IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmHoS14ACgkQMUZtbf5S
IrtMQA/6AxhWuj2JsoNhvTzBCi4vkeo53rKU941bxOaST9Ow8dqDc7yAT8YeJU2B
lGw6/pXx+Fm9twGsRkkQ0vX7piIk25vKzEwnlCYVVXLAnE+lPu9qFH49X1HO5Fwy
K+frGDC524MrbJFb+UbZfJG4UitsyHoqc58Mp7ZNBe2gn12DcHotsiSJikzdd02F
rzQZhvwRKsDS2prcIHdvVAxva380cn99mvaFqIPR9MemhWKOzVa3NfkiC3tSlhW/
OphG3UuOfKCVdofYAO5/oXlVQcDKx0OD9Sr2q8aO0mlME0p0ounKz+LDcwkofaYQ
pGeMY2pEAHujLyRewunrfaPv8/SIB/ulSPcyreoF28TTN20M+4onvgTHvVSyzLl7
MA4kYH7tkPgOfbW8T573OFPdrqsy4WTrFPFovGqvDuiE8h65Pll/gTcAqsWjF/xw
CmfmtICcsBwVGMLUzpUjKAWuB0/voa/sQUuQoxvQFsgCteuslm1suLY5EfSIhdu8
nvhySJjPXRHicZQNflIwKTiOYYWls7yYVGe76u9hqjyD36peJXYjUjyyENIfLiFA
0XclGIfSBMGWMGmxvGYIZDwGOKK0j+s0PipliXVjP2otLrPYUjma5Co37KW8SiSV
9TT673FAXJNB0IJ7xiT7nRUZ/fjRrweP1glte/6d148J1Lf9MTQ=
=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
As the sched:sched_switch tracepoint args are derived from the kernel,
we'd better make it same with the kernel. So the macro TASK_COMM_LEN is
converted to type enum, then all the BPF programs can get it through
BTF.
The BPF program which wants to use TASK_COMM_LEN should include the
header vmlinux.h. Regarding the test_stacktrace_map and
test_tracepoint, as the type defined in linux/bpf.h are also defined in
vmlinux.h, so we don't need to include linux/bpf.h again.
Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add two tests, one which asserts that ring buffer memory can be passed to
other helpers for populating its entry area, and another one where verifier
rejects different type of memory passed to bpf_ringbuf_submit().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add a check to the xdp_link selftest that the kernel rejects replacing an
XDP program with a different program type on link update.
v2:
- Split this out into its own patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220107221115.326171-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The second parameter of bpf_d_path() can only accept writable
memories. Rdonly_mem obtained from bpf_per_cpu_ptr() can not
be passed into bpf_d_path for modification. This patch adds
a selftest to verify this behavior.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220106205525.2116218-1-haoluo@google.com
PT_REGS*() macro on some architectures force-cast struct pt_regs to
other types (user_pt_regs, etc) and might drop volatile modifiers, if any.
Volatile isn't really required as pt_regs value isn't supposed to change
during the BPF program run, so this is correct behavior.
But progs/loop3.c relies on that volatile modifier to ensure that loop
is preserved. Fix loop3.c by declaring i and sum variables as volatile
instead. It preserves the loop and makes the test pass on all
architectures (including s390x which is currently broken).
Fixes: 3cc31d794097 ("libbpf: Normalize PT_REGS_xxx() macro definitions")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220106205156.955373-1-andrii@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the spin lock logic and update the selftests to use sleepable
programs to use a mix of sleepable and non-sleepable programs. It's more
useful to test the sleepable programs since the tests don't really need
spinlocks.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211224152916.1550677-3-kpsingh@kernel.org
This test verifies that a ksym of non-struct can not be directly
updated.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adding tests for get_func_[arg|ret|arg_cnt] helpers.
Using these helpers in fentry/fexit/fmod_ret programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org
Four test cases are added:
(1) ensure the return value is expected
(2) ensure no const string size is rejected
(3) ensure writable target is rejected
(4) ensure no null-terminated target is rejected
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that validates that per-program and per-object log_buf
overrides work as expected. Also test same logic for low-level
bpf_prog_load() and bpf_btf_load() APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211209193840.1248570-11-andrii@kernel.org
The commit 087cba799ced ("selftests/bpf: Add weak/typeless ksym test for light skeleton")
added test_ksyms_weak to light skeleton testing, but remove CO-RE access.
