Commit Graph

11385 Commits

Author SHA1 Message Date
David S. Miller
cfd6920175 wireless-drivers-next patches for v5.9
First set of patches for v5.9. This comes later than usual as I was
 offline for two weeks. The biggest change here is moving Microchip
 wilc1000 driver from staging. There was an immutable topic branch with
 one commit moving the whole driver and the topic branch was pulled
 both to staging-next and wireless-drivers-next. At the moment the only
 reported conflict is in MAINTAINERS file, so I'm hoping the move
 should go smoothly.
 
 Other notable changes are ath11k getting 6 GHz band support and rtw88
 supporting RTL8821CE. And there's also the usual fixes, API changes
 and cleanups all over.
 
 Major changes:
 
 wilc1000
 
 * move from drivers/staging to drivers/net/wireless/microchip
 
 ath11k
 
 * add 6G band support
 
 * add spectral scan support
 
 iwlwifi
 
 * make FW reconfiguration quieter by not using warn level
 
 rtw88
 
 * add support for RTL8821CE
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJfFWQeAAoJEG4XJFUm622bVAwH/3r2oR+NS1kNDNGi9nrLAIav
 trLgPa2VbgPVgTcwIckfvZFl6BK9zo1KG6u6jYp45C6uNBJNESjarf8aLAXvXdFt
 t0yBkb6OCUq+efoOFbxV2im6ER57aN27POsn74xrCeR3fwZgY9QSHRMjQ5x1tjWH
 JdVatT6jtu2LuxsTjfS0K5kjeuyE0vE1iCUlsQ5qwcSLODGa9u7ydheoNcLOHvss
 ACun8zXvWqJhTar+iJHiTJTWyQPE6es0V1SAw0RnTuLRRmtv/Q9Zx4YOH2d3JkOC
 55mfgO3uNzw8fcJ5hoILHtXxhI2qtSkdydIFbE1U9CgBKE39Uo0VgFf9fl6VJRg=
 =7a5a
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-2020-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.9

First set of patches for v5.9. This comes later than usual as I was
offline for two weeks. The biggest change here is moving Microchip
wilc1000 driver from staging. There was an immutable topic branch with
one commit moving the whole driver and the topic branch was pulled
both to staging-next and wireless-drivers-next. At the moment the only
reported conflict is in MAINTAINERS file, so I'm hoping the move
should go smoothly.

Other notable changes are ath11k getting 6 GHz band support and rtw88
supporting RTL8821CE. And there's also the usual fixes, API changes
and cleanups all over.

Major changes:

wilc1000

* move from drivers/staging to drivers/net/wireless/microchip

ath11k

* add 6G band support

* add spectral scan support

iwlwifi

* make FW reconfiguration quieter by not using warn level

rtw88

* add support for RTL8821CE
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20 17:52:50 -07:00
Nicolas Ferre
4f5479e2ee MAINTAINERS: net: wilc1000: Update entry
As Adham's email address is bouncing, remove him from wilc1000 entry and
add Claudiu as a new co-maintainer. Claudiu follows wilc1000 driver
development for a long time and contributed to it already.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200710051826.3267-2-ajay.kathat@microchip.com
2020-07-14 20:52:22 +03:00
David S. Miller
71930d6102 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
All conflicts seemed rather trivial, with some guidance from
Saeed Mameed on the tc_ct.c one.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11 00:46:00 -07:00
Linus Torvalds
5a764898af Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
    BPF programs, from Maciej Żenczykowski.

 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
    Mariappan.

 3) Slay memory leak in nl80211 bss color attribute parsing code, from
    Luca Coelho.

 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.

 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
    Dumazet.

 6) xsk code dips too deeply into DMA mapping implementation internals.
    Add dma_need_sync and use it. From Christoph Hellwig

 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.

 8) Check for disallowed attributes when loading flow dissector BPF
    programs. From Lorenz Bauer.

 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
    Jason A. Donenfeld.

10) Don't advertise checksum offload on ipa devices that don't support
    it. From Alex Elder.

11) Resolve several issues in TCP MD5 signature support. Missing memory
    barriers, bogus options emitted when using syncookies, and failure
    to allow md5 key changes in established states. All from Eric
    Dumazet.

12) Fix interface leak in hsr code, from Taehee Yoo.

13) VF reset fixes in hns3 driver, from Huazhong Tan.

14) Make loopback work again with ipv6 anycast, from David Ahern.

15) Fix TX starvation under high load in fec driver, from Tobias
    Waldekranz.

16) MLD2 payload lengths not checked properly in bridge multicast code,
    from Linus Lüssing.

17) Packet scheduler code that wants to find the inner protocol
    currently only works for one level of VLAN encapsulation. Allow
    Q-in-Q situations to work properly here, from Toke
    Høiland-Jørgensen.

18) Fix route leak in l2tp, from Xin Long.

19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
    support and various protocols. From Martin KaFai Lau.

20) Fix socket cgroup v2 reference counting in some situations, from
    Cong Wang.

21) Cure memory leak in mlx5 connection tracking offload support, from
    Eli Britstein.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
  mlxsw: pci: Fix use-after-free in case of failed devlink reload
  mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
  net: macb: fix call to pm_runtime in the suspend/resume functions
  net: macb: fix macb_suspend() by removing call to netif_carrier_off()
  net: macb: fix macb_get/set_wol() when moving to phylink
  net: macb: mark device wake capable when "magic-packet" property present
  net: macb: fix wakeup test in runtime suspend/resume routines
  bnxt_en: fix NULL dereference in case SR-IOV configuration fails
  libbpf: Fix libbpf hashmap on (I)LP32 architectures
  net/mlx5e: CT: Fix memory leak in cleanup
  net/mlx5e: Fix port buffers cell size value
  net/mlx5e: Fix 50G per lane indication
  net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
  net/mlx5e: Fix VXLAN configuration restore after function reload
  net/mlx5e: Fix usage of rcu-protected pointer
  net/mxl5e: Verify that rpriv is not NULL
  net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
  net/mlx5: Fix eeprom support for SFP module
  cgroup: Fix sock_cgroup_data on big-endian.
  selftests: bpf: Fix detach from sockmap tests
  ...
2020-07-10 18:16:22 -07:00
Gerald Schaefer
dd9ce2d6ee MAINTAINERS: update email address for Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-10 15:06:49 +02:00
Heiko Carstens
2c08f65fd7 MAINTAINERS: update email address for Heiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-10 15:06:44 +02:00
Linus Torvalds
684c8ccc40 Devicetree fixes for v5.8, take 2:
- Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
   warnings
 
 - Various fixes for DT binding check warnings
 
 - A couple of build fixes/improvements for binding checks
 
 - ReST formatting improvements for writing-schema.rst
 
 - Document reference fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl7+UtkQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw78WEACCkLrvgqJ6fkAInzOGz8yXgrVEU2mWYlgD
 4mt5K0M7mVeNonuQJDCbFAvmisKTS/Gxjw5234k68aJ/0C7oCRjMhB/wIKgU/gzm
 K3mBOI02CAxCZzKvQQloESZV62nUI9wOcRTF3K5BjMsxsGbNBzaZPxP3A9Uku34t
 VpY/H23ZXZ1FeWx0OjeMF6lKJP4cWX4l4Ay9Y9oE4m31LXq64Cb5VBBxo70yqJZB
 QiTCqBBS+WpTCvbukKn+rCazeRka5evCSC0vlXum4WkifZDMIclke7gS4QjfsJr/
 DM6OmAfNRfOyYO6yGKZzU2eu98q/wFggGaqyJ2vn7Ht0CbzWqgrCaQzEN5ksxwak
 CKe9KHS/W2PK3nxRFa1GfznEoBsueckkzmv4hxuwafDuBPgt+UPDExbruHvV3qHC
 O4W2zdYWJaQE9ZeiBkZmAbDM+cdbzyd0qHFcuNuU7d53Ez+XDpVDhVE2WX3Hiegw
 vTLKyId9McvHrYlRZqNgUSbKgqCCPkjfdU5ANAQB7LSFuiolNZgqcDZZ2Jq9nHxS
 irX1dvPKgXxTVz4SAZ6vtrPp5ZueSxcgYGkdC6A+3sm7Xi4RdTgHeRrHFDP3QxrE
 FoGAb8ZBzGL6EVdiyIDMPSN2rnABKntheixVZ8bQ4yA8BAEKapuoMRAqCedNW9q+
 ixQ/tlB83w==
 =/l5U
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
   warnings

 - Various fixes for DT binding check warnings

 - A couple of build fixes/improvements for binding checks

 - ReST formatting improvements for writing-schema.rst

 - Document reference fixes

* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clock: imx: Fix e-mail address
  dt-bindings: thermal: k3: Fix the reg property
  dt-bindings: thermal: Remove soc unit address
  dt-bindings: display: arm: versatile: Pass the sysreg unit name
  dt-bindings: usb: aspeed: Remove the leading zeroes
  dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
  dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
  dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
  dt-bindings: mailbox: zynqmp_ipi: fix unit address
  dt-bindings: bus: uniphier-system-bus: fix warning in example
  scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
  doc: devicetree: bindings: fix spelling mistake
  docs: dt: minor adjustments at writing-schema.rst
  dt: fix reference to olpc,xo1.75-ec.txt
  dt: Fix broken references to renamed docs
  dt: fix broken links due to txt->yaml renames
  dt: update a reference for reneases pcar file renamed to yaml
2020-07-02 22:46:05 -07:00
Nicolas Ferre
ad4e2b6483 MAINTAINERS: net: macb: add Claudiu as co-maintainer
I would like that Claudiu becomes co-maintainer of the Cadence macb
driver. He's already participating to lots of reviews and enhancements
to this driver and knows the different versions of this controller.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02 14:33:50 -07:00
Linus Torvalds
e44b59cd75 ARM: SoC fixes for v5.8
Here are a couple of bug fixes, mostly for devicetree files
 
 NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to
     avoid hardware damage
   - Code fixes for a compiler warning and incorrect reference
     counting, both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.
 
 Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs
 
 STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration
 
 ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup
 
 TEE drivers:
   - MAINTAINERS: change tee mailing list
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl74uLEACgkQmmx57+YA
 GNnPHA/8DM6SnpONT9todCkl8NWe6SKWtjhb4hdmFyvWh2EQkau3HfTQhFsrX7N8
 1dZwPZlbyKl/np6D9MDctnk9S6LZjqUMVbJVpFbIdiBzHbD1rTE9ordBWehkymqm
 ZaxUe949QtKHgq+Duv4a3yuJUbxR8R01nyG0zsvGwWJwFYTlp/RPOoEZLK84RESK
 Kqimmg3UvjiRkaXBO+O/AqNeTUQtYyk8ru+5t2EkJW62QO/niU2107givmRikcrO
 pPfeP5hR4qtiTQGWEb2m4TWWkHlGpF0+bT2H4kzZGq99wFp1SqR46Hz+/5USCkwd
 vnIBFvJu9huQ2cQk0q9o998RAKBcg/ybG89MvuMWo5rQIy6NhXaJ6eb86yQggkei
 AnDa+mmLX4KcEi8LTI/I3n/4fHwg4tSRy+5RkzBRJBbTQQoRy9Bs3iQZhy6PE0fL
 rUm1wkNGH80nRQUOpiHxHb2PTdeGTialMAKgISqY4ltsGlSNUqneVxN1dYXytFMa
 mf7CM2ihJNe+Fyo52FFfDDt1re/A+ztbalX+oNGX8RbHlczFoZHldGYcAxGkosNE
 2MdAVWhvNR0E9nwYY8QsGN2e3IRdjnxc3hsiWPFhhHwskd1is7FDsnXdqU6qIr3I
 9HytkMhICr3cdnbqbVv/+5rTrZ89x/atQLUWJcj6PZk6WNZ/gA0=
 =P5b/
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bug fixes, mostly for devicetree files

  NXP i.MX:
   - Use correct voltage on some i.MX8M board device trees to avoid
     hardware damage
   - Code fixes for a compiler warning and incorrect reference counting,
     both harmless.
   - Fix the i.MX8M SoC driver to correctly identify imx8mp
   - Fix watchdog configuration in imx6ul-kontron device tree.

  Broadcom:
   - A small regression fix for the Raspberry-Pi firmware driver
   - A Kconfig change to use the correct timer driver on Northstar
   - A DT fix for the Luxul XWC-2000 machine
   - Two more DT fixes for NSP SoCs

  STmicroelectronics STI
   - Revert one broken patch for L2 cache configuration

  ARM Versatile Express:
   - Fix a regression by reverting a broken DT cleanup

  TEE drivers:
   - MAINTAINERS: change tee mailing list"

* tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: sti: Implement dummy L2 cache's write_sec"
  soc: imx8m: fix build warning
  ARM: imx6: add missing put_device() call in imx6q_suspend_init()
  ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
  soc: imx8m: Correct i.MX8MP UID fuse offset
  ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain
  ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM
  arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2
  arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range
  arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range
  ARM: dts: NSP: Correct FA2 mailbox node
  ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision()
  MAINTAINERS: change tee mailing list
  ARM: dts: NSP: Disable PL330 by default, add dma-coherent property
  ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP
  ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000
  arm: dts: vexpress: Move mcc node back into motherboard node
2020-06-28 14:55:18 -07:00
Arnd Bergmann
4c9f47ce57 Merge tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Change the TEE mailing list in MAINTAINERS

* tag 'tee-ml-for-v5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  MAINTAINERS: change tee mailing list

Link: https://lore.kernel.org/r/20200616075948.GA2288211@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-06-28 14:42:26 +02:00
Jakub Kicinski
95298d63c6 docs: networking: move remaining Ethernet driver docs to the hw section
Move docs for hinic and altera_tse under device_drivers/ethernet.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:45 -07:00
Jakub Kicinski
1447495025 docs: networking: move z8530 to the hw driver section
Move z8530 docs to hamradio and wan subdirectories.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
Jakub Kicinski
132db93572 docs: networking: reorganize driver documentation again
Organize driver documentation by device type. Most documents
have fairly verbose yet uninformative names, so let users
first select a well defined device type, and then search for
a particular driver.

While at it rename the section from Vendor drivers to
Hardware drivers. This seems more accurate, besides people
sometimes refer to out-of-tree drivers as vendor drivers.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26 16:08:44 -07:00
Linus Torvalds
7c902e2730 Merge branch 'akpm' (patches from Andrew)
Merge misx fixes from Andrew Morton:
 "31 patches.

  Subsystems affected by this patch series: hotfixes, mm/pagealloc,
  kexec, ocfs2, lib, mm/slab, mm/slab, mm/slub, mm/swap, mm/pagemap,
  mm/vmalloc, mm/memcg, mm/gup, mm/thp, mm/vmscan, x86,
  mm/memory-hotplug, MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
  MAINTAINERS: update info for sparse
  mm/memory_hotplug.c: fix false softlockup during pfn range removal
  mm: remove vmalloc_exec
  arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page
  x86/hyperv: allocate the hypercall page with only read and execute bits
  mm/memory: fix IO cost for anonymous page
  mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
  mm: workingset: age nonresident information alongside anonymous pages
  doc: THP CoW fault no longer allocate THP
  docs: mm/gup: minor documentation update
  mm/memcontrol.c: prevent missed memory.low load tears
  mm/memcontrol.c: add missed css_put()
  mm: memcontrol: handle div0 crash race condition in memory.low
  mm/vmalloc.c: fix a warning while make xmldocs
  media: omap3isp: remove cacheflush.h
  make asm-generic/cacheflush.h more standalone
  mm/debug_vm_pgtable: fix build failure with powerpc 8xx
  mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
  mm: fix swap cache node allocation mask
  slub: cure list_slab_objects() from double fix
  ...
2020-06-26 12:19:36 -07:00
Luc Van Oostenryck
19ef1f9dfe MAINTAINERS: update info for sparse
Update the info for sparse. More specifically:

 - change W entry to point to sparse.docs.kernel.org

 - add Q & B entry (patchwork & bugzilla)

Link: http://lkml.kernel.org/r/20200621144204.53938-1-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26 00:27:38 -07:00
Ajay Singh
5625f965d7 wilc1000: move wilc driver out of staging
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The
WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other
processors with minimal resource requirements with a simple
SPI/SDIO-to-Wi-Fi interface.

WILC1000 driver has been part of staging for few years. With
contributions from the community, it has improved significantly. Full
driver review has helped in achieving the current state.
The details for those reviews are captured in 1 & 2.

[1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/
[2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-06-26 08:46:46 +03:00
Linus Torvalds
4a21185cda Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

 2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

 5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

 6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

 9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...
2020-06-25 18:27:40 -07:00
Felix Fietkau
b0c34bde72 MAINTAINERS: update email address for Felix Fietkau
The old address has been bouncing for a while now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-22 12:57:11 -07:00
Linus Torvalds
a5c6a1f0fe Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:

 - a small collection of remaining API conversion patches (all acked)
   which allow to finally remove the deprecated API

 - some documentation fixes and a MAINTAINERS addition

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
  i2c: smbus: Fix spelling mistake in the comments
  Documentation/i2c: SMBus start signal is S not A
  i2c: remove deprecated i2c_new_device API
  Documentation: media: convert to use i2c_new_client_device()
  video: backlight: tosa_lcd: convert to use i2c_new_client_device()
  x86/platform/intel-mid: convert to use i2c_new_client_device()
  drm: encoder_slave: use new I2C API
  drm: encoder_slave: fix refcouting error for modules
2020-06-20 19:18:27 -07:00
Stefan Schmidt
e795a61a85 MAINTAINERS: update ieee802154 project website URL
Update URL to our new home.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2020-06-19 22:08:11 +02:00
Loic Poulain
28f9f8fb4f MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
[wsa: kept sorting]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-19 15:07:00 +02:00
Mauro Carvalho Chehab
9ac2a66158 dt: Fix broken references to renamed docs
Some files got renamed. Those were all fixed automatically by

	./scripts/documentation-file-ref-check --fix

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6866c0d6d10ce36bb151c2d3752a20eb5122c532.1592203542.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-18 11:06:24 -06:00
Mauro Carvalho Chehab
d985becff2 dt: fix broken links due to txt->yaml renames
There are some new broken doc links due to yaml renames
at DT. Developers should really run:

	./scripts/documentation-file-ref-check

in order to solve those issues while submitting patches.
This tool can even fix most of the issues with:

	./scripts/documentation-file-ref-check --fix

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/0e4a7f0b7efcc8109c8a41a2e13c8adde4d9c6b9.1592203542.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2020-06-18 10:45:05 -06:00
Jens Wiklander
cf5057e169 MAINTAINERS: change tee mailing list
The old TEE mailing list tee-dev@lists.linaro.org is about to be
retired. From now on please use op-tee@lists.trustedfirmware.org
instead.

Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-06-16 09:37:45 +02:00
Sergei Shtylyov
534a8bf0cc MAINTAINERS: switch to my private email for Renesas Ethernet drivers
I no longer work for Cogent Embedded (but my old email still works :-)),
and still would like to continue looking after the Renesas Ethernet drivers
and bindings.  Let's switch to my private email.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15 13:38:45 -07:00
Vladimir Oltean
6e701c2994 MAINTAINERS: merge entries for felix and ocelot drivers
The ocelot switchdev driver also provides a set of library functions for
the felix DSA driver, which in practice means that most of the patches
will be of interest to both groups of driver maintainers.

So, as also suggested in the discussion here, let's merge the 2 entries
into a single larger one:
https://www.spinics.net/lists/netdev/msg657412.html

Note that the entry has been renamed into "OCELOT SWITCH" since neither
Vitesse nor Microsemi exist any longer as company names, instead they
are now named Microchip (which again might be subject to change in the
future), so use the device family name instead.

Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15 13:22:17 -07:00
Linus Torvalds
91fa58840a Merge branch 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "I2C has quite some patches for you this time. I hope it is the move to
  per-driver-maintainers which is now showing results. We will see.

  The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
  larger refactoring of the Designware, Tegra, and PXA drivers, the
  Cadence driver supports being a slave now, and there is support to
  instanciate SPD eeproms for well-known cases (which will be
  user-visible because the i801 driver supports it), and some
  devm_platform_ioremap_resource() conversions which blow up the
  diffstat.

