IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f84 ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
The Qualcomm PCI bridge device (Device ID 0x010e) found in chipsets such as
SC8280XP used in Lenovo Thinkpad X13s, does not set the Command Completed
bit unless writes to the Slot Command register change "Control" bits.
This results in timeouts like below during boot and resume from suspend:
pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
...
pcieport 0002:00:00.0: pciehp: Timeout on hotplug command 0x13f1 (issued 107724 msec ago)
Add the device to the Command Completed quirk to mark commands "completed"
immediately unless they change the "Control" bits.
Link: https://lore.kernel.org/r/20230213144922.89982-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
Add compatible for Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.
Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On r8a7791/koelsch:
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xc3a34e00 (size 64):
comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
hex dump (first 32 bytes):
b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...]..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<fe3aa979>] __kmalloc+0xf0/0x140
[<34bd6bc0>] resource_list_create_entry+0x18/0x38
[<767046bc>] pci_add_resource_offset+0x20/0x68
[<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390
When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid. This invalidation is done by clearing the
flags, start, and end members.
When adding the initial resources to the bus later, invalid resources are
skipped. Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.
E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:
pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
pci-rcar-gen2 ee090000.pci: PCI: revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]
Fix this by only skipping resources where all of the flags, start, and end
members are zero.
Fixes: 7c3855c423b17f6c ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
As a part of the transition towards callback mechanism for signalling the
events from EPC to EPF, let's use the link_up() callback in the place of
the LINK_UP notifier. This also removes the notifier support completely
from the PCI endpoint framework.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
Instead of using the notifiers for passing the events from EPC to EPF,
let's introduce a callback based mechanism where the EPF drivers can
populate relevant callbacks for EPC events they want to subscribe.
The use of notifiers in kernel is not recommended if there is a real link
between the sender and receiver, like in this case. Also, the existing
atomic notifier forces the notification functions to be in atomic context
while the caller may be in non-atomic context. For instance, the two
in-kernel users of the notifiers, pcie-qcom and pcie-tegra194, both are
calling the notifier functions in non-atomic context (from threaded IRQ
handlers). This creates a sleeping in atomic context issue with the
existing EPF_TEST driver that calls the EPC APIs that may sleep.
For all these reasons, let's get rid of the notifier chains and use the
simple callback mechanism for signalling the events from EPC to EPF
drivers. This preserves the context of the caller and avoids the latency
of going through a separate interface for triggering the notifications.
As a first step of the transition, the core_init() callback is introduced
in this commit, that'll replace the existing CORE_INIT notifier used for
signalling the init complete event from EPC.
During the occurrence of the event, EPC will go over the list of EPF
drivers attached to it and will call the core_init() callback if available.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
The EPC controller maintains a list of EPF drivers added to it. For
protecting this list against the concurrent accesses, the epc->lock
(used for protecting epc_ops) has been used so far. Since there were
no users trying to use epc_ops and modify the pci_epf list simultaneously,
this was not an issue.
But with the addition of callback mechanism for passing the events, this
will be a problem. Because the pci_epf list needs to be iterated first
for getting hold of the EPF driver and then the relevant event specific
callback needs to be called for the driver.
If the same epc->lock is used, then it will result in a deadlock scenario.
For instance,
...
mutex_lock(&epc->lock);
list_for_each_entry(epf, &epc->pci_epf, list) {
epf->event_ops->core_init(epf);
|
|-> pci_epc_set_bar();
|
|-> mutex_lock(&epc->lock) # DEADLOCK
...
So to fix this issue, use a separate lock called "list_lock" for
protecting the pci_epf list against the concurrent accesses. This lock
will also be used by the callback mechanism.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
dw_pcie_ep_linkup() may take more time to execute depending on the EPF
driver implementation. Calling this API in the hard IRQ handler is not
encouraged since the hard IRQ handlers are supposed to complete quickly.
So move the dw_pcie_ep_linkup() call to threaded IRQ handler.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status
and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the
execution of dw_pcie_ep_linkup() depends on the EPF driver and may take
more time depending on the EPF implementation.
