IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The tabbed indentation in non-commands statements could be sometimes
considered as follow up for the rule command in the Makefile.
This error is hard to find, so as a precaution replacing tabs with
spaces for all non-commands statements.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://marc.info/?t=136484403900003&r=1&w=2
Link: http://lkml.kernel.org/r/20140102095304.GA1196@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently installation tests work only over x86_64, adding arch check to
make it work over i386 as well.
NOTE looks like x86 is the only arch running tests, we need some
IS_(32/64) flag to make this generic.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388759553-12974-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I need to use arch related setup in the tests/make, so moving arch setup
into Makefile.arch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388759553-12974-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That 'argc' argument _is_ being used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-t2gsxc15zulkorieg8zq996o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to call the evlist destructor when failing to parse events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ilslu69s7v7bpvdgqtrlp8f5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing further boilerplate after making sure perf_evlist__munmap can
be called multiple times for the same evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o0luenuld4abupm4nmrgzm6f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it is safe to call perf_evlist__close() multiple times, autoclose
it and remove the calls to the close from existing tools, reducing the
tooling boilerplate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2kq9v7p1rude1tqxa0aue2tk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of requiring tools to do an extra destructor call just before
calling perf_evlist__delete.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0jd2ptzyikxb5wp7inzz2ah2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be consistent with other places, use just 'evlist' for the evsel list
variable, and since we have it in 'struct record', use it directly from
there.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-396bnfvmlxrsj3o2tk47b8t1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we have the boilerplate in the preparation method, instead of
open coded in tools wanting the reporting when the exec fails.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-purbdzcphdveskh7wwmnm4t7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tool uses perf_evlist__start_workload and the supplied workload
fails (e.g.: its binary wasn't found), perror was being used to print
the error reason.
This is undesirable, as the caller may be a GUI, when it wants to have
total control of the error reporting process.
So move to using sigaction(SA_SIGINFO) + siginfo_t->sa_value->sival_int
to communicate to the caller the errno and let it print it using the UI
of its choosing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-epgcv7kjq8ll2udqfken92pz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When starting a workload 'stat' wasn't using prepare_workload evlist
method's signal based exec() error reporting mechanism.
Use it so that the we don't report 'not counted' counters.
Before:
[acme@zoo linux]$ perf stat dfadsfa
dfadsfa: No such file or directory
Performance counter stats for 'dfadsfa':
<not counted> task-clock
<not counted> context-switches
<not counted> cpu-migrations
<not counted> page-faults
<not counted> cycles
<not counted> stalled-cycles-frontend
<not supported> stalled-cycles-backend
<not counted> instructions
<not counted> branches
<not counted> branch-misses
0.001831462 seconds time elapsed
[acme@zoo linux]$
After:
[acme@zoo linux]$ perf stat dfadsfa
dfadsfa: No such file or directory
[acme@zoo linux]$
Reported-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5yui3bv7e3hitxucnjsn6z8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS0miqAAoJEHm+PkMAQRiGbfgIAJSWEfo8ludknhPcHJabBtxu
75SQAKJlL3sBVnxEc58Rtt8gsKYQIrm4IY5Slunklsn04RxuDUIQMgFoAYR5gQwz
+Myqkw/HOqDe5VStGxtLYpWnfglxVwGDCd7ISfL9AOVy5adMWBxh4Tv+qqQc7aIZ
eF7dy+DD+C6Q3Z5OoV8s0FZDxse29vOf17Nki7+7t8WMqyegYwjoOqNeqocGKsPi
eHLrJgTl4T6jB4l9LKKC154DSKjKOTSwZMWgwK8mToyNLT/ufCiKgXloIjEvZZcY
VVKUtncdHiTf+iqVojgpGBzOEeB5DM83iiapFeDiJg8C9yBzvT8lBtA9aPb5Wgw=
=lEeV
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc8' into core/locking
Refresh the tree with the latest fixes, before applying new changes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
The cpufreq-set tool has a missing length check. This is basically
just correctness but still should get fixed.
One of a set of sscanf problems reported by Jackie Chang
Signed-off-by: Alan Cox <alan@linux.intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Several areas already used this technique, so do some audit to
consistently use it elsewhere.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the frequent idiom of:
free(ptr);
ptr = NULL;
Make it expect a pointer to the pointer being freed, so that it becomes
clear at first sight that the variable being freed is being modified.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its perfectly fine to call free(NULL), so no need to clutter the source
code with all those superfluous testing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uux5wpvevlerd42gqer13e7n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some hotkeys don't work for perf top so split help messages for them.
It'll be helpful to a future modification. Also sort the message by
alphabetical order of the hotkey.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388036284-32342-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes perf top TUI breaks display with concurrent help/input window
and pr_* messages since they're not protected by ui__lock.
You can check it by pressing (and not releasing) 'h' key on a "perf top
-vvv" TUI session.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388036284-32342-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support basic dwarf(debuginfo) based operations for uprobe events. With
this change, perf probe can analyze debuginfo of user application binary
to set up new uprobe event.
This allows perf-probe --add(with local variables, line numbers) and
--line works with -x option. (Actually, --vars has already accepted -x
option)
For example, the following command shows the probe-able lines of a given
user space function. Something that so far was only available in the
'perf probe' tool for kernel space functions:
# ./perf probe -x perf --line map__load
<map__load@/home/fedora/ksrc/linux-2.6/tools/perf/util/map.c:0>
0 int map__load(struct map *map, symbol_filter_t filter)
1 {
2 const char *name = map->dso->long_name;
int nr;
5 if (dso__loaded(map->dso, map->type))
6 return 0;
8 nr = dso__load(map->dso, map, filter);
9 if (nr < 0) {
10 if (map->dso->has_build_id) {
And this shows the available variables at the given line of the
function.
# ./perf probe -x perf --vars map__load:8
Available variables at map__load:8
@<map__load+96>
char* name
struct map* map
symbol_filter_t filter
@<map__find_symbol+112>
char* name
symbol_filter_t filter
@<map__find_symbol_by_name+136>
char* name
symbol_filter_t filter
@<map_groups__find_symbol_by_name+176>
char* name
struct map* map
symbol_filter_t filter
And lastly, we can now define probe(s) with all available
variables on the given line:
# ./perf probe -x perf --add 'map__load:8 $vars'
Added new events:
probe_perf:map__load (on map__load:8 with $vars)
probe_perf:map__load_1 (on map__load:8 with $vars)
probe_perf:map__load_2 (on map__load:8 with $vars)
probe_perf:map__load_3 (on map__load:8 with $vars)
You can now use it in all perf tools, such as:
perf record -e probe_perf:map__load_3 -aR sleep 1
Changes from previous version:
- Add examples in the patch description.
