IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Mark tripped over the creative irqflags handling in the IO-APIC timer
delivery check which ends up doing:
local_irq_save(flags);
local_irq_enable();
local_irq_restore(flags);
which triggered a new consistency check he's working on required for
replacing the POPF based restore with a conditional STI.
That code is a historical mess and none of this is needed. Make it
straightforward use local_irq_disable()/enable() as that's all what is
required. It is invoked from interrupt enabled code nowadays.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/87k0tpju47.fsf@nanos.tec.linutronix.de
The AMD IOMMU has two modes for generating its own interrupts.
The first is very much based on PCI MSI, and can be configured by Linux
precisely that way. But like legacy unmapped PCI MSI it's limited to
8 bits of APIC ID.
The second method does not use PCI MSI at all in hardawre, and instead
configures the INTCAPXT registers in the IOMMU directly with the APIC ID
and vector.
In the latter case, the IOMMU driver would still use pci_enable_msi(),
read back (through MMIO) the MSI message that Linux wrote to the PCI MSI
table, then swizzle those bits into the appropriate register.
Historically, this worked because__irq_compose_msi_msg() would silently
generate an invalid MSI message with the high bits of the APIC ID in the
high bits of the MSI address. That hack was intended only for the Intel
IOMMU, and I recently enforced that, introducing a warning in
__irq_msi_compose_msg() if it was invoked with an APIC ID above 255.
Fix the AMD IOMMU not to depend on that hack any more, by having its own
irqdomain and directly putting the bits from the irq_cfg into the right
place in its ->activate() method.
Fixes: 47bea873cf80 "x86/msi: Only use high bits of MSI address for DMAR unit")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/05e3a5ba317f5ff48d2f8356f19e617f8b9d23a4.camel@infradead.org
PCI's default trigger type is level and ISA's is edge. The recent
refactoring made it the other way round, which went unnoticed as it seems
only to cause havoc on some AMD systems.
Make the comment and code do the right thing again.
Fixes: a27dca645d2c ("x86/io_apic: Cleanup trigger/polarity helpers")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/87d00lgu13.fsf@nanos.tec.linutronix.de
In commit b643128b917 ("x86/ioapic: Use irq_find_matching_fwspec() to
find remapping irqdomain") the I/O-APIC code was changed to find its
parent irqdomain using irq_find_matching_fwspec(), but the key used
for the lookup was wrong. It shouldn't use 'ioapic' which is the index
into its own ioapics[] array. It should use the actual arbitration
ID of the I/O-APIC in question, which is mpc_ioapic_id(ioapic).
Fixes: b643128b917 ("x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain")
Reported-by: lkp <oliver.sang@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/57adf2c305cd0c5e9d860b2f3007a7e676fd0f9f.camel@infradead.org
When a Linux VM runs on Hyper-V, if the VM has CPUs with >255 APIC IDs,
the CPUs can't be the destination of IOAPIC interrupts, because the
IOAPIC RTE's Dest Field has only 8 bits. Currently the hackery driver
drivers/iommu/hyperv-iommu.c is used to ensure IOAPIC interrupts are
only routed to CPUs that don't have >255 APIC IDs. However, there is
an issue with kdump, because the kdump kernel can run on any CPU, and
hence IOAPIC interrupts can't work if the kdump kernel run on a CPU
with a >255 APIC ID.
The kdump issue can be fixed by the Extended Dest ID, which is introduced
recently by David Woodhouse (for IOAPIC, see the field virt_destid_8_14 in
struct IO_APIC_route_entry). Of course, the Extended Dest ID needs the
support of the underlying hypervisor. The latest Hyper-V has added the
support recently: with this commit, on such a Hyper-V host, Linux VM
does not use hyperv-iommu.c because hyperv_prepare_irq_remapping()
returns -ENODEV; instead, Linux kernel's generic support of Extended Dest
ID from David is used, meaning that Linux VM is able to support up to
32K CPUs, and IOAPIC interrupts can be routed to all the CPUs.
On an old Hyper-V host that doesn't support the Extended Dest ID, nothing
changes with this commit: Linux VM is still able to bring up the CPUs with
> 255 APIC IDs with the help of hyperv-iommu.c, but IOAPIC interrupts still
can not go to such CPUs, and the kdump kernel still can not work properly
on such CPUs.
[ tglx: Updated comment as suggested by David ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201103011136.59108-1-decui@microsoft.com
Some hypervisors can allow the guest to use the Extended Destination ID
field in the MSI address to address up to 32768 CPUs.
