IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We were iterating across stripe boundaries properly, but not moving the
write buffer pointer forward. This caused us to rewrite the same data
after the break. Fix by adjusting the data pointer forward, and
recalculating the io and buffer alignment after the break.
Signed-off-by: Sage Weil <sage@newdream.net>
If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.
Reported-by: Brian Chrisman <brchrisman@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Getting ENOENT is equivalent to reading 0 bytes. Make that correction
before setting up the hit_stripe and was_short flags.
Fixes the following case:
dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer. For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.
Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
In e9964c10 we change cap flushing to do a delicate dance because some
inodes on the cap_dirty list could be in a migrating state (got EXPORT but
not IMPORT) in which we couldn't actually flush and move from
dirty->flushing, breaking the while (!empty) { process first } loop
structure. It worked for a single sync thread, but was not reentrant and
triggered infinite loops when multiple syncers came along.
Instead, move inodes with dirty to a separate cap_dirty_migrating list
when in the limbo export-but-no-import state, allowing us to go back to
the simple loop structure (which was reentrant). This is cleaner and more
robust.
Audited the cap_dirty users and this looks fine:
list_empty(&ci->i_dirty_item) is still a reliable indicator of whether we
have dirty caps (which list we're on is irrelevant) and list_del_init()
calls still do the right thing.
Signed-off-by: Sage Weil <sage@newdream.net>
Since we pass the nofail arg, we should never get an error; BUG if we do.
(And fix the function to not return an error if __map_request fails.)
Signed-off-by: Sage Weil <sage@newdream.net>
Both off and fi->offset are unsigned, so the difference is always >= 0.
Compare them directly instead of the sign of the difference.
Signed-off-by: Sage Weil <sage@newdream.net>
If we grab new_cap, retake the lock, and find we already have a cap now
for the given mds, release new_cap.
Signed-off-by: Sage Weil <sage@newdream.net>
We put ourselves on an inode list for the parent directory of metadata
operations so that an fsync on the directory will wait for metadata updates
to commit to disk. We weren't holding a reference to that directory,
however, and under certain workloads (fsstress in this case) the directory
can go away.
Signed-off-by: Sage Weil <sage@newdream.net>
We increments i_wrbuffer_ref when taking the Fb cap. This breaks
the dirty page accounting and causes looping in
__ceph_do_pending_vmtruncate, and ceph client hangs.
This bug can be reproduced occasionally by running blogbench.
Add a new field i_wb_ref to inode and dedicate it to Fb reference
counting.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The mds session, s, could be freed during ceph_put_mds_session.
Move dout before ceph_put_mds_session.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>
We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: Create a new key type "ceph".
libceph: Get secret from the kernel keys api when mounting with key=NAME.
ceph: Move secret key parsing earlier.
libceph: fix null dereference when unregistering linger requests
ceph: unlock on error in ceph_osdc_start_request()
ceph: fix possible NULL pointer dereference
ceph: flush msgr_wq during mds_client shutdown
This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥
If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client. This fixes
an oops easily triggered under UML by
while true ; do mount ... ; umount ... ; done
Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out. This bug is basically an artifact of the ceph ->
ceph+libceph conversion.
Signed-off-by: Sage Weil <sage@newdream.net>
In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The ino32 mount option forces the ceph fs to report 32 bit
ino values. This is useful for 64 bit kernels with 32 bit userspace.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
d_move puts the renamed dentry at the end of d_subdirs, screwing with our
cached dentry directory offsets. We were just clearing I_COMPLETE to avoid
any possibility of trouble. However, assigning the renamed dentry an
offset at the end of the directory (to match it's new d_subdirs position)
is sufficient to maintain correct behavior and hold onto I_COMPLETE.
This is especially important for workloads like rsync, which renames files
into place. Before, we would lose I_COMPLETE and do MDS lookups for each
file. With this patch we only talk to the MDS on create and rename.
Signed-off-by: Sage Weil <sage@newdream.net>
First, this was racy anyway: d_release isn't called until well after the
dentry is unhashed. Second, this runs afoul of the recent dcache change
that clears d_parent prior to calling d_release (949854d0), causing a NULL
pointer dereference.
Signed-off-by: Sage Weil <sage@newdream.net>
This reverts commit 97d79b403e.
This fails to account for d_parent changes due to rename or disconnected
dentries due to submounts or NFS reexports.