- Use .text section start address and dwarf symbol address
for calculating the offset of given symbol, instead of
searching the symbol in symtab again.
With this change, we can safely handle multiple local
function instances (e.g. scnprintf in perf).
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David A. Long <dave.long@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: systemtap@sourceware.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20131226054152.22364.47021.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expand given path to absolute path in the option parser, except for a
module name.
Since realpath at later stage in processing several probe point, can be
called several times (even if currently doesn't, it can happen when we
expands the feature), it is waste of the performance.
Processing it once at the early stage can avoid that.
Changes from previous one:
- Fix not to print null string.
- Allocate memory for given path/module name everytime.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: "David A. Long" <dave.long@linaro.org>
Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: systemtap@sourceware.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20131226054150.22364.12187.stgit@kbuild-fedora.novalocal
[ Clarified the pr_warning message as per David Ahern's suggestion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the default guest is designed to handle orphan kernel symboles with
--guestkallsysms and --guestmodules, it has no user space.
So we should skip synthesizing threads if machine is default guest.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/e9ddb5dac6f963169657218b12ceb3c2030f54e8.1387572416.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we synthesize an comm event, if machine is guest, we should
use the pid of machine as the event->comm.pid, rather than tgid
of thread.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/22455abe107c618a361e7b667ad0f098f7c9b4a3.1387572416.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we synthesize the mmap events of user space, if machine is guest,
we should set the event->header.misc to PERF_RECORD_MISC_GUEST_USER,
rather than PERF_RECORD_MISC_USER.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/e6f8ff6505d2db8a4b21bff8e448bb9be0bcff35.1387572416.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we synthesize the threads, we are looking for the infomation under
/proc. But it is only for host.
This patch look for the path of proc under machine->root_dir, then
XXX__synthesize_threads() functions can support guest machines.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/927b937da9177a079abafe4532fa9c9b60b5c4b7.1387572416.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch remove a TODO in thread__find_addr_map() and add support of
PERF_RECORD_MISC_GUEST_USER.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/3dd652201171a19c910b500984c7c3590e77603b.1387572416.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, if we use perf kvm --guestkallsyms --guestmodules report, we
can not get the perf information from perf data file. All sample are
shown as unknown.
Reproducing steps:
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ]
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep %
100.00% [guest/6471] [unknown] [g] 0xffffffff8164f330
This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation).
In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine
which has the same pid, if no machine found, deliver it to *default* guest. But if we use
perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built
and added. Then the default guest which with pid == 0 will never get a symbol.
And because the new machine initialized here has no kernel map created, the symbol delivered to
it will be marked as "unknown".
This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way.
Verification steps:
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ]
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep %
22.64% :6471 [guest.kernel.kallsyms] [g] update_rq_clock.part.70
19.99% :6471 [guest.kernel.kallsyms] [g] d_free
18.46% :6471 [guest.kernel.kallsyms] [g] bio_phys_segments
16.25% :6471 [guest.kernel.kallsyms] [g] dequeue_task
12.78% :6471 [guest.kernel.kallsyms] [g] __switch_to
7.91% :6471 [guest.kernel.kallsyms] [g] scheduler_tick
1.75% :6471 [guest.kernel.kallsyms] [g] native_apic_mem_write
0.21% :6471 [guest.kernel.kallsyms] [g] apic_timer_interrupt
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: stable@vger.kernel.org # 3.3+
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1387564907-3045-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move those print functions under "if (use_browser == 0)" so that they
don't interfere with TUI output.
Maybe they can handle other UIs later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There're some places printing messages to stdout/err directly.
It should be converted to use proper error printing functions instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387516278-17024-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The addr_location struct should fully qualify an address, and to do that
it should have in it the machine where the thread was found.
Thus all functions that receive an addr_location now don't need to also
receive a 'machine', those functions just need to access al->machine
instead, just like it does with the other parts of an address location:
al->thread, al->map, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o51iiee7vyq4r3k362uvuylg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'evsel' parameter is not used, ditch it, reducing the function
signature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kx9temzdcy7mk2edya9c1tdu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'browser' arg _is_ used, so ditch the misplaced attribute.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bo4dabkip5iikhk3x384ac46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.
This actually was discussed in the "Link:" referenced message below.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using global 'O' processing code because it's already setup due to the
scripts/Makefile.include include.
Using global variable OUTPUT instead of the local BUILD_OUTPUT.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using global QUIET_CLEAN build output variable and so we could have only
single clean message:
CLEAN libtraceevent
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using global QUIET_INSTALL build output variable and factoring plugins
installation so we could have only single install message for plugins:
INSTALL trace_plugins
Getting rid of local print_install.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using global QUIET_LINK build output variable and getting rid of local
print_static_lib_build, print_plugin_build and print_shared_lib_compile.
We no longer distinguish between shared and static library in the build
message. It's differenced by the built file suffix, like:
$ make
...
LINK libtraceevent.a
LINK libtraceevent.so
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding global QUIET_CC_FPIC build output variable and getting rid of
local print_fpic_compile and print_plugin_obj_compile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using global QUIET_CC build output variable and getting rid of local
print_compile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving QUIET_(CLEAN|INSTAL) variables into:
tools/scripts/Makefile.include
to be usable by other tools. The change to use them in libtraceevent is
in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factoring make install tests to check for multiple files. Adding default
set of installed files for install and install_bin tests.
Putting the 'test' line into the log file instead to the screen as it
gets more complex now.
If the tests fails to find a file, following message is displayed:
$ make -f tests/make make_install_bin
- make_install_bin: cd . && make -f Makefile DESTDIR=/tmp/tmp.nCVuQoSHaJ install-bin
failed to find: bin/perf
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.
This actually was discussed in the "Link:" referenced message below.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its a local struct and the functions use the __ separator from the class
name to the method name, so its unlikely that this will clash with other
namespaces.