  Note that I applied the Nuvoton driver quite late, so some minor fixup
  patches arrived during the merge window. I chose to apply them right
  away because they were trivial"

* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
  i2c: Drop stray comma in MODULE_AUTHOR statements
  i2c: npcm7xx: npcm_i2caddr[] can be static
  MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
  i2c: npcm7xx: Fix a couple of error codes in probe
  i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
  i2c: npcm7xx: Remove unnecessary parentheses
  i2c: npcm7xx: Add support for slave mode for Nuvoton
  i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
  dt-bindings: i2c: npcm7xx: add NPCM I2C controller
  i2c: pxa: don't error out if there's no pinctrl
  i2c: add 'single-master' property to generic bindings
  i2c: designware: Add Baikal-T1 System I2C support
  i2c: designware: Move reg-space remapping into a dedicated function
  i2c: designware: Retrieve quirk flags as early as possible
  i2c: designware: Convert driver to using regmap API
  i2c: designware: Discard Cherry Trail model flag
  i2c: designware: Add Baytrail sem config DW I2C platform dependency
  i2c: designware: slave: Set DW I2C core module dependency
  i2c: designware: Use `-y` to build multi-object modules
  dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
  ...
2020-06-13 13:12:38 -07:00
Linus Torvalds
df2fbf5bfa - Add the hwmon support on the i.MX SC (Anson Huang)
- Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)
 
 - Use the PM QoS frequency changes for the devfreq cooling device (Matthias
   Kaehlcke)
 
 - Remove duplicate error messages from platform_get_irq() error handling
   (Markus Elfring)
 
 - Add support for the bandgap sensors (Keerthy)
 
 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)
 
 - Add Renesas R-Car maintainer entry (Niklas Söderlund)
 
 - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC
   thermal (Sudip Mukherjee)
 
 - Add latency constraint for the idle injection, the DT binding and the change
   the registering function (Daniel Lezcano)
 
 - Convert the thermal framework binding to the Yaml schema (Amit Kucheria)
 
 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva)
 
 - Thermal framework cleanups (alphabetic order for heads, replace module.h by
   export.h, make file naming consistent) (Amit Kucheria)
 
 - Merge tsens-common into the tsens driver (Amit Kucheria)
 
 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)
 
 - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver
   (Niklas Söderlund)
 
 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang)
 
 - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x
   thermal driver - trivial conflicts fixed (Matthew Garrett)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl7jra8ACgkQqDIjiipP
 6E+ugAgApBF6FsHoonWIvoSrzBrrbU2oqhEJA42Mx+iY/UnXi01I79vZ/8WpZt7M
 D1J01Kf0PUhRbywoKaoCX3Oh9ZO9PKq4N9ZC8yqdoD6GLl+rC9Wmr7Ui+c80klcv
 M9rYhpPYfNXTFj0saSbbFWNNhP4TvhzGsNj8foYVQDKyhjbSmNE5ipZlbmP23jlr
 O53SmJAwS5zxLOd8QA5nfSWP9FYYMuCR2AHj8BUCmxiAjXZLPNB/Hz2RRBr7q0MF
 zRo/4HJ04mSQYp0kluP/EBhz9g2wM/htIPyWRveB/ByKEYt3UNKjB++PJmPbu5UG
 dS3aXZhRfaPqpdsWrMB9fY7ll+oyfw==
 =T+RI
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...
2020-06-12 14:10:21 -07:00
Linus Torvalds
9433a51ec1 pwm: Changes for v5.8-rc1
Nothing too exciting for this cycle. A couple of fixes across the board,
 and Lee volunteered to help with patch review.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl7jhQUZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoZeGD/4r/owv45JI0iQU05zl9JQi
 hl4nQQcQqJYIZ2VraEKkpaZ509NYMr1y4wypxRIoezjsVPCbMpBr96Mb+J6IYU1h
 JV+qIqQgLw7qThjCPs7CltjZUEPjRiU5kyWD3nut5YRUo3V55WzbolYnZrV9UDcu
 gQ/PTehQ4ujdqENnwjhUlvbtjvCXnMreAHPPiBHzHJ+YesKAvIWLG645EdFpCEIZ
 hS4/PndU2WwMVcsyYzmVlKfB1bUjGwxGpqD1kSobf+CDxXLv8b9/L+L2eAU/O1om
 VnzHiGjsu+cnEWQmBV/A9Zwb10QfMiP7sEseFiy7mywqOZCX8GHxcUOhg9eJmXZb
 1A4PXAHHhgQayuAnR7u9w5XuC8hMypltPPaCfTdWkc5awBeZ3bgJYGYCR1OAs/7q
 aoHxtrwpvBlUCGSkBC5WSZdsf1XGBmy3Q0fZr232xKiUxBPeAnkVQS6bjYS7tOUh
 1xJrCFKR/BkFs0E4P8zyqRuRieh9GfwnKTw4dHO4QCFYEugXq/VYB/pUaofKoUdz
 gdFv5Pw73f2RjRK1Kdtc8lBnUa7lulsfP3ewjKdgO+Ob/w0w4o1VN6aJkC6SkHNk
 aWhhZipFZ4POUWFJVQkRHiTi88UIbMNVPabNlVWZvW6T9+uUKL7bdELbJXxrzzaK
 sLuKDgpNtSGfn8wu2un0sg==
 =QI2J
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Nothing too exciting for this cycle. A couple of fixes across the
  board, and Lee volunteered to help with patch review"

* tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Add missing "CONFIG_" prefix
  MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem
  pwm: imx27: Fix rounding behavior
  pwm: rockchip: Simplify rockchip_pwm_get_state()
  pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
  pwm: tegra: Support dynamic clock frequency configuration
  pwm: jz4740: Add support for the JZ4725B
  pwm: jz4740: Make PWM start with the active part
  pwm: jz4740: Enhance precision in calculation of duty cycle
  pwm: jz4740: Drop dependency on MACH_INGENIC
  pwm: lpss: Fix get_state runtime-pm reference handling
  pwm: sun4i: Support direct clock output on Allwinner A64
  pwm: Add support for Azoteq IQS620A PWM generator
  dt-bindings: pwm: rcar: add r8a77961 support
  pwm: Add missing '\n' in log messages
2020-06-12 12:24:42 -07:00
Linus Torvalds
8f02f363f7 IOMMU drivers directory structure cleanup:
- Move the Intel and AMD IOMMU drivers into their own
 	  subdirectory. Both drivers consist of several files by now and
 	  giving them their own directory unclutters the IOMMU top-level
 	  directory a bit.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl7jme4ACgkQK/BELZcB
 GuNNMw//U7AL3Qq6J8DqU+Ay+gIblxKUhWtYLVHad1+agSWmcbfy4E6iV8FqXLbP
 HnCSmA7ScgEMN+3GAve/WpWccMI3aeAgp4xI4MElz/6p4QeJXfNu9COrllif+OX7
 4fDpxXyd0fhKev4lPGZFRY8yGgvgP5ZHvDG0juoxi3bKCqiC2bkAga3itC9RPCQb
 8kBefKIb7/q+UUGGVppTvVIW0mrqWLQ1TcnfKf0hovU7yZs4i4RO+8br6Q5eNUcB
 Vb64vCV3qkQ/zPdr4vK6rvuZTPRMKkCgY4+MJr/g2/JQWuZxF1O+q+TsTYI1ISAS
 qNPRdxgNrZbSBDowg2QfQtPBHPpq3m4eNDeD+ewyQkrVt0/Eneg6Np0FG9j3tGAG
 +IS64r2E25O0tGtBIQ9Mi2TC68S0C7VtMbzx55zVcTGF0JH9T2YW4sSdRcTjVdW6
 WBFqu5fXEKk63ln3h/8JEP7zPWGp+Q3cuOChDvcmIMjCxQ84k5jOB5AIZppGIgJ9
 0nGf45t8YCvIXMbNKufYqjesJZOC2bd+Swi1MZXVlO/gSVv19O40UW+F1X0e7YOp
 MHOzsV44rE2posS/huHOLR4q0AQTdc9O1mywCCGDxNW8tlwIBHsLLJ8b9C9raIRn
 mZkq94QZQXta+WYtoGvbk6nHQ89FtBOOdEH2TSlEbvvYowpjZZE=
 =gX8z
 -----END PGP SIGNATURE-----

Merge tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu driver directory structure cleanup from Joerg Roedel:
 "Move the Intel and AMD IOMMU drivers into their own subdirectory.

  Both drivers consist of several files by now and giving them their own
  directory unclutters the IOMMU top-level directory a bit"

* tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Move Intel IOMMU driver into subdirectory
  iommu/amd: Move AMD IOMMU driver into subdirectory
2020-06-12 12:19:13 -07:00
Linus Torvalds
d2d5439df2 xen: branch for v5.8-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXuMTgwAKCRCAXGG7T9hj
 vmX0AQCR8jeUkcc3+TDDuCugfH1AsyIRWavSEP/slqnEVuPhiwEA/324aID1v28U
 CEsA7Iksf4nDGLEaC5I5Exshd15gQgY=
 =W5nI
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - several smaller cleanups

 - a fix for a Xen guest regression with CPU offlining

 - a small fix in the xen pvcalls backend driver

 - an update of MAINTAINERS

* tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
  xen/pci: Get rid of verbose_request and use dev_dbg() instead
  xenbus: Use dev_printk() when possible
  xen-pciback: Use dev_printk() when possible
  xen: enable BALLOON_MEMORY_HOTPLUG by default
  xen: expand BALLOON_MEMORY_HOTPLUG description
  xen/pvcalls: Make pvcalls_back_global static
  xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests
  xen-platform: Constify dev_pm_ops
  xen/pvcalls-back: test for errors when calling backend_connect()
2020-06-12 11:00:45 -07:00
Linus Torvalds
b791d1bdf9 The Kernel Concurrency Sanitizer (KCSAN)
KCSAN is a dynamic race detector, which relies on compile-time
 instrumentation, and uses a watchpoint-based sampling approach to detect
 races.
 
 The feature was under development for quite some time and has already found
 legitimate bugs.
 
