IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The suspend code unconditionally sets ->hp_jack_in and ->mic_jack_in
to zero but without reporting this status change to the HDA core.
To compensate for this, always assume a status change on the
first unsol event after boot or resume.
Fixes: 424e531b47f8 ("ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231134432.atwmuzeceqiklcoa@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit c8b4f0865e82 reduced delays related to cs42l42 jack
detection. However, the change was too aggressive. As a result
internal speakers on DELL Inspirion 3501 are not detected.
Increase the delay in cs42l42_run_jack_detect() a bit.
Fixes: c8b4f0865e82 ("ALSA: hda/cs8409: Remove unnecessary delays")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231131221.itwotyfk5qomn7n6@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For cs8409, it is required to run Jack Detect on resume.
Jack Detect on cs8409+cs42l42 requires an interrupt from
cs42l42 to be sent to cs8409 which is propogated to the driver
via an unsolicited event.
However, the hda_codec drops unsolicited events if the power_state
is not set to PMSG_ON. Which is set at the end of the resume call.
This means there is a race condition between setting power_state
to PMSG_ON and receiving the interrupt.
To solve this, we can add an API to set the power_state earlier
and call that before we start Jack Detect.
This does not cause issues, since we know inside our driver that
we are already initialized, and ready to handle the unsolicited
events.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v5.15+
Link: https://lore.kernel.org/r/20211128115558.71683-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell's requirement to have headset mic as phantom jack on this
specific dolphin hardware platform.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210916095646.7631-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is not necessary to initialize the codec during both probe and inside
the init fixup.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210827110252.5361-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Type Detection should only be run after init and when the controls have been
built. There is no need to run it multiple times.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210827110252.5361-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of the register values set for type detection cause pops during suspend,
ensure these are cleaned up after type detection completes, as well
ensuring that these are cleared when we suspend.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Codec is muted on init, and then unmuted when the stream starts.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-28-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since delays when starting jack detection after initialization
have been reduced/removed, it is necessary to add back in an extra
20ms delay after the init sequence to allow the CS42L42 to power up
correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-26-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS42L42 is configured to use a fixed sample rate of 48kHz.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-24-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs.
Codec 1 supports Headphone and Headset Mic.
Codec 2 supports Line Out.
Features:
- Front and Read Jacks appear as separate jacks; Removal or connection
of on jack should not affect the connection of the other.
- Front Jack only shows up on jack detection.
- Rear Jack is Phantom Jack.
- Separate Volume Controls for each Jack
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-22-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some hardware configurations do not support jack type detection.
Instead, for those configurations, only tip detection is supported.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-21-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To accommodate move, cs42l42_resume has been added to mirror
the existing function cs42l42_suspend.
Function cs42l42_reset is no longer required, since cs42l42_resume
and cs42l42_suspend perform the same operations.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-19-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows mutex locks to be moved into i2c functions, as
the bulk read/write functions can lock/unlock themselves to
prevent interruption of sequence reads/writes.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-17-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only disable I2C clock 25 ms after not being used.
The current implementation enables and disables the I2C clock for each
I2C transaction. Each enable/disable call requires two verb transactions.
This means each I2C transaction requires a total of four verb transactions
to enable and disable the clock.
However, if there are multiple consecutive I2C transactions, it is not
necessary to enable and disable the clock each time, instead it is more
efficient to enable the clock for the first transaction, and disable it
after the final transaction, which would improve performance.
This is achieved by using a timeout which disables the clock if no request
to enable the clock has occurred for 25 ms.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use amp offsets as indexes for saved volumes.
Remove dependencies on NID inside volume control functions.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The subsequence suspend and remuse have their enable/disable
unsolicited responses at the correct place already
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable HSBIAS_SENSE_EN for Cyborg during jack detect to reduce
pops and clicks.
Do not enable this for Warlock/Bullseye, as it causes ESD issues.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