Save some typing then.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r011tdv7ianars9jr9ur2n4q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1. Since all callers either test if it is less than zero or assign its
result to an int variable, convert it from ssize_t to int;
2. There is just one use for the 'session' variable, so use rec->session
directly instead;
3. No need to store the result of perf_data_file__write, since that
result is either 'size' or -1, the later making the error result to
be stored in 'errno' and accessed thru printf's %m in the pr_err
call.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xwsk964dp681fica3xlqhjin@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the file output code to use the newly
added perf_data_file__write interface.
No functional change intended.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the perf_data_file object to handle output file processing.
No functional change intended.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-01j9ophd7tntmgrxa40uqjjm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The va_end() in _eprintf() should be removed since the caller also
invokes va_end().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1387436411-20160-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing to try to remove the code duplication introduced with mem and
branch hist entry code, this time providing prologue and epilogues to
deal with callchains when processing samples.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-js3pour59yk2aibqzb1tpumh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it is now accessed just thru addr_map_symbol and hist_entry
wrappers.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gjoam7wcfrb03sp753gk1nfk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are just wrappers to annotation methods, so move them to
annotate.c
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-336h7z0bi2k51cbfi6mkpo5k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it has a hist_entry, no need to skip the hist layer and use the
underlying symbol one.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-txsgu9umb0i86ijk888r1a0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there are three calls that could receive just the struct
addr_map_symbol pointer and call the symbol method.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d728gz1orgkaknac9ppnzd9e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since now symbol__addr_inc_samples() does the auto alloc, no need to do
it prior to calling hist_entry__inc_addr_samples.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6ife7xq2kef1nn017m04b3id@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of open coding it in multiple places in 'report' and 'top'.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ay1ushp57qsva9aw59rha5ve@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Conflicts:
drivers/net/ethernet/intel/i40e/i40e_main.c
drivers/net/macvtap.c
Both minor merge hassles, simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
The pevent_filter_strerror() function is for receiving actual error
message from pevent_errno value. To do that, add a static buffer to
event_filter for saving internal error message
If a failed function saved other information in the static buffer
returns the information, otherwise returns generic error message.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-15-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The @entry argument already has the info so no need to pass them.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1387344086-12744-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 09600e0f9e ("perf tools: Compare dso's also when comparing
symbols") added a comparison of dso when comparing symbol.
But if the sort key already has dso, it doesn't need to do it again
since entries have a different dso already filtered out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1387344086-12744-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a hist entry doesn't have symbol information, compare it with its
address. Currently it only compares its level or whether it's NULL.
This can lead to an undesired result like an overhead exceeds 100%
especially when callchain accumulation is enabled by later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1387344086-12744-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind found that extracted labels that are passed from the lexer
weren't freed upon exit. Therefore, add a small helper function that
walks label tables and frees them. Since also NULL can be passed to
free(3), we do not need to take care of that here. While at it, fix
up a spacing error in bpf_set_curr_label().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must not leave the socket intact in bpf_runnable(). The socket
is used to test if the filter code is being accepted by the kernel
or not. So right after we do the setsockopt(2), we need to close
it again.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Those functions stringify filter arguments.
As caller of those functions handles NULL string properly, it seems that
it's enough to return NULL rather than calling die().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/878uvkgx9f.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was called "data_type", but in this context "data" is way too vague,
it could mean the "data" ELF segment, or something else.
Since we have dso__read_binary_type_filename() and the values this field
receives are all DSO__BINARY_TYPE_<FOO> we may as well call it
"binary_type" for consistency sake.
It also seems more appropriate since it determines if we can do
operations like annotation and DWARF unwinding, that needs more than
just the symtab, requiring access to ELF text segments, CFI ELF
sections, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2lkbqrn23uc2uvnn9w9in379@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This option highlights tasks (using different color) that run more than
given duration or tasks with given name.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/20131217155349.GA13021@stfomichev-desktop
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a user calls 'cpupower set --perf-bias 15', the process will end with
a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi
call. This is because the getopt_long structure currently has all of
the options as having an optional_argument when they really have a
required argument. We change the structure to use required_argument to
match the short options and it resolves the issue.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Thomas Renninger <trenn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSrhGrAAoJEHm+PkMAQRiGsNoH/jIK3CsQ2lbW7yRLXmfgtbzz
i2Kep6D4SDvmaLpLYOVC8xNYTiE8jtTbSXHomwP5wMZ63MQDhBfnEWsEWqeZ9+D9
3Q46p0QWuoBgYu2VGkoxTfygkT6hhSpwWIi3SeImbY4fg57OHiUil/+YGhORM4Qc
K4549OCTY3sIrgmWL77gzqjRUo+pQ4C73NKqZ3+5nlOmYBZC1yugk8mFwEpQkwhK
4NRNU760Fo+XIht/bINqRiPMddzC15p0mxvJy3cDW8bZa1tFSS9SB7AQUULBbcHL
+2dFlFOEb5SV1sNiNPrJ0W+h2qUh2e7kPB0F8epaBppgbwVdyQoC2u4uuLV2ZN0=
=lI2r
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc4' into core/locking
Merge Linux 3.13-rc4, to refresh this rather old tree with the latest fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Using dso__binary_type_file() make it look like this function will
return a file, not just its filename, so rename it to:
dso__read_binary_type_filename()
to make its purpose clear, just like we have:
dso__read_running_kernel_build_id()
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vkf3upzrfrxtr01wueej4xw4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no references to that array anywhere, it is only used to try
a series of "binary" types in turn, always setting dso->data_type till
one can be used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4mw7xrbs12tln6v2uthg7sqc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Print all CPUs, even if there were no events (use perf header to get
number of CPUs).
This is required to support topology in the next patch.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1385995056-20158-4-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add PID to the figures of CPU usage timechart.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1385995056-20158-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add backtrace info to the CPU usage timechart.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Link: http://lkml.kernel.org/r/1385995056-20158-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move debugfs.* to api/fs/. We have a common tools/lib/api/ place where
the Makefile lives and then we place the headers in subdirs.
For example, all the fs-related stuff goes to tools/lib/api/fs/ from
which we get libapikfs.a (acme got almost the naming he wanted :-)) and
we link it into the tools which need it - in this case perf and
tools/vm/page-types.
acme:
"Looking at the implementation, I think some tools can even link
directly to the .o files, avoiding the .a file altogether.
