRQ PELT config
Create a config for enabling irq load tracking in the scheduler.
irq load tracking is useful only when irq or paravirtual time is
accounted but it's only possible with SMP for now.

Also use __maybe_unused to remove the compilation warning in
update_rq_clock_task() that has been introduced by:

  2e62c4743a ("sched/fair: Remove #ifdefs from scale_rt_capacity()")

Suggested-by: Ingo Molnar <mingo@redhat.com>
Reported-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: dou_liyang@163.com
Fixes: 2e62c4743a ("sched/fair: Remove #ifdefs from scale_rt_capacity()")
Link: http://lkml.kernel.org/r/1537867062-27285-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-02 09:45:00 +02:00
Linus Torvalds
1bc276775d Kbuild updates for v4.19 (2nd)
- add build_{menu,n,g,x}config targets for compile-testing Kconfig
 
  - fix and improve recursive dependency detection in Kconfig
 
  - fix parallel building of menuconfig/nconfig
 
  - fix syntax error in clang-version.sh
 
  - suppress distracting log from syncconfig
 
  - remove obsolete "rpm" target
 
  - remove VMLINUX_SYMBOL(_STR) macro entirely
 
  - fix microblaze build with CONFIG_DYNAMIC_FTRACE
 
  - move compiler test for dead code/data elimination to Kconfig
 
  - rename well-known LDFLAGS variable to KBUILD_LDFLAGS
 
  - misc fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbgYhCAAoJED2LAQed4NsGErAP/jt7gt76+N0PZmADBZqyVR/H
 4k286g3OiT7DIcdvwqE5BRvu+zNOamDujnnXw63/jwu2RjrkLX/JnhzTbC0IZleZ
 KeO4bU4ZH0WFa0Ny9pp0LAnzbXGMnQjDXygcUd5BFoEd5JSLKW2PISEEjRh6b5B7
 swJRdgySFaMrUBRNf13FwH5EvX/D0xZQe/wFhFCOv6L4gJZFMmpGUIepgTjTUmxZ
 wcNN6xxXg+ulLHVcPdPQ9EYssNHN5xNys02+IdIrhhXuNHji/TFm4dGYuU+dDGeE
 Eu4O6Qs7pg0PFGrZ5gLxXDJEp75W+uaTNOqV+jcjq8MRxJuWxyy2biUeelKRT/KH
 0iv4ZQJVOMOhl8fZgLtQaXHyQ++5uwd6kvPPf+XFdkogGAIXK0wKWLoALFEOXwb6
 z1BBnFx09LrKPGt0ZlKX624OEczedv/UAFiSh3Ic2S3PFEpq4oHrEGhTnyKRobPv
 OEcF3RqKjmAdK7PLy4kVpTLhkutkWWhw6Giy9qXUkXYJWonJR7NTQ1mIan2LoGZC
 sGi+qKae/8xgO2Nerx59tZpkiHYTMfYeAo8frzWurOxm3YzEfaxNNGPl+IMW7VKz
 cNPzQZ5tMUy4i4PAhk/gIWibnUTPfjDbWsZSMtIbO0GFcao56EvllwD8/awuy7lO
 QkaAeZHFcF+qgU3muaYK
 =Vsb2
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - add build_{menu,n,g,x}config targets for compile-testing Kconfig

 - fix and improve recursive dependency detection in Kconfig

 - fix parallel building of menuconfig/nconfig

 - fix syntax error in clang-version.sh

 - suppress distracting log from syncconfig

 - remove obsolete "rpm" target

 - remove VMLINUX_SYMBOL(_STR) macro entirely

 - fix microblaze build with CONFIG_DYNAMIC_FTRACE

 - move compiler test for dead code/data elimination to Kconfig

 - rename well-known LDFLAGS variable to KBUILD_LDFLAGS

 - misc fixes and cleanups

* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rename LDFLAGS to KBUILD_LDFLAGS
  kbuild: pass LDFLAGS to recordmcount.pl
  kbuild: test dead code/data elimination support in Kconfig
  initramfs: move gen_initramfs_list.sh from scripts/ to usr/
  vmlinux.lds.h: remove stale <linux/export.h> include
  export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
  Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
  kbuild: make sorting initramfs contents independent of locale
  kbuild: remove "rpm" target, which is alias of "rpm-pkg"
  kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
  kconfig: suppress "configuration written to .config" for syncconfig
  kconfig: fix "Can't open ..." in parallel build
  kbuild: Add a space after `!` to prevent parsing as file pattern
  scripts: modpost: check memory allocation results
  kconfig: improve the recursive dependency report
  kconfig: report recursive dependency involving 'imply'
  kconfig: error out when seeing recursive dependency
  kconfig: add build-only configurator targets
  scripts/dtc: consolidate include path options in Makefile
2018-08-25 13:40:38 -07:00
Masahiro Yamada
e85d1d65cd kbuild: test dead code/data elimination support in Kconfig
This config option should be enabled only when both the compiler and
the linker support necessary flags.  Add proper dependencies to Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-24 08:10:00 +09:00
Adrian Reber
5cb366bb3a init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE
The CHECKPOINT_RESTORE configuration option was introduced in 2012 and
combined with EXPERT.  CHECKPOINT_RESTORE is already enabled in many
distribution kernels and also part of the defconfigs of various
architectures.

