IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The new BCM5760X chips will generate this new TX timestamp completion
when a TX packet's timestamp has been taken right before transmission.
The driver logic to retrieve the timestamp will be added in the next
few patches.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Octeontx2 hardware uses Near Data Cache(NDC) block to cache
contexts in it so that access to LLC/DRAM can be avoided.
It is recommended in HRM to sync the NDC contents before
releasing/resetting LF resources. Hence implement NDC_SYNC
mailbox and sync contexts during driver teardown.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call phylink_ethtool_ksettings_get() for get_link_ksettings method and
ethtool_op_get_link() for get_link method.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=0BtN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
tcp_metrics: add netlink protocol spec in YAML
Add a netlink protocol spec for the tcp_metrics generic netlink family.
First patch adjusts the uAPI header guards to make it easier to build
tools/ with non-system headers.
v1: https://lore.kernel.org/all/20240626201133.2572487-1-kuba@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a protocol spec for tcp_metrics, so that it's accessible via YNL.
Useful at the very least for testing fixes.
In this episode of "10,000 ways to complicate netlink" the metric
nest has defines which are off by 1. iproute2 does:
struct rtattr *m[TCP_METRIC_MAX + 1 + 1];
parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a);
for (i = 0; i < TCP_METRIC_MAX + 1; i++) {
// ...
attr = m[i + 1];
This is too weird to support in YNL, add a new set of defines
with _correct_ values to the official kernel header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_metrics' header lacks the customary _UAPI in the header guard.
This makes YNL build rules work less seamlessly.
We can easily fix that on YNL side, but this could also be
problematic if we ever needed to create a kernel-only tcp_metrics.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 3e7013ddf55a ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to
indicate link status and activity. Add minimal LED controller driver
supporting the most common uses with the 'netdev' trigger.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial null pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port struct
members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZoHMzwAKCRDJZDGjmcZN
cj4wAP4nHi3Jr/ezwrIahwMGXV/VSlUhxOakj3OADdHe5spIogD/SrR8Uz7/m5QC
sMF0Rd2L7tfrQSDdJ/MztBi7cVprtQo=
=lnku
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f434a ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
-----BEGIN PGP SIGNATURE-----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=JlIv
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
The kernel test robot reported that clang no longer compiles the 32-bit
x86 kernel in some configurations due to commit 95ece48165c1
("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}()
functions").
The build fails with
arch/x86/include/asm/cmpxchg_32.h:149:9: error: inline assembly requires more registers than available
and the reason seems to be that not only does the cmpxchg8b instruction
need four fixed registers (EDX:EAX and ECX:EBX), with the emulation
fallback the inline asm also wants a fifth fixed register for the
address (it uses %esi for that, but that's just a software convention
with cmpxchg8b_emu).
Avoiding using another pointer input to the asm (and just forcing it to
use the "0(%esi)" addressing that we end up requiring for the sw
fallback) seems to fix the issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406230912.F6XFIyA6-lkp@intel.com/
Fixes: 95ece48165c1 ("locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions")
Link: https://lore.kernel.org/all/202406230912.F6XFIyA6-lkp@intel.com/
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-and-Tested-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some small driver fixes for 6.10-rc6. Included in here are:
- IIO driver fixes for reported issues
- Counter driver fix for a reported problem.
All of these have been in linux-next this week with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFlrA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymiMQCgkUmsCT9KQDt+/IqClfL+A6nBvUkAn08jRwGA
dXjTvroHgHsNCU/VXMwV
=FcWr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.10-rc6. Included in here are:
- IIO driver fixes for reported issues
- Counter driver fix for a reported problem.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: ti-eqep: enable clock at probe
iio: chemical: bme680: Fix sensor data read operation
iio: chemical: bme680: Fix overflows in compensate() functions
iio: chemical: bme680: Fix calibration data variable
iio: chemical: bme680: Fix pressure value output
iio: humidity: hdc3020: fix hysteresis representation
iio: dac: fix ad9739a random config compile error
iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
iio: adc: ad7266: Fix variable checking bug
iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
Here are 2 small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFmKA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk5fgCfaPNg7ikwjRrmgUJbN/e9wx99T90AoL+/iJws
4xL+J3dALmGWTPBqBnNA
=pIxW
-----END PGP SIGNATURE-----
Merge tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 6.10-rc6, both for the
vc04_services drivers:
- build fix if CONFIG_DEBUGFS was not set
- initialization check fix that was much reported.