But that is just an optimization/finer granularity tools/lib/
cherrypicking that toolers can make use of."
Fixup documentation cleaning target while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386605664-24041-2-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes:
. Fix inverted error verification bug in thread__fork, from David Ahern.
New features:
. Shell completion for 'perf kvm', from Ramkumar Ramachandra.
Refactorings:
. Get rid of panic() like calls in libtraceevent, from Namyung Kim.
. Start carving out symbol parsing routines from perf, just moving routines to
topic files in tools/lib/symbol/, tools that want to use it need to integrate
it directly, i.e. no tools/lib/symbol/Makefile is provided.
. Assorted refactoring patches, moving code around and adding
utility evlist methods that will be used in the IPT patchset,
from Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=qcLZ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Fixes:
* Fix inverted error verification bug in thread__fork, from David Ahern.
New features:
* Shell completion for 'perf kvm', from Ramkumar Ramachandra.
Refactorings:
* Get rid of panic() like calls in libtraceevent, from Namyung Kim.
* Start carving out symbol parsing routines from perf, just moving routines to
topic files in tools/lib/symbol/, tools that want to use it need to integrate
it directly, i.e. no tools/lib/symbol/Makefile is provided.
* Assorted refactoring patches, moving code around and adding
utility evlist methods that will be used in the IPT patchset,
from Adrian Hunter.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The test_filter() function is for testing given filter is matched to a
given record. However it doesn't handle error cases properly so add a
new argument err to save error info during the test and also pass it to
internal test functions.
The return value of pevent_filter_match() also converted to pevent_errno
to indicate an exact error case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor the pevent_filter_add_filter_str() to return a proper error
code and get rid of the third error_str argument.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can return a proper pevent_errno value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can return a proper pevent_errno value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To do that, make the function returns the error code. Also pass
error_str so that it can set proper error message when error occurred.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can propagate error properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make it return pevent_errno to distinguish malloc allocation failure.
Since it'll be returned to user later, add more error code.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Also check return value and handle it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The realloc() should check return value and not to overwrite previous
pointer in case of error.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386833777-3790-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to move a selected event to the
front of the list.
This is needed because it is not possible
to use the PERF_EVENT_IOC_SET_OUTPUT IOCTL
from an Instruction Tracing event to a
non-Instruction Tracing event. Thus the
Instruction Tracing event must come first.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386765443-26966-24-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 1902efe7f for the new comm infra added the wrong check for return
code on thread__set_comm. err == 0 is normal, so don't return at that
point unless err != 0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1386736538-23525-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move functions mem_bswap_32() and mem_bswap_64() so they can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386765443-26966-21-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to determine whether an event can be selected.
This function is needed to allow a tool to automatically select
additional events, but only if they are available.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386765443-26966-18-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be necessary to predetermine header->data_offset to allow space
for attributes that are added later. Consequently, do not change
header->data_offset if it is non-zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386765443-26966-17-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to return the value of
/proc/sys/kernel/perf_event_paranoid.
This will be used to determine default values for mmap size because perf
is not subject to mmap limits when perf_event_paranoid is less than
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386765443-26966-12-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eventually this should be useful to other tools/ living utilities.
For now don't try to build any .a, just trying the minimal approach of
separating existing code into multiple .c files that can then be
included wherever they are needed, using whatever build machinery
already in place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfa8i5zpf4bf9rcccryi0lt3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the added variable ${KERNEL_VERSION}, it is useful to be
able to use parts of it for other variables.
For example, if you want to create a warnings file for each major
kernel version to test sub versions against you can create
your warnings file with like this:
WARNINGS_FILE = warnings-file-${KERNEL_VERSION}
But this may add 3.8.12 or something, and we want all 3.8.* to
use the same file, and 3.10.* to use another file, and so on.
With the eval command we can, by adding:
WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/
Which will chop off the extra characters after the 3.8.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are a couple of valid use cases for a minimal low-level bpf asm
like tool, for example, using/linking to libpcap is not an option, the
required BPF filters use Linux extensions that are not supported by
libpcap's compiler, a filter might be more complex and not cleanly
implementable with libpcap's compiler, particular filter codes should
be optimized differently than libpcap's internal BPF compiler does,
or for security audits of emitted BPF JIT code for prepared set of BPF
instructions resp. BPF JIT compiler development in general.
Then, in such cases writing such a filter in low-level syntax can be
an good alternative, for example, xt_bpf and cls_bpf users might have
requirements that could result in more complex filter code, or one that
cannot be expressed with libpcap (e.g. different return codes in
cls_bpf for flowids on various BPF code paths).
Moreover, BPF JIT implementors may wish to manually write test cases
in order to verify the resulting JIT image, and thus need low-level
access to BPF code generation as well. Therefore, complete the available
toolchain for BPF with this small bpf_asm helper tool for the tools/net/
directory. These 3 complementary minimal helper tools round up and
facilitate BPF development.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a minimal BPF debugger that "emulates" the kernel's
BPF engine (w/o extensions) and allows for single stepping (forwards
and backwards through BPF code) or running with >=1 breakpoints through
selected or all packets from a pcap file with a provided user filter
in order to facilitate verification of a BPF program. When a breakpoint
is being hit, it dumps all register contents, decoded instructions and
in case of branches both decoded branch targets as well as other useful
information.
Having this facility is in particular useful to verify BPF programs
against given test traffic *before* attaching to a live system.
With the general availability of cls_bpf, xt_bpf, socket filters,
team driver and e.g. PTP code, all BPF users, quite often a single
more complex BPF program is being used. Reasons for a more complex
BPF program are primarily to optimize execution time for making a
verdict when multiple simple BPF programs are combined into one in
order to prevent parsing same headers multiple times. In particular,
for cls_bpf that can have various return paths for encoding flowids,
and xt_bpf to come to a fw verdict this can be the case.
Therefore, as this can result in more complex and harder to debug
code, it would be very useful to have this minimal tool for testing
purposes. It can also be of help for BPF JIT developers as filters
are "test attached" to the kernel on a temporary socket thus
triggering a JIT image dump when enabled. The tool uses an interactive
libreadline shell with auto-completion and history support.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a special variable that can be used in other variables called
${KERNEL_VERSION}. This will embed the current kernel version into
the variable. For example:
WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION}
If the current version is v3.8 then the WARNINGS_FILE will become
${OUTPUT_DIR}/warnings-v3.8
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Add an option in 'perf script' to print the source line number, from Adrian Hunter
. Add --header/--header-only options to 'script' and 'report', the default is not
tho show the header info, but as this has been the default for some time,
leave a single line explaining how to obtain that information, from Jiri Olsa.