Revert that part of commit, since light skeleton can use CO-RE in the kernel.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-17-alexei.starovoitov@gmail.com
Add a test where randmap() function is appended to three different bpf
programs. That action checks struct bpf_core_relo replication logic
and offset adjustment in gen loader part of libbpf.
Fourth bpf program has 360 CO-RE relocations from vmlinux, bpf_testmod,
and non-existing type. It tests candidate cache logic.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-16-alexei.starovoitov@gmail.com
Add benchmark to measure the throughput and latency of the bpf_loop
call.
Testing this on my dev machine on 1 thread, the data is as follows:
nr_loops: 10
bpf_loop - throughput: 198.519 ± 0.155 M ops/s, latency: 5.037 ns/op
nr_loops: 100
bpf_loop - throughput: 247.448 ± 0.305 M ops/s, latency: 4.041 ns/op
nr_loops: 500
bpf_loop - throughput: 260.839 ± 0.380 M ops/s, latency: 3.834 ns/op
nr_loops: 1000
bpf_loop - throughput: 262.806 ± 0.629 M ops/s, latency: 3.805 ns/op
nr_loops: 5000
bpf_loop - throughput: 264.211 ± 1.508 M ops/s, latency: 3.785 ns/op
nr_loops: 10000
bpf_loop - throughput: 265.366 ± 3.054 M ops/s, latency: 3.768 ns/op
nr_loops: 50000
bpf_loop - throughput: 235.986 ± 20.205 M ops/s, latency: 4.238 ns/op
nr_loops: 100000
bpf_loop - throughput: 264.482 ± 0.279 M ops/s, latency: 3.781 ns/op
nr_loops: 500000
bpf_loop - throughput: 309.773 ± 87.713 M ops/s, latency: 3.228 ns/op
nr_loops: 1000000
bpf_loop - throughput: 262.818 ± 4.143 M ops/s, latency: 3.805 ns/op
>From this data, we can see that the latency per loop decreases as the
number of loops increases. On this particular machine, each loop had an
overhead of about ~4 ns, and we were able to run ~250 million loops
per second.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-5-joannekoong@fb.com
This patch tests bpf_loop in pyperf and strobemeta, and measures the
verifier performance of replacing the traditional for loop
with bpf_loop.
The results are as follows:
~strobemeta~
Baseline
verification time 6808200 usec
stack depth 496
processed 554252 insns (limit 1000000) max_states_per_insn 16
total_states 15878 peak_states 13489 mark_read 3110
#192 verif_scale_strobemeta:OK (unrolled loop)
Using bpf_loop
verification time 31589 usec
stack depth 96+400
processed 1513 insns (limit 1000000) max_states_per_insn 2
total_states 106 peak_states 106 mark_read 60
#193 verif_scale_strobemeta_bpf_loop:OK
~pyperf600~
Baseline
verification time 29702486 usec
stack depth 368
processed 626838 insns (limit 1000000) max_states_per_insn 7
total_states 30368 peak_states 30279 mark_read 748
#182 verif_scale_pyperf600:OK (unrolled loop)
Using bpf_loop
verification time 148488 usec
stack depth 320+40
processed 10518 insns (limit 1000000) max_states_per_insn 10
total_states 705 peak_states 517 mark_read 38
#183 verif_scale_pyperf600_bpf_loop:OK
Using the bpf_loop helper led to approximately a 99% decrease
in the verification time and in the number of instructions.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211130030622.4131246-4-joannekoong@fb.com
In BSD and abstract address cases, we store sockets in the hash table with
keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket
varies depending on its address type; sockets with BSD addresses always
have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash.
This is just for the UNIX_ABSTRACT() macro used to check the address type.
The difference of the saved hashes comes from the first byte of the address
in the first place. So, we can test it directly.
Then we can keep a real hash in each socket and replace unix_table_lock
with per-hash locks in the later patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest that combines two BPF programs within single BPF object
file such that one of the programs is using global variables, but can be
skipped at runtime on old kernels that don't support global data.
Another BPF program is written with the goal to be runnable on very old
kernels and only relies on explicitly accessed BPF maps.