To make it easier for distributions to enable CHECKPOINT_RESTORE this
removes EXPERT and moves the configuration option out of the EXPERT block.

Link: http://lkml.kernel.org/r/20180712130733.11510-1-adrian@lisas.de
Signed-off-by: Adrian Reber <adrian@lisas.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:51 -07:00
Randy Dunlap
3903bf940b init/Kconfig: fix its typos
Correct typos of "it's" to "its.

Link: http://lkml.kernel.org/r/0ac627b6-5527-55f4-0489-1631aa34fc11@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:49 -07:00
Kirill Tkhai
84c07d11aa mm: introduce CONFIG_MEMCG_KMEM as combination of CONFIG_MEMCG && !CONFIG_SLOB
Introduce new config option, which is used to replace repeating
CONFIG_MEMCG && !CONFIG_SLOB pattern.  Next patches add a little more
memcg+kmem related code, so let's keep the defines more clearly.

Link: http://lkml.kernel.org/r/153063053670.1818.15013136946600481138.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:30 -07:00
Linus Torvalds
fa1b5d09d0 Consolidation of Kconfig files by Christoph Hellwig.
Move the source statements of arch-independent Kconfig files instead of
 duplicating the includes in every arch/$(SRCARCH)/Kconfig.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFsfAAoJED2LAQed4NsGxHsP/1tmA57OOOj8oGxO2OXhXVbr
 Q0MZqCoV4bqMvK/hgCQdl9f+tp0m+j12x4xDLdVf4OqnTXMbqvPDu3uQVKvaj/k1
 gHhsFA1tFgSbuJ8InltUsrPEQqbceeJsj50xHVAKijqI6LYeRPPSU7aE9obn+OzH
 n2nd5sLKvMI/dqdJvW6i5KPydqTH3r3iA7D+ne/XQj0s0EMXvXUPmDT1+ijTnM4a
 yfm6W5p7L/c3Ugf1Pz5PfnPl4BxBwZMfW5ie/UO8j5C6Rl0iPaOGuuHurocaaJb3
 MefR/7NEAR3G8MhJyL2+70jbbwhjpqR2b5ooz1vpuulPHxjeU45BY60XIBWq1afR
 ewsc12MMCYB695ieYWoHdaWgxD/jhffyRuajfpkXKIZEMgDxS03sMhdULXENVMx1
 M0ZQ01g/NLWt9ti9DY3eTKB3ymOhnBa1sa77nGGUHkITq4DQKwPX1J9FP/HT6RNt
 uOvzeH5kGzc7tqOlZAO0kHbwhQG1uqGcd78IYd4lgf/XfkSgDERTWjnJmnQbwr9m
 3PFuST2u8eyO+8Lh1MK76TXOEkXsHMdFugPmb6SlgtMEPKGVLDPlsj52o/LFtgzl
 eygfMiBFr2+ttkZ6IpNcpmQ4IztmDpz6XoMk3PqDAfUTUSYpCnq1gAEuff/eisCM
 Odva1ZZaeQ7WpxhsP8rr
 =gsQJ
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig consolidation from Masahiro Yamada:
 "Consolidation of Kconfig files by Christoph Hellwig.

  Move the source statements of arch-independent Kconfig files instead
  of duplicating the includes in every arch/$(SRCARCH)/Kconfig"

* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: add a Memory Management options" menu
  kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
  kconfig: use a menu in arch/Kconfig to reduce clutter
  kconfig: include kernel/Kconfig.preempt from init/Kconfig
  Kconfig: consolidate the "Kernel hacking" menu
  kconfig: include common Kconfig files from top-level Kconfig
  kconfig: remove duplicate SWAP symbol defintions
  um: create a proper drivers Kconfig
  um: cleanup Kconfig files
  um: stop abusing KBUILD_KCONFIG
2018-08-15 13:05:12 -07:00
Linus Torvalds
01f0e5cded Kconfig updates for v4.19
- show clearer error messages where pkg-config is needed, but not
   installed
 
