iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
842,124 Commits 104 Branches 1,843 Tags
Commit Graph

5810 Commits

Author SHA1 Message Date
Stephen Boyd
efb1e0b071 Merge branches 'clk-ingenic', 'clk-mtk-mux', 'clk-qcom-sdm845-pcie', 'clk-mtk-crit' and 'clk-mtk' into clk-next 
* clk-ingenic:
  clk: ingenic: Remove set but not used variable 'enable'
  clk: ingenic: Fix doc of ingenic_cgu_div_info
  clk: ingenic: Fix round_rate misbehaving with non-integer dividers
  clk: ingenic: jz4740: Fix gating of UDC clock

* clk-mtk-mux:
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2

* clk-qcom-sdm845-pcie:
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks

* clk-mtk-crit:
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro

* clk-mtk:
  clk: mediatek: correct cpu clock name for MT8173 SoC
 2019-03-08 10:29:30 -08:00
Stephen Boyd
75f486c015 Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next 
- Updates for qcom MSM8998 GCC clks
 - qcom MSM8998 RPM managed clks
 - Random static analysis fixes for clk drivers

* clk-qcom-msm8998:
  clk: qcom: Make common clk_hw registrations
  clk: qcom: smd: Add support for MSM8998 rpm clocks
  clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998
  clk: qcom: Add missing freq for usb30_master_clk on 8998
  clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks

* clk-fractional-parent:
  clk: fractional-divider: check parent rate only if flag is set

* clk-x86-mv:
  clk: x86: Move clk-lpss.h to platform_data/x86

* clk-SA-fixes:
  clk: mediatek: fix platform_no_drv_owner.cocci warnings
  clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings
  clk: qoriq: Improve an error message
 2019-03-08 10:29:15 -08:00
Stephen Boyd
461ea6ab2c Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next 
- IPA clk support on Qualcomm RPMh clk controllers
 - Support sleeping gpios in clk-gpio type
 - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
 - Actions Semi S500 SoC clk support

* clk-qcom-rpmh:
  clk: qcom: clk-rpmh: Add IPA clock support

* clk-gpio-sleep:
  clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk

* clk-stm32mp1:
  dt-bindings: clock: remove unused definition for stm32mp1
  clk: stm32mp1: fix bit width of hse_rtc divider
  clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag
  clk: stm32mp1: fix HSI divider flag
  clk: stm32mp1: fix mcu divider table
  clk: stm32mp1: set ck_csi as critical clock
  clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
  clk: stm32mp1: parent clocks update

* clk-qcom-qcs404:
  clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock
  clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs
  clk: qcom: remove empty lines in clk-rcg.h

* clk-actions-s500:
  clk: actions: Add clock driver for S500 SoC
  dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU
  clk: actions: Add configurable PLL delay
 2019-03-08 10:27:52 -08:00
Stephen Boyd
e7faa095cb Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next 
- Split LCDC into two clks on the Marvell MMP2 SoC

* clk-imx:
  clk: imx8mq: add GPIO clocks to clock tree
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: imx: imx8mm: Mark init function __init
  clk: imx8mq: Add the missing ARM clock
  dt-bindings: imx8mq-clock: Add the missing ARM clock
  clk: imx: imx8mq: Fix the rate propagation for arm pll
  clk: imx8mq: Add support for the CLKO1 clock
  clk: imx8mq: Fix the CLKO2 source select list
  clk: imx8mq: Add missing M4 clocks
  clk: imx: Add clock driver support for imx8mm
  dt-bindings: imx: Add clock binding doc for imx8mm
  clk: imx: Add PLLs driver for imx8mm soc
  clk: imx5: add imx5_SCC2_IPG_GATE
  clk: imx: scu: add set parent support
  clk: imx: scu: add fallback compatible string support
  clk: imx8mq: Make parent names arrays const pointers
  clk: imx: Make parents const pointer in mux wrappers
  clk: imx: Make parent_names const pointer in composite-8m

* clk-samsung:
  clk: samsung: s3c2443: Mark expected switch fall-through
  clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
  clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
  clk: samsung: exynos5433: Add selected IMEM clocks
  clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
  clk: samsung: exynos5433: Fix name typo in sssx
  clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
  clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs

* clk-ti:
  clk: clk-twl6040: Fix imprecise external abort for pdmclk
  ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
  clk: ti: check clock type before doing autoidle ops
  clk: ti: add a usecount for autoidle
  clk: ti: generalize the init sequence of clk_hw_omap clocks
  clk: ti: remove usage of CLK_IS_BASIC
  clk: ti: add new API for checking if a provided clock is an OMAP clock
  clk: ti: move clk_hw_omap list handling under generic part of the driver

* clk-uniphier-gear:
  clk: uniphier: Fix update register for CPU-gear

* clk-mmp2-lcdc:
  clk: mmp2: separate LCDC peripheral clk form the display clock
  dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
 2019-03-08 10:27:40 -08:00
Stephen Boyd
3f8e7e7247 Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next 
- Add a {devm_}clk_get_optional() API
 - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups

* clk-optional:
  clk: Add (devm_)clk_get_optional() functions
  clk: Add comment about __of_clk_get_by_name() error values

* clk-devm-clkdev-register:
  clk: clk-st: avoid clkdev lookup leak at remove
  clk: clk-max77686: Clean clkdev lookup leak and use devm
  clkdev: add managed clkdev lookup registration

* clk-allwinner:
  clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it

* clk-meson: (22 commits)
  clk: meson: meson8b: fix the naming of the APB clocks
  dt-bindings: clock: meson8b: add APB clock definition
  clk: meson: Add G12A AO Clock + Reset Controller
  dt-bindings: clk: add G12A AO Clock and Reset Bindings
  clk: meson: factorise meson64 peripheral clock controller drivers
  clk: meson: g12a: add peripheral clock controller
  dt-bindings: clk: meson: add g12a periph clock controller bindings
  clk: meson: pll: update driver for the g12a
  clk: meson: rework and clean drivers dependencies
  clk: meson: axg-audio does not require syscon
  clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
  clk: export some clk_hw function symbols for module drivers
  clk: meson: ao-clkc: claim clock controller input clocks from DT
  clk: meson: axg: claim clock controller input clock from DT
  clk: meson: gxbb: claim clock controller input clock from DT
  clk: meson: meson8b: add the GPU clock tree
  clk: meson: meson8b: use a separate clock table for Meson8
  clk: meson: axg-ao: add 32k generation subtree
  clk: meson: gxbb-ao: replace cec-32k with the dual divider
  clk: meson: add dual divider clock driver
  ...

* clk-renesas:
  clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
  clk: renesas: r8a774c0: Add TMU clock
  clk: renesas: r8a77980: Add RPC clocks
  clk: renesas: rcar-gen3: Add RPC clocks
  clk: renesas: rcar-gen3: Add spinlock
  clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
  clk: renesas: r8a774c0: Correct parent clock of DU
  clk: renesas: r8a774a1: Add missing CANFD clock
  clk: renesas: r8a774c0: Add missing CANFD clock
 2019-03-08 10:27:21 -08:00
Stephen Boyd
7e2570031a Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next 
- Various DT of_node refcount fixes
 - Support for fixed rate clks populated from an MMIO register
 - Remove clps711x driver as the board support is gone

* clk-of-refcount:
  clk: dove: fix refcount leak in dove_clk_init()
  clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
  clk: armada-xp: fix refcount leak in axp_clk_init()
  clk: kirkwood: fix refcount leak in kirkwood_clk_init()
  clk: armada-370: fix refcount leak in a370_clk_init()
  clk: vf610: fix refcount leak in vf610_clocks_init()
  clk: imx7d: fix refcount leak in imx7d_clocks_init()
  clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
  clk: imx6q: fix refcount leak in imx6q_clocks_init()
  clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
  clk: socfpga: fix refcount leak
  clk: ti: fix refcount leak in ti_dt_clocks_register()
  clk: qoriq: fix refcount leak in clockgen_init()
  clk: highbank: fix refcount leak in hb_clk_init()

* clk-mmio-fixed-clock:
  clk: Add Fixed MMIO clock driver
  dt-bindings: clk: Add bindings for Fixed MMIO clock

* clk-remove-clps:
  clk: clps711x: Remove board support

* clk-socfpga-parent:
  clk: socfpga: Don't have get_parent for single parent ops

* clk-struct-size:
  clk: imx: imx7ulp: use struct_size() in kzalloc()
 2019-03-08 10:26:59 -08:00
Stephen Boyd
043f44aba9 clk: highbank: Convert to CLK_IS_CRITICAL 
This code is hand-rolling the CLK_IS_CRITICAL flag to keep a clk on once
it's registered. Just mark it as CLK_IS_CRITICAL instead so that the
framework can handle keeping the clk prepared and enabled for all
eternity.

Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-06 14:14:44 -08:00
Linus Torvalds
384d11fa0e ARM: SoC driver updates for 5.1 
As usual, the drivers/tee and drivers/reset subsystems get merged
 here, with the expected set of smaller updates and some new hardware
 support. The tee subsystem now supports device drivers to be attached
 to a tee, the first example here is a random number driver with its
 implementation in the secure world.
 
 Three new power domain drivers get added for specific chip families:
  - Broadcom BCM283x chips (used in Raspberry Pi)
  - Qualcomm Snapdragon phone chips
  - Xilinx ZynqMP FPGA SoCs
 
 One new driver is added to talk to the BPMP firmware on NVIDIA
 Tegra210
 
 Existing drivers are extended for new SoC variants from NXP,
 NVIDIA, Amlogic and Qualcomm.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcfpKpAAoJEGCrR//JCVInMpYQANwKKWOTm5NHqtf7/ZKBzx6/
 Yk7Jj8QLGKrHScnuBZSBvTwv5Cc5O5Ye+tAuGVArOoD2ktXlLZmHZ/ZPFAudT3di
 aFYbA44RNhv+O/xOmToDCCjSHm176hwUY0Cs5bFnfx6TcMsdOYIQIG+XQKx/a9zg
 3ZBEv7wZqcBArLc0X2Z2/uiVrEIh3wWwXytvw+8TG8ifUfpbDxRUxDlj1JRDpjMu
 yX4q8JDhdQvi2FTXbXcEHTdQ6RT11svPM/YxQDxfULRK9aNKf4GZJ4QlwZy+SO7N
 cEFxDd4ML/iJ1LjalvtXGkR0xrw9/gOlO3vbB9Uw3EngBDUSQfHmqJet10a14l8q
 KcToe3teIB+Z1R+plrt+h5UDJTbVibgZXhU6wIdkDgtF6oTyg1moIbTqNKHgcA3b
 HLJv4gFejeluQzJ/3dZHBnkvJo1XFAvGFmFXle0bmJRFtDx73CKnf6MA9N82l2/x
 nTn4LTxXIJVKWTWAs1qkrFyIx1gOrpGhiHPQ2JiOPMZLstz3Sr6tiJuWOr+1Ex4/
 UlZsD/CrRb+SbPBonpkD+bvzSR+j0M72A7hGmfZcDzainciWgunyXglUlzO/MT24
 C6p4R9MZ2Fffoe8pESppabRNUItp8gNsNGI7CY1IK8pgpxLrujw8OnqykpV0VETo
 As+6dZrHfPNSuI7udJi5
 =+DOl
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, the drivers/tee and drivers/reset subsystems get merged
  here, with the expected set of smaller updates and some new hardware
  support. The tee subsystem now supports device drivers to be attached
  to a tee, the first example here is a random number driver with its
  implementation in the secure world.

  Three new power domain drivers get added for specific chip families:
   - Broadcom BCM283x chips (used in Raspberry Pi)
   - Qualcomm Snapdragon phone chips
   - Xilinx ZynqMP FPGA SoCs