Such test, run against old kernels (e.g., libbpf CI will run it against 4.9
kernel that doesn't support global data), allows to test the approach
and ensure that libbpf doesn't make unnecessary assumption about
necessary kernel features.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211123200105.387855-2-andrii@kernel.org
The commit 1295e2cf3065 ("inet: minor optimization for backlog setting in
listen(2)") added change so that sk_max_ack_backlog is initialised earlier
in inet_dccp_listen() and inet_listen(). Since then, we no longer use
backlog in inet_csk_listen_start(), so let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add benchmark to measure overhead of uprobes and uretprobes. Also have
a baseline (no uprobe attached) benchmark.
On my dev machine, baseline benchmark can trigger 130M user_target()
invocations. When uprobe is attached, this falls to just 700K. With
uretprobe, we get down to 520K:
$ sudo ./bench trig-uprobe-base -a
Summary: hits 131.289 ± 2.872M/s
# UPROBE
$ sudo ./bench -a trig-uprobe-without-nop
Summary: hits 0.729 ± 0.007M/s
$ sudo ./bench -a trig-uprobe-with-nop
Summary: hits 1.798 ± 0.017M/s
# URETPROBE
$ sudo ./bench -a trig-uretprobe-without-nop
Summary: hits 0.508 ± 0.012M/s
$ sudo ./bench -a trig-uretprobe-with-nop
Summary: hits 0.883 ± 0.008M/s
So there is almost 2.5x performance difference between probing nop vs
non-nop instruction for entry uprobe. And 1.7x difference for uretprobe.
This means that non-nop uprobe overhead is around 1.4 microseconds for uprobe
and 2 microseconds for non-nop uretprobe.
For nop variants, uprobe and uretprobe overhead is down to 0.556 and
1.13 microseconds, respectively.
For comparison, just doing a very low-overhead syscall (with no BPF
programs attached anywhere) gives:
$ sudo ./bench trig-base -a
Summary: hits 4.830 ± 0.036M/s
So uprobes are about 2.67x slower than pure context switch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211116013041.4072571-1-andrii@kernel.org
This patch adds tests that bpf_ktime_get_coarse_ns(), bpf_timer_* and
bpf_spin_lock()/bpf_spin_unlock() helpers are forbidden in tracing progs
as their use there may result in various locking issues.
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211113142227.566439-3-me@ubique.spb.ru
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following is the main btf_type_tag usage in the
C test:
#define __tag1 __attribute__((btf_type_tag("tag1")))
#define __tag2 __attribute__((btf_type_tag("tag2")))
struct btf_type_tag_test {
int __tag1 * __tag1 __tag2 *p;
} g;
The bpftool raw dump with related types:
[4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[11] STRUCT 'btf_type_tag_test' size=8 vlen=1
'p' type_id=14 bits_offset=0
[12] TYPE_TAG 'tag1' type_id=16
[13] TYPE_TAG 'tag2' type_id=12
[14] PTR '(anon)' type_id=13
[15] TYPE_TAG 'tag1' type_id=4
[16] PTR '(anon)' type_id=15
[17] VAR 'g' type_id=11, linkage=global
With format C dump, we have
struct btf_type_tag_test {
int __attribute__((btf_type_tag("tag1"))) * __attribute__((btf_type_tag("tag1"))) __attribute__((btf_type_tag("tag2"))) *p;
};
The result C code is identical to the original definition except macro's are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012646.1508231-1-yhs@fb.com
Rename progs/tag.c to progs/btf_decl_tag.c so we can introduce
progs/btf_type_tag.c in the next patch.
Also create a subtest for btf_decl_tag in prog_tests/btf_tag.c
so we can introduce btf_type_tag subtest in the next patch.
I also took opportunity to remove the check whether __has_attribute
is defined or not in progs/btf_decl_tag.c since all recent
clangs should already support this macro.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012641.1507144-1-yhs@fb.com
A new field was added to the bpf_sk_lookup data that users can access.
Add tests that validate that the new ingress_ifindex field contains the
right data.
Signed-off-by: Mark Pashmfouroush <markpash@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211110111016.5670-3-markpash@cloudflare.com
Exception handling is triggered in BPF tracing programs when a NULL pointer
is dereferenced; the exception handler zeroes the target register and
execution of the BPF program progresses.