. Fix symoff printing in callchains in 'perf script', from Adrian Hunter.
. Assorted mmap_pages handling fixes, from Adrian Hunter.
. Fix summary percentage when processing files in 'perf trace', fom David Ahern.
. Handle old kernels where the "raw_syscalls" tracepoints were called plan "syscalls",
in 'perf trace', from David Ahern.
. Several man pages typo fixes from Dongsheng Yang.
. Add '-v' option to 'perf kvm', from Dongsheng Yang.
. Make perf kvm diff support --guestmount, from Dongsheng Yang.
. Get rid of several die() calls in libtraceevent, from Namhyung Kim.
. Use basename() in a more robust way, to avoid problems related to different
system library implementations for that function, from Stephane Eranian.
. Remove open coded management of short_name_allocated member, from Adrian Hunter
. Several cleanups in the "dso" methods, constifying some parameters and
renaming some fields to clarify its purpose.
. Add per-feature check flags, fixing libunwind related build problems on some
architectures, from Jean Pihet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=0wIi
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Add an option in 'perf script' to print the source line number, from Adrian Hunter
* Add --header/--header-only options to 'script' and 'report', the default is not
tho show the header info, but as this has been the default for some time,
leave a single line explaining how to obtain that information, from Jiri Olsa.
* Fix symoff printing in callchains in 'perf script', from Adrian Hunter.
* Assorted mmap_pages handling fixes, from Adrian Hunter.
* Fix summary percentage when processing files in 'perf trace', from David Ahern.
* Handle old kernels where the "raw_syscalls" tracepoints were called plan "syscalls",
in 'perf trace', from David Ahern.
* Several man pages typo fixes from Dongsheng Yang.
* Add '-v' option to 'perf kvm', from Dongsheng Yang.
* Make perf kvm diff support --guestmount, from Dongsheng Yang.
* Get rid of several die() calls in libtraceevent, from Namhyung Kim.
* Use basename() in a more robust way, to avoid problems related to different
system library implementations for that function, from Stephane Eranian.
* Remove open coded management of short_name_allocated member, from Adrian Hunter
* Several cleanups in the "dso" methods, constifying some parameters and
renaming some fields to clarify its purpose. (Arnaldo Carvalho de Melo.)
* Add per-feature check flags, fixing libunwind related build problems on some
architectures, from Jean Pihet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the per-feature check flags for the unwinding feature in order to
correctly compile the test-all, libunwind and libunwind-debug-frame
feature checks.
Tested on x86_64, ARMv7 and ARMv8 with and without LIBUNWIND_DIR set in
'make -C tools/perf'
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add CFLAGS and LDFLAGS for each feature to be checked. This allows to
pass flags and parameters to the feature checks compilation. Also
simplifies the feature check makefile, to come in a subsequent patch.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-2-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The basename() implementation varies a lot between systems.
The Linux man page says: "basename may modify the content of the path,
so it may be desirable to pass a copy when calling the function".
On some other systems, the returned address may come from an internal
buffer which can be reused in subsequent calls, thus the results should
also be copied.
The dso__set_basename() function was not doing this causing problems
on some systems with wrong library names being shown by perf report,
such as on Android systems.
This patch fixes the problem.
The patch is relative to tip.git.
In v2, we clean up the comments based on Ingo's feedback.
Reported-by: Ben Cheng <bccheng@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Cheng <bccheng@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131205182642.GA14614@quad
[ v3: Fixed up wrt allocated flag now being set in dso__set_short_name ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'file' is more commonly associated with a file descriptor of
some sort, rename it to 'filename' as this is the more common idiom
for a file name argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those methods are not supposed to change the data structures they
manipulate, so make that clearer by using the const qualifier in the
function signature and in some variables.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j7oyakex7zy3r82h33rdw25x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging use after free bugs.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ckwsob2g1q23s77nuhexrq7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Same reason as for dso->short_name, it may point to a const string, and
in most places it is treated as const, i.e. it is just accessed for
using its contents as a key or to show it on reports.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nf7mxf33zt5qw207pbxxryot@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_long_name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-na7t1tqim22vuqkt4zq5n4ri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparatory patch to do with dso__set_long_name what was done
with the short name variant.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mb7eqhkyejq1qcf3p22wz2x7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_short_name.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/52A707A2.5020802@intel.com
[ Renamed the 'allocated' parameter to clearly indicate to which variable it refers to. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use dso__set_short_name instead, as it will release any previously,
possibly allocated, short name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1v39elw7v6nxczpntpp7ljwr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we now have:
dso->short_name
dso->short_name_len
dso->short_name_allocated
Ditto for the 'long variants. To more quickly grasp what they refer to.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nu228f8vlp9w0lr7c0q77dqi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the perf.data header is always displayed for stdio output,
which is no always useful.
Disabling header information by default and adding following options to
control header output:
--header - display header information
--header-only - display header information only w/o further
processing
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the perf.data header is always displayed for stdio output,
which is no always useful.
Disabling header information by default and adding following options to
control header output:
--header - display header information (old default)
--header-only - display header information only w/o further
processing, forces stdio output
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com
[ Added single line explaining talking about the new --header* options,
to address David Ahern comment; better man page entry for the new options,
from Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the function signature to return error code and not call die()
anymore.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make it return error value since its only caller find_event() now can
handle allocation error properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It returns NULL when allocation fails so the users should check the
return value from now on.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386567251-22751-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In manpage of perf-kvm, --guestmount is supported by diff command, but
it does not work well.
This patch change the extend the checking in buildid-diff from
guestkallsyms or guestmodules to perf_guest. Then this checking can
cover the all cases perf kvm is used for.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/72857ed89642e0633f5e88f7e7abbc9645359e8e.1386368672.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code in builtin-kvm.c to generate filename for perf-kvm is useful to
other command such as builtin-diff.