  One new driver is added to talk to the BPMP firmware on NVIDIA
  Tegra210

  Existing drivers are extended for new SoC variants from NXP, NVIDIA,
  Amlogic and Qualcomm"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits)
  tee: optee: update optee_msg.h and optee_smc.h to dual license
  tee: add cancellation support to client interface
  dpaa2-eth: configure the cache stashing amount on a queue
  soc: fsl: dpio: configure cache stashing destination
  soc: fsl: dpio: enable frame data cache stashing per software portal
  soc: fsl: guts: make fsl_guts_get_svr() static
  hwrng: make symbol 'optee_rng_id_table' static
  tee: optee: Fix unsigned comparison with less than zero
  hwrng: Fix unsigned comparison with less than zero
  tee: fix possible error pointer ctx dereferencing
  hwrng: optee: Initialize some structs using memset instead of braces
  tee: optee: Initialize some structs using memset instead of braces
  soc: fsl: dpio: fix memory leak of a struct qbman on error exit path
  clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static
  soc: qcom: llcc-slice: Fix typos
  qcom: soc: llcc-slice: Consolidate some code
  qcom: soc: llcc-slice: Clear the global drv_data pointer on error
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  ...
 2019-03-06 09:41:12 -08:00
Stephen Boyd
cf13f28968 clk: Move of_clk_*() APIs into clk.c from clkdev.c 
The API between clk.c and clkdev.c is purely getting the clk_hw
structure (or the struct clk if it's not CCF) and then turning that
struct clk_hw pointer into a struct clk pointer via clk_hw_create_clk().
There's no need to complicate clkdev.c with these DT parsing details
that are only relevant to the common clk framework. Move the DT parsing
logic into the core framework and just expose the APIs to get a clk_hw
pointer and convert it.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-01 11:17:22 -08:00
Stephen Boyd
efa850487a clk: Inform the core about consumer devices 
We'd like to have a pointer to the device that's consuming a particular
clk in the clk framework so we can link the consumer to the clk provider
with a PM device link. Add a device argument to clk_hw_create_clk() for
this so it can be used in subsequent patches to add and remove the link.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-01 11:17:22 -08:00
Stephen Boyd
4472287a3b clk: Introduce of_clk_get_hw_from_clkspec() 
We want to get struct clk_hw pointers from a DT clk specifier (i.e. a
clocks property) so that we can find parent clks without searching for
globally unique clk names. This should save time by avoiding the global
string search for clks that are external to the clock controller
providing the clk and let us move away from string comparisons in
general.

Introduce of_clk_get_hw_from_clkspec() which is largely the DT parsing
part of finding clks implemented in clkdev.c and have that return a
clk_hw pointer instead of converting that into a clk pointer. This lets
us push up the clk pointer creation to the caller in clk_get() and
avoids the need to push the dev_id and con_id throughout the DT parsing
code.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-01 11:17:22 -08:00
Miquel Raynal
2447883934 clk: core: clarify the check for runtime PM 
Currently, the core->dev entry is populated only if runtime PM is
enabled. Doing so prevents accessing the device structure in any
case.

Keep the same logic but instead of using the presence of core->dev as
the only condition, also check the status of
pm_runtime_enabled(). Then, we can set the core->dev pointer at any
time as long as a device structure is available.

This change will help supporting device links in the clock subsystem.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
[sboyd@kernel.org: Change to a boolean flag]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-01 11:17:16 -08:00
Stephen Boyd
1df4046a93 clk: Combine __clk_get() and __clk_create_clk() 
The __clk_get() function is practically a private clk implementation
detail now. No architecture defines it, and given that new code should
be using the common clk framework there isn't a need for it to keep
existing just to serve clkdev purposes. Let's fold it into the
__clk_create_clk() function and make that a little more generic by
renaming it to clk_hw_create_clk(). This will allow the framework to
create a struct clk handle to a particular clk_hw pointer and link it up
as a consumer wherever that's needed.

Doing this also lets us get rid of the __clk_free_clk() API that had to
be kept in sync with __clk_put(). Splitting that API up into the "link
and unlink from consumer list" phase and "free the clk pointer" phase
allows us to reuse that logic in a couple places, simplifying the code.

Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-03-01 11:16:14 -08:00
Anson Huang
0c91c11c7d clk: imx8mq: add GPIO clocks to clock tree 
i.MX8MQ has clock gate for each GPIO bank, add them
into clock tree for GPIO driver to manage.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-28 10:28:28 -08:00
Seiya Wang
64f4466c88 clk: mediatek: correct cpu clock name for MT8173 SoC 
Correct cpu clock name from ca57 to ca72 since MT8173 does use cortex-a72.

Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 10:17:40 -08:00
Abel Vesa
e9dda4af68 clk: imx: Refactor entire sccg pll clk 
Make the entire combination of plls to be one single clock. The parents used
for bypasses are specified each as an index in the parents list.
The determine_rate does a lookup throughout all the possible combinations
for all the divs and returns the best possible 'setup' which in turn is used
by set_rate later to set up all the divs and bypasses.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 10:09:31 -08:00
Anson Huang
3b9ea606cd clk: imx: scu: add cpu frequency scaling support 
On NXP's i.MX SoCs with system controller inside, CPU frequency
scaling can ONLY be done by system controller firmware, and it
can ONLY be requested from secure mode, so Linux kernel has to
call ARM SMC to trap to ARM-Trusted-Firmware to request system
controller firmware to do CPU frequency scaling.

This patch adds i.MX system controller CPU frequency scaling support,
it reuses cpufreq-dt driver and implement the CPU frequency scaling
inside SCU clock driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 10:03:38 -08:00
Jasper Mattsson
b35656de2a clk: mediatek: Mark bus and DRAM related clocks as critical 
Currently, DRAM-related clocks are not marked with CLK_IS_CRITICAL
for MT6797. This causes memory corruption when the system is
booted without clk_ignore_unused.
This patch marks MUX ddrphycfg_sel as well as gates infra_dramc_f26m
and infra_dramc_b_f26m as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 09:54:50 -08:00
Jasper Mattsson
5a1cc4c27a clk: mediatek: Add flags to mtk_gate 
This is required to mark gates as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Acked-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 09:53:39 -08:00
Jasper Mattsson
03c4fda603 clk: mediatek: Add MUX_FLAGS macro 
This is required to mark outputs of certain MUXes as CLK_IS_CRITICAL.

Signed-off-by: Jasper Mattsson <jasu@njomotys.info>
Acked-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 09:53:30 -08:00
Bjorn Andersson
4b5a59a265 clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks 
The PCIe PIPE clock in the GCC is fed by the PIPE clock coming from the
PHY, describe this relationship.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 09:41:52 -08:00
YueHaibing
635bd69bbe clk: ingenic: Remove set but not used variable 'enable' 
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/clk/ingenic/cgu.c: In function 'ingenic_pll_recalc_rate':
drivers/clk/ingenic/cgu.c:86:15: warning:
 variable 'enable' set but not used [-Wunused-but-set-variable]

It's not used after commit ab27eb4bc365 ("clk: ingenic: Add code to
enable/disable PLLs")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-26 09:41:04 -08:00
Nicolas Ferre
97d010dc42 clk: at91: programmable: remove unneeded register read 
This register read is a leftover of a previous read/modify/write. We now use
regmap_update_bits(), so we don't need it anymore.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-25 09:23:45 -08:00
chunhui dai
d3174bc836 clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel 
The MUX clock of dpi1_sel should select the closet clock for itself.
We could add this flag to enable this function of MUX in CCF.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-25 09:19:33 -08:00
chunhui dai
b026a7eca1 clk: mediatek: add MUX_GATE_FLAGS_2 
Add MUX_GATE_FLAGS_2 for the clock which needs to set two falgs.
Such as some mux need to set the flags of "CLK_MUX_ROUND_CLOSEST".

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: wangyan wang <wangyan.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-25 09:19:32 -08:00
Fabrizio Castro
df446f7e6e clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK 
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD
was recently added and it's the core clock with the highest
index.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock")
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-25 09:13:19 -08:00
Paul Cercueil
7ca4c922aa clk: ingenic: Fix doc of ingenic_cgu_div_info 
The 'div' field does not represent a number of bits used to divide
(understand: right-shift) the divider, but a number itself used to
divide the divider.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 10:13:44 -08:00
Paul Cercueil
bc5d922c93 clk: ingenic: Fix round_rate misbehaving with non-integer dividers 
Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz.
This results in a theorical divider of 41.999993 which is then rounded
up to 42. The .round_rate function would then return (180 MHz / 42) as
the clock, rounded down, so 4.285714 MHz.

Calling clk_set_rate on 4.285714 MHz would round the rate again, and
give a theorical divider of 42,0000028, now rounded up to 43, and the
rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not
what we requested.

Fix this by rounding up the divisions.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Maarten ter Huurne <maarten@treewalker.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 10:13:43 -08:00
YueHaibing
8122966318 clk: mediatek: fix platform_no_drv_owner.cocci warnings 
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 10:01:31 -08:00
YueHaibing
e7e6198c60 clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings 
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.

Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().

Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 10:01:21 -08:00
Dan Carpenter
8f99f5eab0 clk: qoriq: Improve an error message 
We intended to print "ret" but there is a copy and paste bug from the
previous error message.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 10:00:45 -08:00
Michał Mirosław
bb631af3d5 clk: at91: optimize clk_round_rate() for AUDIO_PLL 
Stop the search for parent rate when exact match is found.

This makes for 3 clk_round_rate() calls instead of 64 of them on
SAMA5D2-based board when searching for 12.288MHz clock.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 09:54:17 -08:00
Andy Shevchenko
a9443a6328 clk: x86: Move clk-lpss.h to platform_data/x86 
clk-lpss.h is solely x86 related header. Move it to correct folder.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 00:14:31 -08:00
Katsuhiro Suzuki
d13501a2be clk: fractional-divider: check parent rate only if flag is set 
Custom approximation of fractional-divider may not need parent clock
rate checking. For example Rockchip SoCs work fine using grand parent
clock rate even if target rate is greater than parent.

This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag
is set.

For detailed example, clock tree of Rockchip I2S audio hardware.
  - Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz.
  - i2s1_div is integer divider can divide N (N is 1~128).
    Input clock is CPLL or GPLL. Initial divider value is N = 1.
    Ex) PLL = CPLL, N = 10, i2s1_div output rate is
      CPLL / 10 = 1.2GHz / 10 = 120MHz
  - i2s1_frac is fractional divider can divide input to x/y, x and
    y are 16bit integer.

CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK
GPLL --> |          | ,--------------'    |          |
                      `--> i2s1_frac ---> |          |

Clock mux system try to choose suitable one from i2s1_div and
i2s1_frac for master clock (MCLK) of I2S1.

Bad scenario as follows:
  - Try to set MCLK to 8.192MHz (32kHz audio replay)
    Candidate setting is
    - i2s1_div: GPLL / 60 = 8.192MHz
    i2s1_div candidate is exactly same as target clock rate, so mux
    choose this clock source. i2s1_div output rate is changed
    491.52MHz -> 8.192MHz

  - After that try to set to 11.2896MHz (44.1kHz audio replay)
    Candidate settings are
    - i2s1_div : CPLL / 107 = 11.214945MHz
    - i2s1_frac: i2s1_div   = 8.192MHz
      This is because clk_fd_round_rate() thinks target rate
      (11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz)
      and returns parent clock rate.

Above is current upstreamed behavior. Clock mux system choose
i2s1_div, but this clock rate is not acceptable for I2S driver, so
users cannot replay audio.

Expected behavior is:
  - Try to set master clock to 11.2896MHz (44.1kHz audio replay)
    Candidate settings are
    - i2s1_div : CPLL / 107          = 11.214945MHz
    - i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz
                 Change i2s1_div to GPLL / 1 = 491.52MHz at same
                 time.

If apply this commit, clk_fd_round_rate() calls custom approximate
function of Rockchip even if target rate is higher than parent.
Custom function changes both grand parent (i2s1_div) and parent
(i2s_frac) settings at same time. Clock mux system can choose
i2s1_frac and audio works fine.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@kernel.org: Make function into a macro instead]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 00:11:47 -08:00
Jeffrey Hugo
760be6586f clk: qcom: Make common clk_hw registrations 
Several clock controller drivers define a list of clk_hw devices, and then
register those devices in probe() before using common code to process the
rest of initialization.  Extend the common code to accept a list of clk_hw
devices to process, thus eliminating many duplicate implementations.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 00:06:57 -08:00
Manivannan Sadhasivam
ed6b4795ec clk: actions: Add clock driver for S500 SoC 
Add common clock driver for Actions Semi S500 SoC.

Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
[Mani: cleaned up the driver]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-22 00:01:08 -08:00
Manivannan Sadhasivam
9831289f6f clk: actions: Add configurable PLL delay 
S500 SoC requires configurable delay for different PLLs. Hence, add
a separate macro for declaring a PLL with configurable delay and also
modify the existing OWL_PLL_NO_PARENT macro to use default delay so
that no need to modify the existing S700/S900 drivers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 23:58:12 -08:00
Stephen Boyd
341fdf2602 clk: imx: imx8mm: Mark init function __init 
It calls another __init marked function and thus causes a section
mismatch if we don't mark it this way.