Both of these have been in linux-next this week with no reported
issues"
* tag 'staging-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix build if CONFIG_DEBUG_FS is not set
staging: vc04_services: vchiq_arm: Fix initialisation check
Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet. Everyone agreed to just revert
them for now and will work on making them better for a future
release instead of trying to quick fix the existing changes this
late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFmvg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymziACgvoDTxuDHHfPOd6h/1qrHqYpFK1YAn2IDMJGj
Ng4/I/gwnkJeeHQC5JSn
=g9o4
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / console fixes from Greg KH:
"Here are a bunch of fixes/reverts for 6.10-rc6. Include in here are:
- revert the bunch of tty/serial/console changes that landed in -rc1
that didn't quite work properly yet.
Everyone agreed to just revert them for now and will work on making
them better for a future release instead of trying to quick fix the
existing changes this late in the release cycle
- 8250 driver port count bugfix
- Other tiny serial port bugfixes for reported issues
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "printk: Save console options for add_preferred_console_match()"
Revert "printk: Don't try to parse DEVNAME:0.0 console options"
Revert "printk: Flag register_console() if console is set on command line"
Revert "serial: core: Add support for DEVNAME:0.0 style naming for kernel console"
Revert "serial: core: Handle serial console options"
Revert "serial: 8250: Add preferred console in serial8250_isa_init_ports()"
Revert "Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports"
Revert "serial: 8250: Fix add preferred console for serial8250_isa_init_ports()"
Revert "serial: core: Fix ifdef for serial base console functions"
serial: bcm63xx-uart: fix tx after conversion to uart_port_tx_limited()
serial: core: introduce uart_port_tx_limited_flags()
Revert "serial: core: only stop transmit when HW fifo is empty"
serial: imx: set receiver level before starting uart
tty: mcf: MCF54418 has 10 UARTS
serial: 8250_omap: Implementation of Errata i2310
tty: serial: 8250: Fix port count mismatch with the device
Here are a handful of small USB driver fixes for 6.10-rc6 to resolve
some reported issues. Included in here are:
- typec driver bugfixes
- usb gadget driver reverts for commits that were reported to have
problems
- resource leak bugfix
- gadget driver bugfixes
- dwc3 driver bugfixes
- usb atm driver bugfix for when syzbot got loose on it
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZoFnUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3ggCgyM2B+cIOH4FtyWi7FfXj8XjDsjIAoKzX45+o
TO/pSGQhRwx9PeFfDISM
=pFEO
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a handful of small USB driver fixes for 6.10-rc6 to resolve
some reported issues. Included in here are:
- typec driver bugfixes
- usb gadget driver reverts for commits that were reported to have
problems
- resource leak bugfix
- gadget driver bugfixes
- dwc3 driver bugfixes
- usb atm driver bugfix for when syzbot got loose on it
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: core: Workaround for CSR read timeout
Revert "usb: gadget: u_ether: Replace netif_stop_queue with netif_device_detach"
Revert "usb: gadget: u_ether: Re-attach netif device to mirror detachment"
usb: gadget: aspeed_udc: fix device address configuration
usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
usb: typec: ucsi: glink: fix child node release in probe function
usb: musb: da8xx: fix a resource leak in probe()
usb: typec: ucsi_acpi: Add LG Gram quirk
usb: ucsi: stm32: fix command completion handling
usb: atm: cxacru: fix endpoint checking in cxacru_bind()
usb: gadget: printer: fix races against disable
usb: gadget: printer: SS+ support
- Make sure CPU hotplug dynamic prepare states are actually executed
-----BEGIN PGP SIGNATURE-----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=qGvT
-----END PGP SIGNATURE-----