Signed-off-by: Sage Weil <sage@newdream.net>
When creating a new dentry we now hold a reference to the parent
inode in the ceph_dentry. This is required due to the new RCU
changes from 949854d0, which set dentry->d_parent to NULL in d_kill before
calling the ->release() callback. If/when that behavior is changed, we can
revert this hack.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We were forming a dirty list, and then queueing cap_snaps for each realm
_and_ its children, regardless of whether the children were already in the
dirty list. This meant we did it twice for some realms. Which in turn
meant we corrupted mdsc->snap_flush_list when the cap_snap was re-added to
the list it was already on, and could trigger an infinite loop.
We were also using recursion to do reach all the children, a no-no when
stack is limited.
Instead, (re)queue any children on the dirty list, avoiding processing
anything twice and avoiding any recursion.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: avoid picking MDS that is not active
ceph: avoid immediate cap check after import
ceph: fix flushing of caps vs cap import
ceph: fix erroneous cap flush to non-auth mds
ceph: fix cap_wanted_delay_{min,max} mount option initialization
ceph: fix xattr rbtree search
ceph: fix getattr on directory when using norbytes
Ignore replication or auth frag data if it indicates an MDS that is not
active. This can happen if the MDS shuts down and the client has stale
data about the namespace distribution across the MDS cluster. If that's
the case, fall back to directing the request based on the auth cap (which
should always be accurate).
Signed-off-by: Sage Weil <sage@newdream.net>
The NODELAY flag avoids the heuristics that delay cap (issued/wanted)
release. There's no reason for that after we import a cap, and it kills
whatever benefit we get from those delays.
Signed-off-by: Sage Weil <sage@newdream.net>
If we are mid-flush and a cap is migrated to another node, we need to
resend the cap flush message to the new MDS, and do so with the original
flush_seq to avoid leaking across a sync boundary. Previously we didn't
redo the flush (we only flushed newly dirty data), which would cause a
later sync to hang forever.
Signed-off-by: Sage Weil <sage@newdream.net>
The int flushing is global and not clear on each iteration of the loop,
which can cause a second flush of caps to any MDSs with ids greater than
the auth.
Signed-off-by: Sage Weil <sage@newdream.net>
Fix xattr name comparison in rbtree search for strings that share a prefix.
The *name argument is null terminated, but the xattr name is not, so we
need to use strncmp, but that means adjusting for the case where name is
a prefix of xattr->name.
The corresponding case in __set_xattr() already handles this properly
(although in that case *name is also not null terminated).
Reported-by: Sergiy Kibrik <sakib@meta.ua>
Signed-off-by: Sage Weil <sage@newdream.net>
The norbytes mount option was broken, and when doing getattr
on a directory it return the rbytes instead of the number of
entities. This commit fixes it.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix cleanup when trying to mount inexistent image
net/ceph: make ceph_msgr_wq non-reentrant
ceph: fsc->*_wq's aren't used in memory reclaim path
ceph: Always free allocated memory in osdmap_decode()
ceph: Makefile: Remove unnessary code
ceph: associate requests with opening sessions
ceph: drop redundant r_mds field
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
ceph: add dir_layout to inode
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.
Also, Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Associate request with sessions that aren't yep open. This makes the
debugfs mdsc request list more informative.
Signed-off-by: Sage Weil <sage@newdream.net>
The r_mds field is redundant, since we can find the same information at
r_session->s_mds, and when r_session is NULL then r_mds is meaningless.
Signed-off-by: Sage Weil <sage@newdream.net>
This implements the DIRLAYOUTHASH protocol feature, which passes the dir
layout over the wire from the MDS. This gives the client knowledge
of the correct hash function to use for mapping dentries among dir
fragments.
Note that if this feature is _not_ present on the client but is on the
MDS, the client may misdirect requests. This will result in a forward
and degrade performance. It may also result in inaccurate NFS filehandle
generation, which will prevent fh resolution when the inode is not present
in the client cache and the parent directories have been fragmented.
Signed-off-by: Sage Weil <sage@newdream.net>
Add a ceph_dir_layout to the inode, and calculate dentry hash values based
on the parent directory's specified dir_hash function. This is needed
because the old default Linux dcache hash function is extremely week and
leads to a poor distribution of files among dir fragments.
Signed-off-by: Sage Weil <sage@newdream.net>
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Protect d_subdirs and d_child with d_lock, except in filesystems that aren't
using dcache_lock for these anyway (eg. using i_mutex).
Note: if we change the locking rule in future so that ->d_child protection is
provided only with ->d_parent->d_lock, it may allow us to reduce some locking.
But it would be an exception to an otherwise regular locking scheme, so we'd
have to see some good results. Probably not worthwhile.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Protect d_unhashed(dentry) condition with d_lock. This means keeping
DCACHE_UNHASHED bit in synch with hash manipulations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
we start protecting many other dentry members with d_lock.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The fh_to_dentry etc. methods use ceph_init_dentry(), which assumes that
d_parent is defined. It isn't for those callers, so check!