In general, hard IRQ handlers are supposed to return quickly and not block
for so long. Moreover, there is no real need of the current IRQ handler to
be a hard IRQ handler. So switch to the threaded IRQ handler for the
"dra7xx-pcie-main" IRQ.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
If a device has a firmware node (DT/ACPI), and the device is marked
disabled, that is currently ignored. Add a check for this condition and
bail out creating the pci_dev.
This assumes the config space for the device can still be accessed because
they already have by this point in order to identify the device.
Link: https://lore.kernel.org/r/20230210164351.2687475-1-robh@kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
-----BEGIN PGP SIGNATURE-----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=NSFX
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Move to a shared PCI git tree (Bjorn Helgaas)
- Add Krzysztof Wilczyński as another PCI maintainer (Lorenzo
Pieralisi)
- Revert a couple ASPM patches to fix suspend/resume regressions (Bjorn
Helgaas)
* tag 'pci-v6.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"
Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"
MAINTAINERS: Promote Krzysztof to PCI controller maintainer
MAINTAINERS: Move to shared PCI tree
This reverts commit 5e85eba6f50dc288c22083a7e213152bcc4b8208.
Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.
The main symptom is:
iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible
and the machine is only partially usable after resume. It can't run dmesg
and can't do a clean reboot. This happens on every suspend/resume cycle.
Revert 5e85eba6f50d until we can figure out the root cause.
Fixes: 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
This reverts commit 4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.
Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1. Tasev bisected to a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.
Mark saw the same symptoms and bisected to 4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:
pci_restore_state
pci_restore_aspm_l1ss_state
aspm_program_l1ss
pci_write_config_dword(PCI_L1SS_CTL1, ctl1) # L1SS restore
pci_restore_pcie_state
pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++]) # L1 restore
which is a problem because PCIe r6.0, sec 5.5.4, requires that:
If setting either or both of the enable bits for ASPM L1 PM
Substates, both ports must be configured as described in this
section while ASPM L1 is disabled.
Separately, Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on 4ff116d0d5fd.
Revert 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of 5e85eba6f50d
to fix the issue Thomas reported.
Note that reverting 4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume. As far as we know the system will use more power but will
still *work* correctly.
Fixes: 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
People are reporting that pci-mvebu.c driver does not work with recent
mainline kernel. There are more bugs which prevents its for daily usage.
So lets mark it as broken for now, until somebody would be able to fix it
in mainline kernel.
Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Merge the general CXL updates with fixes targeting v6.2-rc for v6.3.
Resolve a conflict with the fix and move of cxl_report_and_clear() from
pci.c to core/pci.c.
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
Previously we distributed spare resources only upon hot-add, so if the
initial root bus scan found devices that had not been fully configured by
the BIOS, we allocated only enough resources to cover what was then
present. If some of those devices were hotplug bridges, we did not leave
any additional resource space for future expansion.
Distribute the available resources for root buses, too, to make this work
the same way as the normal hotplug case.
A previous commit to do this was reverted due to a regression reported by
Jonathan Cameron:
e96e27fc6f79 ("PCI: Distribute available resources for root buses, too")
5632e2beaf9d ("Revert "PCI: Distribute available resources for root buses, too"")
This commit changes pci_bridge_resources_not_assigned() to work with
bridges that do not have all the resource windows programmed by the boot
firmware (previously we expected all I/O, memory and prefetchable memory
were programmed).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Link: https://lore.kernel.org/r/20220905080232.36087-5-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20230131092405.29121-4-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A PCI bridge may reside on a bus with other devices as well. The resource
distribution code does not take this into account and therefore it expands
the bridge resource windows too much, not leaving space for the other
devices (or functions of a multifunction device). This leads to an issue
that Jonathan reported when running QEMU with the following topology (QEMU
parameters):
-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \
-device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \
-device e1000,bus=root_port13,addr=0.1 \
-device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \
-device e1000,bus=fun1
The first e1000 NIC here is another function in the switch upstream port.
