IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use __copy_to_user() rather than __put_user_error() for individual
members when saving VFP state.
This has the benefit of disabling/enabling PAN once per copied struct
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When setting a dummy iwmmxt context, create a local instance and
use __copy_to_user both cases whether iwmmxt is being used or not.
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When saving the ARM integer registers, use __copy_to_user() to
copy them into user signal frame, rather than __put_user_error().
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This is required for the imx pci driver to send the PME_Turn_Off TLP.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
As the v4l2-fwnode now allows drivers to set defaults, and eventually
override them by specifying properties in DTS, use defaults for the CEU
driver.
Also remove endpoint properties from the gr-peach-audiocamerashield as
they match the defaults now specified in the driver code
(h/vsync-active and bus-width) or are not relevant to the interface
as they cannot be configured (pclk-sample).
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Russell writes:
"A couple of small ARM fixes from Stefan and Thomas:
- Adding the io_pgetevents syscall
- Fixing a bounds check in pci_ioremap_io()"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8799/1: mm: fix pci_ioremap_io() offset check
ARM: 8787/1: wire up io_pgetevents syscall
- Fix crash of qman_portal by deferring its probe if qman is not probed
-----BEGIN PGP SIGNATURE-----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=qVf2
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-fix-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into fixes
NXP/FSL SoC driver fixes for v4.19 round 2
- Fix crash of qman_portal by deferring its probe if qman is not probed
* tag 'soc-fsl-fix-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qman_portals: defer probe after qman's probe
soc: fsl: qbman: add APIs to retrieve the probing status
soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()
soc: fsl: qbman: qman: avoid allocating from non existing gen_pool
ARM: dts: BCM63xx: Fix incorrect interrupt specifiers
MAINTAINERS: update the Annapurna Labs maintainer email
ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT
ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This board has a Micron MT29F8G08ABACAWP chip which requires a ECC
strength of 8/512. Rather than hard coding any particular strength the
the nand controller auto-detect the ECC strength based on the ONFI data.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
- i.MX53 QSB board stops working when cpufreq driver is enabled,
because the default OPP table has the maximum CPU frequency at
1.2GHz, while the board is only capable of running 1GHz. Fix up
the OPP table for the board to get it work with cpufreq driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbtCuVAAoJEFBXWFqHsHzOHDEH/RXzkCIZCmvVhdXIQDa/PC7b
GupBi+UJE2iQMS3Z3RNYnZQ2yK8zq7AZNIjZtR7/8dm6ALFjXMGvfj19Cs0wThdt
VQ3g7FyS76lwvb2sVl6yGZTOcZfn7nIwFC9NNfY1FSt87QXKBPG0UmnMpCxR7m+1
V1d0T3y0WejpRigtzGJZJwibkOFoKy8HbAn09BBzyE+eRnNcXSp6NunIr+82AGgo
yA3rtcoDXD997wXMUUgnFzh0VjqH5wrrbMtplWOFpDtKEFxwiHGOjWsIm6S2xi/8
SKkk13M+GBHtPR0ygTtRngV1TF0z0kTdArhS/GGGTzWbpZ5sri5khyCfNP+i0LA=
=xyJS
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.19, round 2:
- i.MX53 QSB board stops working when cpufreq driver is enabled,
because the default OPP table has the maximum CPU frequency at
1.2GHz, while the board is only capable of running 1GHz. Fix up
the OPP table for the board to get it work with cpufreq driver.