 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
 
 - create all necessary directories by Kconfig tool itself instead
   of Makefile
 
 - update the .config unconditionally when syncconfig is invoked
 
 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory
 
 - do not try to update the .config when running install targets
 
 - add .DELETE_ON_ERROR to delete partially updated files
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFbBAAoJED2LAQed4NsGJbQP/icdG5Cj8YVuIlqBEe50KkbT
 V0jJdCyxSSUXiuTaGlFJ4RFlcbH9+4JcMdGIHqRrrtW0UpqXNcHgIOjbCaq4zLCw
 oRtva0/VC3KVlNDZR702t58t8os3qS03XuuRd1bBao19Mje7YOtHGrBfaEmZ3TIV
 jn9TX3K8PxPE8NLRuY5P3OT4fEeeUwXbleo5RuReQR8mWY3p6Gf8YjJ/mxDnoSbF
 gnot+ahWKdvJBjAbbTgoFePM7zOp4YA6Z1Nw0OerXKbchLG2D/wyDNbS2AnME3TR
 RSFuEZL3LqkZlVN1q7oQ0kzVuafghcUSx5LiRovejw7ZRemU30ixqSTZ6w6aL3X8
 nvm+arCGPS85v6RiPEnDMI9iXaqA0+yhwdKi3OLhoOEz+Y8G74JkOZErIoVpE2Ok
 wrSrmLzLzx6kcOaL50hhWQ5Jm3SGclFO1+uEcMP2vSRrrUJlkrBRvpLm+BInFVYS
 HnifGBSD73+UIrVmAcEM30YXUX4kFDoLWUd659nop270vr1JZr2/ie+WODH/fsfn
 aSDQq7AUbwybYHcSnzrv/eiZ5xiDBXcfRsvAcjpwzrUzpj6mM95XwBFOk7O/4a5w
 SuXiMSPbf/zemKhVp2wk6/nxS8SI07qEpXYMRcf3JL/kcT0KDg2/sPou//beYC56
 /s3cTXUlMrG7KTTfr0jz
 =/Dow
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - show clearer error messages where pkg-config is needed, but not
   installed

 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics

 - create all necessary directories by Kconfig tool itself instead of
   Makefile

 - update the .config unconditionally when syncconfig is invoked

 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory

 - do not try to update the .config when running install targets

 - add .DELETE_ON_ERROR to delete partially updated files

 - misc cleanups and fixes

* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove P_ENV property type
  kconfig: remove unused sym_get_env_prop() function
  kconfig: fix the rule of mainmenu_stmt symbol
  init/Kconfig: Use short unix-style option instead of --longname
  Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
  kbuild: remove auto.conf from prerequisite of phony targets
  kbuild: do not update config for 'make kernelrelease'
  kbuild: do not update config when running install targets
  kbuild: add .DELETE_ON_ERROR special target
  kbuild: use 'include' directive to load auto.conf from top Makefile
  kconfig: allow all config targets to write auto.conf if missing
  kconfig: make syncconfig update .config regardless of sym_change_count
  kconfig: create directories needed for syncconfig by itself
  kconfig: remove unneeded directory generation from local*config
  kconfig: split out useful helpers in confdata.c
  kconfig: rename file_write_dep and move it to confdata.c
  kconfig: fix typos in description of "choice" in kconfig-language.txt
  kconfig: handle format string before calling conf_message_callback()
  kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
  kconfig: check for pkg-config on make {menu,n,g,x}config
2018-08-15 12:50:10 -07:00
Linus Torvalds
e026bcc561 Kbuild updates for v4.19
- verify depmod is installed before modules_install
 
 - support build salt in case build ids must be unique between builds
 
 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS
 
 - update buildtar script to drop vax support, add arm64 support
 
 - update builddeb script for better debarch support
 
 - document the pit-fall of if_changed usage
 
 - fix parallel build of UML with O= option
 
 - make 'samples' target depend on headers_install to fix build errors
 
 - remove deprecated host-progs variable
 
 - add a new coccinelle script for refcount_t vs atomic_t check
 
 - improve double-test coccinelle script
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky
 MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev
 Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ
 qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq
 LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX
 PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ
 TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7
 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN
 dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN
 ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ
 OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9
 KGB0LYYCqGSOHR4zOjg0
 =VjfG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - verify depmod is installed before modules_install