This applies to all downstream devices which generate MSI cycles,
including HPET, I/O-APIC and PCI MSI.
HPET and PCI MSI use the same __irq_msi_compose_msg() function, while
I/O-APIC generates its own and had support for the extended bits added in
a previous commit.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-33-dwmw2@infradead.org
Bits 63-48 of the I/OAPIC Redirection Table Entry map directly to bits 19-4
of the address used in the resulting MSI cycle.
Historically, the x86 MSI format only used the top 8 of those 16 bits as
the destination APIC ID, and the "Extended Destination ID" in the lower 8
bits was unused.
With interrupt remapping, the lowest bit of the Extended Destination ID
(bit 48 of RTE, bit 4 of MSI address) is now used to indicate a remappable
format MSI.
A hypervisor can use the other 7 bits of the Extended Destination ID to
permit guests to address up to 15 bits of APIC IDs, thus allowing 32768
vCPUs before having to expose a vIOMMU and interrupt remapping to the
guest.
No behavioural change in this patch, since nothing yet permits APIC IDs
above 255 to be used with the non-IR I/OAPIC domain.
[ tglx: Converted it to the cleaned up entry/msi_msg format and added
commentry ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-32-dwmw2@infradead.org
The I/O-APIC generates an MSI cycle with address/data bits taken from its
Redirection Table Entry in some combination which used to make sense, but
now is just a bunch of bits which get passed through in some seemingly
arbitrary order.
Instead of making IRQ remapping drivers directly frob the I/OA-PIC RTE, let
them just do their job and generate an MSI message. The bit swizzling to
turn that MSI message into the I/O-APIC's RTE is the same in all cases,
since it's a function of the I/O-APIC hardware. The IRQ remappers have no
real need to get involved with that.
The only slight caveat is that the I/OAPIC is interpreting some of those
fields too, and it does want the 'vector' field to be unique to make EOI
work. The AMD IOMMU happens to put its IRTE index in the bits that the
I/O-APIC thinks are the vector field, and accommodates this requirement by
reserving the first 32 indices for the I/O-APIC. The Intel IOMMU doesn't
actually use the bits that the I/O-APIC thinks are the vector field, so it
fills in the 'pin' value there instead.
[ tglx: Replaced the unreadably macro maze with the cleaned up RTE/msi_msg
bitfields and added commentry to explain the mapping magic ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-22-dwmw2@infradead.org
Having two seperate structs for the I/O-APIC RTE entries (non-remapped and
DMAR remapped) requires type casts and makes it hard to map.
Combine them in IO_APIC_routing_entry by defining a union of two 64bit
bitfields. Use naming which reflects which bits are shared and which bits
are actually different for the operating modes.
[dwmw2: Fix it up and finish the job, pulling the 32-bit w1,w2 words for
register access into the same union and eliminating a few more
places where bits were accessed through masks and shifts.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-21-dwmw2@infradead.org
'trigger' and 'polarity' are used throughout the I/O-APIC code for handling
the trigger type (edge/level) and the active low/high configuration. While
there are defines for initializing these variables and struct members, they
are not used consequently and the meaning of 'trigger' and 'polarity' is
opaque and confusing at best.
Rename them to 'is_level' and 'active_low' and make them boolean in various
structs so it's entirely clear what the meaning is.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-20-dwmw2@infradead.org
Use the msi_msg shadow structs and compose the message with named bitfields
instead of the unreadable macro maze.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-18-dwmw2@infradead.org
Use the bitfields in the x86 shadow structs instead of decomposing the
32bit value with macros.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-17-dwmw2@infradead.org
Create shadow structs with named bitfields for msi_msg data, address_lo and
address_hi and use them in the MSI message composer.
Provide a function to retrieve the destination ID. This could be inline,
but that'd create a circular header dependency.
[dwmw2: fix bitfields not all to be a union]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-13-dwmw2@infradead.org
This isn't really dependent on PCI MSI; it's just generic MSI which is now
supported by the generic x86_vector_domain. Move the HPET MSI support back
into hpet.c with the rest of the HPET support.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-11-dwmw2@infradead.org
This shouldn't be dependent on PCI_MSI. HPET and I/O-APIC can deliver
interrupts through MSI without having any PCI in the system at all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-10-dwmw2@infradead.org
apic::irq_dest_mode is actually a boolean, but defined as u32 and named in
a way which does not explain what it means.
Make it a boolean and rename it to 'dest_mode_logical'
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-9-dwmw2@infradead.org
struct apic has two members which store information about the destination
mode: dest_logical and irq_dest_mode.
dest_logical contains a mask which was historically used to set the
destination mode in IPI messages. Over time the usage was reduced and the
logical/physical functions were seperated.