Signed-off-by: Sage Weil <sage@newdream.net>
The user buffer may be 512-byte aligned, not page-aligned. We were
assuming the buffer was page-aligned and only accounting for
non-page-aligned io offsets.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Fill in the local lock with response data if appropriate,
and don't call posix_lock_file when reading locks.
Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com>
Acked-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Previously the kernel client incorrectly assumed everything was a directory.
Signed-off-by: Herb Shiu <herb_shiu@tcloudcomputing.com>
Acked-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
last may be NULL, but we dereference it in the else branch without
checking. Normally it doesn't trigger because last == NULL when fpos == 2,
but it could happen on a newly opened dir if the user seeks forward.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: fix readdir EOVERFLOW on 32-bit archs
ceph: fix frag offset for non-leftmost frags
ceph: fix dangling pointer
ceph: explicitly specify page alignment in network messages
ceph: make page alignment explicit in osd interface
ceph: fix comment, remove extraneous args
ceph: fix update of ctime from MDS
ceph: fix version check on racing inode updates
ceph: fix uid/gid on resent mds requests
ceph: fix rdcache_gen usage and invalidate
ceph: re-request max_size if cap auth changes
ceph: only let auth caps update max_size
ceph: fix open for write on clustered mds
ceph: fix bad pointer dereference in ceph_fill_trace
ceph: fix small seq message skipping
Revert "ceph: update issue_seq on cap grant"
One of the readdir filldir_t callers was passing the raw ceph 64-bit ino
instead of the hashed 32-bit one, producing an EOVERFLOW in the filler
callback. Fix this by calling the ceph_vino_to_ino() helper to do the
conversion.
Reported-by: Jan Smets <jan.smets@alcatel-lucent.com>
Tested-by: Jan Smets <jan.smets@alcatel-lucent.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We start at offset 2 for the leftmost frag, and 0 for subsequent frags.
When we reach the end (rightmost), we go back to 2. This fixes readdir on
fragmented (large) directories.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched. This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO). We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.
Explicitly specify the page alignment when setting up OSD IO requests.
Signed-off-by: Sage Weil <sage@newdream.net>
The client can have a newer ctime than the MDS due to AUTH_EXCL and
XATTR_EXCL caps as well; update the check in ceph_fill_file_time
appropriately.
This fixes cases where ctime/mtime goes backward under the right sequence
of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that
goes to the MDS).
Signed-off-by: Sage Weil <sage@newdream.net>
We may get updates on the same inode from multiple MDSs; generally we only
pay attention if the update is newer than what we already have. The
exception is when an MDS sense unstable information, in which case we
always update.
The old > check got this wrong when our version was odd (e.g. 3) and the
reply version was even (e.g. 2): the older stale (v2) info would be
applied. Fixed and clarified the comment.
Signed-off-by: Sage Weil <sage@newdream.net>
MDS requests can be rebuilt and resent in non-process context, but were
filling in uid/gid from current_fsuid/gid. Put that information in the
request struct on request setup.
This fixes incorrect (and root) uid/gid getting set for requests that
are forwarded between MDSs, usually due to metadata migrations.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use rdcache_gen to indicate whether we "might" have cached
pages. Now we just look at the mapping to determine that. However, some
old behavior remains from that transition.
First, rdcache_gen == 0 no longer means we have no pages. That can happen
at any time (presumably when we carry FILE_CACHE). We should not reset it
to zero, and we should not check that it is zero.
That means that the only purpose for rdcache_revoking is to resolve races
between new issues of FILE_CACHE and an async invalidate. If they are
equal, we should invalidate. On success, we decrement rdcache_revoking,
so that it is no longer equal to rdcache_gen. Similarly, if we success
in doing a sync invalidate, set revoking = gen - 1. (This is a small
optimization to avoid doing unnecessary invalidate work and does not
affect correctness.)
Signed-off-by: Sage Weil <sage@newdream.net>
If the auth cap migrates to another MDS, clear requested_max_size so that
we resend any pending max_size increase requests. This fixes potential
hangs on writes that extend a file and race with an cap migration between
MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
Only the auth MDS has a meaningful max_size value for us, so only update it
in fill_inode if we're being issued an auth cap. Otherwise, a random
stat result from a non-auth MDS can clobber a meaningful max_size, get
the client<->mds cap state out of sync, and make writes hang.
Specifically, even if the client re-requests a larger max_size (which it
will), the MDS won't respond because as far as it knows we already have a
sufficiently large value.