 - support build salt in case build ids must be unique between builds

 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS

 - update buildtar script to drop vax support, add arm64 support

 - update builddeb script for better debarch support

 - document the pit-fall of if_changed usage

 - fix parallel build of UML with O= option

 - make 'samples' target depend on headers_install to fix build errors

 - remove deprecated host-progs variable

 - add a new coccinelle script for refcount_t vs atomic_t check

 - improve double-test coccinelle script

 - misc cleanups and fixes

* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  coccicheck: return proper error code on fail
  Coccinelle: doubletest: reduce side effect false positives
  kbuild: remove deprecated host-progs variable
  kbuild: make samples really depend on headers_install
  um: clean up archheaders recipe
  kbuild: add %asm-generic to no-dot-config-targets
  um: fix parallel building with O= option
  scripts: Add Python 3 support to tracing/draw_functrace.py
  builddeb: Add automatic support for sh{3,4}{,eb} architectures
  builddeb: Add automatic support for riscv* architectures
  builddeb: Add automatic support for m68k architecture
  builddeb: Add automatic support for or1k architecture
  builddeb: Add automatic support for sparc64 architecture
  builddeb: Add automatic support for mips{,64}r6{,el} architectures
  builddeb: Add automatic support for mips64el architecture
  builddeb: Add automatic support for ppc64 and powerpcspe architectures
  builddeb: Introduce functions to simplify kconfig tests in set_debarch
  builddeb: Drop check for 32-bit s390
  builddeb: Change architecture detection fallback to use dpkg-architecture
  builddeb: Skip architecture detection when KBUILD_DEBARCH is set
  ...
2018-08-15 12:09:03 -07:00
Linus Torvalds
85a0b791bc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
 "Since Martin is on vacation you get the s390 pull request from me:

   - Host large page support for KVM guests. As the patches have large
     impact on arch/s390/mm/ this series goes out via both the KVM and
     the s390 tree.

   - Add an option for no compression to the "Kernel compression mode"
     menu, this will come in handy with the rework of the early boot
     code.

   - A large rework of the early boot code that will make life easier
     for KASAN and KASLR. With the rework the bootable uncompressed
     image is not generated anymore, only the bzImage is available. For
     debuggung purposes the new "no compression" option is used.

   - Re-enable the gcc plugins as the issue with the latent entropy
     plugin is solved with the early boot code rework.

   - More spectre relates changes:
      + Detect the etoken facility and remove expolines automatically.
      + Add expolines to a few more indirect branches.

   - A rewrite of the common I/O layer trace points to make them
     consumable by 'perf stat'.

   - Add support for format-3 PCI function measurement blocks.

   - Changes for the zcrypt driver:
      + Add attributes to indicate the load of cards and queues.
      + Restructure some code for the upcoming AP device support in KVM.

   - Build flags improvements in various Makefiles.

   - A few fixes for the kdump support.

   - A couple of patches for gcc 8 compile warning cleanup.

   - Cleanup s390 specific proc handlers.

   - Add s390 support to the restartable sequence self tests.

   - Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.

   - Lots of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
  s390/dasd: fix hanging offline processing due to canceled worker
  s390/dasd: fix panic for failed online processing
  s390/mm: fix addressing exception after suspend/resume
  rseq/selftests: add s390 support
  s390: fix br_r1_trampoline for machines without exrl
  s390/lib: use expoline for all bcr instructions
  s390/numa: move initial setup of node_to_cpumask_map
  s390/kdump: Fix elfcorehdr size calculation
  s390/cpum_sf: save TOD clock base in SDBs for time conversion
  KVM: s390: Add huge page enablement control
  s390/mm: Add huge page gmap linking support
  s390/mm: hugetlb pages within a gmap can not be freed
  KVM: s390: Add skey emulation fault handling
  s390/mm: Add huge pmd storage key handling
  s390/mm: Clear skeys for newly mapped huge guest pmds
  s390/mm: Clear huge page storage keys on enable_skey
  s390/mm: Add huge page dirty sync support
  s390/mm: Add gmap pmd invalidation and clearing
  s390/mm: Add gmap pmd notification bit setting
  s390/mm: Add gmap pmd linking
  ...
2018-08-13 19:07:17 -07:00
Rob Landley
47f38ae08d init/Kconfig: Use short unix-style option instead of --longname
Avoids warning messages with the latest release of toybox, which never
bothered to implement the --longopts nothing was using.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-09 21:50:43 +09:00
Christoph Hellwig
87a4c37599 kconfig: include kernel/Kconfig.preempt from init/Kconfig
Almost all architectures include it.  Add a ARCH_NO_PREEMPT symbol to
disable preempt support for alpha, hexagon, non-coldfire m68k and
user mode Linux.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:06:54 +09:00
Christoph Hellwig
1572497cb0 kconfig: include common Kconfig files from top-level Kconfig
Instead of duplicating the source statements in every architecture just
do it once in the toplevel Kconfig file.

Note that with this the inclusion of arch/$(SRCARCH/Kconfig moves out of
the top-level Kconfig into arch/Kconfig so that don't violate ordering
constraits while keeping a sensible menu structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Christoph Hellwig
17c46a6aff kconfig: remove duplicate SWAP symbol defintions
microblaze and nios2 define their own always n SWAP symbols.  Remove those
and let the generic defintion do the right thing by adding a new symbol
to disable swap entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-02 08:03:23 +09:00
Laura Abbott
9afb719e70 kbuild: Add build salt to the kernel and modules
In Fedora, the debug information is packaged separately (foo-debuginfo) and
can be installed separately. There's been a long standing issue where only
one version of a debuginfo info package can be installed at a time. There's
been an effort for Fedora for parallel debuginfo to rectify this problem.