This leads to following errors:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Fix this by taking into account bridge windows, device BARs and SR-IOV PF
BARs on the bus (PF BARs include space for VF BARS so only account PF
BARs), including the ones belonging to bridges themselves if it has any.
Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/
Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsystems.com/
Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: Alexander Motin <mav@ixsystems.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After division the extra resource space per hotplug bridge may not be
aligned according to the window alignment, so align it before passing it
down for further distribution.
Link: https://lore.kernel.org/r/20230131092405.29121-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.
The delay required to detect the ports seems to be in the range [75-100]
milliseconds.
If the ports are not detected the controller is not functional.
There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.
This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.
Add the extra 100 milliseconds delay to fix the issue.
[0]: https://github.com/openwrt/openwrt/pull/11220
Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
PCIe ports reserved for VMD use are not visible to BIOS and therefore not
configured to enable PCIe ASPM or LTR values (which BIOS will configure if
they are not set). Lack of this programming results in high power
consumption on laptops as reported in bugzilla. For affected products use
pci_enable_link_state to set the allowed link states for devices on the
root ports. Also set the LTR value to the maximum value needed for the SoC.
This is a workaround for products from Rocket Lake through Alder Lake.
Raptor Lake, the latest product at this time, has already implemented LTR
configuring in BIOS. Future products will move ASPM configuration back to
BIOS as well. As this solution is intended for laptops, support is not
added for hotplug or for devices downstream of a switch on the root port.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717
Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Simplify the device ID list by creating a grouping of features shared by
client products.
Suggested-by: Jon Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use PCI_VDEVICE to simplify the device table.
Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Add pci_enable_link_state() to allow devices to change the default BIOS
configured states. Clears the BIOS default settings then sets the new
states and reconfigures the link under the semaphore. Also add
PCIE_LINK_STATE_ALL macro for convenience for callers that want to enable
all link states.
Link: https://lore.kernel.org/r/20230120031522.2304439-2-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After cc27b735ad3a ("PCI/portdrv: Turn off PCIe services during shutdown")
we observe hangs during poweroff/reboot on systems with LS7A chipset.
This happens because the portdrv .shutdown() method (pcie_portdrv_remove())
clears PCI_COMMAND_MASTER via pci_disable_device(), which prevents bridges
from forwarding memory or I/O Requests in the upstream direction (PCIe
r6.0, sec 7.5.1.1.3).
LS7A Root Ports have a hardware defect: clearing PCI_COMMAND_MASTER *also*
prevents the bridge from forwarding CPU MMIO requests in the downstream
direction, and these MMIO accesses to devices below the bridge happen even
after .shutdown(), e.g., to print console messages. LS7A neither forwards
the requests nor sends an unsuccessful completion to the CPU, so the CPU
waits forever, resulting in the hang.
The purpose of .shutdown() is to disable interrupts and DMA from the
device. PCIe ports may generate interrupts (either MSI/MSI-X or INTx) for
AER, DPC, PME, hotplug, etc., but they never perform DMA except MSI/MSI-X.
Clearing PCI_COMMAND_MASTER effectively disables MSI/MSI-X, but not INTx.
The port service driver .remove() methods clear the interrupt enables in
PCI_ERR_ROOT_COMMAND, PCI_EXP_DPC_CTL, PCI_EXP_SLTCTL, and PCI_EXP_RTCTL,
etc., which disables interrupts regardless of whether they are MSI/MSI-X or
INTx.
Add a pcie_portdrv_shutdown() method that calls all the port service driver
.remove() methods to clear the interrupt enables for each service but does
not clear Bus Mastering on the port itself.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230201043018.778499-2-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following bits in the PCIe Device Control register enable sending of
ERR_COR, ERR_NONFATAL, or ERR_FATAL Messages (or reporting internally in
the case of Root Ports):
Correctable Error Reporting Enable
Non-Fatal Error Reporting Enable
Fatal Error Reporting Enable
Unsupported Request Reporting Enable
These enable bits are set by pci_enable_pcie_error_reporting(), and since
f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), we
do that in this path during enumeration:
pci_init_capabilities
pci_aer_init
pci_enable_pcie_error_reporting
Previously, the AER service driver also traversed the hierarchy when
claiming a Root Port, enabling error reporting for downstream devices, but
this is redundant.