 Unfortunately it comes with a limitation, which was only understood late in
 the development cycle:
 
   It requires an up to date CLANG-11 compiler
 
 CLANG-11 is not yet released (scheduled for June), but it's the only
 compiler today which handles the kernel requirements and especially the
 annotations of functions to exclude them from KCSAN instrumentation
 correctly.
 
 These annotations really need to work so that low level entry code and
 especially int3 text poke handling can be completely isolated.
 
 A detailed discussion of the requirements and compiler issues can be found
 here:
 
   https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/
 
 We came to the conclusion that trying to work around compiler limitations
 and bugs again would end up in a major trainwreck, so requiring a working
 compiler seemed to be the best choice.
 
 For Continous Integration purposes the compiler restriction is manageable
 and that's where most xxSAN reports come from.
 
 For a change this limitation might make GCC people actually look at their
 bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed'
 3 years ago with a half baken solution which 'solved' the reported issue
 but not the underlying problem.
 
 The KCSAN developers also ponder to use a GCC plugin to become independent,
 but that's not something which will show up in a few days.
 
 Blocking KCSAN until wide spread compiler support is available is not a
 really good alternative because the continuous growth of lockless
 optimizations in the kernel demands proper tooling support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7im98THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoQ3xD/9+q87OmwnyoRTs6O3GDDbWZYoJGolh
 rctDOAYW8RSS73Fiw23z8hKlLl9tJCya6/X8Q9qoonB1YeIEPPRVj5HJWAMUNEIs
 YgjlZJFmh+mnbP/KQFctm3AWpoX8kqt3ncqj6zG72oQ9qKui691BY/2NmGVSLxUV
 DqtUYSKmi51XEQtZuXRuHEf3zBxoyeD43DaSCdJAXd6f5O2X7tmrWDuazHVeKzHV
 lhijvkyBvGMWvPg0IBrXkkLmeOvS0++MTGm3o+L72XF6nWpzTkcV7N0E9GEDFg45
 zwcidRVKD5d/1DoU5Tos96rCJpBEGh/wimlu0z14mcZpNiJgRQH5rzVEO9Y14UcP
 KL9FgRrb5dFw7yfX2zRQ070OFJ4AEDBMK0o5Lbu/QO5KLkvFkqnuWlQfmmtZJWCW
 DTRw/FgUgU7lvyPjRrao6HBvwy+yTb0u9K5seCOTRkuepR9nPJs0710pFiBsNCfV
 RY3cyggNBipAzgBOgLxixnq9+rHt70ton6S8Gijxpvt0dGGfO8k0wuEhFtA4zKrQ
 6HGK+pidxnoVdEgyQZhS+qzMMkyiUL0FXdaGJ2IX+/DC+Ij1UrUPjZBn7v25M0hQ
 ESkvxWKCn7snH4/NJsNxqCV1zyEc3zAW/WvLJUc9I7H8zPwtVvKWPrKEMzrJJ5bA
 aneySilbRxBFUg==
 =iplm
 -----END PGP SIGNATURE-----

Merge tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
 "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
  which relies on compile-time instrumentation, and uses a
  watchpoint-based sampling approach to detect races.

  The feature was under development for quite some time and has already
  found legitimate bugs.

  Unfortunately it comes with a limitation, which was only understood
  late in the development cycle:

     It requires an up to date CLANG-11 compiler

  CLANG-11 is not yet released (scheduled for June), but it's the only
  compiler today which handles the kernel requirements and especially
  the annotations of functions to exclude them from KCSAN
  instrumentation correctly.

  These annotations really need to work so that low level entry code and
  especially int3 text poke handling can be completely isolated.

  A detailed discussion of the requirements and compiler issues can be
  found here:

    https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/

  We came to the conclusion that trying to work around compiler
  limitations and bugs again would end up in a major trainwreck, so
  requiring a working compiler seemed to be the best choice.

  For Continous Integration purposes the compiler restriction is
  manageable and that's where most xxSAN reports come from.

  For a change this limitation might make GCC people actually look at
  their bugs. Some issues with CSAN in GCC are 7 years old and one has
  been 'fixed' 3 years ago with a half baken solution which 'solved' the
  reported issue but not the underlying problem.

  The KCSAN developers also ponder to use a GCC plugin to become
  independent, but that's not something which will show up in a few
  days.

  Blocking KCSAN until wide spread compiler support is available is not
  a really good alternative because the continuous growth of lockless
  optimizations in the kernel demands proper tooling support"

* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
  compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
  compiler.h: Move function attributes to compiler_types.h
  compiler.h: Avoid nested statement expression in data_race()
  compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
  kcsan: Update Documentation to change supported compilers
  kcsan: Remove 'noinline' from __no_kcsan_or_inline
  kcsan: Pass option tsan-instrument-read-before-write to Clang
  kcsan: Support distinguishing volatile accesses
  kcsan: Restrict supported compilers
  kcsan: Avoid inserting __tsan_func_entry/exit if possible
  ubsan, kcsan: Don't combine sanitizer with kcov on clang
  objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
  kcsan: Add __kcsan_{enable,disable}_current() variants
  checkpatch: Warn about data_race() without comment
  kcsan: Use GFP_ATOMIC under spin lock
  Improve KCSAN documentation a bit
  kcsan: Make reporting aware of KCSAN tests
  kcsan: Fix function matching in report
  kcsan: Change data_race() to no longer require marking racing accesses
  kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
  ...
2020-06-11 18:55:43 -07:00
Linus Torvalds
2dca74a40e - qcom :
new controller driver for IPCC
      reorg the of_device data
      add support for ipq6018 platform
 - spreadtrum:
      new sprd controller driver
 - imx:
      implement suspend/resume PM support
 - Misc :
      make pcc driver struct as static
      fix return value in imx_mu_scu
      disable clock before bailout in imx probe
      remove duplicate error mssg in zynqmp probe
      fix header size in imx.scu
      check for null instead of is-err in zynqmp
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAl7hrXUACgkQf9lkf8eY
 P5U+9g//TWG3xf8pTEDkKq5LDQbq2K58GeplYbS1M0dfF6kMQsl9jdPMh7F/8kdO
 fBE1yAeVQrv+uiL7TNdlM4AyfmFDO2if8snhvvLZD61LfTBzAQGfm48oz3zB7n3r
 f9pyrnCXvjYutQ4TpNT3WBOuuJSNLHcyfmJwhkpdLQYQiSywOhP+LAKrw3LMwaIk
 0/5LkixC1IuPOdShTRJnkR2WA4fZ0jhUFbZmP0OwmZZc4I0V/CsQzeh7DqZyCnak
 zcOaUg8bfOPGlPQVo4MHJpFlC/irIjPxD/TXPVftwHHB2Zz+g0u2uSC9mZvKdszW
 vUDGtywP64arcsyuCuDC1C/WVww30WiPhIT08MInbbNtsdMaPPdVJrnyQzY53xqo
 ZfFDZJ+F9K11xi2xU5EUh5KwWV3yQvx7Y2c5Y1G67Vu73jryvR5aPkCCCdRgL9Pv
 qe3ux5iMWK5XrnKm7UJ6kUxcEyhiP/ReKmozsnYpQzRzDlG3v8Gjghr6/tTjEV60
 At/f5zPn1GlX8kkkAakgORTHQ94MfsMrYh1CMY49P/ICntGKM3WYv9YGv1sDhxbn
 ih2G5VzngQtffnAQLyPsTGvuRLxFL1TEoVpI7/1OQq/ReksFxjN58X+Vc0W9PA7a
 mzhZROc/4KatjQNYx3YPejYWL9e9WqGecKRzO4TaxiDTElhgWvE=
 =FpYp
 -----END PGP SIGNATURE-----

Merge tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:
 "qcom:
   - new controller driver for IPCC
   - reorg the of_device data
   - add support for ipq6018 platform

  spreadtrum:
   - new sprd controller driver

  imx:
   - implement suspend/resume PM support

  misc:
   - make pcc driver struct static
   - fix return value in imx_mu_scu
   - disable clock before bailout in imx probe
   - remove duplicate error mssg in zynqmp probe
   - fix header size in imx.scu
   - check for null instead of is-err in zynqmp"

* tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom: Add ipq6018 apcs compatible
  mailbox: qcom: Add clock driver name in apcs mailbox driver data
  dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
  mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag
  mailbox: imx: Add runtime PM callback to handle MU clocks
  mailbox: imx: Add context save/restore for suspend/resume
  MAINTAINERS: Add entry for Qualcomm IPCC driver
  mailbox: Add support for Qualcomm IPCC
  dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
  mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
  mailbox: imx-mailbox: fix scu msg header size check
  mailbox: sprd: Add Spreadtrum mailbox driver
  dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
  mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe()
  mailbox: imx: Disable the clock on devm_mbox_controller_register() failure
  mailbox: imx: Fix return in imx_mu_scu_xlate()
  mailbox: imx: Support runtime PM
  mailbox: pcc: make pcc_mbox_driver static
2020-06-11 12:42:14 -07:00
Thomas Gleixner
37d1a04b13 Rebase locking/kcsan to locking/urgent
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.

Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11 20:02:46 +02:00
Linus Torvalds
49f13b0921 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...
2020-06-10 13:51:47 -07:00
Linus Torvalds
09102704c6 virtio: features, fixes
virtio-mem
 doorbell mapping for vdpa
 config interrupt support in ifc
 fixes all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7fZ6APHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpkDoIAMcBcQx5su1iuX7vT35xzUWZO478eAf1jOMZ
 7KxKUVBeztkcxVFUlRVRu9MR6wOzwHils+1HD6025775Smr5M6x3aJxR6xOORaBj
 RoU6OVGkpDvbzsxlhW+xhONz4O7/RkveKJPCwzGjqHrsFeh92lkfTqroz/EuNpw+
 LZsO0+DhdUf123HbwHQp5lxW8EjyrRabgeZZg/D9VLPhoCP88vCjRhBXU2GPuaUl
 /UNXsQafn4xUgrxPaoN5f4Phn/P46NNrbZ1jmlkw/z/3QhF/DhktGXGaZsIHDCN/
 vicUii0or5QLeBsZpMbKko/BIe2xWHxFjkMRhMOMZOfcBb6sMBI=
 =auUa
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - virtio-mem: paravirtualized memory hotplug

 - support doorbell mapping for vdpa

 - config interrupt support in ifc

 - fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
  vhost/test: fix up after API change
  virtio_mem: convert device block size into 64bit
  virtio-mem: drop unnecessary initialization
  ifcvf: implement config interrupt in IFCVF
  vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
  vhost_vdpa: Support config interrupt in vdpa
  ifcvf: ignore continuous setting same status value
  virtio-mem: Don't rely on implicit compiler padding for requests
  virtio-mem: Try to unplug the complete online memory block first
  virtio-mem: Use -ETXTBSY as error code if the device is busy
  virtio-mem: Unplug subblocks right-to-left
  virtio-mem: Drop manual check for already present memory
  virtio-mem: Add parent resource for all added "System RAM"
  virtio-mem: Better retry handling
  virtio-mem: Offline and remove completely unplugged memory blocks
  mm/memory_hotplug: Introduce offline_and_remove_memory()
  virtio-mem: Allow to offline partially unplugged memory blocks
  mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
  virtio-mem: Paravirtualized memory hotunplug part 2
  virtio-mem: Paravirtualized memory hotunplug part 1
  ...
2020-06-10 13:42:09 -07:00
Linus Torvalds
6f51ab9440 MTD core changes:
* partition parser: Support MTD names containing one or more colons.
 * mtdblock: clear cache_state to avoid writing to bad blocks repeatedly.
 
 Raw NAND core changes:
 
 * Stop using nand_release(), patched all drivers.
 * Give more information about the ECC weakness when not matching the
   chip's requirement.
 * MAINTAINERS updates.
 * Support emulated SLC mode on MLC NANDs.
 * Support "constrained" controllers, adapt the core and ONFI/JEDEC
   table parsing and Micron's code.
 * Take check_only into account.
 * Add an invalid ECC mode to discriminate with valid ones.
 * Return an enum from of_get_nand_ecc_algo().
 * Drop OOB_FIRST placement scheme.
 * Introduce nand_extract_bits().
 * Ensure a consistent bitflips numbering.
 * BCH lib:
   - Allow easy bit swapping.
   - Rework a little bit the exported function names.
 * Fix nand_gpio_waitrdy().
 * Propage CS selection to sub operations.
 * Add a NAND_NO_BBM_QUIRK flag.
 * Give the possibility to verify a read operation is supported.
 * Add a helper to check supported operations.
 * Avoid indirect access to ->data_buf().
 * Rename the use_bufpoi variables.
 * Fix comments about the use of bufpoi.
 * Rename a NAND chip option.
 * Reorder the nand_chip->options flags.
 * Translate obscure bitfields into readable macros.
 * Timings:
   - Fix default values.
   - Add mode information to the timings structure.
 
 Raw NAND controller driver changes:
 
 * Fixed many error paths.
 * Arasan
   - New driver
 * Au1550nd:
   - Various cleanups
   - Migration to ->exec_op()
 * brcmnand:
   - Misc cleanup.
   - Support v2.1-v2.2 controllers.
   - Remove unused including <linux/version.h>.
   - Correctly verify erased pages.
   - Fix Hamming OOB layout.
 * Cadence
   - Make cadence_nand_attach_chip static.
 * Cafe:
   - Set the NAND_NO_BBM_QUIRK flag
 * cmx270:
   - Remove this controller driver.
 * cs553x:
   - Misc cleanup
   - Migration to ->exec_op()
 * Davinci:
   - Misc cleanup.
   - Migration to ->exec_op()
 * Denali:
   - Add more delays before latching incoming data
 * Diskonchip:
    - Misc cleanup
    - Migration to ->exec_op()
 * Fsmc:
   - Change to non-atomic bit operations.
 * GPMI:
   - Use nand_extract_bits()
   - Fix runtime PM imbalance.
 * Ingenic:
   - Migration to exec_op()
   - Fix the RB gpio active-high property on qi, lb60
   - Make qi_lb60_ooblayout_ops static.
 * Marvell:
    - Misc cleanup and small fixes
 * Nandsim:
   - Fix the error paths, driver wide.
 * Omap_elm:
   - Fix runtime PM imbalance.
 * STM32_FMC2:
   - Misc cleanups (error cases, comments, timeout valus, cosmetic
     changes).
 
 SPI NOR core changes:
 
 * Add, update support and fix few flashes.
 * Prepare BFPT parsing for JESD216 rev D.
 * Kernel doc fixes.
 
 CFI changes:
 
 * Support the absence of protection registers for Intel CFI flashes.
 * Replace zero-length array with flexible-arrays.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAl7f8msWHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wXhlEADO3dfrWS9bsbZokuMppHlOTAsm
 d0hPexu0ztRYr2qWgXScENtrcJ/0ygDPxEQxwIiWYAqwFn6yOBbum+tOo25edbEH
 hGpkV5551vc48vD55nvxdoyWiJAgx93jVmfXU/Ad8EBDV4wGTBwzJJvZ8bxovUIl
 Ccs9p8KU/Z5c7yNhYtLOJChU3gfMS0WS5iQakSnnT82TFJIdC8d8Y+bjupRfvHbz
 ZkEC44Y+QcvSX6C2PJ2U9ScBf6r6WZkHmpOef8UzrxdLRvnhU16u9yRlepsm2D+x
 KycQ81KPBhagLI+9AWGZQYma5GH0z+40LmhxR6YBS0ipS2lAc1wM904KB8RGohfl
 SY4EYQSyx2/42bLEgR823rCfIIrzzNvjwnWdcZik2p2IWsocpzhdW2Fe3eJ7ULUe
 9toQMg8JObawyKw7vRJtdiiX/OsNNv53FJsRu6rHkq3kgLXcmAUQYMh02LQFAkD6
 gT8W8wmseZixI6mnG7tV2KHtRU70xWTTwJgFp5FvvBAP0p7KfbIlgJ0XrzQor2vB
 3Jhb7e2DrOfu2RatZ12bmQpvpoU1Jv1U81UNnwsNpXawCPuRUYG3KCt+hjjr7HiV
 ++7YZ01pQ1GQ/pgcprwwKcpw5iTah0uXUEnE6pVbyX7hxg+OBgsWh8SK9MZMUioM
 3yUGbotWAu2j6uM46g==
 =2M9Y
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - partition parser: Support MTD names containing one or more colons.
   - mtdblock: clear cache_state to avoid writing to bad blocks
     repeatedly.

  Raw NAND core changes:
   - Stop using nand_release(), patched all drivers.
   - Give more information about the ECC weakness when not matching the
     chip's requirement.
   - MAINTAINERS updates.
   - Support emulated SLC mode on MLC NANDs.
   - Support "constrained" controllers, adapt the core and ONFI/JEDEC
     table parsing and Micron's code.
   - Take check_only into account.
   - Add an invalid ECC mode to discriminate with valid ones.
   - Return an enum from of_get_nand_ecc_algo().
   - Drop OOB_FIRST placement scheme.
   - Introduce nand_extract_bits().
   - Ensure a consistent bitflips numbering.
   - BCH lib:
      - Allow easy bit swapping.
      - Rework a little bit the exported function names.
   - Fix nand_gpio_waitrdy().
   - Propage CS selection to sub operations.
   - Add a NAND_NO_BBM_QUIRK flag.
   - Give the possibility to verify a read operation is supported.
   - Add a helper to check supported operations.
   - Avoid indirect access to ->data_buf().
   - Rename the use_bufpoi variables.
   - Fix comments about the use of bufpoi.
   - Rename a NAND chip option.
   - Reorder the nand_chip->options flags.
   - Translate obscure bitfields into readable macros.
   - Timings:
      - Fix default values.
      - Add mode information to the timings structure.

  Raw NAND controller driver changes:
   - Fixed many error paths.
   - Arasan
      - New driver
   - Au1550nd:
      - Various cleanups
      - Migration to ->exec_op()
   - brcmnand:
      - Misc cleanup.
      - Support v2.1-v2.2 controllers.
      - Remove unused including <linux/version.h>.
      - Correctly verify erased pages.
      - Fix Hamming OOB layout.
   - Cadence
      - Make cadence_nand_attach_chip static.
   - Cafe:
      - Set the NAND_NO_BBM_QUIRK flag
   - cmx270:
      - Remove this controller driver.
   - cs553x:
      - Misc cleanup
      - Migration to ->exec_op()
   - Davinci:
      - Misc cleanup.
      - Migration to ->exec_op()
   - Denali:
      - Add more delays before latching incoming data
   - Diskonchip:
      - Misc cleanup
      - Migration to ->exec_op()
   - Fsmc:
      - Change to non-atomic bit operations.
   - GPMI:
      - Use nand_extract_bits()
      - Fix runtime PM imbalance.
   - Ingenic:
      - Migration to exec_op()
      - Fix the RB gpio active-high property on qi, lb60
      - Make qi_lb60_ooblayout_ops static.
   - Marvell:
      - Misc cleanup and small fixes
   - Nandsim:
      - Fix the error paths, driver wide.
   - Omap_elm:
      - Fix runtime PM imbalance.
   - STM32_FMC2:
      - Misc cleanups (error cases, comments, timeout valus, cosmetic
        changes).

  SPI NOR core changes:
   - Add, update support and fix few flashes.
   - Prepare BFPT parsing for JESD216 rev D.
   - Kernel doc fixes.

  CFI changes:
   - Support the absence of protection registers for Intel CFI flashes.
   - Replace zero-length array with flexible-arrays"

* tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits)
  mtd: clear cache_state to avoid writing to bad blocks repeatedly
  mtd: parser: cmdline: Support MTD names containing one or more colons
  mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'
  mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
  mtd: rawnand: Return an enum from of_get_nand_ecc_algo()
  mtd: rawnand: Drop OOB_FIRST placement scheme
  mtd: rawnand: Avoid a typedef
  mtd: Fix typo in mtd_ooblayout_set_databytes() description
  mtd: rawnand: Stop using nand_release()
  mtd: rawnand: nandsim: Reorganize ns_cleanup_module()
  mtd: rawnand: nandsim: Rename a label in ns_init_module()
  mtd: rawnand: nandsim: Manage lists on error in ns_init_module()
  mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup()
  mtd: rawnand: nandsim: Free erase_block_wear on error
  mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object
  mtd: rawnand: nandsim: Stop using nand_release()
  mtd: rawnand: nandsim: Free the partition names in ns_free()
  mtd: rawnand: nandsim: Free the allocated device on error in ns_init()
  mtd: rawnand: nandsim: Free partition names on error in ns_init()
  mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths
  ...
2020-06-10 13:15:17 -07:00
Linus Torvalds
6f630784cc This time around we have 4 lines of diff in the core framework, removing a
function that isn't used anymore. Otherwise the main new thing for the common
 clk framework is that it is selectable in the Kconfig language now. Hopefully
 this will let clk drivers and clk consumers be testable on more than the
 architectures that support the clk framework. The goal is to introduce some
 Kunit tests for the framework.
 