Part of the requirement to allow parallel debuginfo to work is that build ids
are unique between builds. The existing upstream rpm implementation ensures
this by re-calculating the build-id using the version and release as a
seed. This doesn't work 100% for the kernel because of the vDSO which is
its own binary and doesn't get updated when embedded.

Fix this by adding some data in an ELF note for both the kernel and modules.
The data is controlled via a Kconfig option so distributions can set it
to an appropriate value to ensure uniqueness between builds.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Linus Torvalds
22d3e0c36e Kbuild fixes for v4.18
- introduce __diag_* macros and suppress -Wattribute-alias warnings from GCC 8
 
 - fix stack protector test script for x86_64
 
 - fix line number handling in Kconfig
 
 - document that '#' starts a comment in Kconfig
 
 - handle P_SYMBOL property in dump debugging of Kconfig
 
 - correct help message of LD_DEAD_CODE_DATA_ELIMINATION
 
 - fix occasional segmentation faults in Kconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbN450AAoJED2LAQed4NsGFdAP/0fc2NhkzQMvz1EBEc2n93LC
 FUXew75tsX2ZewssoLzb4Iepkb/mHU+fjhBaE65S+Xu2/6mNfId9a7HAtywvFyO2
 ZUQPXHjMHnLEPRKuzQy34uCy9/wWCiqi8rpWUsOEohmNIcLaF0vMZf5Ifod7wIr7
 pnix3b9Q+dY+l49TSsSv4MX7F9qs5fXRhEarcQ3jYEb3yRUEXgmli3hV1wRita/n
 tJhFDiIdJDeISDkgmHUuOhjFnv5Yf3WJTXi/ILZ2zvpGjjqNDAwxtyzGnPMShQEc
 fxk3/1nkg9h/ScVAaGavrYYmiiH8XsqWY2q6p52jTK3kD+yTXaVakPSmxw8UHImh
 aNWQutzMF8GYEsb+ld1ncsNrwfgd40mA25mEyb/ZPSw2IdNBrXtIVbw7XiBLi8eH
 recAlRN0MouzD7+sXafgtoKopqanQbB/rMqDO4ULfnVvZLWDmZVbfreCc+qrJtiJ
 mqydBMUVxrvB+qf5SHQ7WlDmXWHY1xQuxXzS0gRVGT14EsyD6yhC2D62pEHnB7uG
 zE1pGemOCzOlGY6nDAbtQVR1n5AAWEZYveZXUuFn+vuqR7ZtYxCFUFOS0u621zFI
 HMI9B81ifdNV2efT2VTVi6Tnnvn44sAXOYjaULX6566EyX0/mOL5CWZlTqn5SKOn
 PwNxc7ZeCylTbkZww2c4
 =oABr
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - introduce __diag_* macros and suppress -Wattribute-alias warnings
   from GCC 8

 - fix stack protector test script for x86_64

 - fix line number handling in Kconfig

 - document that '#' starts a comment in Kconfig

 - handle P_SYMBOL property in dump debugging of Kconfig

 - correct help message of LD_DEAD_CODE_DATA_ELIMINATION

 - fix occasional segmentation faults in Kconfig

* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: loop boundary condition fix
  kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
  kconfig: handle P_SYMBOL in print_symbol()
  kconfig: document Kconfig source file comments
  kconfig: fix line numbers for if-entries in menu tree
  stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
  powerpc: Remove -Wattribute-alias pragmas
  disable -Wattribute-alias warning for SYSCALL_DEFINEx()
  kbuild: add macro for controlling warnings to linux/compiler.h
2018-06-30 13:05:30 -07:00
Masahiro Yamada
8b9d271240 kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
Since commit 5d20ee3192 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION
to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is
supposed to be selected by architectures that are capable of this
functionality.  LD_DEAD_CODE_DATA_ELIMINATION is now users' selection.
Update the help message.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28 22:48:07 +09:00
Vasily Gorbik
f16466af38 init/Kconfig: add an option for uncompressed kernel
Add "None" as the kernel compression mode.

This option is useful for debugging the kernel in slow simulation
environments, where decompressing and moving the kernel is awfully slow.

Uncompressed kernel implementation might allow early boot code to skip the
decompressor and jump right at uncompressed kernel image entry point.