To test exception handling then, we need to trigger a NULL pointer dereference
for a field which should never be zero; if it is, the only explanation is the
exception handler ran. task->task_works is the NULL pointer chosen (for a new
task from fork() no work is associated), and the task_works->func field should
not be zero if task_works is non-NULL. The test verifies that task_works and
task_works->func are 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1636131046-5982-3-git-send-email-alan.maguire@oracle.com
Add tests for bpf_find_vma in perf_event program and kprobe program. The
perf_event program is triggered from NMI context, so the second call of
bpf_find_vma() will return -EBUSY (irq_work busy). The kprobe program,
on the other hand, does not have this constraint.
Also add tests for illegal writes to task or vma from the callback
function. The verifier should reject both cases.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211105232330.1936330-3-songliubraving@fb.com
-Dbpf_prog_load_deprecated=bpf_prog_test_load trick is both ugly and
breaks when deprecation goes into effect due to macro magic. Convert all
the uses to explicit bpf_prog_test_load() calls which avoid deprecation
errors and makes everything less magical.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-12-andrii@kernel.org
Fix few more SEC() definitions that were previously missed.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-9-andrii@kernel.org
This patch adds a test to trigger the DCE to remove
the whole subprog to ensure the verifier does not
depend on a stable subprog index. The DCE is done
by testing a global const.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211106014020.651638-1-kafai@fb.com
./test_progs-no_alu32 -vv -t twfw
Before the 64-bit_into_32-bit fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0xff),s32_max_value=255,u32_max_value=255)
and eventually:
invalid access to map value, value_size=8 off=7 size=8
R6 max value is outside of the allowed memory range
libbpf: failed to load object 'no_alu32/twfw.o'
After the fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0x3f))
verif_twfw:OK
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-3-alexei.starovoitov@gmail.com
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.
Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.
Fixes: 0133c20480b1 ("selftests/bpf: Fix strobemeta selftest regression")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
Running a BPF_PROG_TYPE_STRUCT_OPS prog for dummy_st_ops::test_N()
through bpf_prog_test_run(). Four test cases are added:
(1) attach dummy_st_ops should fail
(2) function return value of bpf_dummy_ops::test_1() is expected
(3) pointer argument of bpf_dummy_ops::test_1() works as expected
(4) multiple arguments passed to bpf_dummy_ops::test_2() are correct
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211025064025.2567443-5-houtao1@huawei.com
Also, avoid using CO-RE features, as lskel doesn't support CO-RE, yet.
Include both light and libbpf skeleton in same file to test both of them
together.
In c48e51c8b07a ("bpf: selftests: Add selftests for module kfunc support"),
I added support for generating both lskel and libbpf skel for a BPF
object, however the name parameter for bpftool caused collisions when
included in same file together. This meant that every test needed a
separate file for a libbpf/light skeleton separation instead of
subtests.
Change that by appending a "_lskel" suffix to the name for files using
light skeleton, and convert all existing users.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-7-memxor@gmail.com
This patch adds benchmark tests for the throughput (for lookups + updates)
and the false positive rate of bloom filter lookups, as well as some
minor refactoring of the bash script for running the benchmarks.
These benchmarks show that as the number of hash functions increases,
the throughput and the false positive rate of the bloom filter decreases.
>From the benchmark data, the approximate average false-positive rates
are roughly as follows:
1 hash function = ~30%
2 hash functions = ~15%
3 hash functions = ~5%
4 hash functions = ~2.5%
5 hash functions = ~1%
6 hash functions = ~0.5%