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 15:29:10 -08:00
Taniya Das
9d575719ca clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock 
The CFG/M/N/D registers are at an offset of 0x20 from the CMD register
only for blsp1_uart3 clock, so add it for uart3 only.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:18:13 -08:00
Taniya Das
96dc791d0b clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs 
The RCG CFG/M/N/D register base could be at a different offset than
the CMD register, so introduce a cfg_offset to identify the offset
with respect to the CMD RCGR register.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:18:12 -08:00
Vinod Koul
fe6b580ec6 clk: qcom: remove empty lines in clk-rcg.h 
Remove the redundant empty lines crept in.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:18:11 -08:00
Gabriel Fernandez
97621d22df clk: stm32mp1: fix bit width of hse_rtc divider 
Fix the bit width of the hse rtc divider because it's off by one.

Fixes: 2c87c9d33117 ("clk: stm32mp1: add RTC clock")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:22 -08:00
Gabriel Fernandez
f9b76fd24d clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag 
The divisor of ethptp_k and ck_hse_rtc clocks is: 'value register
plus one'.
Then CLK_DIVIDER_ALLOW_ZERO flag has no effect and is useless here.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:21 -08:00
Gabriel Fernandez
d3f2e33c87 clk: stm32mp1: fix HSI divider flag 
The divider of HSI (clk-hsi-div) is power of two divider.

Fixes: 9bee94e7b7da ("clk: stm32mp1: Introduce STM32MP1 clock driver")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:21 -08:00
Gabriel Fernandez
140fc4e406 clk: stm32mp1: fix mcu divider table 
index 8: ck_mcu is divided by 256 (not 512)

Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:20 -08:00
Gabriel Fernandez
c488b24f86 clk: stm32mp1: set ck_csi as critical clock 
ck_csi is used for IO compensation so it should be
considered as "always-on" and kept on.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:19 -08:00
Gabriel Fernandez
72cfd1ad10 clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks 
STM32MP1 clock IP offers lots of Kernel clocks that are shared
by multiple IP's at the same time.
Then boot loader applies a clock tree that allows to use all IP's
at same time and with the maximum of performance.
Not change parents on a change rate on kernel clocks ensures
the integrity of the system.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:18 -08:00
Gabriel Fernandez
749c9e553e clk: stm32mp1: parent clocks update 
Fixes parent clock for axi, fdcan, sai and adc12 clocks.

Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:13:06 -08:00
Tony Lindgren
5ae51d67ae clk: clk-twl6040: Fix imprecise external abort for pdmclk 
I noticed that modprobe clk-twl6040 can fail after a cold boot with:
abe_cm:clk:0010:0: failed to enable
...
Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20

WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24
...
(clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90)
(_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244)
(_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44)
(omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108)
(sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8)
(__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694)
(rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84)
(__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c)
(sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98)

After searching around for a similar issue, I came across an earlier fix
that never got merged upstream in the Android tree for glass-omap-xrr02.
There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata"
by Misael Lopez Cruz <misael.lopez@ti.com>.

Based on my observations, this fix is also needed when cold booting
devices, and not just for deeper idle modes. Since we now have a clock
driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare().

Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:11:23 -08:00
Thomas Petazzoni
c0189feead clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk 
The current implementation of gpio-gate-clk enables/disables the clock
using the GPIO in the ->enable() and ->disable() clock callbacks. This
requires the GPIO to be configurable in atomic contexts. While it is
the case for most memory-mapped GPIO controllers, it is not the case
for GPIO expanders on I2C or SPI.

This commit extends the gpio-gate-clk to check whether the GPIO calls
require sleeping or not. If sleeping is not required, the current
implementation based on ->enable()/->disable() is kept. However, if
sleeping is needed, we instead implement the logic in the ->prepare()
and ->unprepare() hooks. Thanks to this, a gate clock connected to a
GPIO on a GPIO expander can be controlled with the existing driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[sboyd@kernel.org: Mark clk ops static]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2019-02-21 14:05:25 -08:00