Platforms implementing that should define HAVE_KERNEL_UNCOMPRESSED.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25 10:14:40 +02:00
Christoph Hellwig
cf65a0f6f6 dma-mapping: move all DMA mapping code to kernel/dma
Currently the code is split over various files with dma- prefixes in the
lib/ and drives/base directories, and the number of files keeps growing.
Move them into a single directory to keep the code together and remove
the file name prefixes.  To match the irq infrastructure this directory
is placed under the kernel/ directory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-14 08:50:37 +02:00
Linus Torvalds
be779f03d5 Kbuild updates for v4.18 (2nd)
- fix some bugs introduced by the recent Kconfig syntax extension
 
  - add some symbols about compiler information in Kconfig, such as
    CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
 
  - test compiler capability for the stack protector in Kconfig, and
    clean-up Makefile
 
  - test compiler capability for GCC-plugins in Kconfig, and clean-up
    Makefile
 
  - allow to enable GCC-plugins for COMPILE_TEST
 
  - test compiler capability for KCOV in Kconfig and correct dependency
 
  - remove auto-detect mode of the GCOV format, which is now more nicely
    handled in Kconfig
 
  - test compiler capability for mprofile-kernel on PowerPC, and
    clean-up Makefile
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbISvEAAoJED2LAQed4NsGEsoQAKBHMqUM9yQo0LdVMnDMCLQI
 Xsjyqzr0ySp6YiuF+cobwDs49sggt7/8EX+OnrP/sLlAhY0QrNGI1ulhwpFx1Ewa
 xFxz5kF/1jDwC+AjngXcK5Dr9nGSSMfT3wQhLGKjMkKSypbz2QyTrfMOfHGYSzU1
 gD8RMWYXxKoJFmIaqmpLz7PDfWKPzhSOZo7BflPjAGXdlpfSV9cQvu+TkJ12qvSp
 KZ2uHUgLz95NnltSuGtN71X8so7w4eTYAvkJ5bOeOpYsZSVYRq4Exvwe0Y0dbwie
 WDpcRC5KrQOlIFxRUUSGn5cDsaW9yYJJAwMG6Dr8qJ66QlgY5GqOKXxXX+ARa7WU
 7GkeAZ11n5dArjjdSjfClh8CwDiZNpJmAUbahm+feQfUfq9nbs+0JX6bOG5ZE+nt
 3iE0ZoSGDjxD5Pjy4u+NtQM0JCpieuz3JNxqVbAVm0Ua5q8niwSEneixyrNmjkBF
 1tV+qsMYus7AFwdGuDRXzBhVY7hd931H34czA3FUZZqwcClFVoJiygI++s62mVXx
 w9kYi8Ades/W6dt7c7XGjmqYTDgnTolLaYY5vggpEeLOzc1QPW6iKt9tpREi6Zzm
 n+y586YsIo0vjTMfRcfmGZUPG3CJeqL2UDslYmG8PgMQ6/eaAHBDXECLrAkGGPlG
 aIPZcMam5BQxhmSJc19c
 =VABv
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix some bugs introduced by the recent Kconfig syntax extension

 - add some symbols about compiler information in Kconfig, such as
   CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.

 - test compiler capability for the stack protector in Kconfig, and
   clean-up Makefile

 - test compiler capability for GCC-plugins in Kconfig, and clean-up
   Makefile

 - allow to enable GCC-plugins for COMPILE_TEST

 - test compiler capability for KCOV in Kconfig and correct dependency

 - remove auto-detect mode of the GCOV format, which is now more nicely
   handled in Kconfig

 - test compiler capability for mprofile-kernel on PowerPC, and clean-up
   Makefile

 - misc cleanups

* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
  kconfig: fix localmodconfig
  sh: remove no-op macro VMLINUX_SYMBOL()
  powerpc/kbuild: move -mprofile-kernel check to Kconfig
  Documentation: kconfig: add recommended way to describe compiler support
  gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
  gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
  gcc-plugins: test plugin support in Kconfig and clean up Makefile
  gcc-plugins: move GCC version check for PowerPC to Kconfig
  kcov: test compiler capability in Kconfig and correct dependency
  gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
  arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  kconfig: add CC_IS_CLANG and CLANG_VERSION
  kconfig: add CC_IS_GCC and GCC_VERSION
  stack-protector: test compiler capability in Kconfig and drop AUTO mode
  kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
2018-06-13 08:40:34 -07:00
Linus Torvalds
d82991a868 Merge branch 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull restartable sequence support from Thomas Gleixner:
 "The restartable sequences syscall (finally):

  After a lot of back and forth discussion and massive delays caused by
  the speculative distraction of maintainers, the core set of
  restartable sequences has finally reached a consensus.