Remove the code that enables this error reporting in the AER .probe() path.
Also remove similar code that disables error reporting in the AER .remove()
path.
Note that these Device Control Reporting Enable bits do not control
interrupt generation. That's done by the similarly-named bits in the AER
Root Error Command register, which are still set by aer_probe() and cleared
by aer_remove(), since the AER service driver handles those interrupts.
See PCIe r6.0, sec 6.2.6.
Link: https://lore.kernel.org/r/20230118234612.272916-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.
Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().
Fixes: 8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "ret" variable in switchtec_dma_mrpc_isr() is superfluous. Remove it
and just return the value. No functional change intended.
Link: https://lore.kernel.org/r/20221216162126.207863-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
The sysfs link name "virtfn%u" constructed by pci_iov_sysfs_link() requires
17 bytes to contain the longest possible string. Increase VIRTFN_ID_LEN to
accommodate that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[bhelgaas: commit log, comment at #define]
Fixes: dd7cc44d0bce ("PCI: add SR-IOV API for Physical Function driver")
Link: https://lore.kernel.org/r/20221218033347.23743-1-gremlin@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since commit fc7a6209d571 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.
As such, change the remove function for Hyper-V VMBus based
drivers to return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
i.MX PCIe is one dual mode PCIe controller.
Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root
Complex mode and Endpoint mode.
Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Fv2v
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Work around apparent firmware issue that made Linux reject MMCONFIG
space, which broke PCI extended config space (Bjorn Helgaas)
- Fix CONFIG_PCIE_BT1 dependency due to mid-air collision between a
PCI_MSI_IRQ_DOMAIN -> PCI_MSI change and addition of PCIE_BT1 (Lukas
Bulwahn)
* tag 'pci-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space
x86/pci: Simplify is_mmconf_reserved() messages
PCI: dwc: Adjust to recent removal of PCI_MSI_IRQ_DOMAIN
It is questionable to allow a PCI bridge to go into D3 if it has _S0W
returning D2 or a shallower power state, so modify acpi_pci_bridge_d3(() to
always take the return value of _S0W for the target bridge into account.
That is, make it return 'false' if _S0W returns D2 or a shallower power
state for the target bridge regardless of its ancestor Root Port
properties. Of course, this also causes 'false' to be returned if the Root
Port itself is the target and its _S0W returns D2 or a shallower power
state.
However, still allow bridges without _S0W that are power-manageable via
ACPI to enter D3 to retain the current code behavior in that case.
This fixes problems where a hotplug notification is missed because a bridge
is in D3. That means hot-added devices such as USB4 docks (and the devices
they contain) and Thunderbolt 3 devices may not work.
Link: https://lore.kernel.org/linux-pci/20221031223356.32570-1-mario.limonciello@amd.com/
Link: https://lore.kernel.org/r/12155458.O9o76ZdvQC@kreacher
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY76ohgAKCRCAXGG7T9hj
vo8fAP0XJ94B7asqcN4W3EyeyfqxUf1eZvmWRhrbKqpLnmHLaQEA/uJBkXL49Zj7
TTcbxR1coJ/hPwhtmONU4TNtCZ+RXw0=
=2Ib5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two cleanup patches
- a fix of a memory leak in the Xen pvfront driver
- a fix of a locking issue in the Xen hypervisor console driver
* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: free active map buffer on pvcalls_front_free_map
hvc/xen: lock console list traversal
x86/xen: Remove the unused function p2m_index()
xen: make remove callback of xen driver void returned
As the ECRC configuration bits are part of AER registers, configure ECRC
only if AER is natively owned by the kernel.
Link: https://lore.kernel.org/r/20230112072111.20063-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