* tag 'imx-fixes-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb: disable 1.2GHz OPP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----------------------------
- A non-critical fix to reduce errors on A/DC on Lego Mindstorms EV3
- Support for GPIO expander on DA850 EVM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJbtiwqAAoJEGFBu2jqvgRNmF0QAJNow69RDeV/WHJgFhxN79pK
Qo5bjwgVEhz1fbFDaIoOxYcIjWfJ0zlum1F8PHGh/GN68vrGqrxF01yHqoVTVfpL
GQ6B4r0D7Dz6AjQem01wqaqiPQ2IaNaZzFB+ExYR3nePiZu2s9qj5uXfPDaib7rS
8unBRbWJEJP7Ip0z90XY9nOxYCT5OALAJdCs1bGfxaqlZJN3vucghmeuBXXNmSNx
4W1j3pb/2ogxL0N+T3OsKPhA6FF6/3VYGLYOuy7I0SWtxNEiV5oBsWSEMBoBCR42
mtS84rjzUpbKvGepdt//kmtUYMv8xw5d78gnfbrJqFN5DpDk33SqknVe3ffun5o9
TLhhgl1sGZzINhI3ZK648Z7VHL2dzeI13Qz6BA13w1gsv1cxBHdnMjkxq2wDhjRK
h0ZKjdoqJavij04Bng/hjMMjR5or21UwuxrGVxqGkx4iFrkkbrk+ahaNi5Do7+bd
dEZnzPTOB/pG3nnF42vLO/QSoKBoAsjK0ZDMnoV65/GjmMVWQryW7QtdVCqfmPAk
XRAZV6lU2UCFWdmA934acF2tqeUkpT7irecuoWiAA0lfhvFqhpGScVwy888/OYzz
QQzs8EN75q6OfyAc2ETNMplAdc6KRmf6wuAn7DAOBZDN2eREsqgNgTMPXcDFUOe2
bRRC7qjLeFDYb7mSXttw
=NVmP
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
DaVinci DT updates for v4.20
----------------------------
- A non-critical fix to reduce errors on A/DC on Lego Mindstorms EV3
- Support for GPIO expander on DA850 EVM
* tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
ARM: dts: da850-evm: Enable tca6416 on baseboard
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAluyKz0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSxkB/9hXQysAvkRD0oCsBhRpRse/XkE99IyqoFD
QixXrUVdO21P5h/x0seJoqVE/dFrl2iQUBhgL9jyRHEZGPoTbZw0KoSe50KwGQp4
WkMqj9MukWdM11HDmonaQR+CcyoOkZHhWjGHuSIUSJKWi8wugVzL/X9IzHd7VdqB
TZ6DDnFqbxOsCMDw4jcPIRMO/wkePR7g3sL3u+Wn/9owsfho4pvP+kX/b8DOwS1N
mI30Ga+0O19XtGx3psc+xh7PSjKbw5UzVFz7EtHgeQHl0YjYUGh+RRf4nJmg17+T
YfxzVuvFLol6cKITI+iU5CGaJdazR1cThekCEyxFMHXlLIlxogLq
=MloN
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.
* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3288-based Tinker board S
ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
ARM: dts: rockchip: add rk3188 lcd controller nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
if we are reading analog values as fast as possible (i.e. using DMA to
service the SPI) the A/DC chip will read incorrect values - as much as
0.1V off when the SPI is running at 10MHz. (This has to do with the
capacitor charge time when channels are muxed in the A/DC.)
This patch slows down the SPI as much as possible (if CPU is at 456MHz,
SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
we could get ~891kHz, but we're just rounding it to 1MHz). We also use
the max allowable value for WDELAY to slow things down even more.
These changes reduce the error of the analog values to about 5mV, which
is tolerable.
Commits a3762b13a596 ("spi: spi-davinci: Add support for SPI_CS_WORD")
and e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") introduce changes that allow DMA transfers to be used, so
this slow down is needed now.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There is a GPIO expander on both the UI board as well as the
baseboard. This patch enables the second tca6416 and identifies
it as being on the baseboard using _bb as the suffix.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Since the very beginning, unsigned int .irq member of struct
plat_serial8250_port introduced by commit eff443df679e ("OMAP1:
AMS_DELTA: add modem support") was statically initialized to a negative
value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta:
assign MODEM IRQ from GPIO descriptor") has introduced some new code
which checks for that member carrying a negative value which is
impossible.
Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check
and let the modem device be registered regardless of .irq value, and
the value handled by "serial8250" driver.
Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.
For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.
For omap5, we enable omap5 USB OTG mode for DWC3 controller.
And we add support for am335x based Moxa UC-2100 series of industrial
computers.
-----BEGIN PGP SIGNATURE-----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=EQcw
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
More devicetree changes for omap variants
There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.
For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.