7 hash functions = ~0.35%
8 hash functions = ~0.15%
9 hash functions = ~0.1%
10 hash functions = ~0%
For reference data, the benchmarks run on one thread on a machine
with one numa node for 1 to 5 hash functions for 8-byte and 64-byte
values are as follows:
1 hash function:
50k entries
8-byte value
Lookups - 51.1 M/s operations
Updates - 33.6 M/s operations
False positive rate: 24.15%
64-byte value
Lookups - 15.7 M/s operations
Updates - 15.1 M/s operations
False positive rate: 24.2%
100k entries
8-byte value
Lookups - 51.0 M/s operations
Updates - 33.4 M/s operations
False positive rate: 24.04%
64-byte value
Lookups - 15.6 M/s operations
Updates - 14.6 M/s operations
False positive rate: 24.06%
500k entries
8-byte value
Lookups - 50.5 M/s operations
Updates - 33.1 M/s operations
False positive rate: 27.45%
64-byte value
Lookups - 15.6 M/s operations
Updates - 14.2 M/s operations
False positive rate: 27.42%
1 mil entries
8-byte value
Lookups - 49.7 M/s operations
Updates - 32.9 M/s operations
False positive rate: 27.45%
64-byte value
Lookups - 15.4 M/s operations
Updates - 13.7 M/s operations
False positive rate: 27.58%
2.5 mil entries
8-byte value
Lookups - 47.2 M/s operations
Updates - 31.8 M/s operations
False positive rate: 30.94%
64-byte value
Lookups - 15.3 M/s operations
Updates - 13.2 M/s operations
False positive rate: 30.95%
5 mil entries
8-byte value
Lookups - 41.1 M/s operations
Updates - 28.1 M/s operations
False positive rate: 31.01%
64-byte value
Lookups - 13.3 M/s operations
Updates - 11.4 M/s operations
False positive rate: 30.98%
2 hash functions:
50k entries
8-byte value
Lookups - 34.1 M/s operations
Updates - 20.1 M/s operations
False positive rate: 9.13%
64-byte value
Lookups - 8.4 M/s operations
Updates - 7.9 M/s operations
False positive rate: 9.21%
100k entries
8-byte value
Lookups - 33.7 M/s operations
Updates - 18.9 M/s operations
False positive rate: 9.13%
64-byte value
Lookups - 8.4 M/s operations
Updates - 7.7 M/s operations
False positive rate: 9.19%
500k entries
8-byte value
Lookups - 32.7 M/s operations
Updates - 18.1 M/s operations
False positive rate: 12.61%
64-byte value
Lookups - 8.4 M/s operations
Updates - 7.5 M/s operations
False positive rate: 12.61%
1 mil entries
8-byte value
Lookups - 30.6 M/s operations
Updates - 18.9 M/s operations
False positive rate: 12.54%
64-byte value
Lookups - 8.0 M/s operations
Updates - 7.0 M/s operations
False positive rate: 12.52%
2.5 mil entries
8-byte value
Lookups - 25.3 M/s operations
Updates - 16.7 M/s operations
False positive rate: 16.77%
64-byte value
Lookups - 7.9 M/s operations
Updates - 6.5 M/s operations
False positive rate: 16.88%
5 mil entries
8-byte value
Lookups - 20.8 M/s operations
Updates - 14.7 M/s operations
False positive rate: 16.78%
64-byte value
Lookups - 7.0 M/s operations
Updates - 6.0 M/s operations
False positive rate: 16.78%
3 hash functions:
50k entries
8-byte value
Lookups - 25.1 M/s operations
Updates - 14.6 M/s operations
False positive rate: 7.65%
64-byte value
Lookups - 5.8 M/s operations
Updates - 5.5 M/s operations
False positive rate: 7.58%
100k entries
8-byte value
Lookups - 24.7 M/s operations
Updates - 14.1 M/s operations
False positive rate: 7.71%
64-byte value
Lookups - 5.8 M/s operations
Updates - 5.3 M/s operations
False positive rate: 7.62%
500k entries
8-byte value
Lookups - 22.9 M/s operations
Updates - 13.9 M/s operations
False positive rate: 2.62%
64-byte value
Lookups - 5.6 M/s operations
Updates - 4.8 M/s operations
False positive rate: 2.7%
1 mil entries
8-byte value
Lookups - 19.8 M/s operations
Updates - 12.6 M/s operations
False positive rate: 2.60%
64-byte value
Lookups - 5.3 M/s operations
Updates - 4.4 M/s operations
False positive rate: 2.69%
2.5 mil entries
8-byte value
Lookups - 16.2 M/s operations
Updates - 10.7 M/s operations
False positive rate: 4.49%
64-byte value
Lookups - 4.9 M/s operations
Updates - 4.1 M/s operations
False positive rate: 4.41%
5 mil entries
8-byte value
Lookups - 18.8 M/s operations
Updates - 9.2 M/s operations
False positive rate: 4.45%
64-byte value
Lookups - 5.2 M/s operations
Updates - 3.9 M/s operations
False positive rate: 4.54%
4 hash functions:
50k entries