 Outside of the core framework we have the usual set of various driver updates
 and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the
 largest addition this time around in terms of lines of code. After that the x86
 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or
 upcoming SoCs. After that the dirstat shows the usual suspects working on their
 SoC support by fixing minor bugs, correcting data and converting some of their
 DT bindings to YAML.
 
 Core:
  - Allow the COMMON_CLK config to be selectable
 
 New Drivers:
  - Clk driver for Baikal-T1 SoCs
  - Mediatek MT6765 clock support
  - Support for Intel Agilex clks
  - Add support for X1830 and X1000 Ingenic SoC clk controllers
  - Add support for the new Renesas RZ/G1H (R8A7742) SoC
  - Add support for Qualcomm's MSM8939 Generic Clock Controller
 
 Updates:
  - Support IDT VersaClock 5P49V5925
  - Bunch of updates for HSDK clock generation unit (CGU) driver
  - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
  - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
  - Enable supply regulators for GPU gdscs on Qualcomm SoCs
  - Add support for Si5342, Si5344 and Si5345 chips
  - Support custom flags in Xilinx zynq firmware
  - Various small fixes to the Xilinx clk driver
  - A single minor rounding fix for the legacy Allwinner clock support
  - A few patches from Abel Vesa as preparation of adding audiomix clock support
    on i.MX
  - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3
    drivers
  - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on
    aarch64 hardware
  - A series from Peng Fan to improve i.MX8M clock drivers, using composite
    clock for core and bus clk slice
  - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined
    bit rates
  - A couple changes for EMC frequency scaling on Tegra210
  - Support for CPU frequency scaling on Tegra20/Tegra30
  - New clk gate for CSI test pattern generator on Tegra210
  - Regression fixes for Samsung exynos542x and exynos5433 SoCs
  - Use of fallthrough; attribute for Samsung s3c24xx
  - Updates and fixup HDMI and video clocks on Meson8b
  - Fixup reset polarity on Meson8b
  - Fix GPU glitch free mux switch on Meson gx and g12
  - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2
  - Two more conversions of Renesas DT bindings to json-schema
  - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl7gEUgRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUemxAAlQKzx0yMS3yx5twJ4RSFUvf3hf4OqyPp
 O46soqADk+l69Z4SUUBsMjt8el5Sqmm4d1j1Gpfmgp3ZlumHCQK+qGYp48IXbwRP
 Jlo5sKNlNL6yhCd+ixPn4j7W/HbpGs4cciWOXkGQtYEGjhHm3Wllhd9MqpL2YjLx
 gZW60NqWtOe1XeB4ILyYQGisNwAGDi5XuBeNvxG12H/LaGC1mwtBX9yoNAehr9bF
 peJ2XnO02zFo73OCyzIOkw1uY4u7ZtwPdHGhymoGeVlcBWO6KwKesNkHnji/Grlv
 wMbsGLoRV/i3PL3q5kZIDigo8sqZ9RUG+9piRAoiLM5AgkSypw3/q9T+ujTfZp8t
 kgvFha6bLZz31UFmr4lBJPTT5Q/hAoe1W6RB6HZkx7XNqUpsAS04SwkQztAqkJqZ
 9zlYJrXgLlP5qcNllJ6zvUWkMqtmIKW4ZkjYe4u84yk5Co7bX8DCYa+QOKCz+pV4
 IbjRT62OrX2ZlXJYwkLb4m1nhZ7tBzhzIRP1umL0ukhxdomK6ofSNPzbBF9+t1eR
 /ai2/Ch6L6WIwDINEp+chO67/dJaj5W3WNqGMCmVt37myW1kBjH3eg0YG4cp7NYZ
 /jSjdWczQy/8BgY5V1009MRXI4uyazQxBw+apDcIGezamOKBmuwjBcvkf1D0mL2x
 Y6OclK5ljsw=
 =nuG5
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...
2020-06-10 11:42:19 -07:00
Linus Torvalds
3a2a875174 power supply and reset changes for the v5.8 series
kobject:
  * Increase number of allowed uevent variables
 
 power-supply core:
  * Add power-supply type in uevent
  * Cleanup property handling in core
  * Make property and usb_type pointers const
  * Convert core power-supply DT binding to YAML
  * Cleanup HWMON code
  * Add new health status "calibration required"
  * Add new properties for manufacture date and
    capacity error margin
 
 battery drivers:
  * new cw2015 battery driver used by pine64 Pinebook Pro laptop
  * axp22: blacklist on Meegopad T02
  * sc27xx: support current/voltage reading
  * max17042: support time-to-empty reading
  * simple-battery: add more battery parameters
  * bq27xxx: convert DT binding document to YAML
  * sbs-battery: add TI BQ20Z65 support, fix technology property, convert
                 DT binding to YAML, add option to disable charger
 		broadcasts, add new properties: manufacture date,
 		capacity error margin, average current, charge current
 		and voltage and support calibration required health
 		status
  * misc. fixes
 
 charger drivers:
  * bq25890: cleanup, implement charge type, precharge current and input
             current limiting properties
  * bd70528: use new linear range helper library
  * bd99954: new charger driver
  * mp2629: new charger driver
  * misc. fixes
 
 reboot drivers:
  * oxnas-restart: introduce new driver
  * syscon-reboot: convert DT binding to YAML, add parent syscon device support
  * misc. fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl7a2L0ACgkQ2O7X88g7
 +poAIg//caN2sHqOFEsukXWe1oft/X0IQeGNmlCnj55l1zGJ/x03Yn0GeKb0FZgM
 go+sfMaM/a6NNdmKhseLIsYFlhVBa2E7qW1nvaxgt66JKS+GXAHfE8LWVwazDJex
 rq0esXuegsqFdbCUth81YLk2H+0qwnhVVv/Urvv1RaE/woeFHAHL1cYfcFa+YDXm
 XRDT0W73YozslFkMnZMLBLyQzad3yVnNcnRYF3Dx0CMnUsjGfPjBlyk4RLPTcgUk
 8ChTvCcHRG7IhEtF0a1HUr3UjCy9rjwiqWIobQltnbEYImxY0LWkCVVr1EsNjeyr
 ikl3c4JfwmdlVCBCSPn294mPlGKu8DNBMLN1IgAuJHKW1GuQxd0Tcbd9OwF6VlVj
 WTFWp2GcoIjKQtOWKDeCqby+hoWhgclxTHUudo7FGTT0xBP9OWTKWDpDL18cZWd8
 dNCFMEI6MDMRtwL8+3ilLcnvSoMzyZ94TZmwii9toD3xSI7TMn7oVRuOlq1TkOEw
 ZuPS3QP6jBHm8NN9JEhLbrwradP+R8qpE/jpsnWiBDR6Jt7xx4W7W0xupq4GdHAl
 u0Lbh38/0bkTijeo9xoPe03KsSBV8HOr9Lf/QVW3zLcYcGKW17j8QTkes3a0bOs0
 DZHVCFeXuWNFa/tJxe6c+J+NsroLucTMwA3lBmlZhI/TPsG2vb8=
 =He9L
 -----END PGP SIGNATURE-----

Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "This time there are lots of changes. Quite a few changes to the core,
  lots of driver changes and one change to kobject core (with Ack from
  Greg).

  Summary:

  kobject:
   - Increase number of allowed uevent variables

  power-supply core:
   - Add power-supply type in uevent
   - Cleanup property handling in core
   - Make property and usb_type pointers const
   - Convert core power-supply DT binding to YAML
   - Cleanup HWMON code
   - Add new health status "calibration required"
   - Add new properties for manufacture date and capacity error margin

  battery drivers:
   - new cw2015 battery driver used by pine64 Pinebook Pro laptop
   - axp22: blacklist on Meegopad T02
   - sc27xx: support current/voltage reading
   - max17042: support time-to-empty reading
   - simple-battery: add more battery parameters
   - bq27xxx: convert DT binding document to YAML
   - sbs-battery: add TI BQ20Z65 support, fix technology property,
         convert DT binding to YAML, add option to disable charger
         broadcasts, add new properties: manufacture date, capacity
         error margin, average current, charge current and voltage and
         support calibration required health status
   - misc fixes

  charger drivers:
   - bq25890: cleanup, implement charge type, precharge current and
         input current limiting properties
   - bd70528: use new linear range helper library
   - bd99954: new charger driver
   - mp2629: new charger driver
   - misc fixes

  reboot drivers:
   - oxnas-restart: introduce new driver
   - syscon-reboot: convert DT binding to YAML, add parent syscon device
         support
   - misc fixes"

* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
  power: supply: cw2015: Attach OF ID table to the driver
  power: reset: gpio-poweroff: add missing '\n' in dev_err()
  Revert "power: supply: sbs-battery: simplify read_read_string_data"
  Revert "power: supply: sbs-battery: add PEC support"
  dt-bindings: power: sbs-battery: Convert to yaml
  power: supply: sbs-battery: constify power-supply property array
  power: supply: sbs-battery: switch to i2c's probe_new
  power: supply: sbs-battery: switch from of_property_* to device_property_*
  power: supply: sbs-battery: add ability to disable charger broadcasts
  power: supply: sbs-battery: fix idle battery status
  power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
  power: supply: sbs-battery: add MANUFACTURE_DATE support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
  power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
  power: supply: sbs-battery: add PEC support
  power: supply: sbs-battery: simplify read_read_string_data
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
  power: supply: sbs-battery: Add TI BQ20Z65 support
  power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
  ...
2020-06-10 11:28:35 -07:00
Joerg Roedel
672cf6df9b iommu/vt-d: Move Intel IOMMU driver into subdirectory
Move all files related to the Intel IOMMU driver into its own
subdirectory.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200609130303.26974-3-joro@8bytes.org
2020-06-10 17:46:43 +02:00
Joerg Roedel
ad8694bac4 iommu/amd: Move AMD IOMMU driver into subdirectory
Move all files related to the AMD IOMMU driver into its own
subdirectory.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200609130303.26974-2-joro@8bytes.org
2020-06-10 17:46:42 +02:00
Tali Perry
cb30141476 MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
Add maintainer for Nuvoton NPCM BMC
I2C controller driver.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-06-10 17:30:48 +02:00
Deep Shah
a952f64d14 MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
Thomas Hellstrom will be handing over VMware's maintainership of these
interfaces to Deep Shah.