For omap5, we enable omap5 USB OTG mode for DWC3 controller.
And we add support for am335x based Moxa UC-2100 series of industrial
computers.
* tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
ARM: dts: am335x: add support for Moxa UC-2101 open platform
ARM: dts: am335x: add common file for UC-2100 series
ARM: dts: omap5: enable OTG role for DWC3 controller
ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The purpose of CONFIG_CPU_32v3 is to avoid ldrh/strh on the RiscPC,
which is pretty much an ARMv4 device, except its bus will choke on the
half-words. The way to make the C compiler not output ldrh/strh is with
-march=armv3, which doesn't support them in the ISA. However, this
prevents certain cryptography code from working that uses instructions
like umull. Fortunately there's also -march=armv3m that does support
those, making it possible to continue assembling optimized cryptography
routines for our beloved RiscPC.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
While in theory multiple unwinders could be compiled in, it does
not make sense in practise. Use a choice to make the unwinder
selection mutually exclusive and mandatory.
Already before this commit it has not been possible to deselect
FRAME_POINTER. Remove the obsolete comment.
Furthermore, to produce a meaningful backtrace with FRAME_POINTER
enabled the kernel needs a specific function prologue:
mov ip, sp
stmfd sp!, {fp, ip, lr, pc}
sub fp, ip, #4
To get to the required prologue gcc uses apcs and no-sched-prolog.
This compiler options are not available on clang, and clang is not
able to generate the required prologue. Make the FRAME_POINTER
config symbol depending on !clang.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for Pro4, PXs2 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
VM tends to be a very overloaded term in KVM, so let's keep it
to describe the virtual machine. For the virtual memory setup,
let's use the "stage2" suffix.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
So far we have restricted the IPA size of the VM to the default
value (40bits). Now that we can manage the IPA size per VM and
support dynamic stage2 page tables, we can allow VMs to have
larger IPA. This patch introduces a the maximum IPA size
supported on the host. This is decided by the following factors :
1) Maximum PARange supported by the CPUs - This can be inferred
from the system wide safe value.
2) Maximum PA size supported by the host kernel (48 vs 52)
3) Number of levels in the host page table (as we base our
stage2 tables on the host table helpers).
Since the stage2 page table code is dependent on the stage1
page table, we always ensure that :
Number of Levels at Stage1 >= Number of Levels at Stage2
So we limit the IPA to make sure that the above condition
is satisfied. This will affect the following combinations
of VA_BITS and IPA for different page sizes.
Host configuration | Unsupported IPA ranges
39bit VA, 4K | [44, 48]
36bit VA, 16K | [41, 48]
42bit VA, 64K | [47, 52]
Supporting the above combinations need independent stage2
page table manipulation code, which would need substantial
changes. We could purse the solution independently and
switch the page table code once we have it ready.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
platform_nand_xxx definitions are just used by the plat_nand driver.
Let's move those definitions out of the core/driver-agnostic rawnand.h
header.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
We regularly have new NAND controller drivers that are making use of
fields/hooks that we want to get rid of but can't because of all the
legacy drivers that we might break if we do.
So, instead of removing those fields/hooks, let's move them to a
sub-struct which is clearly documented as deprecated.
We start with the ->IO_ADDR_{R,W] fields.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The docg4 driver has been removed. Remove the code that was registering
a docg4 device.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Let's make the raw NAND API consistent by patching all helpers and
hooks to take a nand_chip object instead of an mtd_info one or
remove the mtd_info object when both are passed.
In order to do that, we first need to update the platform_nand_ctrl
hooks to take a nand_chip object instead of an mtd_info.
We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip
conversion, but those will be dropped when patching nand_chip hooks to
take a nand_chip object.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
sama5d4_xplained, ssam9x5cm, sama5d2_ptc_ek and sama5d3_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our NAND flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
sama5d3_xplained, sam9x5cm, sama5d2_ptc_ek and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
sam9x5cm, sama5d2_ptc_ek, sama5d3_xplained and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:
http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.png
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Add SD controller nodes for LD4, Pro4, sLD8, Pro5, and PXs2.