There are only a few places which still use 'dest_logical' but they can
use 'irq_dest_mode' instead.
irq_dest_mode is actually a boolean where 0 means physical destination mode
and 1 means logical destination mode. Of course the name does not reflect
the functionality. This will be cleaned up in a subsequent change.
Remove apic::dest_logical and fixup the remaining users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-8-dwmw2@infradead.org
All these functions are only used for logical destination mode. So reading
the destination mode mask from the apic structure is a pointless
exercise. Just hand in the proper constant: APIC_DEST_LOGICAL.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-7-dwmw2@infradead.org
The enum ioapic_irq_destination_types and the enumerated constants starting
with 'dest_' are gross misnomers because they describe the delivery mode.
Rename then enum and the constants so they actually make sense.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-6-dwmw2@infradead.org
The ioapic interrupt type table is wrong as it assumes that polarity in
IO/APIC context means active high when set. But the IO/APIC polarity is
working the other way round. This works because the ordering of the entries
is consistent with the device tree and the type information is not used by
the IO/APIC interrupt chip.
The whole trigger and polarity business of IO/APIC is misleading and the
corresponding constants which are defined as 0/1 are not used consistently
and are going to be removed.
Rename the type table members to 'is_level' and 'active_low' and adjust the
type information for consistency sake.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-5-dwmw2@infradead.org
The UV x2apic is strictly using physical destination mode, but
apic::dest_logical is initialized with APIC_DEST_LOGICAL.
This does not matter much because UV does not use any of the generic
functions which use apic::dest_logical, but is still inconsistent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-4-dwmw2@infradead.org
The Intel IOMMU has an MSI-like configuration for its interrupt, but it
isn't really MSI. So it gets to abuse the high 32 bits of the address, and
puts the high 24 bits of the extended APIC ID there.
This isn't something that can be used in the general case for real MSIs,
since external devices using the high bits of the address would be
performing writes to actual memory space above 4GiB, not targeted at the
APIC.
Factor the hack out and allow it only to be used when appropriate, adding a
WARN_ON_ONCE() if other MSIs are targeted at an unreachable APIC ID. That
should never happen since the compatibility MSI messages are not used when
Interrupt Remapping is enabled.
The x2apic_enabled() check isn't needed because Linux won't bring up CPUs
with higher APIC IDs unless IR and x2apic are enabled anyway.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-3-dwmw2@infradead.org
Currently, Linux as a hypervisor guest will enable x2apic only if there are
no CPUs present at boot time with an APIC ID above 255.
Hotplugging a CPU later with a higher APIC ID would result in a CPU which
cannot be targeted by external interrupts.
Add a filter in x2apic_apic_id_valid() which can be used to prevent such
CPUs from coming online, and allow x2apic to be enabled even if they are
present at boot time.
Fixes: ce69a784504 ("x86/apic: Enable x2APIC without interrupt remapping under KVM")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-2-dwmw2@infradead.org
No functional change; just reserve the feature bit for now so that VMMs
can start to implement it.
This will allow the host to indicate that MSI emulation supports 15-bit
destination IDs, allowing up to 32768 CPUs without interrupt remapping.
cf. https://patchwork.kernel.org/patch/11816693/ for qemu
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <4cd59bed05f4b7410d3d1ffd1e997ab53683874d.camel@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX5VVeQAKCRCAXGG7T9hj
voI0AQD3ol/EN9uHW1qKduBI/nl5tgv325Zri8CMu60kS45pgAD/ccUXRcHojs3l
YIfgcgT4qKQFWzv57Fc9FUBQJMahJgM=
=6ZgH
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
a host hang.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+T6RoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMx2gf+PjoeMjLKtstdKDdiLFV46X7YdYKz
sUoDhpSbiLpEus5BF6OauUWwKgB7GcsoDUnLgjN5jqkAQzoFm0YOcI2GlXS999SL
5QIg6Vw5WF8X/7EVt6gxzC6KcWjbQvv38R/Ktd/0sMqRBPiZG7kVcWeXlopb9DaQ
Rdgg0hNVpgDiTNrBNl5RnM7Wz/SrOZmwaotW1LcII+BkCnj9Av77v77TxN9YuvG4
o+GMMQseFAzDjQ+jHZkHuBmPRy5dQB9ywzEIrUCubqhT04sWbQ6DhGfx45a0IgsY
33iT28omYdMVlRd/i3KcHQ86JJSo5g7pOqLwGd1L9HjNTS5VmQ8HXNJWBA==
=ECL9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Two fixes for this merge window, and an unrelated bugfix for a host
hang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ioapic: break infinite recursion on lazy EOI
KVM: vmx: rename pi_init to avoid conflict with paride
KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
on 5-level paging machines, to always map boot_params and the kernel
cmdline, and disable stack protector for ../compressed/head{32,64}.c.