Signed-off-by: Sage Weil <sage@newdream.net>
Normally when we open a file we already have a cap, and simply update the
wanted set. However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS. Only
reuse existing caps if we are opening for read or the existing cap is auth.
Signed-off-by: Sage Weil <sage@newdream.net>
We dereference *in a few lines down, but only set it on rename. It is
apparently pretty rare for this to trigger, but I have been hitting it
with a clustered MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
This reverts commit d91f2438d8.
The intent of issue_seq is to distinguish between mds->client messages that
(re)create the cap and those that do not, which means we should _only_ be
updating that value in the create paths. By updating it in handle_cap_grant,
we reset it to zero, which then breaks release.
The larger question is what workload/problem made me think it should be
updated here...
Signed-off-by: Sage Weil <sage@newdream.net>
This removes more dead code that was somehow missed by commit 0d99519efe
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We were taking dcache_lock inside of i_lock, which introduces a dependency
not found elsewhere in the kernel, complicationg the vfs locking
scalability work. Since we don't actually need it here anyway, remove
it.
We only need i_lock to test for the I_COMPLETE flag, so be careful to do
so without dcache_lock held.
Signed-off-by: Sage Weil <sage@newdream.net>
Convert a sequence of kmalloc and memcpy to use kmemdup.
The semantic patch that performs this transformation is:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a,flag,len;
expression arg,e1,e2;
statement S;
@@
a =
- \(kmalloc\|kzalloc\)(len,flag)
+ kmemdup(arg,len,flag)
<... when != a
if (a == NULL || ...) S
...>
- memcpy(a,arg,len+1);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning:
fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list
fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want
fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Switch from using the BKL explicitly to the new lock_flocks() interface.
Eventually this will turn into a spinlock.
Signed-off-by: Sage Weil <sage@newdream.net>
When the lock_kernel() turns into lock_flocks() and a spinlock, we won't
be able to do allocations with the lock held. Preallocate space without
the lock, and retry if the lock state changes out from underneath us.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The i_rdcache_gen value only implies we MAY have cached pages; actually
check the mapping to see if it's worth bothering with an invalidate.
Signed-off-by: Sage Weil <sage@newdream.net>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
Allow the messenger to send/receive data in a bio. This is added
so that we wouldn't need to copy the data into pages or some other buffer
when doing IO for an rbd block device.
We can now have trailing variable sized data for osd
ops. Also osd ops encoding is more modular.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The osd requests creation are being decoupled from the
vino parameter, allowing clients using the osd to use
other arbitrary object names that are not necessarily
vino based. Also, calc_raw_layout now takes a snap id.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Implement a pool lookup by name. This will be used by rbd.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We need to update the issue_seq on any grant operation, be it via an MDS
reply or a separate grant message. The update in the grant path was
missing. This broke cap release for inodes in which the MDS sent an
explicit grant message that was not soon after followed by a successful
MDS reply on the same inode.
Also fix the signedness on seq locals.
Signed-off-by: Sage Weil <sage@newdream.net>
If an MDS tries to revoke caps that we don't have, we want to send
releases early since they probably contain the caps message the MDS
is looking for.
Previously, we only sent the messages if we didn't have the inode either. But
in a multi-mds system we can retain the inode after dropping all caps for
a single MDS.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
encode_fh on error should update max_len with minimum required
size, so that caller can redo the call with the reallocated buffer.
This is required with open by handle patch series
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sage Weil <sage@newdream.net>
encode_fh function should return 255 on error as done by other file
system to indicate EOVERFLOW. Also max_len is in sizeof(u32) units
and not in bytes.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we interrupt an osd request, we call __cancel_request, but it wasn't
verifying that req->r_osd was non-NULL before dereferencing it. This could
cause a crash if osds were flapping and we aborted a request on said osd.
Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).
This allows the MDS RECALL_STATE process work for inodes that have cached
pages.
Signed-off-by: Sage Weil <sage@newdream.net>
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once. It's also a waste.
So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).
Signed-off-by: Sage Weil <sage@newdream.net>
The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context. To fix this, we:
- move inodes completely to the new (split) realm so that i_snap_realm
is correct, and
- generate the new snapc's _before_ queueing the cap_snaps in
ceph_update_snap_trace().
Signed-off-by: Sage Weil <sage@newdream.net>
Stop sending FLUSHSNAP messages when we hit a capsnap that has dirty_pages
or is still writing. We'll send the newer capsnaps only after the older
ones complete.
Signed-off-by: Sage Weil <sage@newdream.net>
The 'follows' should match the seq for the snap context for the given snap
cap, which is the context under which we have been dirtying and writing
data and metadata. The snapshot that _contains_ those updates thus
_follows_ that context's seq #.