This patch move the related code form builtin-kvm.c to util/util.c and
wrap them in a function named get_filename_for_perf_kvm.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/5e09a5c47e8a495e888cbdc65a6fafb2c950f529.1386368672.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use perf kvm record-report, there is a bug in report subcommand.
Example:
# perf kvm stat record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.678 MB perf.data.guest (~29641 samples) ]
# perf kvm stat report
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
This bug was introduced by f5fc14124.
+ struct perf_data_file file = {
+ .path = input_name,
+ .mode = PERF_DATA_MODE_READ,
+ };
kvm->tool = eops;
- kvm->session = perf_session__new(kvm->file_name, O_RDONLY, 0, false,
- &kvm->tool);
+ kvm->session = perf_session__new(&file, false, &kvm->tool);
It changed the path from kvm->file_name to input_name, this patch change the path back to
'kvm->file_name', then it works well.
Verification:
# perf kvm stat record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.807 MB perf.data.guest (~35264 samples) ]
# perf kvm stat report
Analyze events for all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EPT_VIOLATION 200 32.79% 1.25% 0us 12064us 62.35us ( +- 96.74% )
EPT_MISCONFIG 134 21.97% 0.21% 0us 35us 15.25us ( +- 4.14% )
EXCEPTION_NMI 96 15.74% 0.02% 0us 11us 1.95us ( +- 9.81% )
APIC_ACCESS 79 12.95% 0.02% 0us 13us 2.94us ( +- 11.20% )
HLT 65 10.66% 98.47% 0us 16706us 15084.86us ( +- 1.89% )
IO_INSTRUCTION 27 4.43% 0.02% 0us 29us 6.42us ( +- 15.53% )
EXTERNAL_INTERRUPT 5 0.82% 0.01% 0us 77us 23.65us ( +- 57.90% )
TPR_BELOW_THRESHOLD 4 0.66% 0.00% 0us 1us 1.22us ( +- 4.36% )
Total Samples:610, Total events handled time:995745.54us.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1386632823-17539-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As there is no -v option for perf kvm, the all debug message for perf
kvm will nerver be printed out to user.
Example:
# perf kvm --guestmount /tmp/guestmount/ record -a
Not enough memory for reading perf file header
It is confusing message for newbies such as me. With this patch applied,
we can use -v option to get the detail.
Example:
# perf kvm --guestmount /tmp/guestmount/ record -a -v
Can't access file /tmp/guestmount//15069/proc/kallsyms
Not enough memory for reading perf file header
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386609311-23889-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'next_pow2()' only works for 'unsigned int' but the argument is
'unsigned long'. Checking for values less than (1 << 31) ensures that
'next_pow2()' is not passed a value out of range but lets anything else
go through unvalidated.
As a result mmap_pages of zero is used e.g.
perf record -v -m2147483649 uname
mmap size 0B
failed to mmap with 22 (Invalid argument)
Fixed:
perf record -m2147483649 uname
rounding mmap pages size to 17592186044416 bytes (4294967296 pages)
Invalid argument for --mmap_pages/-m
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'SIZE_MAX / page_size' is an upper limit for the maximum number of mmap
pages, not a lower limit. Change the condition accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'mmap_pages' is 'unsigned int' not 'int' e.g.
perf record -m2147483648 uname
Permission error mapping pages.
Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
or try again with a smaller value of -m/--mmap_pages.
(current value: -2147483648)
Fixed:
perf record -m2147483648 uname
Permission error mapping pages.
Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
or try again with a smaller value of -m/--mmap_pages.
(current value: 2147483648)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add field 'srcline' that displays the source file name and line number
associated with the sample ip. The information displayed is the same as
from addr2line.
$ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline
grep 10701/10701 2497321.421013: ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
grep 10701/10701 2497321.421984: ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
grep 10701/10701 2497321.421990: ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
grep 10701/10701 2497321.421992: ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])
/usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The address being used to calculate the offset was the memory address
but the address needed is the address mapped to the dso. i.e. the 'addr'
member of 'struct addr_location'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With very old libc headers the inclusion of sys/types.h causes conflicts
with linux/types.h. Since the latter is not required anyway, remove it
from the source files. If any of the headers really needs linux/types.h
it has to include it itself.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so I'm not
including a revert that Sarah requested, because that breaks a USB network
driver, and I can't revert the USB network driver fix without reintroducing
other bugs that it fixed. So as it is, everything should now be
working. Worse case, I can revert the XHCI fix before 3.13-final is
out, but it seems to work well here with my testing, so all should be
good.
Other than that, some driver updates based on reports.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlKiEuYACgkQMUfUDdst+ymE8ACgnDT8s4FtrYfoyOo5K4TVTRaZ
S2wAn3+Xa2TX1Sym+ltJry7N1jRnY2Qy
=JUaB
-----END PGP SIGNATURE-----
Merge tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 3.13-rc3.
Nothing major, but we seem to have an argument about a XHCI fix, so
I'm not including a revert that Sarah requested, because that breaks a
USB network driver, and I can't revert the USB network driver fix
without reintroducing other bugs that it fixed. So as it is,
everything should now be working. Worse case, I can revert the XHCI
fix before 3.13-final is out, but it seems to work well here with my
testing, so all should be good.
Other than that, some driver updates based on reports"
* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
usb: ohci-pxa27x: include linux/dma-mapping.h
USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
usb: tools: fix a regression issue that gcc can't link to pthread
USB: switch maintainership of chipidea to Peter
USB: pl2303: fixed handling of CS5 setting
USB: ftdi_sio: fixed handling of unsupported CSIZE setting
USB: mos7840: correct handling of CS5 setting
USB: spcp8x5: correct handling of CS5 setting
usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
usb: wusbcore: do device lookup while holding the hc mutex
usb: wusbcore: send keepalives to unauthenticated devices
USB: option: support new huawei devices
USB: serial: option: blacklist interface 1 for Huawei E173s-6
usb: xhci: Link TRB must not occur within a USB payload burst
usb: gadget: f_mass_storage: call try_to_freeze only when its safe
usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
usb: gadget: ffs: fix sparse warning
usb: gadget: zero: module parameters can be static
usb: gadget: storage: fix sparse warning
...