(Arvind Sankar)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+T8ZcACgkQEsHwGGHe
VUoaTRAAnc1LUAbf6dgsKBf84VPMbyPS2pZa4CL/5HGg+ZQOL6lK91dhT9nmsB6U
gr5u/9x4mGF5YEvYUUXB1yYEcyGBSW1JCBUFyQdAxIpBnlk2VmuKr5E3uA/ioprl
mxgvO1dCfZUXboGGb2Keo6EP3Z+FMm9o9LifdO7udeXUYAFAjB6FpUV0egXbaUSo
nT8f+OqavhD9nsChW5kFTtWTHkTbei9aTfAei54ADQPe+3KNud1i/YynzCSmoB9a
Frc9xFEgComUptsDhPR4nshuogZgH6q2tz6J3e7og+zdInUUQ1q7E6sweXWJ17sw
8o+dp1X5uwziH1tmfcS+3Z8Mpy64LLVoywM7WkcMGcqnwzoOaUWkjItbf68UQPKx
fRCO87JMCYifh3El6IgbOglXZKtdYRy5nkPDfb0NtIQdko4nc/yXLGZxoQJOSM/F
bnMokk/+etrzu9BlxTSxV7q2GS5kza1TZP0LB3q8km+zQOdYHNfYgnZtUiVqpOKl
HmlY4LSFv7FV+yr1or+XbOVfhsBqFqO8YkAC7xqtHcmo3OgLwL+0d399U+7O0Nk1
aU5zK1TmiQHQBoLNkBDcnXSZJ78ooXfup4WK7Oxk4SuiGd3vW4FG6QtoBtMY+Ads
sLEsjAHjvJJQg14AgO1LDwdmTSABHd/SoLit8+SrGbScctwkx3w=
=iVqC
-----END PGP SIGNATURE-----
Merge tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV-ES fixes from Borislav Petkov:
"Three fixes to SEV-ES to correct setting up the new early pagetable on
5-level paging machines, to always map boot_params and the kernel
cmdline, and disable stack protector for ../compressed/head{32,64}.c.
(Arvind Sankar)"
* tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Explicitly map boot_params and command line
x86/head/64: Disable stack protection for head$(BITS).o
x86/boot/64: Initialize 5-level paging variables earlier
During shutdown the IOAPIC trigger mode is reset to edge triggered
while the vfio-pci INTx is still registered with a resampler.
This allows us to get into an infinite loop:
ioapic_set_irq
-> ioapic_lazy_update_eoi
-> kvm_ioapic_update_eoi_one
-> kvm_notify_acked_irq
-> kvm_notify_acked_gsi
-> (via irq_acked fn ptr) irqfd_resampler_ack
-> kvm_set_irq
-> (via set fn ptr) kvm_set_ioapic_irq
-> kvm_ioapic_set_irq
-> ioapic_set_irq
Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to
edge-triggered interrupts", 2020-05-04) acknowledges that this recursion
loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi,
but at this point the scenario is already set, we have an edge interrupt
with resampler on the same gsi.
Fortunately, the only user of irq ack notifiers (in addition to resamplefd)
is i8254 timer interrupt reinjection. These are edge-triggered, so in
principle they would need the call to kvm_ioapic_update_eoi_one from
ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't
need the lazy EOI behavior. Therefore, remove the call to
kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi.
This fixes CVE-2020-27152. Note that this issue cannot happen with
SR-IOV assigned devices because virtual functions do not have INTx,
only MSI.
Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
allyesconfig results in:
ld: drivers/block/paride/paride.o: in function `pi_init':
(.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here
make: *** [Makefile:1164: vmlinux] Error 1
because commit:
commit 8888cdd0996c2d51cd417f9a60a282c034f3fa28
Author: Xiaoyao Li <xiaoyao.li@intel.com>
Date: Wed Sep 23 11:31:11 2020 -0700
KVM: VMX: Extract posted interrupt support to separate files
added another pi_init(), though one already existed in the paride code.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a modulo operator with the more common pattern for computing the
gfn "offset" of a huge page to fix an i386 build error.
arch/x86/kvm/mmu/tdp_mmu.c:212: undefined reference to `__umoddi3'
In fact, almost all of tdp_mmu.c can be elided on 32-bit builds, but
that is a much larger patch.
Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201024031150.9318-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Quoting https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html:
You can define a local register variable and associate it with a
specified register...
The only supported use for this feature is to specify registers for
input and output operands when calling Extended asm (see Extended
Asm). This may be necessary if the constraints for a particular
machine don't provide sufficient control to select the desired
register.
On 32-bit x86, this is used to ensure that gcc will put an 8-byte value
into the %edx:%eax pair, while all other cases will just use the single
register %eax (%rax on x86-64). While the _ASM_AX actually just expands
to "%eax", note this comment next to get_user() which does something
very similar:
* The use of _ASM_DX as the register specifier is a bit of a
* simplification, as gcc only cares about it as the starting point
* and not size: for a 64-bit value it will use %ecx:%edx on 32 bits
* (%ecx being the next register in gcc's x86 register sequence), and
* %rdx on 64 bits.
However, getting this to work requires that there is no code between the
assignment to the local register variable and its use as an input to the
asm() which can possibly clobber any of the registers involved -
including evaluation of the expressions making up other inputs.
In the current code, the ptr expression used directly as an input may
cause such code to be emitted. For example, Sean Christopherson
observed that with KASAN enabled and ptr being current->set_child_tid
(from chedule_tail()), the load of current->set_child_tid causes a call
to __asan_load8() to be emitted immediately prior to the __put_user_4
call, and Naresh Kamboju reports that various mmstress tests fail on
KASAN-enabled builds.
It's also possible to synthesize a broken case without KASAN if one uses
"foo()" as the ptr argument, with foo being some "extern u64 __user
*foo(void);" (though I don't know if that appears in real code).
Fix it by making sure ptr gets evaluated before the assignment to
__val_pu, and add a comment that __val_pu must be the last thing
computed before the asm() is entered.
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d55564cfc222 ("x86: Make __put_user() generate an out-of-line call")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
-----BEGIN PGP SIGNATURE-----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=aVWo
-----END PGP SIGNATURE-----
Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block
Pull arch task_work cleanups from Jens Axboe:
"Two cleanups that don't fit other categories:
- Finally get the task_work_add() cleanup done properly, so we don't
have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates
all callers, and also fixes up the documentation for
task_work_add().
- While working on some TIF related changes for 5.11, this
TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch
duplication for how that is handled"
* tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block:
task_work: cleanup notification modes
tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
xen_debug_interrupt() is specific to 2-level event handling. So don't
register it with fifo event handling being active.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When KVM maps a largepage backed region at a lower level in order to
make it executable (i.e. NX large page shattering), it reduces the TLB
performance of that region. In order to avoid making this degradation
permanent, KVM must periodically reclaim shattered NX largepages by
zapping them and allowing them to be rebuilt in the page fault handler.
With this patch, the TDP MMU does not respect KVM's rate limiting on
reclaim. It traverses the entire TDP structure every time. This will be
addressed in a future patch.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-21-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Direct roots don't have a write flooding count because the guest can't
affect that paging structure. Thus there's no need to clear the write
flooding count on a fast CR3 switch for direct roots.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-20-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to support MMIO, KVM must be able to walk the TDP paging
structures to find mappings for a given GFN. Support this walk for
the TDP MMU.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
v2: Thanks to Dan Carpenter and kernel test robot for finding that root
was used uninitialized in get_mmio_spte.
Signed-off-by: Ben Gardon <bgardon@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20201014182700.2888246-19-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To support nested virtualization, KVM will sometimes need to write
protect pages which are part of a shadowed paging structure or are not
writable in the shadowed paging structure. Add a function to write
protect GFN mappings for this purpose.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-18-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirty logging ultimately breaks down MMU mappings to 4k granularity.
When dirty logging is no longer needed, these granaular mappings
represent a useless performance penalty. When dirty logging is disabled,
search the paging structure for mappings that could be re-constituted
into a large page mapping. Zap those mappings so that they can be
faulted in again at a higher mapping level.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-17-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dirty logging is a key feature of the KVM MMU and must be supported by
the TDP MMU. Add support for both the write protection and PML dirty
logging modes.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-16-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
a hook and handle the change_pte MMU notifier.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-15-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. The
main Linux MM uses the access tracking MMU notifiers for swap and other
features. Add hooks to handle the test/flush HVA (range) family of
MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to interoperate correctly with the rest of KVM and other Linux
subsystems, the TDP MMU must correctly handle various MMU notifiers. Add
hooks to handle the invalidate range family of MMU notifiers.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