Signed-off-by: Deep Shah <sdeep@vmware.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200416234520.GA1700@prme-mon-cfl-mlw-07
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-06-09 07:57:00 -05:00
Linus Torvalds
abfbb29297 remoteproc updates for v5.8
This introduces device managed versions of functions used to register
 remoteproc devices, add support for remoteproc driver specific resource
 control, enables remoteproc drivers to specify ELF class and machine for
 coredumps. It integrates pm_runtime in the core for keeping resources
 active while the remote is booted and holds a wake source while
 recoverying a remote processor after a firmware crash.
 
 It refactors the remoteproc device's allocation path to simplify the
 logic, fix a few cleanup bugs and to not clone const strings onto the
 heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
 zero-length array is replaced with flexible-array.
 
 A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
 SM8250 gains support for audio, compute and sensor remoteprocs and the
 Qualcomm SC7180 modem support is cleaned up and improved.
 
 The Qualcomm glink subsystem-restart driver is merged into the main
 glink driver, the Qualcomm sysmon driver is extended to properly notify
 remote processors about all other remote processors' state transitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7egk0bHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FQnwQAM781m7BqSKdtbH0OzGB
 K4jGX/IkWCEluXx/RuDbPFV0mx/yLOfsrSzBBYnnTl+CXTgSLFtImRvwx5BFbnAl
 bRNbSlw1GLiV/w+HceIx1iKTELnkHKp4TT3zUmR+dZ+7pT1dhWXzHIjyjJPC1c7R
 L8qg3qlOrM620y3OJNUo57/20Tg9WN6kBKdaeyJKjmBsENrw6wggY30ijqhMgCYr
 9LgStPjtuSGgf4j55+BeTskVSnOvuun5NlVpRUVTo+ZDKTZAyO/8TKM+yWffAHc5
 7WkK0z9E3lhwdNPLif+dSIvhLjiyKR2yJf5KP7n9mFhA1tRVqNXnJqMCnAnwVvzT
 IpL1INYbirRwPfayhCsUSwKDTKkckKP9I/vZ7WKWJD9SWcc4eGWIifNDNGkMQ6qV
 7S0+6AyCANBltRPKTl6zwXSrrHuBUNkH3r9gddT5tPJu7Klh+fjKEywpsXkUd+IY
 Xo1nuT+mYrUgif0KTh656EK6YM5dFuVnZqOszzgiVUrdKeHKYBsUjWD7vS7DBeLe
 pLiDfo0qMb/J0sPptMt+0Rg/b/Nt1YiddW3ZlnVmWRCRjIQRJt9LQZcQoVhVv1Sa
 OQkhlvFTqIEFJfLtvp83zvL5WngxVM5Dq6mDiesAjZUhyode9ZtOGxr9zyhA4ApU
 njqp4n16OxcXaqjwp+k6eK8L
 =4k54
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This introduces device managed versions of functions used to register
  remoteproc devices, add support for remoteproc driver specific
  resource control, enables remoteproc drivers to specify ELF class and
  machine for coredumps. It integrates pm_runtime in the core for
  keeping resources active while the remote is booted and holds a wake
  source while recoverying a remote processor after a firmware crash.

  It refactors the remoteproc device's allocation path to simplify the
  logic, fix a few cleanup bugs and to not clone const strings onto the
  heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
  zero-length array is replaced with flexible-array.

  A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
  SM8250 gains support for audio, compute and sensor remoteprocs and the
  Qualcomm SC7180 modem support is cleaned up and improved.

  The Qualcomm glink subsystem-restart driver is merged into the main
  glink driver, the Qualcomm sysmon driver is extended to properly
  notify remote processors about all other remote processors' state
  transitions"

* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
  remoteproc: Fix an error code in devm_rproc_alloc()
  MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
  remoteproc: ingenic: Added remoteproc driver
  remoteproc: Add support for runtime PM
  dt-bindings: Document JZ47xx VPU auxiliary processor
  remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
  remoteproc: Fix and restore the parenting hierarchy for vdev
  remoteproc: Fall back to using parent memory pool if no dedicated available
  remoteproc: Replace zero-length array with flexible-array
  remoteproc: wcss: add support for rpmsg communication
  remoteproc: core: Prevent system suspend during remoteproc recovery
  remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
  remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
  remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
  dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
  remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
  dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
  remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
  dt-bindings: remoteproc: qcom: Use memory-region to reference memory
  remoteproc: qcom: pas: Add SC7180 Modem support
  ...
2020-06-08 13:01:08 -07:00
Linus Torvalds
ca687877e0 Changes in gfs2:
- An iopen glock locking scheme rework that speeds up deletes of
   inodes accessed from multiple nodes.
 - Various bug fixes and debugging improvements.
 - Convert gfs2-glocks.txt to ReST.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAl7eYjMUHGFncnVlbmJh
 QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTr/9g//cJ6jgiD/+qzh0VzougVksVZIduAl
 RMB+kldOjBS2ORbyYM87Jm1tdyakgZuFO91XlSwChWRdC3Y2mqdaJIEE/kATqfY9
 7Frlw++SyFKLvIf04kDYGk2hXX+umXXYFfrIiKb0tzDSGkPRaARUb3RM4TRvlSDP
 /U0JlYA/4aXMUge+VpYsbpSGeqHNfEzmcmCyPXGmZYyh1MZ/RocMZFYEsP9NH82J
 l07fxowUd10LJPEmBajzjD2NmEvjdvF4gBCOfJVNIfOzCj0CwXL3vmtu1SUNOKr+
 em266EWZF89eOcvfdtE6xF0w81oCAK43wYRjIODSgI9JCLXGiOYmlWZVwZoqu5iy
 2GQDhj/taq3ObuVqjR5n6GYuqMoJ+D0LSD13qccDALq/Bdy4lq9TMLSdDbkrVIM/
 8BVn0nI5MzUlTV3mq6uxhU0HqtYDwUEiHWURWw6bYRug5OvQy3nbg/XZptYlnD87
 XQccE4ErjlgSHLiYx1YckFz/GG6ytrRAKl9bGMkZ0u2+XmDsH+iJJgLcaXCPUP9h
 /hhYagKI55UBDer7we4tppbu+gnJrg3PXlgImf53iMc7ia0KQHd+TfSIFkGPuydI
 aEKKhIQzje23JayMbPRnwPbNlw9zU1loPi7hPS3rCpDY+w8oawpFyIieEOcxJyEt
 pYkOt4BQi9LvpGc=
 =PsCY
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Andreas Gruenbacher:

 - An iopen glock locking scheme rework that speeds up deletes of inodes
   accessed from multiple nodes

 - Various bug fixes and debugging improvements

 - Convert gfs2-glocks.txt to ReST

* tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: fix use-after-free on transaction ail lists
  gfs2: new slab for transactions
  gfs2: initialize transaction tr_ailX_lists earlier
  gfs2: Smarter iopen glock waiting
  gfs2: Wake up when setting GLF_DEMOTE
  gfs2: Check inode generation number in delete_work_func
  gfs2: Move inode generation number check into gfs2_inode_lookup
  gfs2: Minor gfs2_lookup_by_inum cleanup
  gfs2: Try harder to delete inodes locally
  gfs2: Give up the iopen glock on contention
  gfs2: Turn gl_delete into a delayed work
  gfs2: Keep track of deleted inode generations in LVBs
  gfs2: Allow ASPACE glocks to also have an lvb
  gfs2: instrumentation wrt log_flush stuck
  gfs2: introduce new gfs2_glock_assert_withdraw
  gfs2: print mapping->nrpages in glock dump for address space glocks
  gfs2: Only do glock put in gfs2_create_inode for free inodes
  gfs2: Allow lock_nolock mount to specify jid=X
  gfs2: Don't ignore inode write errors during inode_go_sync
  docs: filesystems: convert gfs2-glocks.txt to ReST
2020-06-08 12:47:09 -07:00
Linus Torvalds
23fc02e36e s390 updates for the 5.8 merge window
- Add support for multi-function devices in pci code.
 
 - Enable PF-VF linking for architectures using the
   pdev->no_vf_scan flag (currently just s390).
 
 - Add reipl from NVMe support.
 
 - Get rid of critical section cleanup in entry.S.
 
 - Refactor PNSO CHSC (perform network subchannel operation) in cio
   and qeth.
 
 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.
 
 - Align ioremap() with generic code.
 
 - Accept requests without the prefetch bit set in vfio-ccw.
 
 - Enable path handling via two new regions in vfio-ccw.
 
 - Other small fixes and improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
 FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
 EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
 3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
 r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
 utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
 RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
 =VhXR
 -----END PGP SIGNATURE-----

Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for multi-function devices in pci code.

 - Enable PF-VF linking for architectures using the pdev->no_vf_scan
   flag (currently just s390).

 - Add reipl from NVMe support.

 - Get rid of critical section cleanup in entry.S.

 - Refactor PNSO CHSC (perform network subchannel operation) in cio and
   qeth.

 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.

 - Align ioremap() with generic code.

 - Accept requests without the prefetch bit set in vfio-ccw.

 - Enable path handling via two new regions in vfio-ccw.

 - Other small fixes and improvements all over the code.

* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
  vfio-ccw: make vfio_ccw_regops variables declarations static
  vfio-ccw: Add trace for CRW event
  vfio-ccw: Wire up the CRW irq and CRW region
  vfio-ccw: Introduce a new CRW region
  vfio-ccw: Refactor IRQ handlers
  vfio-ccw: Introduce a new schib region
  vfio-ccw: Refactor the unregister of the async regions
  vfio-ccw: Register a chp_event callback for vfio-ccw
  vfio-ccw: Introduce new helper functions to free/destroy regions
  vfio-ccw: document possible errors
  vfio-ccw: Enable transparent CCW IPL from DASD
  s390/pci: Log new handle in clp_disable_fh()
  s390/cio, s390/qeth: cleanup PNSO CHSC
  s390/qdio: remove q->first_to_kick
  s390/qdio: fix up qdio_start_irq() kerneldoc
  s390: remove critical section cleanup from entry.S
  s390: add machine check SIGP
  s390/pci: ioremap() align with generic code
  s390/ap: introduce new ap function ap_get_qdev()
  Documentation/s390: Update / remove developerWorks web links
  ...
2020-06-08 12:05:31 -07:00
Linus Torvalds
cf0c97f148 This is the bulk of pin control changes for the v5.8
kernel cycle.
 
 New drivers:
 
 - Intel Jasper Lake support.
 
 - NXP Freescale i.MX8DXL support.
 
 - Qualcomm SM8250 support.
 
 - Renesas R8A7742 SH-PFC support.
 
 Driver improvements:
 
 - Severe cleanup and modernization of the MCP23s08 driver.
 
 - Mediatek driver modularized.
 
 - Setting config supported in the Meson driver.
 
 - Wakeup support for the Broadcom BCM7211.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl7dZC4ACgkQQRCzN7AZ
 XXOEZg/9F4dCwXmMxMxbS1c7DSHxsJTEHYKDDgAZ0L36N2DHihpMGbVQFzEe9khK
 xeSS8M4ecACYzw3FJGESaEC+fmTZ7zxr60SR++iyJJptooKAmcA00d2M/4VQ4ggN
 P/nXFEsGJvQ7nNJSO95wXr5K8aVkQW7rjo1cnblXH0c9dYOp+ItyodIytKcdWeZ9
 QfWSovYd+Oqra0braxx+pM/iTFVf6eOoCFZ8gkXB35pORsZ4Vl/e8pXMHXc3wUUm
 S1b6e3fifLiEGANvCEXz47/f3lUmUY26FsCSCAt92tHChq/p6coIKKvKyP4723PF
 R2L03iO8jMfsX+HwL2ivblSZ/lFExEgalWET56aogZClRQVynC0NMOnDEdluYGaT
 XJZPib9sRqQOF36+G9Bcy4zlqjj1LoHwqpiCdAhtj3AACTKdoLjDK0sJ3Wn5E8lJ
 QfIb+oqOmOGNHN/fdSsxsNM1ptOqNb/sW2Gk4O+X9tYzG17m16oZEVkrv4FNhmeC
 mePl/7aX+aMoHkEYxvt9tF3kRDFbndcuHdNFtRxq0Tx9jELiR91ySjjs9bUr2Vnl
 kkihtfIMZngQjBgHe2PNlcF2t7gSIgSBVEvwxslcUlx3XvVEDP16RKJV52aL80uu
 ev4k0h72CTxI1lZuNuW4cJYDKF/wJPqPtQ8+GQfOZxG7yuM8tOc=
 =3UGk
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.8 kernel cycle.

  It's just really boring this time. Zero core changes. Just linear
  development, cleanups and misc noncritical fixes. Some new drivers for
  very new Qualcomm and Intel chips.

  New drivers:

   - Intel Jasper Lake support.

   - NXP Freescale i.MX8DXL support.

   - Qualcomm SM8250 support.

   - Renesas R8A7742 SH-PFC support.

  Driver improvements:

   - Severe cleanup and modernization of the MCP23s08 driver.

   - Mediatek driver modularized.

   - Setting config supported in the Meson driver.

   - Wakeup support for the Broadcom BCM7211"

* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: sprd: Fix the incorrect pull-up definition
  pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
  pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
  pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
  pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
  pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
  pinctrl: bcm2835: Add support for wake-up interrupts
  pinctrl: bcm2835: Match BCM7211 compatible string
  dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
  dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
  dt-bindings: pinctrl: stm32: Add missing interrupts property
  pinctrl: at91-pio4: Add COMPILE_TEST support
  pinctrl: Fix return value about devm_platform_ioremap_resource()
  MAINTAINERS: Renesas Pin Controllers are supported
  dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
  pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
  pinctrl: ocelot: Remove instance number from pin functions
  pinctrl: ocelot: Always register GPIO driver
  dt-bindings: pinctrl: rockchip: update example
  pinctrl: amd: Add ACPI dependency
  ...
2020-06-07 16:13:43 -07:00
Linus Torvalds
80ef846e99 Staging/IIO driver patches for 5.8-rc1
Here is the large set of staging and IIO driver changes for 5.8-rc1
 
 Nothing major, but a lot of new IIO drivers are included in here, along
 with other core iio cleanups and changes.
 
 On the staging driver front, again, nothing noticable.  No new deletions
 or additions, just a ton of tiny cleanups all over the tree done by a
 lot of different people.  Most coding style, but many actual real fixes
 and cleanups that are nice to see.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK
 4zCG8NxAPFsQ1QP2SZPq
 =jEyw
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the large set of staging and IIO driver changes for 5.8-rc1

  Nothing major, but a lot of new IIO drivers are included in here,
  along with other core iio cleanups and changes.

  On the staging driver front, again, nothing noticable. No new
  deletions or additions, just a ton of tiny cleanups all over the tree
  done by a lot of different people. Most coding style, but many actual
  real fixes and cleanups that are nice to see.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
  staging: rtl8723bs: Use common packet header constants
  staging: sm750fb: Add names to proc_setBLANK args
  staging: most: usb: init return value in default path of switch/case expression
  staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
  staging: vchiq: move vchiq_release_message() into vchiq
  staging: vchi: Get rid of C++ guards
  staging: vchi: Get rid of not implemented function declarations
  staging: vchi: Get rid of vchiq_status_to_vchi()
  staging: vchi: Get rid of vchi_service_set_option()
  staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
  staging: vchiq: Move copy callback handling into vchiq
  staging: vchi: Get rid of vchi_queue_user_message()
  staging: vchi: Get rid of vchi_service_destroy()
  staging: most: usb: use function sysfs_streq
  staging: most: usb: add missing put_device calls
  staging: most: usb: use correct error codes
  staging: most: usb: replace code to calculate array index
  staging: most: usb: don't use error path to exit function on success
  staging: most: usb: move allocation of URB out of critical section
  staging: most: usb: return 0 instead of variable
  ...
2020-06-07 10:45:08 -07:00
Linus Torvalds
e611c0fe31 USB/PHY driver updates for 5.8-rc1
Here are the large set of USB and PHY driver updates for 5.8-rc1.
 
 Nothing huge, just lots of little things:
 	- USB gadget fixes and additions all over the place
 	- new PHY drivers
 	- PHY driver fixes and updates
 	- XHCI driver updates
 	- musb driver updates
 	- more USB-serial driver ids added
 	- various USB quirks added
 	- thunderbolt minor updates and fixes
 	- typec updates and additions
 
 Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX
 tnt2kz0UqReYpLt0wyJ7
 =YP7o
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here are the large set of USB and PHY driver updates for 5.8-rc1.

  Nothing huge, just lots of little things:

   - USB gadget fixes and additions all over the place

   - new PHY drivers

   - PHY driver fixes and updates

   - XHCI driver updates

   - musb driver updates

   - more USB-serial driver ids added

   - various USB quirks added

   - thunderbolt minor updates and fixes

   - typec updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
  usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
  Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
  Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
  USB: serial: ch341: fix lockup of devices with limited prescaler
  USB: serial: ch341: add basis for quirk detection
  CDC-ACM: heed quirk also in error handling
  USB: serial: option: add Telit LE910C1-EUX compositions
  usb: musb: Fix runtime PM imbalance on error
  usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  usb: musb: use true for 'use_dma'
  usb: musb: start session in resume for host port
  usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  USB: serial: qcserial: add DW5816e QDL support
  thunderbolt: Add trivial .shutdown
  usb: dwc3: keystone: Turn on USB3 PHY before controller
  dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  dt-bindings: usb: convert keystone-usb.txt to YAML
  ...
2020-06-07 09:42:16 -07:00
Linus Torvalds
3925c3bbdf pci-v5.8-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl7ZUn8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwuyxAAnjyHTbjpLtFcSh1on0Tsehi6hAiV
 o8w40hj3geQv/zVPgRsui3OSE9PTihPacKUQBxs/7M/iSF3cKzQEreYqDNbOMlun
 957X6CD0yTPChjcHy2brFFhQqs6O8Nl/acvkHKKP369nZkost5A2TMHPSKzKajdB
 fYw6imeunIvSpUYH9GlP9CU+suj25UHQqxUUyXAHqmF4R89j3mTpSMYJzq3VN426
 R77xeRC26lUEHepRgEiaFmdEK0zGTp/uXsJQNwaIFduNfX6x6Oo8u9EC4Mrb48g1
 duoxLUV6a8bqpjkwpPfQIv7lw1Mm1mx/vMA040zGVQR98QAMZacCPJO7eVHM/N9/
 m62bymyKHuNxXhWQwbeAyF0ZH+usaCFh7uidd4L0x1Uvs/GNCGD/icuKxHTnRWLv
 1P4bZg0n23YFzE5/eXY2voos+rfrycIoC5gspuJdP/H2Q5UM/EnI1RhizIItuqJY
 ORAdczo7a8oamt90WWZ636HeL1UQIGZjq1iWz2++vRTJGzfLeuOJj76cn2RuDQsZ
 +rBtQ1zH3saEZSARPdS5HQH+SaDxtjfu/AaAz6NDNSvasDLqmjRdOkM6UIU2pqMG
 cE9um1ijcSy2UjUInVPr3Hk7bbbd9YJTQQiWr04uL6ap0JpwRhSPqQpDHtLwLh+E
 R13t08tEMd09730=
 =9ymj
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...
2020-06-06 11:01:58 -07:00