This is also used as an eMMC controller for LD4, Pro4, and sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This code is no longer used. Remove it.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
mvebu soc for 4.20 (part 1)
- use dt_fixup to provide fallback for enable-method for Armada XP
- document the marvell,prestera compatible string
- update Thomas Petazzoni email in MAINTAINERS file
* tag 'mvebu-soc-4.20-1' of git://git.infradead.org/linux-mvebu:
dt-bindings: marvell,prestera: Add common compatible string
MAINTAINERS: replace free-electrons.com by bootlin.com for Thomas Petazzoni
ARM: mvebu: use dt_fixup to provide fallback for enable-method
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX SoC update for 4.20:
- Add ipg clock support in MMDC driver for registers access, so that
we will be safe even if the clock is not turned on by firmware.
- Register pm_power_off handler to provide power off support for iMX6
based boards with external PMIC.
- Add platform code support for i.MX 6ULZ SoC which is a derivative of
i.MX6ULL with some modules removed.
* tag 'imx-soc-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: add i.mx6ulz msl support
ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
ARM: imx: add mmdc ipg clock operation for mmdc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.
The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.
-----BEGIN PGP SIGNATURE-----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=bCXk
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Devicetree changes for omap variants
This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.
The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.
* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
ARM: dts: add omap3-gta04a5one to Makefile
ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
ARM: dts: am335x-boneblack: add cec support
ARM: dts: am3517-evm: Add support for UI board and Audio
ARM: dts: gta04: add serial console wakeup irq
ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
ARM: dts: omap: Update coresight bindings for hardware ports
ARM: dts: ti: Fix SPI and I2C bus warnings
ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
ARM: dts: dm8148-t410: get rid of phy_id property
ARM: dts: dm8148-evm: get rid of phy_id property
ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
ARM: dts: am57xx-idk-common: get rid of phy_id property
ARM: dts: dra7-evm: get rid of phy_id property
ARM: dts: dra71-evm: get rid of phy_id property
ARM: dts: dra72-evm-revc: get rid of phy_id property
ARM: dts: dra72-evm: get rid of phy_id property
ARM: dts: dra76-evm: get rid of phy_id property
ARM: dts: am437x-cm-t43: get rid of phy_id property
ARM: dts: am437x-gp-evm: get rid of phy_id property
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- updates the armada-xp-98dx3236 SoC and related boards to use the new
style dts bindings for nand
- add db-88f6820-amc board: plugin card for some of Marvell's switch
development kits
- fix SPI and I2C bus warnings coming with the new checks in dtc
- add new compatible string "marvell,prestera" to the armada-xp-98dx*
- fix sdhci supply property name on the clearfog (the '-supply' suffix
was missing)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCW7HlPQAKCRALBhiOFHI7
1WD8AKCdfJ2vxjsHeFJ5YEOA7JtdjJaaXwCffYZJ9IS0XblfyH9bsh9P/cy7nXI=
=CsQf
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.20 (part 1)
- updates the armada-xp-98dx3236 SoC and related boards to use the new
style dts bindings for nand
- add db-88f6820-amc board: plugin card for some of Marvell's switch
development kits
- fix SPI and I2C bus warnings coming with the new checks in dtc
- add new compatible string "marvell,prestera" to the armada-xp-98dx*
- fix sdhci supply property name on the clearfog (the '-supply' suffix
was missing)
* tag 'mvebu-dt-4.20-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: clearfog: fix sdhci supply property name
ARM: dts: mvebu: add "marvell,prestera" to PP nodes
ARM: dts: marvell: Fix SPI and I2C bus warnings
ARM: dts: mvebu: Add device tree for db-88f6820-amc board
ARM: dts: mvebu: db-xc3-24g4: use new style nand binding
ARM: dts: mvebu: db-dxbc2: use new style nand binding
ARM: dts: mvebu: 98dx3236: Rename nand controller node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
- Add Add SFF interface support for vf610-zii board.
- Disable unneeded devices like VPU and internal watchdog for imx51-zii
boards.
- Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
- Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
clocks information.
- Update iomux header for i.MX7 Solo and i.MX6 ULL.
- Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
- Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
- Switch to use SPDX-License-Identifier for more boards - vf610-twr,
imx7s-warp, Engicam boards.
- Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
the support for i.MX6 RIoTboard.
- DTC has new checks for SPI buses which will be landed on 4.20.
A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
- Switch i.MX7 device tree to use updated coresight binding for
hardware ports.
- Misc small or random update and cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbsb9RAAoJEFBXWFqHsHzObO8H/Al83K27UxL8XjKMOUsMooWX
BG5FfS9mDKOe8bN0BwZnUmrjuOOkNWooMxyahBXP9e0CWZnK/4G3OvTS83PNpA34
zE+Nm1oJia9zoUsWoCpBrvLrBJpjJqVajQiXzddUDgYLhbNXPXkiwBBEZqrwAJBK
CsgwRCj4qJA1WCetvwjYVVwtcVTCCnYcpx73YQMLK1sSbi0oVqtSMynSF3spzDVC
iduF+ur88lkjo0IK1PaWMOi8+G6E5bOV//4JJky5hNcTuMsmAAywmUEALoIYQjLr
EitPoTNi2FDnFDpGPqvsf51Cez6e+3iCAk0F5V6D+6nIvNDF9mGRdyqSnDhIyBY=
=B0Zy
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.20:
- New board support: Engicam's i.Core MX6 CPU module v1.5; ConnectCore
6UL Single Board Computer (SBC) Pro; i.MX6 ULZ based EVK board.
- Add Add SFF interface support for vf610-zii board.
- Disable unneeded devices like VPU and internal watchdog for imx51-zii
boards.
- Add 'no-sdio' and 'no-sd' property for vf610-zii-cfu1 board.
- Improve i.MX6 SLL GPIO support by adding gpio-ranges property and
clocks information.
- Update iomux header for i.MX7 Solo and i.MX6 ULL.
- Enable GPIO buttons as wakeup source for imx7d-sdb and imx6sx-sdb.
- Add GPIO keys and egalax touch screen support for imx6qdl-sabreauto.
- Switch to use SPDX-License-Identifier for more boards - vf610-twr,
imx7s-warp, Engicam boards.
- Add device tree bindings of 'fsl,pmic-stby-poweroff' property and add
the support for i.MX6 RIoTboard.
- DTC has new checks for SPI buses which will be landed on 4.20.
A patch from Rob to fix those 100+ warnings on i.MX boards. (Thanks!)
- Switch i.MX7 device tree to use updated coresight binding for
hardware ports.
- Misc small or random update and cleanup.
* tag 'imx-dt-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support
dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
ARM: dts: imx53-ppd: Remove 'num-chipselects' property
ARM: dts: vf610-twr: Switch to SPDX identifier
ARM: dts: vf: Switch to SPDX identifier
ARM: dts: imx6qdl-zii-rdu2: Disable the internal RTC
ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string
ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
ARM: dts: imx: Fix SPI bus warnings
ARM: dts: imx7: Update coresight binding for hardware ports
ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
ARM: dts: imx51-zii-scu2-mezz: Disable VPU
ARM: dts: imx51-zii-scu3-esb: Disable VPU
ARM: dts: imx51: Add label for VPU node
ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
ARM: dts: imx6: RIoTboard provide standby on power off option
dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=74RU
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.20
* Fix IRQ constants usage on MSM8974
* Add led, gpio-button, sdcc, and pcie nodes for IPQ8064
* Move/cleanup common nodes for IPQ8064
* Add i2c sensor nodes for MSM8974 Hammerhead
* Fixes for SAW, kpss, opp, pci range, and space/tab on IPQ4019
* Update coresight bindings
* tag 'qcom-dts-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Update coresight bindings for hardware ports
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom: ipq4019: fix space vs tab indenting inside qcom-ipq4019.dtsi
ARM: dts: qcom: ipq4019: fix PCI range
ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
ARM: dts: qcom: ipq4019: add cpu operating points for cpufreq support
ARM: dts: qcom: ipq4019: use v2 of the kpss bringup mechanism
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity
ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515
ARM: dts: qcom: Add led and gpio-button nodes to ipq8064 boards
ARM: dts: qcom: Move common nodes to ipq8064-v.1.0.dtsi
ARM: dts: qcom: Add sdcc nodes for ipq8064
ARM: dts: qcom: Add pcie nodes for ipq8064
ARM: dts: qcom-msm8974: change invalid flag IRQ NONE to valid value
ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE
ARM: dts: qcom-msm8974: use named constant for interrupt flag LEVEL HIGH
ARM: dts: qcom-msm8974: use named constant for interrupt flag EDGE RISING
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_SPI
ARM: dts: qcom-msm8974: use named constant for interrupt type GIC_PPI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Our usual bunch of DT patches for the Allwinner arm32 SoCs.