Signed-off-by: Sage Weil <sage@newdream.net>
When adding the readdir results to the cache, ceph_set_dentry_offset was
clobbered our just-set offset. This can cause the readdir result offsets
to get out of sync with the server. Add an argument to the helper so
that it does not.
This bug was introduced by 1cd3935bed.
Signed-off-by: Sage Weil <sage@newdream.net>
Cast the value before shifting so that we don't run out of bits with a
32-bit unsigned long. This fixes wrapping of high file offsets into the
low 4GB of a file on disk, and the subsequent data corruption for large
files.
Signed-off-by: Sage Weil <sage@newdream.net>
Fix the reconnect encoding to encode the cap record when the MDS does not
have the FLOCK capability (i.e., pre v0.22).
Signed-off-by: Sage Weil <sage@newdream.net>
When we release a root dentry, particularly after a splice, the parent
(actually our) inode was evaluating to NULL and was getting dereferenced
by ceph_snap(). This is reproduced by something as simple as
mount -t ceph monhost:/a/b mnt
mount -t ceph monhost:/a mnt2
ls mnt2
A splice_dentry() would kill the old 'b' inode's root dentry, and we'd
crash while releasing it.
Fix by checking for both the ROOT and NULL cases explicitly. We only need
to invalidate the parent dir when we have a correct parent to invalidate.
Signed-off-by: Sage Weil <sage@newdream.net>
get_ticket_handler() returns a valid pointer or it returns
ERR_PTR(-ENOMEM) if kzalloc() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Just scrubbing some warnings so I can see real problem ones in the build
noise. For 32bit we need to coax gcc politely into believing we really
honestly intend to the casts. Using (u64)(unsigned long) means we cast from
a pointer to a type of the right size and then extend it. This stops the
warning spew.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_get_inode() returns an ERR_PTR and it doesn't return a NULL.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under. It is used by queue_cap_snap to set up
the cap_snap. However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps. This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).
Signed-off-by: Sage Weil <sage@newdream.net>
Fix argument order. We want to move the item to the end of the list, not
change the position of the head.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we hold the EXCL cap, we cannot trust the dir stats from the MDS (num
files, subdirs) and must not incorrectly conclude that the directory is
empty. If we do, we get can bad results from lookup (bad ENOENT) and
bad readdir results.
Signed-off-by: Sage Weil <sage@newdream.net>
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.
Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
When making a request in the virtual snapdir or a snapped portion of the
namespace, we should choose the MDS based on the first nonsnap parent (and
its caps). If that is not the best place, we will get forward hints to
find the right MDS in the cluster. This fixes ESTALE errors when using
the .snap directory and namespace with multiple MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
When a realm is updated, we need to queue writeback on inodes in that
realm _and_ its children. Otherwise, if the inode gets cowed on the
server, we can get a hang later due to out-of-sync cap/snap state.
Signed-off-by: Sage Weil <sage@newdream.net>
When we snapshot dirty metadata that needs to be written back to the MDS,
include dirty xattr metadata. Make the capsnap reference the encoded
xattr blob so that it will be written back in the FLUSHSNAP op.
Also fix the capsnap creation guard to include dirty auth or file bits,
not just tests specific to dirty file data or file writes in progress
(this fixes auth metadata writeback).
Signed-off-by: Sage Weil <sage@newdream.net>
We should include the xattr metadata blob in the cap update message any
time we are flushing dirty state, NOT just when we are also dropping the
cap. This fixes async xattr writeback.
Also, clean up the code slightly to avoid duplicating the bit test.
Signed-off-by: Sage Weil <sage@newdream.net>
The use of a completion when waiting for session shutdown during umount is
inappropriate, given the complexity of the condition. For multiple MDS's,
this resulted in the umount thread spinning, often preventing the session
close message from being processed in some cases.
Switch to a waitqueue and defined a condition helper. This cleans things
up nicely.
Signed-off-by: Sage Weil <sage@newdream.net>
Generalize the current statfs synchronous requests, and support pool_ops.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Normally, if the Fb cap bit is being revoked, we queue an async writeback.
If there is no dirty data but we still hold the cap, this leaves the
client sitting around doing nothing until the cap timeouts expire and the
cap is released on its own (as it would have been without the revocation).
Instead, only queue writeback if the bit is actually used (i.e., we have
dirty data). If not, we can reply to the revocation immediately.
Signed-off-by: Sage Weil <sage@newdream.net>
Implement flock inode operation to support advisory file locking. All
lock/unlock operations are synchronous with the MDS. Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Define the MDS operations and data types for doing file advisory locking
with the MDS.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