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When Jiri Olsa was writing a function callback for
scsi_trace_parse_cdb(), he thought that the traceevent library had a
bug in it because he was getting this error:
Error: expected ')' but read ','
Error: expected ')' but read ','
Error: expected ')' but read ','
Error: expected ')' but read ','
But in truth, he didn't have the write number of arguments for the
function callback, and the error was the library detecting the
discrepancy. A better error message would have prevented the confusion:
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_timeout has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_start has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_error has more
Error: function 'scsi_trace_parse_cdb()' only expects 2 arguments but event scsi_dispatch_cmd_done has more
Or
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_timeout only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_start only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_error only uses 3
Error: function 'scsi_trace_parse_cdb()' expects 4 arguments but event scsi_dispatch_cmd_done only uses 3
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-a4c34w62vl0diitvxb7bt3er@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting a divide by 0 when events are processed from a file:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, inf%, 0.000 msec
The problem is that the event count is not incremented as events are
processed. With this patch:
perf trace -i perf.data -s
...
dnsmasq (1684), 10 events, 8.9%, 0.000 msec
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels (e.g., RHEL6) do system call tracing via
syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to
detect lack of raw_syscalls support and try syscalls.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The traceevents-plugins install targets needs a proper dependency,
otherwise it might be executed prematurely and in parallel to an
actual build.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-rvlbzena4ovzgqiPm6teBofz@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reproduce:
ray@hr-bak:~/usb$ make -C tools/usb/
make: Entering directory `/home/ray/usb/tools/usb'
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
/tmp/cc0EMxfy.o: In function `main':
/home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create'
/home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
make: *** [testusb] Error 1
make: Leaving directory `/home/ray/usb/tools/usb'
Comments:
In the latest version (4.7.3) of gcc compiler, it requres that
libraries must follow the object or source files like below:
"gcc hello.c -lpthread" instead of "gcc -lpthread hello.c"
And it isn't encountered at gcc version 4.7.2.
So this patch fix to move the pthread option after testusb.c.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing malloc_or_die calls from plugin_function.c, replacing them and
factoring the code with standard realloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-27-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several cleanups suggested by Namhyung:
* Remove index field from struct func_stack as it's not needed.
* Rename get_index into add_and_get_index.
* Use '%*X' format string capability instead of the loop
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pevent_print_func_field function encompasses all the functionality
used in the hrtimer_start handler. Change the handler to use this
function.
This also unifies the function field output with the
hrtimer_expire_entry handler.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for following functions to be global:
process_jbd2_dev_to_name
process_jiffies_to_msecs
Make them static.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-24-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing malloc_or_die calls from event-plugin.c,
replacing them with standard malloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting mac80211 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds changed field resolving for
mac80211:drv_bss_info_changed tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'mac80211:drv_bss_info_changed' -a')
--- script.mac80211.old
+++ script.mac80211.new
- ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) changed:0x309f
+ ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2)
+ assoc:0 aid:2 cts:0 shortpre:0 shortslot:0 dtimper:1
+ bcnint:102 assoc_cap:0x431 basic_rates:0xf enable_beacon:0
+ ht_operation_mode:0
Omitting the mac80211:drv_config tracepoint handling because the kernel
tracepoint changed its prototype and the plugin handler is no longer
working.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting hrtimer plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function field resolving for following tracepoint
events:
timer:hrtimer_expire_entry
timer:hrtimer_start
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'timer:hrtimer*' -a')
--- script.hrtimer.old
+++ script.hrtimer.new
- swapper 0 [000] 27405.519092: timer:hrtimer_start: [FAILED TO PARSE] hrtimer=0xffff88021e20e800 function=0xffffffff810c0e10 expires=27398383000000 softexpires=27398383000000
+ swapper 0 [000] 27405.519103: timer:hrtimer_start: hrtimer=0xffff88021e20e800 function=tick_sched_timer expires=27398383000000 softexpires=27398383000000
- swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: [FAILED TO PARSE] hrtimer=0xffff880211334058 now=27398294182491 function=0xffffffff81086f20
+ swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: hrtimer=0xffff880211334058 now=27398294182491 function=posix_timer_fn/0x0
Check the 'function' field is translated into the function name.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-14-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The traceevent lib uses pr_stat to display all standard info. It's
defined as __weak. Overloading it with perf version plugged into perf
output system logic.
Displaying the pr_stat stuff under '-v' option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.
Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.
This function uses properly initialized global trace-event object,
ensuring proper plugins processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add trace-event object to keep together 'struct pevent' object with its
loaded plugins with following interface:
int trace_event__init(struct trace_event *t);
- Initalizes 'struct pevent' object and loads plugins for it
void trace_event__cleanup(struct trace_event *t);
- Cleanups both 'struct pevent' and plugins
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding filename__read_str util function to read
text file and return it in the char array.
The interface is:
int filename__read_str(const char *filename, char **buf, size_t *sizep)
Returns 0/-1 if the read suceeded/fail respectively.
buf - place to store the data pointer
size - place to store data size
v2 change:
- better error handling suggested by Namhyung Kim.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing the 'to ...' part out of the install message, because it does
not fit to the rest of the build messages we use.
Before:
INSTALL plugin_hrtimer.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_jbd2.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kmem.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kvm.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_mac80211.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_sched_switch.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_function.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_xen.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_scsi.so to /home/jolsa/libexec/perf-core/traceevent/plugins
Now:
INSTALL plugin_jbd2.so
INSTALL plugin_hrtimer.so
INSTALL plugin_kmem.so
INSTALL plugin_kvm.so
INSTALL plugin_mac80211.so
INSTALL plugin_sched_switch.so
INSTALL plugin_function.so
INSTALL plugin_xen.so
INSTALL plugin_scsi.so
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the pevent_parse_format interface to include the pevent handle.
The goal is to always use pevent object when dealing with traceevent
library. The reason is that we might need additional processing (like
plugins), which is not possible otherwise.
Patches follow to make this happen completely.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding traceevent_host_bigendian function to get host endianity. It's
used in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-5-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting missing pieces of plugin building infrastructure:
- Adding Makefile 'plugins' target to build all
defined plugins
- Adding Makefile 'install_plugins' target as 'install_lib'
target dependency
- Link plugin objects with shared object building
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
Plugins are by default installed into following locations:
'$(HOME)/.traceevent/plugins'
- If we are installing under $(HOME)
'$(prefix)/lib/traceevent/plugins'
- Otherwise
This path is propagated to the plugin object as a plugins search path.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backporting plugin support for traceevent lib.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
It's now possible to use following interface to load plugins
(shared objects) to enhance pevent object functionality.