The most notable changes are:
- Support for the video decoding / encoding engine on the
A10s/A13/A20/A33
- IR support for the A83t
- SATA support for the R40
-----BEGIN PGP SIGNATURE-----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=vyaf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.20
Our usual bunch of DT patches for the Allwinner arm32 SoCs.
The most notable changes are:
- Support for the video decoding / encoding engine on the
A10s/A13/A20/A33
- IR support for the A83t
- SATA support for the R40
* tag 'sunxi-dt-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun9i: Fix I2C bus warnings
ARM: dts: sunxi: Fix I2C bus warnings
ARM: dts: sun8i-a33: Add Video Engine and reserved memory nodes
ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes
ARM: dts: sun5i: Add Video Engine and reserved memory nodes
ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
ARM: dts: sun8i: r40: add sata node
ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra
ARM: dts: sun8i: a83t: bananapi-m3: Enable IR controller
ARM: dts: sun8i: a83t: Add support for the cir interface
ARM: dts: sun8i: a83t: Add the cir pin for the A83T
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAluvhigACgkQ0rTAlCFN
r3SHzA/+IsYaAQgvy8NE7Ok1rhy/OU7eLPjd2JVqBgJ6SwCkcM4eW7Zol6SoMawG
Wt9Bh+1JFvyzi4GiftwL/rPzOh2rxjuuDZMmLo5sZBztTLoFmKv9XIYgjnv8kVJY
WXQ5Z3BOKA0H6lyIw6jinS6uotTGiWhtvihOpoAeus8pHJ/AWo3lbntb0tdPob7b
fA95Dsm5ddqhPonrkqq1WEJ+Yepetoa7m2U2dJLOUHPaX8AmIm4GgQNoA6MEVYRJ
0sZ/FDhe+5yvDRKbebVRrlqITGgwEYuTPYO1zQEQleQo6SPEvJuUOo+CW5R3Pgqc
sKk5UxohaAvxbATt5gYhqTl4GwSKkMrNdJroVTc3bf8CekwxgpnNoV2nszGQSrjH
yU2Nwy0d2ok4ZacxoFBjosbGWYh2UuqAlv7lX/UPr79GbeJpA9IUDXQxBGJoodTH
0Wy3rUSgAUU/nRfsaDZtkLqIB8/keiSZzWV97aCnIUGHWk00MfnB8nzhkU1YEel0
8Lbqh+9NY4+P3Ps4UxsnOIL0LQZt2Twf738GF/boa4RftYQOUJJQmvNO8TpFL0OK
VKe10hX0trfsNOv2Ws7oTsGrLZXqLsB8r6jjsSX84NR2Dft2CYj8s7u2lpnmFTxd
ciBjzeyFb4TbYW2iYOsYLRaei0w8GSNMdHShNU04fO/zh1dP8lU=
=AJmQ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3 and H5 DT additions for 4.20
This is our usual H3/H5 pull request
The most notable changes are:
- the video decoding / encoding unit is finally enabled on the H3
- Mali support for the H5
- New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
* tag 'sunxi-h3-h5-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees
ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes
arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block
arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support
nvmem: sunxi-sid: add support for H5's SID controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB3 and USB2 phys implemented in UniPhier SoCs.
These phys are necessary for dwc3 and ehci controllers driving
the USB ports on Pro4 and PXs2 SoCs.
Since the USB host drivers are already built-in, so only the phy
driver are missing to allow booting with USB devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