  It comes with the basic non disputed core implementation along with
  support for arm, powerpc and x86 and a full set of selftests

  It was exposed to linux-next earlier this week, so it does not fully
  comply with the merge window requirements, but there is really no
  point to drag it out for yet another cycle"

* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq/selftests: Provide Makefile, scripts, gitignore
  rseq/selftests: Provide parametrized tests
  rseq/selftests: Provide basic percpu ops test
  rseq/selftests: Provide basic test
  rseq/selftests: Provide rseq library
  selftests/lib.mk: Introduce OVERRIDE_TARGETS
  powerpc: Wire up restartable sequences system call
  powerpc: Add syscall detection for restartable sequences
  powerpc: Add support for restartable sequences
  x86: Wire up restartable sequence system call
  x86: Add support for restartable sequences
  arm: Wire up restartable sequences system call
  arm: Add syscall detection for restartable sequences
  arm: Add restartable sequences support
  rseq: Introduce restartable sequences system call
  uapi/headers: Provide types_32_64.h
2018-06-10 10:17:09 -07:00
Masahiro Yamada
469cb7376c kconfig: add CC_IS_CLANG and CLANG_VERSION
This will be useful to describe the clang version dependency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-08 18:56:01 +09:00
Masahiro Yamada
a435389898 kconfig: add CC_IS_GCC and GCC_VERSION
This will be useful to specify the required compiler version,
like this:

config FOO
        bool "Use Foo"
        depends on GCC_VERSION >= 40800
        help
          This feature requires GCC 4.8 or newer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-08 18:56:01 +09:00
Linus Torvalds
1c8c5a9d38 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...
2018-06-06 18:39:49 -07:00
Linus Torvalds
0ad39cb3d7 Kconfig updates for v4.18
Kconfig now supports new functionality to perform textual substitution.
 It has been a while since Linus suggested to move compiler option tests
 from makefiles to Kconfig. Finally, here it is. The implementation has
 been generalized into a Make-like macro language. Some built-in functions
 such as 'shell' are provided. Variables and user-defined functions are
 also supported so that 'cc-option', 'ld-option', etc. are implemented as
 macros.
 
 Summary:
 
 - refactor package checks for building {m,n,q,g}conf
 
 - remove unused/unmaintained localization support
 
 - remove Kbuild cache
 
 - drop CONFIG_CROSS_COMPILE support
 
 - replace 'option env=' with direct variable expansion
 
 - add built-in functions such as 'shell'
 
 - support variables and user-defined functions
 
 - add helper macros as as 'cc-option'
 
 - add unit tests and a document of the new macro language
 
 - add 'testconfig' to help
 
 - fix warnings from GCC 8.1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbGBJPAAoJED2LAQed4NsG9QEP/24saP6Q3uF68yOsXcyE7yL0
 VW6acNpCXFjyQZQuHB9JntD9oftSfPuY73mjVKPRvL29NopbFbe7O7wAOYSRvsZT
 cTZ5KF0FpG0enP6qUUiVpGZPGiSXKu21Lr/WrCdS889O2g5NxCB6OameQLjXkz5P
 EZb+QZD6drzYkXjipLJoliFJAhsbaACxmuCgO1gpg+qAEOm/fCnRk1qVwKffH21Z
 YlKMpw0FR3IdZA/cYp5Bh/WiICaCXs8lmMupHb4BHL4SvJGXxMEnuyt1txXANJcv
 3nTxsMPwjdCGboEgCavbcUnTaONnFK6IdGhdSntsf1aKRqHntiA/cwqmJl2RX/6v
 ObX85dRjvyKq+qh9wEGvUle0LQYxhvJJ4NyWX5+wiRB6wzPCuqTPL0I1y6UPwAkQ
 JveUswQ7u3+dCBwuHeXFHWvpviNFkWO+Gc8E2h1PKroG0Tz3HpoQclvcZjsOXrRt
 HX2+6EsuYK2LnabwQzk4TRkI7JnTKpLGG/YoM4H360bNHs5KUwgm6g5V9Oo4L3E+
 A5Jbow5siKtn7lIR9TXDou6O6F7L+bMiK+PlydPiv085EqUfhP+rkiJu9sb18GPD
 dsMXeTN51cJYLtDNiZ9tnPBtTB6Wvk7K1Dcmf3/t3rWVy35tjgl0RdxEySU153Pk
 n62ftyGGyUldBSzWcGWR
 =o37+
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:
 "Kconfig now supports new functionality to perform textual
  substitution. It has been a while since Linus suggested to move
  compiler option tests from makefiles to Kconfig. Finally, here it is.

  The implementation has been generalized into a Make-like macro
  language.

  Some built-in functions such as 'shell' are provided. Variables and
  user-defined functions are also supported so that 'cc-option',
  'ld-option', etc. are implemented as macros.