Merge tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Fix "nosmp" and "maxcpus=0" after the parallel CPU bringup work went
in and broke them
- Make sure CPU hotplug dynamic prepare states are actually executed
* tag 'smp_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Fix broken cmdline "nosmp" and "maxcpus=0"
cpu/hotplug: Fix dynstate assignment in __cpuhp_setup_state_cpuslocked()
initialized even if the number of CPUs has been limited by a cmdline param
- Make sure interrupt lines on liointc hw are configured properly even when
interrupt routing changes
- Avoid use-after-free in the error path of the MSI init code
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaBFiwACgkQEsHwGGHe
VUpxMA//QjUEdRe93t4jwcdYKjEPgPHEi+JBgL+tpTrrHUS5xrhLRhFGk7oDBG+u
hUMN1NzoPc/Qy8TStjC/rMgwH+NbHyTCb6q0K9ORLtkaZLLz6zlpqQuLiCrd1sMJ
GIztWw4WgvwkZVcFk1MiKfGyIbMBHbicYXEu64ymhkQ30aM1fID/gWvFs8pvaJNg
MnQ3APt45SoywHyqsqNYMr7G1al0Z/OgTf/MTH8R9QDFCnCo99cgWIU83yr9lNQP
z4HZaFSgkIE2Rfc5fsh9wA/K4iqIId06Fx/f4sF5BUXaVPhjUTSv9tIZSVfXfpsS
CuophjzKp5g05LIZUI32DZ+OEZpfR8DVdN6L8bhob5niJ0XqPVhkKf2ctHlmqP+p
FiRN/1SnZaz+ZbLtIV2groyRvD1N/DeDOZfbuCIyj0OhkrxC16XF3Olzb3ayuQXO
n3xXnFMTRmKzTMWQTjS7gMSPEwnImvLsBUhD/Qc7Ka2eiceEm/Q5yziptyYUX+/f
/W0b95rvXcMQMRcCcgwDTHvOV31UOWC0WzDNwZTksyhtNvFXd8MtDmlOE4KAGDyD
hFNNkxJSovtoTB2ogehsUX2QO09yEFirYqntnAmu3Xih56sg3PBcMZOU4O/5dwyw
2nUUJe1p1lvRf5MVd9re9uWxPvv3CYEAiPbHL8S4HEH8etajywg=
=Hh3B
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure multi-bridge machines get all eiointc interrupt controllers
initialized even if the number of CPUs has been limited by a cmdline
param
- Make sure interrupt lines on liointc hw are configured properly even
when interrupt routing changes
- Avoid use-after-free in the error path of the MSI init code
* tag 'irq_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Fix UAF in msi_capability_init
irqchip/loongson-liointc: Set different ISRs for different cores
irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()
-----BEGIN PGP SIGNATURE-----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=et0y
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Warn when an hrtimer doesn't get a callback supplied
* tag 'timers_urgent_for_v6.10_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Prevent queuing of hrtimer without a function callback
Sometimes, the on-disk metadata might be invalid due to user
interrupts, storage failures, or other unknown causes.
In that case, z_erofs_map_blocks_iter() may still return a valid
m_llen while other fields remain invalid (e.g., m_plen can be 0).
Due to the return value of z_erofs_scan_folio() in some path will
be ignored on purpose, the following z_erofs_scan_folio() could
then use the invalid value by accident.
Let's reset m_llen to 0 to prevent this.
Link: https://lore.kernel.org/r/20240629185743.2819229-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Bugfixes:
- SUNRPC one more fix for the NFSv4.x backchannel timeouts
-----BEGIN PGP SIGNATURE-----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=c5Ek
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust:
- One more SUNRPC fix for the NFSv4.x backchannel timeouts
* tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix backchannel reply, again
* Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
* Do not align cow fork delalloc to cowextsz hint when running low on space.
* Allow zero-size symlinks and directories as long as the link count is
zero.
* Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl was
introduced during v6.10 developement cycle.
* xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZnvYdwAKCRAH7y4RirJu
9DRmAP9VwmSgBrVGZ459K6LluP12FoIpzUljEYSiQiyjhxuQJgD/fou/8G+/TTQH
3TtdmC8Xo7SWRMq9+wPpH5OywbsvZQM=
=fV8d
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
- Do not align cow fork delalloc to cowextsz hint when running low on
space.
- Allow zero-size symlinks and directories as long as the link count is
zero.
- Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
was introduced during v6.10 developement cycle.
- xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
xfs: fix freeing speculative preallocations for preallocated files
of the previous wmt-driver
-----BEGIN PGP SIGNATURE-----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=pKpi
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for the testunit and and a fixup for the code reorganization
of the previous wmt-driver"
* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
i2c: viai2c: turn common code into a proper module
Highlights:
- Fix lg-laptop driver not working with 2024 LG laptop models
- Add missing MODULE_DESCRIPTION() macros to various modules
- nvsw-sn2201: Add check for platform_device_add_resources
The following is an automated git shortlog grouped by driver:
add missing MODULE_DESCRIPTION() macros:
- add missing MODULE_DESCRIPTION() macros
lg-laptop:
- Use ACPI device handle when evaluating WMAB/WMBB
- Change ACPI device id
- Remove LGEX0815 hotkey handling
platform/mellanox:
- nvsw-sn2201: Add check for platform_device_add_resources
platform/x86/intel:
- add missing MODULE_DESCRIPTION() macros
platform/x86/siemens:
- add missing MODULE_DESCRIPTION() macros
wireless-hotkey:
- Add support for LG Airplane Button
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZ/6kUUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z+ywf/dQ9UqyJqejtRHrXjYYZqQyT/xXv9
8aCMXA/U7RPxnIP8Fwkb3hQXW4TMUMYrsz3sHxhCWiyb8fXBgEbrVxDVbIjehnf3
HZRVw/JeFqHe/bIp3QmOH05FSMdBWY34hhsm4dPEYyUiUUPN78ec7bekZ7ERMoFi
u3+jKUxIKlcqGqO6E0NtpLmz6Ltu07C5SHgvgpafs8FLuWTvr6dnbKMWB5k/1oCo
qn8aXopWsBclaPTPI/ehtHvPnWX9bhuTz0oQjZGrGJQmaVoo81guFLe+Ag2nKPNU
mhQQUvUKdDg6ojuSX7Hmtb7pBIP0noxHxuAXll0gePQXjpyJ0Pe07HlNMw==
=iWe/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix lg-laptop driver not working with 2024 LG laptop models
- Add missing MODULE_DESCRIPTION() macros to various modules
- nvsw-sn2201: Add check for platform_device_add_resources
* tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: add missing MODULE_DESCRIPTION() macros
platform/x86/intel: add missing MODULE_DESCRIPTION() macros
platform/x86/siemens: add missing MODULE_DESCRIPTION() macros
platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB
platform/x86: lg-laptop: Change ACPI device id
platform/x86: lg-laptop: Remove LGEX0815 hotkey handling
platform/x86: wireless-hotkey: Add support for LG Airplane Button
platform/mellanox: nvsw-sn2201: Add check for platform_device_add_resources
- moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"
- sdhci: Do not invert write-protect twice
- sdhci: Do not lock spinlock around mmc_gpio_get_ro()
- sdhci-pci/sdhci-pci-o2micro: Return proper error codes
- sdhci-brcmstb: Fix support for erase/trim/discard
-----BEGIN PGP SIGNATURE-----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=gj1M
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"
- sdhci: Do not invert write-protect twice
- sdhci: Do not lock spinlock around mmc_gpio_get_ro()
- sdhci-pci/sdhci-pci-o2micro: Return proper error codes
- sdhci-brcmstb: Fix support for erase/trim/discard
* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
mmc: sdhci: Do not invert write-protect twice
Revert "mmc: moxart-mmc: Use sg_miter for PIO"
mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
Edward Cree says:
====================
ethtool: track custom RSS contexts in the core
Make the core responsible for tracking the set of custom RSS contexts,
their IDs, indirection tables, hash keys, and hash functions; this
lets us get rid of duplicative code in drivers, and will allow us to
support netlink dumps later.
This series only moves the sfc EF10 & EF100 driver over to the new API;
other drivers (mvpp2, octeontx2, mlx5, sfc/siena, bnxt_en) can be converted
afterwards and the legacy API removed.
====================
Link: https://patch.msgid.link/cover.1719502239.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core now always satisfies 'ethtool -x context nonzero' from its own
tracking, so our lookup code for that case is never called. Remove it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/b426fcc416dedc8f203e52eebef6891eccebe4c1.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 'ethtool -x' with rss_context != 0, instead of calling the driver to
read the RSS settings for the context, just get the settings from the
rss_ctx xarray, and return them to the user with no driver involvement.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/2d0190fa29638f307ea720f882ebd41f6f867694.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core is now responsible for allocating IDs and a memory region for
us to store our state (struct efx_rss_context_priv), so we no longer
need efx_alloc_rss_context_entry() and friends.
Since the contexts are now maintained by the core, use the core's lock
(net_dev->ethtool->rss_lock), rather than our own mutex (efx->rss_lock),
to serialise access against changes; and remove the now-unused
efx->rss_lock from struct efx_nic.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/150274740ea8cc137fef5502541ce573d32fb319.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While this is not needed to serialise the ethtool entry points (which
are all under RTNL), drivers may have cause to asynchronously access
dev->ethtool->rss_ctx; taking dev->ethtool->rss_lock allows them to
do this safely without needing to take the RTNL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/7f9c15eb7525bf87af62c275dde3a8570ee8bf0a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new API to create/modify/remove RSS contexts, that passes in the
newly-chosen context ID (not as a pointer) rather than leaving the
driver to choose it on create. Also pass in the ctx, allowing drivers
to easily use its private data area to store their hardware-specific
state.
Keep the existing .set_rxfh API for now as a fallback, but deprecate it
for custom contexts (rss_context != 0).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/45f1fe61df2163c091ec394c9f52000c8b16cc3b.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since drivers are still choosing the context IDs, we have to force the
XArray to use the ID they've chosen rather than picking one ourselves,
and handle the case where they give us an ID that's already in use.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/801f5faa4cec87c65b2c6e27fb220c944bce593a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each context stores the RXFH settings (indir, key, and hfunc) as well
as optionally some driver private data.
