IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This adds a new assertion to be used by bch2_inode_update_after_write(),
which updates the VFS inode based on the update to the btree inode we
just did - we require that the btree inode still be locked when we do
that update.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- We should only be clearing should_be_locked in btree_path_set_pos() -
it's the responsiblity of the btree_path code, not the btree_iter
code.
- bch2_path_put() needs to pay attention to path->should_be_locked, to
ensure we don't drop locks we're supposed to be keeping.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
The bch2_btree_path_upgrade() call was failing and tripping an assert -
path->level + 1 is in this case not necessarily exactly what we want,
fix it by upgrading exactly the locks we want.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This helps to unify the interface between bch2_mark_key() and
bch2_trans_mark_key() - and it also gives access to the journal
reservation and journal seq in the mark_key path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
But we don't need to call it from outside the btree iterator code
anymore, since it's called by bch2_trans_begin() and
bch2_btree_path_traverse().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Code that uses for_each_btree_key often wants transaction restarts to be
handled locally and not returned. Originally, we wouldn't return
transaction restarts if there was a single iterator in the transaction -
the reasoning being if there weren't other iterators being invalidated,
and the current iterator was being advanced/retraversed, there weren't
any locks or iterators we were required to preserve.
But with the btree_path conversion that approach doesn't work anymore -
even when we're using for_each_btree_key() with a single iterator there
will still be two paths in the transaction, since we now always preserve
the path at the pos the iterator was initialized at - the reason being
that on restart we often restart from the same place.
And it turns out there's now a lot of for_each_btree_key() uses that _do
not_ want transaction restarts handled locally, and should be returning
them.
This patch splits out for_each_btree_key_norestart() and
for_each_btree_key_continue_norestart(), and converts existing users as
appropriate. for_each_btree_key(), for_each_btree_key_continue(), and
for_each_btree_node() now handle transaction restarts themselves by
calling bch2_trans_begin() when necessary - and the old hack to not
return transaction restarts when there's a single path in the
transaction has been deleted.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that peek_node()/next_node() are converted to return errors
directly, we don't need bch2_trans_exit() to return errors - it's
cleaner this way and wasn't used much anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes for_each_btree_node() to work like for_each_btree_key(),
and to that end bch2_btree_iter_peek_node() and next_node() also return
error ptrs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- check for getting to the end of the btree in bch2_path_verify_locks
and __btree_path_traverse_all(), this fixes an infinite loop in
__btree_path_traverse_all().
- relax requirement in bch2_btree_node_upgrade() that we must want an
intent lock, this fixes bugs with paths that point to interior nodes
(nonzero level).
- bch2_btree_node_update_key(): fix it to upgrade the path to an intent
lock, if necessary
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Btree node iterators want the interior btree_path to point to the same
pos as the returned btree node - this fixes a regression from the
introduction of btree_path, where rewriting/updating keys of btree nodes
(e.g. in bch2_dev_metadata_drop()) via btree node iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that all the existing code has been converted for snapshots, this
patch changes the code for initializing a btree iterator to require a
snapshot to be specified, and also change bkey_invalid() to allow for
non U32_MAX snapshot IDs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
For snapshots, we need to implement btree lookups that return the first
key that's an ancestor of the snapshot ID the lookup is being done in -
and filter out keys in unrelated snapshots. This patch adds the btree
iterator flag BTREE_ITER_FILTER_SNAPSHOTS which does that filtering.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Figured out the bug we were chasing, and it had nothing to do with
locking btree iterators/paths out of order.
This reverts commit ff08733dd298c969aec7c7828095458f73fd5374.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We need to take all needed intent locks when relocking an iterator:
bch2_btree_path_traverse() had a special cased, faster version of this,
but it really should be in up_until_good_node() so that set_pos() can
use it too.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch significantly reduces the number of btree lookups required in
the extent update path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
New rule is: if a btree path holds any locks it should be holding
precisely the locks wanted (accoringing to path->level and
path->locks_want).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Since iter->real_pos was introduced, we no longer have to deal with
extent btree iterators that have skipped past deleted keys - this is a
real performance improvement on btree updates.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
btree_path_traverse_all() traverses btree iterators in sorted order, and
thus shouldn't see transaction restarts due to potential deadlocks - but
sometimes we do. This patch adds some more assertions and tracks some
more state to help track this down.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We really only need to distinguish between btree iterators and btree key
cache iterators - this is more prep work for btree_path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This was used for an optimization that hasn't existing in quite awhile
- iter->uptodate will probably be going away as well.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
These utility functions are for managing btree node state within a
btree_trans - rename them for consistency, and drop some unneeded
arguments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is prep work for splitting btree_path out from btree_iter -
btree_path will not have a pointer to btree_trans.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
BTREE_ITER_SET_POS_AFTER_COMMIT is used internally to automagically
advance extent btree iterators on sucessful commit.
But with the upcomnig btree_path patch it's getting more awkward to
support, and it adds overhead to core data structures that's only used
in a few places, and can be easily done by the caller instead.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This factors out bch2_dump_trans_iters_updates() from the iter alloc
overflow path, and makes some small improvements to what it prints.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
iter->real_pos needs to match the key returned or bad things will happen
when we go to update the key at that position. When we returned a
pending update from btree_trans_peek_updates(), this wasn't necessarily
the case.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This makes the flow control in bch2_btree_iter_peek() and
bch2_btree_iter_peek_prev() a bit cleaner.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This will be used to make other operations on btree iterators within a
transaction more efficient, and enable some other improvements to how we
manage btree iterators.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
iter->should_be_locked means that if bch2_btree_iter_relock() fails, we
need to restart the transaction.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
If there's more than one iterator in the btree_trans, it's requried to
call bch2_trans_begin() to handle transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Start tracking when btree transactions have been restarted - and assert
that we're always calling bch2_trans_begin() immediately after
transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Btree node merging now happens prior to transaction commit, not after,
so we don't need to pay attention to BTREE_INSERT_NOUNLOCK.
Also, foreground_maybe_merge shouldn't be calling
bch2_btree_iter_traverse_all() - this is becoming private to the btree
iterator code and should only be called by bch2_trans_begin().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
On transaction restart iterators won't be locked anymore - make sure
we're always checking for errors.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
bch2_btree_iter_traverse_all() may loop, and it needs to clear
iter->should_be_locked on every iteration.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new helper for btree_cache.c that does what we want where
the iterator is still being traverse - and also eliminates some
unnecessary transaction restarts.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