  Summary:

   - refactor package checks for building {m,n,q,g}conf

   - remove unused/unmaintained localization support

   - remove Kbuild cache

   - drop CONFIG_CROSS_COMPILE support

   - replace 'option env=' with direct variable expansion

   - add built-in functions such as 'shell'

   - support variables and user-defined functions

   - add helper macros as as 'cc-option'

   - add unit tests and a document of the new macro language

   - add 'testconfig' to help

   - fix warnings from GCC 8.1"

* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: Avoid format overflow warning from GCC 8.1
  kbuild: Move last word of nconfig help to the previous line
  kconfig: Add testconfig into make help output
  kconfig: add basic helper macros to scripts/Kconfig.include
  kconfig: show compiler version text in the top comment
  kconfig: test: add Kconfig macro language tests
  Documentation: kconfig: document a new Kconfig macro language
  kconfig: error out if a recursive variable references itself
  kconfig: add 'filename' and 'lineno' built-in variables
  kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
  kconfig: expand lefthand side of assignment statement
  kconfig: support append assignment operator
  kconfig: support simply expanded variable
  kconfig: support user-defined function and recursively expanded variable
  kconfig: begin PARAM state only when seeing a command keyword
  kconfig: replace $(UNAME_RELEASE) with function call
  kconfig: add 'shell' built-in function
  kconfig: add built-in function support
  kconfig: make default prompt of mainmenu less specific
  kconfig: remove sym_expand_string_value()
  ...
2018-06-06 11:31:45 -07:00
Linus Torvalds
8715ee75fe Kbuild updates for v4.18
- improve fixdep to coalesce consecutive slashes in dep-files
 
 - fix some issues of the maintainer string generation in deb-pkg script
 
 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts
 
 - clean-up modpost
 
 - allow to enable the dead code/data elimination for PowerPC in EXPERT mode
 
 - improve two coccinelle scripts for better performance
 
 - pass endianness and machine size flags to sparse for all architecture
 
 - misc fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbF/yvAAoJED2LAQed4NsGEPgP/2qBg7w4raGvQtblqGY1qo6j
 3xGKYUKdg3GhIRf1zB9lPwkAmQcyLKzKlet/gYoTUTLKbfRUX8wDzJf/3TV0kpLW
 QQ2HM1/jsqrD1HSO21OPJ1rzMSNn1NcOSLWSeOLWUBorHkkvAHlenJcJSOo6szJr
 tTgEN78T/9id/artkFqdG+1Q3JhnI5FfH3u0lE20Eqxk5AAxrUKArHYsgRjgOg9o
 8DlHDTRsnTiUd4TtmC+VYSZK1BHz1ORlANaRiL69T+BGFZGNCvRSV09QkaD+ObxT
 dB4TTJne32Qg6g5qYX0bzLqfRdfJ8tpmJGQkycf3OT1rLgmDbWFaaOEDQTAe3mSw
 nT6ZbpQB1OoTgMD2An9ApWfUQRfsMnujm/pRP+BkRdKKkMJvXJCH7PvFw8rjqTt3
 PjK6DGbpG6H0G+DePtthMHrz/TU6wi5MFf7kQxl0AtFmpa3R0q67VhdM04BEYNCq
 Dbs1YaXWKKi101k14oSQ0kmRasZ9Jz5tvyfZ7wvy1LpGONXxtEbc6JQyBJ6tmf4f
 fCAxvHLSb/TQSmJhk9Rch7uPYT9B9hC16dseMrF9Pab8yR346fz70L1UdFE10j3q
 iKFbYkueq8uJCJDxNktsgHzbOF6Le5vaWauOafRN26K7p7+CRpVOy0O2bknX3yDa
 hKOGzCfQjT8sfdMmtyIH
 =2LYT
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - improve fixdep to coalesce consecutive slashes in dep-files

 - fix some issues of the maintainer string generation in deb-pkg script

 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts

 - clean-up modpost

 - allow to enable the dead code/data elimination for PowerPC in EXPERT
   mode

 - improve two coccinelle scripts for better performance

 - pass endianness and machine size flags to sparse for all architecture

 - misc fixes

* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: add machine size to CHECKFLAGS
  kbuild: add endianness flag to CHEKCFLAGS
  kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
  scripts: Fixed printf format mismatch
  scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
  coccinelle: deref_null: improve performance
  coccinelle: mini_lock: improve performance
  powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
  kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
  kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
  kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
  modpost: constify *modname function argument where possible
  modpost: remove redundant is_vmlinux() test
  modpost: use strstarts() helper more widely
  modpost: pass struct elf_info pointer to get_modinfo()
  checkpatch: remove VMLINUX_SYMBOL() check
  vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
  kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
  export.h: remove code for prefixing symbols with underscore
  depmod.sh: remove symbol prefix support
  ...
2018-06-06 11:00:15 -07:00