Delete any still-existing contexts at netdev unregister time.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/cbd1c402cec38f2e03124f2ab65b4ae4e08bd90d.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which
currently contains only the wol_enabled field.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a562278371de7534ed1eb17531838ca090633.1719502239.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
selftests: drv-net: add ability to schedule cleanup with defer()
Introduce a defer / cleanup mechanism for driver selftests.
More detailed info in the second patch.
====================
Link: https://patch.msgid.link/20240627185502.3069139-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This implements what I was describing in [1]. When writing a test
author can schedule cleanup / undo actions right after the creation
completes, eg:
cmd("touch /tmp/file")
defer(cmd, "rm /tmp/file")
defer() takes the function name as first argument, and the rest are
arguments for that function. defer()red functions are called in
inverse order after test exits. It's also possible to capture them
and execute earlier (in which case they get automatically de-queued).
undo = defer(cmd, "rm /tmp/file")
# ... some unsafe code ...
undo.exec()
As a nice safety all exceptions from defer()ed calls are captured,
printed, and ignored (they do make the test fail, however).
This addresses the common problem of exceptions in cleanup paths
often being unhandled, leading to potential leaks.
There is a global action queue, flushed by ksft_run(). We could support
function level defers too, I guess, but there's no immediate need..
Link: https://lore.kernel.org/all/877cedb2ki.fsf@nvidia.com/ # [1]
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exception handlers print the result and use continue
to skip the non-exception result printing. This makes
inserting common post-test code hard. Refactor to
avoid the continues and have only one ktap_result() call.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add .get_channel to enic_ethtool_ops to enable basic ethtool -l
support to get the current channel configuration.
Note that the driver does not support dynamically changing queue
configuration, so .set_channel is intentionally unused. Instead, users
should use Cisco's hardware management tools (UCSM/IMC) to modify
virtual interface card configuration out of band.
Signed-off-by: Jon Kohler <jon@nutanix.com>
Link: https://patch.msgid.link/20240627202013.2398217-1-jon@nutanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.
Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:
struct stats_query_entry query[FP_SB_MAX_E1x+
BNX2X_FIRST_QUEUE_QUERY_IDX];
FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.
This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
* device (HW/FW). Each fast-path status block (FP-SB) aka non-default
* status block represents an independent interrupts context that can
* serve a regular L2 networking queue. However special L2 queues such
* as the FCoE queue do not require a FP-SB and other components like
* the CNIC may consume FP-SB reducing the number of possible L2 queues
*
* If the maximum number of FP-SB available is X then:
* a. If CNIC is supported it consumes 1 FP-SB thus the max number of
* regular L2 queues is Y=X-1
* b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
* c. If the FCoE L2 queue is supported the actual number of L2 queues
* is Y+1
* d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
* slow-path interrupts) or Y+2 if CNIC is supported (one additional
* FP interrupt context for the CNIC).
* e. The number of HW context (CID count) is always X or X+1 if FCoE
* L2 queue is supported. The cid for the FCoE L2 queue is always X.
*/
However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support").
Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver
was later updated to take full advantage of the E2 instead of having it be
limited to the capabilities of the E1x. But as far as we can tell, the
array "stats_query_entry query" was still limited to using the FP-SB
available to the E1x cards as part of an oversignt when the driver was
updated to take full advantage of the E2, and now with the driver being
aware of the greater queue size supported by E2 NICs, it causes the UBSAN
warnings seen in the stack traces below.
This patch increases the size of the "stats_query_entry query" array by
replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle
both types of NICs.
Stack traces:
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11
index 20 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11
index 28 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8
index 29 is out of range for type 'stats_query_entry [19]'
CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Workqueue: bnx2x bnx2x_sp_task [bnx2x]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x]
bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x]
? bnx2x_hw_stats_post+0x231/0x250 [bnx2x]
bnx2x_stats_start+0x44/0x70 [bnx2x]
bnx2x_stats_handle+0x149/0x350 [bnx2x]
bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x]
bnx2x_sp_task+0x491/0x5c0 [bnx2x]
process_one_work+0x18d/0x3f0
</TASK>
---[ end trace ]---
Fixes: 50f0a562f8cc ("bnx2x: add fcoe statistics")
Signed-off-by: Ghadi Elie Rahme <ghadi.rahme@canonical.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240627111405.1037812-1-ghadi.rahme@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the existing test to exercise UDP GSO egress through devices with
various offload capabilities, including lack of checksum offload, which is
the default case for TUN/TAP devices.
Test against a dummy device because it is simpler to set up then TUN/TAP.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626-linux-udpgso-v2-2-422dfcbd6b48@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