The plugin interface/hooks are as follows:
(taken from event-parse.h comments)
- 'pevent_plugin_loader' (required)
The function name to initialized the plugin.
int pevent_plugin_loader(struct pevent *pevent)
- 'pevent_plugin_unloader' (optional)
The function called just before unloading
int pevent_plugin_unloader(void)
- 'pevent_plugin_options' (optional)
Plugin options that can be set before loading
struct plugin_option pevent_plugin_options[] = {
{
.name = "option-name",
.plugin_alias = "overide-file-name", (optional)
.description = "description of option to show users",
},
{
.name = NULL,
},
};
Array must end with .name = NULL;
The plugin_alias (below) can be used to give a shorter
name to access the variable. Useful if a plugin handles
more than one event.
NOTE options support is not backported yet.
- 'pevent_plugin_alias' (optional)
The name to use for finding options (uses filename if not defined)
New traceevent functions are added to search and load
available plugins:
struct plugin_list*
traceevent_load_plugins(struct pevent *pevent)
- loads plusing for 'struct pevent' object and returns
loaded plugins list
void traceevent_unload_plugins(struct plugin_list *plugin_list);
- unload plugin list
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event__preprocess_sample() function is called in
process_sample_event(). Instead of calling it again in
perf_evsel__print_ip(), pass through the resultant addr_location.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/529F3944.9050007@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When built without libelf, perf tools was failing to initialize a file
descriptor, but nevertheless closing it. That sometimes resulted in the
output being truncated because the stdout file descriptor got closed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386166981-30197-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we have changed the default behavior of 'perf kvm' to --guest
enabled, the parts of the man page that covers the 'record' subcommand
are outdated.
This patch updates it to show the correct output with
--host/--guest/neither/both of them.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/3a3a9c1e05acb5a274d1d8369db5a4c6467d6276.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As option --host and --guest request no input for it, there should not
be a '=' after them in the man page sources.
And --output expects a filename as the input, so there should be a '='
after it.
This patch removes the needless '=' after --guest and --host, and adds a
'=' after --output in perf-kvm.txt.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/6124d9eb10a3f1f6b399d1db660110bc7a60fd6b.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the buildid is read from /sys/kernel/notes, then if we use perf kvm
buildid-list with a perf data file captured by perf kvm record with
--guestkallsyms and --guestmodules, there is no result in output.
This patch add a explanation about it and add a limit of using perf kvm
buildid-list.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d605a805486340b53bc261aa64d7632ad0a8cf53.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check for cpu_map__dummy_new() or cpu_map__new() to be called in
perf_evlist__create_maps() is more complicated.
This patch moves the checking work into target.h, combining two
conditions and making perf_evlist__create_maps() more readable.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/b8c41f1fd2c4f0df71eb7b19aea74fb64d46cdda.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In machine__get_kernel_start_addr, the code, which is using
machine->root_dir to build filename, works for both host and guests
initialized from guestmount, as root_dir is set to "" for the host
machine in the machine__init() function.
So this patch remove the branch for machine__is_host.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/0a81645dd0b384a12cb4f962cf193ef8c3ce2010.1386197481.git.yangds.fnst@cn.fujitsu.com
[ Clarified changeset mentioning root_dir setup in machine__init() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use -fstack-protector-all option to enable stack protecting for all
available functions. There's no reason for enabling -Wstack-protector to
get warning for unprotected functions.
Removing stackprotector feature check which was used to enable the
-Wstack-protector option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Looking up an ip's source file name and line number does not succeed
always. Current logic disables the lookup for a dso entirely on any
failure. Change it so that disabling never happens if there has ever
been a successful lookup for that dso but disable if the first 123
lookups fail.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, lookup of an ip's source file name and line number is done
using the dso file name.
Instead retain the file name used to lookup the dso's symbols and use
that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Closng and re-opening for every lookup when using libbfd to lookup
source file name and line number is very very slow. Instead keep the
reference on struct dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The asprintf library function is equivalent to malloc plus snprintf so
use it because it is simpler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All of the rcutorture scripts has the usual GPL header, which contains
a long-obsolete postal address for FSF. To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The output of the rcutorture scripts often requires interpretation, so
this commit simplifies this interpretation by tagging messages as
BUGs (colored red) or WARNINGs (colored yellow).
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Repeatedly running a given test, for example, by repeating the name
as in "--configs "TREE08 TREE08 TREE08" records the results only of
the last run of this test. This is because the earlier results are
overwritten by the later results.
This commit therefore checks for earlier results, using numbered
file extensions to distinguish multiple runs. The earlier example
would therefore create directories TREE01, TREE01.2, and TREE01.3.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The commit causes kvm.sh to invoke kvm-recheck.sh at the end of each
run, and causes kvm-recheck.sh to print only the name of the test, not
the full path to the corresponding Kconfig file.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
The TREE08 Kconfig fragment does not enable tracing, which is appropriate
for its test case. However, this can be inconvenient in cases where
TREE08 locates RCU bugs. This commit therefore adds a TREE08-T that
differs from TREE08 only in enabling CONFIG_RCU_TRACE.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds the --kmake-arg to kvm.sh, which allows passing in
things like "V=1" to see the build commands, as well as enabling the
CROSS_COMPILE= make macro used for cross-building.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds the --no-initrd argument to kvm.sh, which permits
initrd to be contained in a root partition specified by the --bootargs
argument. Without --no-initrd, the kernel build expects an initrd
directory in the same rcutorture directory that contains bin and configs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commits adds the --qemu-args argument to kvm.sh that is required
to pass boot devices down through to qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit allows easy specification of trace_event lists, among other
things.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
This commit adds --buildonly, which does the builds specified by the
--configs argument, but does not boot or test the resulting kernels.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Don't grab the configuration fragment from the configs directory because
it might well have been changed since the test was run. Instead, use
the ConfigFragment file that was placed in the results directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
As it stands, the default kernel boot parameters generated from
the Kconfig fragment will override any supplied with the .boot
file that can optionally accompany a Kconfig fragment. Rearrange
ordering to permit the specific .boot arguments to override those
generated by analyzing the Kconfig fragment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