8-byte value
Lookups - 19.7 M/s operations
Updates - 11.1 M/s operations
False positive rate: 1.01%
64-byte value
Lookups - 4.4 M/s operations
Updates - 4.0 M/s operations
False positive rate: 1.00%
100k entries
8-byte value
Lookups - 19.5 M/s operations
Updates - 10.9 M/s operations
False positive rate: 1.00%
64-byte value
Lookups - 4.3 M/s operations
Updates - 3.9 M/s operations
False positive rate: 0.97%
500k entries
8-byte value
Lookups - 18.2 M/s operations
Updates - 10.6 M/s operations
False positive rate: 2.05%
64-byte value
Lookups - 4.3 M/s operations
Updates - 3.7 M/s operations
False positive rate: 2.05%
1 mil entries
8-byte value
Lookups - 15.5 M/s operations
Updates - 9.6 M/s operations
False positive rate: 1.99%
64-byte value
Lookups - 4.0 M/s operations
Updates - 3.4 M/s operations
False positive rate: 1.99%
2.5 mil entries
8-byte value
Lookups - 13.8 M/s operations
Updates - 7.7 M/s operations
False positive rate: 3.91%
64-byte value
Lookups - 3.7 M/s operations
Updates - 3.6 M/s operations
False positive rate: 3.78%
5 mil entries
8-byte value
Lookups - 13.0 M/s operations
Updates - 6.9 M/s operations
False positive rate: 3.93%
64-byte value
Lookups - 3.5 M/s operations
Updates - 3.7 M/s operations
False positive rate: 3.39%
5 hash functions:
50k entries
8-byte value
Lookups - 16.4 M/s operations
Updates - 9.1 M/s operations
False positive rate: 0.78%
64-byte value
Lookups - 3.5 M/s operations
Updates - 3.2 M/s operations
False positive rate: 0.77%
100k entries
8-byte value
Lookups - 16.3 M/s operations
Updates - 9.0 M/s operations
False positive rate: 0.79%
64-byte value
Lookups - 3.5 M/s operations
Updates - 3.2 M/s operations
False positive rate: 0.78%
500k entries
8-byte value
Lookups - 15.1 M/s operations
Updates - 8.8 M/s operations
False positive rate: 1.82%
64-byte value
Lookups - 3.4 M/s operations
Updates - 3.0 M/s operations
False positive rate: 1.78%
1 mil entries
8-byte value
Lookups - 13.2 M/s operations
Updates - 7.8 M/s operations
False positive rate: 1.81%
64-byte value
Lookups - 3.2 M/s operations
Updates - 2.8 M/s operations
False positive rate: 1.80%
2.5 mil entries
8-byte value
Lookups - 10.5 M/s operations
Updates - 5.9 M/s operations
False positive rate: 0.29%
64-byte value
Lookups - 3.2 M/s operations
Updates - 2.4 M/s operations
False positive rate: 0.28%
5 mil entries
8-byte value
Lookups - 9.6 M/s operations
Updates - 5.7 M/s operations
False positive rate: 0.30%
64-byte value
Lookups - 3.2 M/s operations
Updates - 2.7 M/s operations
False positive rate: 0.30%
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-5-joannekoong@fb.com
This patch adds test cases for bpf bloom filter maps. They include tests
checking against invalid operations by userspace, tests for using the
bloom filter map as an inner map, and a bpf program that queries the
bloom filter map for values added by a userspace program.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-4-joannekoong@fb.com
This is the same as commit d164dd9a5c08 ("selftests/bpf: Fix
test_core_autosize on big-endian machines"), but for
test_core_reloc_mods.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-7-iii@linux.ibm.com
Recent change to use tp/syscalls/sys_enter_nanosleep for perf_buffer
selftests causes this selftest to fail on 4.9 kernel in libbpf CI ([0]):
libbpf: prog 'handle_sys_enter': failed to attach to perf_event FD 6: Invalid argument
libbpf: prog 'handle_sys_enter': failed to attach to tracepoint 'syscalls/sys_enter_nanosleep': Invalid argument
It's not exactly clear why, because perf_event itself is created for
this tracepoint, but I can't even compile 4.9 kernel locally, so it's
hard to figure this out. If anyone has better luck and would like to
help investigating this, I'd really appreciate this.
For now, unblock CI by switching back to raw_syscalls/sys_enter, but reduce
amount of unnecessary samples emitted by filter by process ID. Use
explicit ARRAY map for that to make it work on 4.9 as well, because
global data isn't yet supported there.
Fixes: aa274f98b269 ("selftests/bpf: Fix possible/online index mismatch in perf_buffer test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022201342.3490692-1-andrii@kernel.org
